FCP keeps asking to re-render audio

I have a file - original is :
mpeg 2 muxed
1280x720
fps 25
- i used mpegstreamclip to convert to dv stream
now it's dv - stereo 44.1
after import to FCP - it asks to render audio - so I do It - then if I move the stream to new seq. it asks again?
the dv plays fine w sound in QT - why does it keep asking to re-render audio?

Thank you both.
I did check: convert to 48k so that worked well
- so my result file was DV stereo 48k. When I imported to FCP - it played fine in the viewer window - but when I dragged to the timeline it still needed to re render the audio. I looked in the FCP audio folder and saw that the format was changed to 32 bit float - little endian.
I looked in timeline setting and didn't see any special audio settings regarding this....
Q: Is there some other settings I can do so it doesn't need to re render in the timeline?

Similar Messages

LP 9.1.7 keeps asking for "airplay" audio device

I've seen posts regarding this issue that are 2 years old. Any updates? This is most annoying:
Logic 9.1.7 keeps "scanning your system for audio devices" and asks if I want to use "Airplay" which I do not. I cannot set a *default* interface to my MOTU in the Audio Preferences for i/o device. This started happening when we got an AppleTV. (Airplay mirroring is OFF)
I can simply turn off wifi, but why should I have to? Why does LP keep "scanning" for audio devices? That makes no sense. Can't it just be happy with the one I paid for and has been connected for 2 years?
thanks
OS 10.8.5
Logic Pro 9.1.7
MOTU interface

If you use AirServer, AirParrot or similar software, update to the latest version....
or..
See a thread I posted on LPH about this issue and one fix I found worked for a lot of people...
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=87333
Note: Mavericks seemed to finally fix this issue for everyone....

FCP can it render audio from Snapz Pro X 2.0?

Hi all,
I can't get FCP to render audio when I make a Quicktime movie of a Snapz Pro X 2.0 screen capture. Anyone have a solution? I have varied the Snapz Pro settings but still no success.
RWCPete

What did you export the audio as?
Shane

Why does FCP keeping mixing down audio

I'm working on a school play that we shot with 2 cameras. I edited it with the multiclip feature.
Only problem is when I'm trying to lay down the final sequence, it won't let me lay down 4 tracks of audio.
when creating the muticlip I added the other 2 tracks of audio from the other camera--so there are 4 tracks displayed.
Now when i load them in the Viewer and try to overwrite in a new sequence in only give me 2 tracks of audio-I need all 4 tracks to do the audio mix.
Why won't FCP let me lay down the audio, I've made sure the tracks are connected. I'm an avid editor learning FCP as i go.
I checked the archives but could not find anything useful.
This would seem like a rather easy task.

did a 2 camera shoot for a play. There is audio on both channels of each camera for a total of 4 channels of audio.
I made my multiclips by syncing the audio from both cameras and creating inpoints.
Than i layed those multiclips into a seq. so I can edit it.
When i did this, you can only lay down audio from one camera into the muliclip sequence. So I added the other 2 channels of audio from the multiclip on A3 and A4.
So after the edit, I know have all my cuts in the video timeline and 4 audio tracks in the timeline.
I have 4 sequences like this b/c we had tape changes during the performance.
I now want to take those 4 sequences and create one final sequence(called Master) that has the edited multiclips with all 4 channels of audio but when I load the act 1 sequence in the viewer and try to lay it down in the (master) it only drops down 2 audio tracks...not the 4 that i see in the act 1 sequence.
let me know if i need to take a screen shot to explain better.

FC asks me to render every title...

I'm subtitling a 15-minute doc and I've gone halfway through without any issues. Suddenly, FC just started to ask me to render every new title I'm inserting, I haven't changed anything or added any video/audio track to the timeline. I shouldn't be asked to render every title to view it in real time right? Otherwise my subtitling is going to take much more time.
Any suggestions as why it just started to require rendering?
Thanks
Paula

Paula,
I use the FCP text generator quite often for subtitling. I would recommend setting the RT to Unlimited instead of Safe. For each text generator that is added to the timeline, you will get a render bar. Just keep adding your text until you're ready to play it back, then render. With Unlimited RT (Orange render bar), you should be able to play back the timeline without too many dropped frames.

