FCP installed, but no MPEG2 option

I've installed Final Cut Studio on my Macbook but when I went to Quicktime to export an MPEG2 file, it wasn't an option. I uninstalled Compressor and DVD Studio Pro, then reinstalled. Still no MPEG2 option.
I know the MPEG2 option is part of the FCP installation. But for some reason, I'm not getting it.
Help?!

I found the component on my G5 and copied it to my Macbook, but it still doesn't show up as an option. All I can think of is to wipe all remnants of FCP studio off my drive and start over.
To see if you have it:
Go to the main hard
drive-->System-->Library-->Quicktime-->
QuicktimeMPEG2.component......
It may be on the FCP disc and you might have to
install it manually. I can't remember how it was
installed...

Similar Messages

I installed the update but the "radio" option is not showing up in Music. Anyone else had this issue?

I installed the update but the "radio" option is not showing up in Music. Anyone else had this issue?

It is only available in the U.S right now. Are you in the U.S.?

Cannot install Acrobat X Pro. AAM says "installed" - but no sign of the "Launch app" option.

The Adobe Application Manager states Acrobat X Pro is installed but there is no "Launch App" option.
I have succesfully installed Ai, Ps and Id, but Acrobat X Pro is giving me a headache!
The app installed with a warning and 2 errors. (I did not save the text about this event - and I cannot repeat the operation that led me there,)
I can recall some detail from the text:
• The installer could not remove data from an (old?) file from my Acrobat 9 installation.
• There was a reference to the installer "lacking permission(s)" for some operation.
• Also, some reference to my computer not supporting several "requirements".
I have since uninstalled my Acrobat 9 installation, but cannot uninstall Acrobat X Pro. (It is not listed under "Programs & Features".)
I also cannot re-install Acrobat X Pro - the AAM won't let me.
Any ideas? Can I download a trial-copy, then try to install that? Would it be recognized by the AAM?
joeb_mtl

Thank you, Baljeet - that worked well - However, the now installed Acrobat X Pro version 10,1.1.33 apparently needs a update/patch to upgrade Acrobat to vs. 10.1.3, and after much effort and many forum-suggested fixes, I cannot complete the update. (It "rolls-back" and reports an Error 1310. Error writing to file: C:\Config.Msi\2c4f05.rbf. Verify.......access to that directory.")
I have also received the same ("1310") error, but referencing a lack of sufficient "permission to modify....a certain file". (I can't now recall which file.)
To further complicate matters, my Secunia P.S. Inspector app also reported the need for an update - which did not complete either. It is now perpetually "Waiting for update to complete".
I hope you can solve this problem too! Thanks.
joeb_mtl
Message was edited by: joeb_mtl
I failed to tell you my OS is WIN 7 SP1 HomePremium, 64-bit, 3.0GHz Processor, 8GB RAM, 274 GB available hard-disk space, 1920 × 1080 Screen resolution, Pioneer DVD-Rom drive, IE 8, Dual GeForce 8800GTX video cards.

I installed the latest update for photoshop CC but the new options (like spin or path blur) are still not active. What to do?

Yesterday, installed the new updates for Photoshop CC. Photoshop tells me that it is up to date with all updates installed but still I can't use them, e.g. the blur gallery doesn't show the spin or path blur. Other new options are also not working. What should I do?

Look for Photoshop CC (2014) in your Creative Cloud application, and press the [ Update ] button next to it (which is in itself more confusing).
-Noel

Cs6 is telling me to re install but it is not an option on the cloud, any suggestions?

cs6 is telling me to re install but it is not an option on the cloud, any suggestions?

Which CS6 program is giving you the message? What is the exact error message you are getting?
-Dave

I downloaded ADE today on my Mac but I cannot open it. It is showing up as a disk and is only giving me the option to install but not open.

I downloaded ADE today on my Mac but I cannot open it. It is showing up as a disk and is only giving me the option to install but not open. Help.

After installation, you'll be able to open ADE.

I've have just purchased FCP-X, but it is taking a very long time to install. It has been at it for over an hour. Does that seem right? Tahnks.

I've have just purchased FCP-X, but it is taking a very long time to install. It has been at it for over an hour. Does that seem right? Thanks.

