FCP loads too many projects in Browser at Start up...

Ok, I'm annoyed by how many darn projects load into the browser, with their bins and files and tabs...in addition to all the sequence tabs that scatter all over my timeline at FCP when i start the program up. How do i stop the insanity? I can imagine the last project I opened would be handy to have at start up, but not several! Thanks guys.
-Mike

1. Switch off the setting to open recent projects.
2. Dont leave all projects opened when you quit FCP. Close all but the one you want to leave open for the next time you launch FCP.
3. When you launch FCP instead of opening it up, go to the place where you keep your project files and open the one you want to work with. No others will open.

Similar Messages

  • Does loading too many classes into jvm slow down performance?

    hi all,
    does loading too many classes into jvm will slow down performance. Our application is CPU bound, if we use any framework we need to load all the classes related to that framework in JVM. Does this have any effect on the performance of the JVM.
    thanks and regards,
    akmal

    does loading many classes into jvm slow down performance.It will increase the time it takes for the JVM to load your application.
    Our application is CPU boundThe time it takes the JVM to load your application is not likely to be an issue for you then.

  • Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

    aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

    “Hi Kirby, thanks a lot for your answer.
    I got one answer, from DMoore, saying:
    “Try Safe boot and then restart with only Aperture open.  Still doent work write back with more details like Ram, HD capacity/free space.  Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
    Safe boot   http://support.apple.com/kb/HT1564
    Starting up into Safe Mode does several things:
    1  It forces a directory check of the startup volume.
    2  It loads only required kernel extensions (some of the items in /System/Library/Extensions).
    3  In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
    4  It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
    5  It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
    6  It disables all startup items and login items (Mac OS X v10.4 or later).
    7  Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
    As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
    But I understand your questions, so I’ll try to answer them;
    "loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or  I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
    I can see images in the Browser, so it only happens in the Viewer(s).
    I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers  – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
    Did Aperture work before?
    Yes it worked ok for a while, but I only purchased it on 24th May.
    If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
    So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
    But I have not changed the default Preview settings in Aperture Preferences.
    My macbookpro details:
    2.7 Ghz Intel Core i7
    Memory: 8 Gb 1333 MHz DDR3
    Hard Drive capacity 499.25 GB
    Available 387.36 GB
    I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
    I hope this helps you to understand more.
    Thank you for trying to help me.
    Tony

  • Verbose boot loading too many drivers

    I put a clean install of Mavericks on a couple weeks ago.  I always boot verbose and watch the output so I can note any changes and follow up on them.  A few days ago a very obvious change occurred...  when it gets to the loading drivers section very early on it went from displaying just a couple of lines of dots (.....) to displaying a couple of dozen.  I like to run a very clean system with only the things I am actively using loading up.  I also have a very simple system and have no reason for this change.  How do I find out what's going on?
    thanks

    markbabc wrote:Also i heard about people loading modules they use into their kernel to improve performance and i was wondering how to do this, i saw nothing in the wiki and couldnt find anything in the forums.
    Ah, I glanced over that, it's called make localyesconfig.  See this.
    1.8. Easy local kernel configuration
    Most people uses the kernel shipped by distros - and that's good. But some people like to compile their own kernels from kernel.org, or maybe they like following the Linux development and want to try it. Configuring your own kernel, however, has become a very difficult and tedious task - there're too many options, and some times userspace software will stop working if you don't enable some key option. You can use a standard distro .config file, but it takes too much time to compile all the options it enables.
    To make the process of configuration easier, a new build target has been added: make localmodconfig. It runs "lsmod" to find all the modules loaded on the current running system. It will read all the Makefiles to map which CONFIG enables a module. It will read the Kconfig files to find the dependencies and selects that may be needed to support a CONFIG. Finally, it reads the .config file and removes any module "=m" that is not needed to enable the currently loaded modules. With this tool, you can strip a distro .config of all the unuseful drivers that are not needed in our machine, and it will take much less time to build the kernel. There's an additional "make localyesconfig" target, in case you don't want to use modules and/or initrds.
    ...it's unclear to me how hard-coding the modules into the kernel will boost performance though.
    Last edited by graysky (2010-12-25 14:00:59)

  • Does having too many project effect FCPX performance?