How do I export when FCP keeps crashing for large QuickTime exports?

Forum,
I have a 108-minute finished Final Cut Pro project. Ultimately, I'd like to burn it on a DVD so that it can be watched by any Joe-Schmoe using an ordinary DVD player. I'll be using DVD Studio Pro to do the burning. And before this, I plan to compress using Apple Compressor.
But...
I can't export this file to QuickTime! FCP keeps CRASHING about halfway through the process. I'm preserving the Current Settings, which, by the way, are XDCAM EX 1080p24 VBR.
I have four internal hard drives used as follows:
D1 OSX and FCP
D2 audio media
D3 visual media
D4 location of FCP files and scratch disk
I also have a MyBook USB2.0 external drive available should this be of use.
Any suggestions for a viable workflow here? Should I be exporting to QuickTime first? Is my configuration doomed? Should I export straight to Compressor?
thanks,
Shanked

Is there a way to do this WITHOUT your suggested software?
Sure, but its very manual and the Corrupt Clip Finder really just automates that for you ... but I get your point about keeping things clean and can't fault that philosophy.
First, you can use the Tools > Render Manager to delete all the sequence's render files and references. Then just play through the entire sequence (in the sequence RT menu you can enable the option to Play Base Layer Only). If the corruption was in one of the render files then you should now be able to play through without issue. If the corruption is in one of the clips then you should discover that FCP will crash or throw up an error when it tries to play though that clip ... keep a note of where this error occurs as thats your corrupt clip. Similarly, after trashing renders you can re-render, keep an eye on the render progress ... the error will be thrown proportionate to the area of the timeline where the corrupt source clip is contained. Additionally, yes, you can use the Reconnect Media function to selectively reconnect your source media to your masterclips, clip by clip ... the one that won't reconnect is going to be the problem child. That's the one you need to recapture/reimport from source.
Hope it helps
Andy

FCP 6 - Exporting Quicktime MOV distorts audio (clipping), plays fine in FC

I've just finished a project and have exported my finished video to a Quicktime file, using the same settings as my original capture (HDV 1080i50). However, when I do so, the audio in the exported file is clipped quite horribly, and makes it hard to make sense of what is going on because of it.
I have several sound files that have been amplified +9dB in the project, and was originally worried about clipping, but they play back absolutely fine in Final Cut, with no distortion at all.
Any ideas on how to remove this clipping on export? If I have to reduce the sound level on my clips, is there a way to do it via batch? I've got heaps of keyframes controlling volume, it would be an absolute pain to do manually.

Keep your audio peaks between -12 and -6 inside FCP. Never, ever clip the audio. Use of some compression and/or limiting - if done correctly - will help you control your levels: Putting a lid on loud stuff and bringing up the level of low stuff. And does a better job of level control than manually riding-gain with a fader or inserting audio level keyframes.
Compressors will help you.
Search the web for tutorials on how to use 'em and you'll never look back.
John

FCP keeps crashing EXC_BAD_ACCESS (SIGBUS)