It's about a 2.5G file. How fast is your connection? There should be a progress bar in the App Store next to the app. You should also see a progress bar on your computer, depending on the OS.

Hi I have downloaded compressor4 from Apps store but it won't open - says compressor not properly installed. The reason for my purchase was that compressor 3 stopped working. I tried to reinstall from the FCP disk but it was 'greyed out'.

Hi I have downloaded compressor4 from Apps store but it won't open - says compressor not properly installed. The reason for my purchase was that compressor 3 stopped working. I tried to reinstall from the FCP disk but it was 'greyed out'. I followed suggestions from the apple site to clear various library files - mainly relating to Qmaster but this didn't make any difference, an iwonder igf perhaps this is the reason for the compressor 4 programme not working. Thanks
Tom

You need to export a self-contained video from FCP 6. Import the self-contain video into Compressor 4.
•iMac 27", 3.4GHz Quad-Core Intel Core i7, 16GB 1333MHz DDR3, 2TB HD + 256GB SSD, AMD Radeon HD 6970M 2GB GDDR5•FCS 3•Compressor 4•OS X 10.7 (Lion)•iPad 1&2•Apple Tv 2•

Putting back MPEG2 Option in Final Cut Pro

Ok guys and gals, please help! I desperately want to put back the MPeg2 option back in Final Cut Pro. I just installed Final Cut Studio 6.1 and yes, I realize it deleted the option. But I really want it back, and no, I dont want to embrace Compressor at this time. Does anyone know a work-around on how to do this? I tried reinstalling previous versions but no luck. Final Cut 3.0 puts it back in..but on my husbands mac, he was able to somehow KEEP the option in Final Cut 6.0!!! Driving me crazy...please help if you can. THANKS!! I'm working with a brand new Imac with the latest version of Tiger.

NO one here but us Editors and fellow FCP users.
You need to post your request here:
http://www.apple.com/feedback/finalcutpro.html
Shane
Author, "GETTING ORGANIZED WITH FINAL CUT PRO"
“I may receive some form of compensation, financial or otherwise, from my recommendation or link.”

No MPEG2 option when Exporting!

I have Final Cut Studio Academic Edition and so do various other friends I have. Of my friends I am the only one who does NOT have an option to Export to MPEG2 from Final Cut Pro when you click on Quicktime Conversion method. Do I need to re-install Final Cut Studio?? If so, how do I completely uninstall Final Cut Studio, including settings and my serial to do a complete fresh install?

I have Final Cut Studio Academic Edition and so do
various other friends I have. Of my friends I am the
only one who does NOT have an option to Export to
MPEG2 from Final Cut Pro when you click on Quicktime
Conversion method.
///It depends which version of FCP you have. When the latest version FCP 5 was introduced, they took away the MPEG2 option. With FCP you have to use Compressor, which caused me a certain amount of frustration.
If you have an earlier version of FCP, not sure about the exact number, because I am relatively new at this, but if you have a registerd copy of Studio DVD Pro installed, you will be have the MPEG2 option.
If you have an earlier verision of FCP, and you do not have the MPEG2 option, you may want to reinstall Studio DVD Pro.
Studio?? If so, how do I completely uninstall Final
Cut Studio, including settings and my serial to do a
complete fresh install?
I'm guessing here, but I would suggest using Spotlight to find any preferences for final cut pro and trashing them, plus the application itself. You might even want to trash the receipts for FCP as well.
Hope this helps.
Hank Kearns
Power Mac G4

Installed but not found on computer

I've successfully installed the latest 10.1 for my 64-bit laptop with Windows 7. A check by Adobe confirms that it was properly installed, and that I have the correct version for my computer.
AND YET, there is no icon for it anywhere, it doesn't come up on my list of Programs, when I enter "Adobe Flash Player" in the search bar it shows no such program, and when I try to play a FLV file, it won't give me Flash Player as an option. So..... I have it on my computer, but I apparently am not allowed to see it or access it?
I've uninstalled and re-installed several times, and cannot for the life of me figure out what the problem is. Any help for this maddening situation?