    I have 100 - 150 projects
    Selecting a project takes about 5 - 10 seconds
    Dragging into folder takes a similar time
    Does having that number of projects effect the performance?
    When loading up, it reads all project names and checks links (I think)
    So I'm guessing there HAS to be some sort of performance hit?
    Thanks
    Omar

    james, thanks for the reply
    currently i'm working off the hard drive on my macbook pro
    the 'events' what are these? are they simply pointers to where the media is stored?
    similar with 'projects' - assuming there are a few more parameters stored for specific settings?
    apart from rendering files, these files all should be light weight?
    i read that link u gave. i'm now going to move events and project folders as mentioned
    Event Manager X: is it worth getting?
    i read the reviews. it doesnt say whether or not u can specify where the files are hidden to - lets say you want to keep on the current drive - or maybe move to an external drive
    some reviews have complained about the lack of response from buyers - doesnt sound too good
    EDIT: i've moved events and projects. i closed fcpx and then started again. the event and project names are still there 
    what am i doing wrong?
    EDIT: lets say i move events called abc. let's say i have a projects folder called xyz which used media in abc. i move xyz this as well
    12 months, i need abc and xyz - but i've forgetton how they are connected and i have 100's of project files and events i have taken offline
    what happens then?
    thanks

  • ABAP - CUA : Initial load : too many records in the CUA?

    We are running :
    SP03 for IDENT. CENTER DESIGNTIME 7.1 Patch 0
    SP03 for IDENTITY CENTER RUNTIME 7.1 Patch 1
    SP03 for NW IDM IC UIS 7.00 Patch 1
    We have connected our customer's CUA system to IdM : we created an Identity Store called 'SAP_Master', created the CUA repository, defined the required attributes as defined in the guide 'IDM 7.1 - IdM For SAP Systems - Configuration 7-3.pdf', created the jobs based upon the templates etc. The dispatcher used has 'run provisioning jobs' disabled.
    On our sandbox server, when we connect to our sandbox CUA system (CUA_YS5_200), everything is ok, the 'AS ABAP - Initial load' job with only 'ReadABAPRoles' enabled, runs fine.
    On our QA system, when we connect to our 'production' CUA system (CUA_YP0_400), the 'AS ABAP - Initial load' job with
    only 'ReadABAPRoles' enabled, finished with message 'could not start job, rescheduling'. Since there is a huge number of records (we looked it up in the system : 311.679 records), we decided to switch on parameter 'bootstrap job'. Now the result is that it takes forever, after half a day the job is still running. In the database, table 'sapCUA_YP0_400role' is still completely empty (no records). Therefore, it seemed interesting to connect our QA IdM system to our development CUA system (CUA_YS5_200). After a while, the exact same job has finished and table 'sapCUA_YS5_200role' contains 18.580 records.
    After some additional testing, we might have discoved the cause of the issue could be that the number of records in our CUA is too big.
    In the java code of the fromSAP pass there are 2 calls to the SAP system for reading the roles into Idm. The first one reads table USRSYSACT (311.000 records), the second one reads table USRSYSACTT (1.000.000 records). All these records are stored into a java hashmap - we think that 1 million records exceeds the hashmaps capability, although no java error is thrown.
    When we debug the functionmodule RFC_READ_TABLE and change the rowcount to 100.000 then everything works fine. When we set the rowcount to 200.000 the java-code does not generate an error but the job in idm never
    ends...
    When running functionmodule RFC_READ_TABLE in the backend system the 1.000.000 records are processed in less than one minute. So apparently, the issue is related to the processing in the Java code.
    Java Dispatcher heap size is set to 1024.
    Anybody already came accros this issue?
    Thanks & best regards,
    Kevin

    Installing the patch, re- importing the SAP Provisioning framework (I selected 'update') and recreating the jobs didn't yield any result.
    When examining pass 'ReadABAPRoles' of Job 'AS ABAP - Initial Load' -> tab 'source', there are no scripts used .
    After applying the patch we decided anyway to verify the scripts (sap_getRoles, sap_getUserRepositories) in our Identity Center after those of 'Note 1398312 - SAP NW IdM Provisioning Framework for SAP Systems' , and they are different
    File size of SAP Provisioning Framework_Folder.mcc of SP3 Patch 0 and Patch 1 are also exactly the same.
    Opening file SAP Provisioning Framework_Folder.mcc with Wordpad : searched for 'sap_getRoles'  :
    <GLOBALSCRIPT>
    <SCRIPTREVISIONNUMBER/>
    <SCRIPTLASTCHANGE>2009-05-07 08:00:23.54</SCRIPTLASTCHANGE>
    <SCRIPTLANGUAGE>JScript</SCRIPTLANGUAGE>
    <SCRIPTID>30</SCRIPTID>
    <SCRIPTDEFINITION> ... string was too long to copy
    paste ... </SCRIPTDEFINITION>
    <SCRIPTLOCKDATE/>
    <SCRIPTHASH>0940f540423630687449f52159cdb5d9</SCRIPTHASH>
    <SCRIPTDESCRIPTION/>
    <SCRIPTNAME>sap_getRoles</SCRIPTNAME>
    <SCRIPTLOCKSTATE>0</SCRIPTLOCKSTATE>
    -> Script last change 2009-05-07 08:00:23.54 -> that's no update !
    So I assume the updates mentioned in Note 1398312 aren't included in SP3 Patch 1. Manually replaced the current scripts with those of the note and re- tested : no luck. Same issue.
    Thanks again for the help,
    Kevin

  • Lately I have been getting many too many popups while browsing how to prevent?