Good morning all,
Our FCP keeps crashing. Usually during scrubbing or trimming. But sometimes also out of the blue. First the image kinda jitters and then FCP crashes.
We reinstalled FCP, reinstalled MacOSX, updated all drivers and whatnot.
Still keeps crashing, could it be the new RAM we put in?
We have our footage on a striped RAID. In this case it's XDCam footage, but we had the same with Prores files.
Any help or suggestions would be great.
Here's the crash report, if anyone can make sense out of that:
Process: Final Cut Pro [190]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut
Pro
Identifier: com.apple.FinalCutPro
Version: 7.0.3 (7.0.3)
Build Info: FCPApp-1008261348~8
Code Type: X86 (Native)
Parent Process: launchd [119]
Date/Time: 2011-01-25 23:13:47.792 +0100
OS Version: Mac OS X 10.6.6 (10J567)
Report Version: 6
Interval Since Last Report: 9976 sec
Crashes Since Last Report: 3
Per-App Interval Since Last Report: 3296 sec
Per-App Crashes Since Last Report: 3
Anonymous UUID: 2B62153D-22E8-463F-856A-37C21EDE87B0
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000094
Crashed Thread: 16
Thread 0: Dispatch queue: com.apple.main-thread
0 ...ple.CoreServices.CarbonCore 0x974676bf
FindNextComponentInstance(RegisteredComponentInstance*,
RegisteredComponent*) + 126
1 ...ple.CoreServices.CarbonCore 0x97465af7 OpenAComponent + 560
2 com.apple.QuickTime 0x93dbf6dd
insertPossibleChainsUsingPreDecompress + 4221
3 com.apple.QuickTime 0x93dbcd1d
insertPossibleChainsUsingCodec + 196
4 com.apple.QuickTime 0x93dbcadc insertPossibleChains + 136
5 com.apple.QuickTime 0x93dbac52 FindBestChain + 1537
6 com.apple.QuickTime 0x93db9238 ICMSequenceGetChain + 392
7 com.apple.QuickTime 0x93db2404 DoBandedDecompress + 5677
8 com.apple.QuickTime 0x93db0b05 ICMAction + 961
9 com.apple.QuickTime 0x93daf7ec ICMDeviceLoop + 546
10 com.apple.QuickTime 0x93dae85a
DecompressSequenceBeginPrivate2 + 1967
11 com.apple.QuickTime 0x93e0c28a DecompressSequenceBeginS +
127
12 ...ickTimeComponents.component 0x92edb986 v2m_getNewSeqOrSess + 2722
13 ...ickTimeComponents.component 0x92edc518 v2m_ensureSequenceIsReady +
209
14 ...ickTimeComponents.component 0x92ee0081 QueueAFrame + 400
15 ...ickTimeComponents.component 0x92ee142c v2m_doWhatTheMentorTellsUs +
1243
16 ...ickTimeComponents.component 0x92ee4ccb Video2MoviesTask + 2891
17 ...ple.CoreServices.CarbonCore 0x9747a309 callComponentStorage_44444 +
49
18 ...ple.CoreServices.CarbonCore 0x9746f054
CallComponentFunctionCommonWithStorage(char**, ComponentParameters*, long
(*)(), unsigned long) + 54
19 ...ickTimeComponents.component 0x92ed21a8 Video2ComponentDispatch +
212
20 ...ple.CoreServices.CarbonCore 0x974677c9 CallComponentDispatch + 29
21 com.apple.QuickTime 0x93e0a8da MediaMoviesTask + 61
22 com.apple.QuickTime 0x93e09692 TaskMovie_priv + 4799
23 com.apple.QuickTime 0x93e1c4ec MoviesTask_priv + 101
24 ...alCutPro.Plugins.QTM Reader 0x0d83ac1b
LongGOPChunkWriter::receiveSample(unsigned char const*, long long, unsigned
long, long long, long long, SampleDescription**, unsigned long, unsigned
long, long long, bool) + 22009
25 ...alCutPro.Plugins.QTM Reader 0x0d84b095 PluginMainEntry(long, long,
KGDictInt*, void*) + 7555
26 com.apple.FinalCutPro 0x00245edb pKGGetFileVideo(KGDictInt*,
double, long, unsigned char, KGCanvasRec*, KGRect*, KGDictInt*, KGFileRec*,
unsigned long long, long) + 1615
27 com.apple.FinalCutPro 0x0023f4ea pKGGetItemThumbnail(double,
long, KGCanvasRec*, KGRect*, KGDictInt*, unsigned long long) + 816
28 ...Pro.Plugins.Timeline Editor 0x0d8e6530
TLProcessThumbnails(TimelineViewRecord*) + 2008
29 ...Pro.Plugins.Timeline Editor 0x0d8d8e1c
TLTimeRemapGetChangeType(KGDictInt*, KGItemSpec*, double, KTPartKind, long)
+ 105982
30 com.apple.FinalCutPro 0x00150000
KGTimerInvoke(__EventLoopTimer*, void*) + 212
31 com.apple.CoreFoundation 0x977baadb __CFRunLoopRun + 8059
32 com.apple.CoreFoundation 0x977b8464 CFRunLoopRunSpecific + 452
33 com.apple.CoreFoundation 0x977b8291 CFRunLoopRunInMode + 97
34 com.apple.HIToolbox 0x980f6004 RunCurrentEventLoopInMode +
392
35 com.apple.HIToolbox 0x980f5dbb ReceiveNextEventCommon + 354
36 com.apple.HIToolbox 0x9827e255 ReceiveNextEvent + 83
37 com.apple.FinalCutPro 0x001571cb
HandleMouseDown(OpaqueEventRef*) + 1965
38 com.apple.FinalCutPro 0x00157e4d DoEvent(OpaqueEventRef*,
KGDictInt*) + 729
39 com.apple.FinalCutPro 0x00414501
Events(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 67
40 com.apple.HIToolbox 0x980c8ecf
DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
+ 1567
41 com.apple.HIToolbox 0x980c8196
SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*,
HandlerCallRec*) + 411
42 com.apple.HIToolbox 0x980eaa07 SendEventToEventTarget + 52
43 com.apple.HIToolbox 0x980fc543
ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*,
void*) + 1257
44 com.apple.HIToolbox 0x980c9320
DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
+ 2672
45 com.apple.HIToolbox 0x980c8196
SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*,
HandlerCallRec*) + 411
46 com.apple.HIToolbox 0x980eaa07 SendEventToEventTarget + 52
47 com.apple.HIToolbox 0x98273d2b ToolboxEventDispatcher + 86
48 com.apple.HIToolbox 0x98273e63 RunApplicationEventLoop +
243
49 com.apple.FinalCutPro 0x001539d1 KGMainEvent(void*) + 51
50 com.apple.FinalCutPro 0x002c1278 main + 54
51 com.apple.FinalCutPro 0x00002d5b _start + 209
52 com.apple.FinalCutPro 0x00002c89 start + 41