Hi,
Yes, I read his comments and I made sure Shockwave Flash Object was enabled in IE as he suggested. I am trying to make a flip book. One of the posts here in the forum said to make a SWF file, which I did. But now I can't figure out how to do anything with it. I thought Flash Reader was the right program to look at it, but maybe I'm wrong? Maybe I need Flash itself? The flip book thing has me pretty frustrated and confused. All the sites and software I've tried are poor quality. I was hoping I could figure out how to do it through Adobe to get better quality.
1. Oct 17, 2010 1:30 PM in response to: jonstrebler
Re: Installed but not found on computer
Hi, Flash Player is a browser plugin, not a stand alone Player. You should have Shockwave Flash Object in add ons in IE and make sure it is enabled.
Your Flash files are in C:\Windows\SysWOW64\Macromed\Flash
You may want the Adobe Media Player:http://www.adobe.com/products/mediaplayer/
Hope that helps,
eidnolb

Had to uninstall iWork trial since I bought the pages app and it wouldn't let me print or save. Now the app store says I have pages installed but I can't find it anywhere to open and use it. I'm not very computer savvy and am getting frustrated!

Ooops, guess I didn't need to post everything in the title - sorry! I bought the pages app - but couldn't save or print so with some online searching found that I had to uninstall the iWork trial which had expired. I did that - but now I can't figure out how to re-install the pages app!! The app store says it's installed, but I can't find it anywhere to open and use it. I'm not very computer savvy - and am a first time Mac user and am getting extremely frustrated! I e-mailed some help center and they can't seem to help me either. I would appreciate any help/advice that can fix my problem - thanks in advance!!

OK Apple has stuffed up the demo version upgrade process so the first thing you need to do is get rid of the demo.
That includes getting rid of the files in the system.
The instructions how to do that are here:
Note That where you see / that is the sequence of folders, each nested inside each other.
User/Library/Preferences the com.apple.iwork.Keynote.plist
Means the User (you, the little home icon, whatever you are called on your computer) then the Library folder inside that and then the Preferences folder inside that.
Lion initially hides the System folders from you so you have to go to the Finder > Menu > hold down the option key and click on GO > Library to see it.
Peter

Hi, I had an update massage for a wile on my phone and yesterday I decided to do the update and so I downloaded the soft w. and started to install but in the middle of the process the phone got stocked and said to connect to iTunes and so i did it a

Hi,
I had an update massage for a wile on my phone and yesterday I decided to do the update and so I downloaded the soft w. and started to install but in the middle of the process the phone got stocked and said to connect to iTunes and so i did it and again the process gets interrupted first saying "the software on Iphone needs to be restored to factory settings or update" and so i do it..then it comes the message the an error -39 and I can not do it and it says that I need to restore..and so I do it..but its a circle and it never ends..and I have no phone since yesterday.. all my contacts, my work..
Can any one help please?

Hi
A little information will be of a great help, witch iPhone did you upgrade, memory , and version of software ( iOS 8.x.x )?
Try restarting you iPhone and make sure you have a god internet connection , get as close to your wifi router (1-3 meter / 2-9 feet ) as possible. Don't use restore to factory settings before you tried other options . And most imported du you have an iCloud backup.
//Sorenc

I have a new computer with Windows 7 professional, Office 2007, Adobe XI. I have just created a word document and tried save it as a PDF but the PDF option doesn't appear in the drop down menu. Any ideas please? Thank you.

I have a new computer with Windows 7 professional, Office 2007, Adobe XI. I have just created a word document and tried save it as a PDF but the PDF option doesn't appear in the drop down menu. Any ideas please? Thank you.

What is "Adobe XI" - Reader, or Acrobat?
But either way, 'Save as Adobe PDF' is a Word function, independent of what Adobe software you have installed.

I have Creative Cloud installed and Photoshop installed, but I can not open the program itself. No idea why, everything is up to date and i was using it just fine yesterday.

I have Creative Cloud installed and Photoshop installed, but I can not open the program itself. No idea why, everything is up to date and I was using it just fine yesterday.
2015-02-24_1129 - DavidIpromote's library

Try resetting Photoshop Preferences. Use your Photoshop start icon to launch Photoshop and immediately press and hole Shift+Ctrl|CMD+Alt|Option keys Photoshop should Prompt you with Do you want your Preferences deleted. Reply yes. Photoshop should then delete your user ID preferences and then create a default set of preferences for your ID and start successfully.

FCP installed, but no MPEG2 option

Similar Messages

Maybe you are looking for