    I typically visit newspaper sites, Yahoo, TWC and others, I am bombarded with pop-up ads top, bottom and both sides of the screen. Sometimes they block the information. Many do not have "X" in the corners and often they jump to their site if I click by mistake.
    This is a fairly recent issue maybe a month old but seems to be getting worse or my patience is wearing!
    Any insight would be appreciated.

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of (What is? LyricXeeker).
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • HT2478 Too many pictures in screensaver folder - can't change it - help?

    I loaded too many pictures inside a folder for screensaver and now I can't seem to select another folder.  It stops responding when I try to change.  Help?

    abe_house wrote:
    Ok.  Maybe we are not being clear.
    a) the home (user library) optionkey>finder>go>library>screen savers is empty.
    Apparently you do not have any custom savesavers.
    b) the HD>library>screensaver folder is empty (same as above?)
    Not the same.  HD is system (what the system uses to run your comp or system files you have transferred from another computer). 
    Home (user Library) are files that you personally use.
    As for the screensaver folder being empty, that's ok.
    c) the HD>system>library>screensaver folder has lots of saver files in it (althought they all look to correspond with savers that are not slideshows, e.g., Flurry)
    I've never moved any of these files and can't think how I would have ever done this accidentally.  Maybe this is too technical.
    You seem to be ok as far as your screensaver mappings.
    Can you give me a file to search for - maybe I can locate e.g., the Ken Burns photo slideshow screen saver.
    Ken Burns slideshow is part of iPhoto.  However, to actually find it takes a lot of legwork. 
    Machintosh HD>System>Library>PrivateFrameworks>Slideshows.framework>Versions>A>Resources>C ontent
    >Styles>KenBurnes.mrbStyle.  Click on the folder>Contents>Resources>Preview.mov is the Ken Burns photo slideshow!
    Although I am not new to Macs, I am new to Mountain Lion. I depend on a book called, OS X Mountain Lion: The Missing Manual - David Pogue .  This book is very easy reading, non technical & non geeky.  I strongly recommend this book as it takes you step-by-step through Mountain Lion. 
    Since you are new to Macs, take full advantage of your warranty & purchase AppleCare for that piece of mind.  Out of warranty resources:  There is Apple’s own Knowledge Base Articles:  http://support.apple.com/kb/index?page=search 
    The OS Help Menu.
    Apple’s troubleshooting website:  Mac 101

  • Why do I get the message too many redirects

    Aloha:
    Every time I try to use Safari for a search, I get the error messge too many redirects.  This just started and changing my DNSid not help.  HELP!!
    Thanks
    Dan Page
    Hawaii

    Your ISP may be redirecting your browser.
    Use Open DNS. It's free and includes anti phishing filters.
    Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
    Enter these numbers exactly as you see them here.
    Click +
    208.67.222.222
    Click +
    208.67.220.220
    Then click OK.
    More about OpenDNS here.
    Topic : Manually provided DNS server addresses are higher priority than DHCP's

  • Is it possible to have too many keyframes in one project in Premiere?

    Hi all,
    I'm using Premiere 6 on a Windows 7 ULT machine.
    Is it possible to have too many keyframes in one project in Premiere?
    I'm getting app crashes when I try to re-open a certain project in Premiere 6 and it seems that if that file has over 93 keyframes, then it will not re-open.  But I can re-open that exact same project file with 93 keyframes in it, no problem.
    But if I go any further and create any more keyframes than 93 in a new re-saved version of the exact same file, then that file will not re-open and I get an app crash... you can see screenshots of the two Windows app crash info panels below that I'm getting from three different bad Premiere project files that I've created so far.
    I've tested and tested what is going on here and this seems to be what is causing the bad files.  I've re-created the scenario and re-created files with over 93 keyframes from the same base project file that will still open... as soon as I get more than 93 keyframes in this file, then that newly saved file will not re-open after I close and try to re-open it.
    This is 75 keyframes in one still image clip, 14 keyframes in another still image clip and 2 keyframes each in two other still image clips in a single project file... that is the limit... if I create any more keyframes in the clip that has 75 keyframes, the new file will save and render, but it won't re-open once it has been closed.
    The two slightly different app crash info panels show, in the first one below,
    "Fault Module Name: StackHash_e98d"
    ... and the second one shows,
    "Fault Module Name: PREMINFO.dll"
    ... both messages with a little more different info in each one.  I get either of the two error info panels when trying to re-open all three bad files that I've created with over 93 keyframes in them.  That is, two of the files alternate between giveing "StackHash_e98d" and "PREMINFO.dll" when trying to open them and one of them always shows the "Fault Module Name: PREMINFO.dll" error.
    So even the error messages are inconsistent with two of the bad files.
    I've searched the internet for this error in association with Premiere and I've also searched on this forum and found nothing.  Can anyone shed any light on this?
    Thanks,
    digi