Oooo! I can! Because I have CRASH ANALYZER from www.digitalrebellion.com.
"QuickTime"
This crash was caused by QuickTime.
Possible causes include corrupt media, corrupt render files, an unsupported or unstable codec, an image resolution that is too large (this is particularly a problem with Motion as image sizes are limited by the maximum texture size of your graphics card), or a version of QuickTime that is incompatible with your version of Final Cut Studio.
If the crash is happening at startup and you have not set any projects to launch when the application starts, it is likely that you have a mismatched version of QuickTime.
Suggested Actions
Use the Render Manager in Final Cut Pro to trash your render files.
Use the Corrupt Clip Finder to locate the problematic clip and then recapture or attempt to repair it.
If the issue is related to a codec, upgrade the codec if an upgrade is available or consider transcoding your footage to an editing-friendly codec such as ProRes.
If you are using CMYK images, convert them to RGB.
Upgrade Final Cut Pro to bring it in line with your version of QuickTime.
Relevant Line
2 com.apple.QuickTime 0x93dbf6dd
Shane

HT4623 MY i phone 5 wont let me download apps etc it just keeps asking for my apple id password?

Juat got my i phone 5 today and have opened an apple accout but it wont let me download apps etc just keeps asking for a password over and over again???

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

I can't understand apple teminology - what is the difference between a keychain and a password - why does my mac keep asking me to type in the keychain - I don't know what it is or when it was created!!!

I can;t understand the apple terminology - what is a keychain and how is it different to password? When I set a new password it keeps asking me for the login keychain. None of my passwords work for it and I don't know when it would have been created.

A "keychain" is a secure database in which passwords are stored in an encrypted format to prevent unauthorized discovery of your passwords. Think of it like a bank safe deposit box in which you can safely store your passwords.
If you have a problem with your keychain then perhaps you have not changed the passwords correctly or need to repair your keychain. You might try:
Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start".

I tried to buy an app and itunes keeps asking for a security code. What is a security code? I do not have one. I have a password.

I tried to buy an app and itunes keeps asking for a security code. What is a security code? I only have a password! And ID

Are you using a credit card?
http://store.apple.com/au/help/payments#creditus
Security codes
The credit card security code is a unique three or four digit number printed on the front (American Express) or back (Visa/MasterCard) of your card.