    Bill,
    Even though I figured out a work around, I was still interested to know if these file opening crashes are related to Virtual Memory.
    So on the topic of Virtual Memory... a few months ago I was troubleshooting a different problem in Premeire and I found this information...
    "To improve performance in Premiere Pro, adjust the size of the paging file to a maximum of twice the amount of installed RAM."
    Previous to that time three months ago or so, I had my Virtual Memory settings at the default automatic setting, but I tried setting my VM to twice the amount of installed RAM, and I've had it set that way ever since, just to make sure I'm optimizing the VM performance for Premiere and other apps.
    But that isn't making any difference in this case.  Today I also found information in a search that says to troubleshoot StackHash crashes, one should turn off "DEP" in the system settings for the application with the crash problem... according to the paragraph below, from the second post down by Chris on this tdistler.com page... http://tdistler.com/2009/04/10/stackhash-and-application-crashes-on-windows
    Even though this was written in 2009 with Windows Vista in mind, many things for Vista work in Windows 7... it says,
    "Here’s how 99 percent of Vista users can fix a StackHash failure. I’ll walk you through it step by step:
    Method A:
    1. Open your Start menu and click Control Panel
    2. Browse to “System Maintenance” then “System”
    3. In the left panel, select “Advanced System Settings” from the available links
    4. You should now see the System Properties Window, which will have three sections. The top section is labeled “Performance” and has a “Settings” button. Click this button.
    5. Select the “Data Execution Prevention” tab.
    6. Select the option which reads “Turn on DEP for all programs and services except those I select”
    7. Use the “Browse” button to locate the executable file for the application you were trying to start when you received the StackHash error, and click Open to add it to your exceptions list.
    8. Click Apply or OK to commit your changes."
    But I tried this and none of the three problem files that I encountered would open... I still got the StackHash_e98d or PREMINFO.dll crash errors.
    So anyway, I'm a ways past that in my project now, just continuing with more keyframes over the number of 78 in separate but identical still image clips... that allows me to successfully work with this project with as many keyframes as I need.
    Thanks again,
    digi

  • Iphoto does not load into iDVD- too many photos?

    Recently upgraded to Leopard 10.5.6 and iLife '09. Ever since, iPhoto will not load into iDVD (iphoto 8.0 and iDVD 7.0.3). When trying to open current and new projects in iDVD, the project opens, and plays, but the photos from iPhoto never load, the loading icon just spins on and on. When I open a new document, the same thing happens. Tried trashing preferences in both programs, reinstalling iLife, and reparing permissions. All software updates are current. Still won't work.
    I am starting to wonder if it has to do with the number of photos I have in iPhoto, which is about 4000. The photos loaded with no problem until I upgraded. Could it be that the upgrades in iPhoto just make the files too large, and it's too much to expect that many photos to load? Does anyone know how many photos is too many,— or can you suggest anything I have not tired that might work?

    This is from Mac Help. It is a good idea to create another account to use in troubleshooting situations such as this. After you create the new account, open iDVD from that account. Try creating a small project to see if you are having the same problems. Post back with your results.
    _Adding a new user account to your computer_
    You can create individual user accounts for each person who uses your computer. Each new user has a separate home folder and can adjust his or her own preferences without affecting other users.
    Choose Apple menu > System Preferences and click Accounts.
    If some settings are dimmed, click the lock icon and type an administrator name and password.
    Click Add and type the user's name.
    If you don't want to use the short name generated automatically, type a new short name. (Once the account is created, you won't be able to change the short name.)
    Type the user's password in the Password and Verify boxes.
    Type a hint to help the user remember the password if they have trouble remembering it at login.
    Click Parental Controls and select options to determine what the user can do with the computer.
    If you change your mind while you're creating a new user account, click Delete to cancel.

  • Firefox 4 opens TOO many empty windows on starting the browser!

    Every time I open up Firefox 4 a BUNCH of empty windows load up with my LAST 'remembered' tabs. SO I have ONE window with all my tabs intact.. and then like 13 EMPTY windows and this happens EVERY time I start up firefox. I have tried everything from using the about:config and changing that one browser tab setting to 'true'... I took out the mimeTypes.rdf from the Application Basics section I even tried UNINSTALLING and REINSTALLING firefox.. I'm SO tired of all these empty windows does ANYONE know what could cause this? I also ran a 'malware' check and I have NONE. I have honestly done EVERYTHING to try to fix this... just wondering if anyone ELSE is experiencing this and if anyone else has ANY other advice! I'm about ready to switch to Google Chrome.. I don't want to! So ANY help/advice would be appreciated! Thank you!!
    <i><removed bold formatting - edited by moderator></i>

    Hi cor-el,
    I think I've seen your answer before on OTHER questions like this one that I asked... The '''STRANGEST''' thing is.. yesterday it opened up '''PERFECTLY''' with NO problems.. then TODAY.. when I opened it.. it actually for SOME reason remembered this 'adobe' page I was on that I KNOW I closed and OTHER windows again.. and it just seems like a MESS now any time I reopen.. like... ''EACH time ''will be a SURPRISE as to what I will SEE in the tabs or extra empty windows...
    BEFORE I attempt this... (I didn't WANT to when I saw you post this before) but NOW I think I MAY have NO CHOICE.. but BEFORE I try this...
    Can you ''PLEASE'' tell me what you mean by... 'REDO App Tabs and Tab Groups'?? I don't understand what that means? How DO I do that?? I'm sorry I checked the link under there and I FEEL totally '''confused'''! If you have a 'short cut' way of explaining this I would LOVE to know and '''''appreciate''''' your time and help.. if not, I understand as I'm SURE it's a bit of explaining...
    I just DO NOT understand why this is happening in the FIRST place? HOW did it START and what the HECK did I DO to make this happen? And why is it, that it seems like NOT too many people HAVE this issue?
    Anyways, thanks for your time.. and
    ANYONE ELSE''' if you have annnnnnnnnnnnnny IDEAS please let me know or if anyone has heard '''ANYTHING''' else about this '''ANNOYING''' situation!
    Sincerely,
    '''FRUSTRATED '''Firefox USER (Shivonne) :(

  • Too many real instruments for a new project?

    I keep getting the notification which says "Part of the project was not played - This project has too many real instrument tracks to be played in real-time".
    BUT the problem is that this occurs even when I open a new garageband file (i.e. no tracks!) and I'm only 3 seconds into recording the first track! So garageband is basically not working for me. I've tried uninstalling and reinstalling it to no avail. Just a few months back I was still able to use it comfortably to do edit many different tracks together so I really don't know what the problem is. I don't really know if its a problem with the processor as I barely use the memory on my macbook pro and even when recording CPU usage doesn't go above 20% so I'm really at a loss. Please help!

    Oh apple support asked me to try that out too but it did not work.. In fact for some of the suggestions they gave (eg using a different user, or even locking the track) it only managed to extend the period of recording to about 10 seconds before the problem resurfaced and after that it was back to the same 3 second problem.
    But that is an important clue, Josiah. If you cannot even record properly from a different user account with basic settings, we know that the settings in your user account cannot be causing this - this looks like system wide trouble.
    You could run a hardware check over night, to check your hardware:
    Intel-based Macs: Using Apple Hardware Test
    and if the hardware check does not show any problems, I'd reinstall Mountain Lion.
    See Linc Davis's post on how to reinstall: Re: Garageband doesn't open in Mac Mini mid 2011
    Regards
    Léonie

  • Unable to load the following resource: Error: too many columns- form won't

    Hi ..
    Can you please suggest on the following error, which i am facing the issue while opening data form in Hyperion Planning 11.1.1.4 .
    Unable to load the following resource: Error: too many columns- form won't
    Regards,
    Vasu

    It is something around 256 if I am not mistaken, I dread to think what a form with 700 columns is like to work with.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Iphone 5 I do not go out or do not appear in upgrede AirPlay for ios 7.0.4 safari browser is not smooth and too long kept out the phrase "safari can not search for too many repetitions search"

    iphone 5 I do not go out or do not appear in upgrede AirPlay for ios 7.0.4 safari browser is not smooth and too long kept out the phrase "safari can not search for too many repetitions search"

    AphexTwin wrote:
    - no Apple input?
    Of course not.  Didn't you bother to read the TOU of this forum?  This is a USER TO USER technical support forum.  Apple doesn't post here.

Maybe you are looking for