Urgent help required - linked subreport keeps asking for parameter value

Greetings,
I have developed a report in the Crystal Reports bundled with Visual Studio 2005. The data is obtained from a stored procedure. One of the fields in the result set is named "Id".
I have embedded a subreport in the details row of the main report. The subreport also gets its information from a stored procedure. This stored procedure has one parameter named "OpportunityId". This field is linked to the field named "Id" above. the subreport has been set to supress blank subreports.
In the development environment and running the executable of the application on the development machine the report works perfectly. The subreport displays as it should and all is well.
When I deploy the report onto user machines where they have the crystal runtime installed, the report keeps asking for a parameter value for the subreport.
I cannot get this to stop happening.
This report is urgently required. PLEASE could someone help me out here.
I am at my wits end.
I have attached a zipe file containing the following:
- the two stored procedure
- the rpt file
- a sample report
- a screen showing the report having just been generated
Thanks in advance,
Robert Lancaster

Hi Robert,I see your report template and stored procedures. All seems to be ok. The most important is to assign the report parameters for all linked subreports (only one in your case). Try this (in C#, in VB.NET the code are very similary): ReportDocument report = new ReportDocument(@"TopFortyReport.rpt");AssignParameters(report, paramCollection);// and now assign parameters to all linked subreports foreach( CrystalDecisions.CrystalReports.Engine.Section section in report.ReportDefinition.Sections){ foreach (CrystalDecisions.CrystalReports.Engine.ReportObject reportObject in section.ReportObjects) { if (reportObject.Kind == ReportObjectKind.SubreportObject) { SubreportObject subReport = (SubreportObject)reportObject; ReportDocument subDocument = subReport.OpenSubreport(subReport.SubreportName); AssignParameters(subDocument, paramsCollection); }} void AssignParameters(ReportDocument report, object[] paramsCollection){ int nParams = paramsCollection.Length; for (int iParamIndex = 0; iParamIndex < nParams; iParamIndex++) { if (report.DataDefinition.ParameterFields[iParamIndex].IsLinked()) continue; report.SetParameterValue(iParamIndex, paramsCollection[iParamIndex]); }}

I have an apple ID, I'm trying to use this to update and download apps etc. however, whenever I try this, it keeps asking me to use my old ID, which is attached to an email that no longer exists! I can't download or update anything! Help!

I have an apple ID, I'm trying to use this to update and download apps etc. however, whenever I try this, it keeps asking me to use my old ID, which is attached to an email that no longer exists! I can't download or update anything! Help!

You can log out of the currently logged in account by taping on the id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and you can then log back in.
If you updated your existing account with a new email address then that shoud 'refresh' it on it
If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can redownload its content and download updates to its apps. You should be able to update an account's email address via this page : http://appleid.apple.com

I reset my apple ID password here on the website, but my computer isn't recognizing my new password. what should I do? I just need to update my adobe flash player but it keeps asking me for my password but won't take my new password I just updated.

Model Name: iMac
Model Identifier: iMac12,1
Processor Name: Intel Core i5
I reset my apple ID password here on the website, but my computer isn't recognizing my new password. what should I do? I just need to update my adobe flash player but it keeps asking me for my password but won't take my new password I just updated.

"If you've forgotten the Apple ID password how did you log in to make the last post?"
Exactly! The password I used to log on here and write my post I figured was the same Apple ID password I would use to reset my computer login password. But my computer isn't recognizing it as the correct password so it wont let me update my login password. I have 2 user accounts on my computer.
As far as the link you provided, I already looked to that for help earlier. It states:
Choose Apple menu > System Preferences, click Users & Groups, click the lock to unlock it, then provide an administrator name and password. Select a user, then click Reset Password.
I did these steps, but I don't remember my admin password. The question is: How do I reset my admin password so I can reset my log in password.
Is my admin password the same password I use to log onto this website to post questions? If so, like I said previously, I already reset that password and my computer isnt recognizing it.

ITunes wont let me download music it keeps asking me for a password

i go on iTunes to download music and its not letting me, i put the password in for more than 20 times and it keeps asking me the same thing put your apple id password in what should i do?

I thought it was just me because I'm new at this. I hope someone answers this question quickly. Seems like it should be a simple fix. Very irritating.

FCP keeps asking to re-render audio

Similar Messages

Maybe you are looking for