Fcp looking for non-existent plug ins

i installed some demo audio units plug-ins a while back and didn't like them so i deleted them.
i just had to re-install FCP and now, every time i launch, it looks for each and every one of the audio units. i have to click cancel like forty times to start the program. i've thrown away my prefs, reinstalled the prgram, thrown away all the install receipts, made sure the audio untis are gone etc. I also use Logic Pro as well (that's what the audio units were originally intended for)
thanks
specs: apple g5 dual, tiger os 10.4.3, FCP HD 4.5

look in /Library/Application Support/Final Cut Pro System Support/Plugins/
and ~/Library/Preferences/Final Cut Pro User Data/Plugins

Similar Messages

Non existent plug ins

Just bought a new 24" iMac which came with iMovie 08 which I didn't like, so I deleted it and installed iMovie HD from my original install disks. Now when I start iMovie HD I get a whole string of error messages which say "something is wrong with the plug in xxx" the first one is 3D color rotate, but when I hit enter I get another for a different plug in and so on for a total of about 50 plug ins. Eventually I can use iMovie ok but its a real pain having to hold the enter key for so long every time I start.
Does anyone know how I can stop iMovie trying to access these non existent plug ins?
thanks
Steve B

SPDB wrote:
Josh
personal opinion only, but why would you want to keep iMovie 08?
As a user of both in concert, I can answer from my perspective. First of all I don't have the innate dislike of iMovie '08 that others do and having never used either version before, I found '08 different but not too hard to master. I would be just as happy using only '08 but I can't because I absolutely must have the ability to define dynamic chapter markers in a full-length movie (something that the Garage Band work-around can't do).
To address the question as to why keep the '08 version, there are a few features that I like better. There are transitions and titles that are either new or improved over those in iMHD6 and the ability to use them is nice. Granted it's a pain to edit the movie in '08, export to a .m4v then open in iMHD6 to split it up and add chapter markers, then share with iDVD, but until someone wants to give me back dynamic chapter marking, or the ability to use iM'08 effects in 'HD6 I'm kinda stuck. That said I will use a good feature wherever I find it, there are some very nice effects in <gasp> Windows Movie Maker </gasp> that are not available in iMovie. I have a virtual machine running XP on my iMac and I'm not afraid to use it and import the result.
Sacr1lege.

Looking for Aperture effects plug-ins

I am looking for plug-ins for Aperture that will allow me different effects that I can apply to my photos directly in Aperture

This is something I am using:
http://www.apertureeffects.com/
but also presets will work as you described:
http://www.appleaperturepresets.net/
and
http://www.aperture-presets.com/
Hope it helps!

Looking for better "transitions" plug ins

Hi, I just bought the Photoshop elements and premiere Elements 9 package. Problem is that I am a simple guy who makes a lot of video movies for my work and I just want a very simple "fade in" type transitions to merge my video clips. The ones supplied are to "busy" and are a distraction in my humble opinion. I didn't feel I should have to Up grade or purchase this one simple fade or "cross fade" after spending my $150.00 I did Google free transitions and found the Burgers page that had exactly the transition I was looking for. http://http://www.burgers-transition-site.de/downloads/transitions/transitioncrossfade.htm l
I down loaded it and tried to add it to my existing library of transitions but it couldn't read the codex? How can I get this simple transition without spend more money? Thank you, Greg McCord

The standard disslove or cross fade that comes with PE9 I would thought would achieve what you want.
You can either have it before or after the break line or equally straddling it.
Simply insert a break line and just drag the effect to the break line.
There is another way that you don't need any 'effects' but gives you complete control of the transition.
When you want the audio to fade differently to the video I put a break in the video and drag the after part up to the second video track and drag it a little earlier by the length of the fade or disslove.
Then right clicking on the clip I select fade in and out on the top track and modify the yellow lines in the tracks to get the right timing.
Example. You want to remove a complete sentence in an interview. You insert a dots in the lower audio yellow line and quickly fade out the audio before the transition starts to remove the first word of the unwanted sentence but leave a bit of video. Then dissolve or wipe to the next sentence to signify that you have deleted something rather than have a jump cut.
If you look at some of my finished timelines it looks like a castle with every scene alternating on tracks 1 & 2.

X61: Bios looks for non-existing CDROM drive?

Hi,
I recently observe a problem with my X61. After the machine is power on, it stops (with a blank screen) for about half a minute before starting to boot Vista. I also notice that if I connect a USB CDROM drive to the machine, then it will not stop during the startup process. I think the problem is that the Bios is looking for a CDROM drive which is not there. Since this problem only happen recently, I suspect that it is due to a recent Bios update. I down-graded the bios from v2.20 to v2.19 but the problem still exists. Could anyone let me know which bios version should I downgrade to? Thanks.
Best Regards,
Daniel

Did you check the boot order in BIOS first? By default , the optical drive should be listed, then the HDD. Sometimes depending on your BIOS seup, you'll see one of of the USB devices listed first. If you power on the unit with a USB CDROM already attached to the unit while turning it on, it's possible the BIOS will detect it and try booting from it.
Enter the BIOS at boot by tapping F1
Then Go to "Startup" , then "Boot"
Remember that you can also exclude any item you want BIOS boot order (normally by pressing "X") Use F5 and F6 to arrow up and down the Boot order.
You can also press F9 to try loading the BIOS defaults.
Let me know if this helps.
Cheers,
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Can't install 7.7. it's looking for non-existant drive G:

Everytime i try to install i get an error message cannot find drive G:
I only have up to an F drive. Have tried plugging camera and iphone to usb ports to create a "dummy drive G" but no good. Pleeeease help! i really need the new upgrade for my iphone and it requires itunes 7.7!!

I've been fighting the same battle the past 2 days, but when I followed these numbered directions above I thought it would work. Wrong, it still said "A later version of iTunes is already installed. Installation of this version cannot continue".
One of the things I noted on the iTunes support page is that VBscript must be installed, and I thought I had it since I have the file: (C:\windows\system32\vbscript.dll).
Anyway, I downloaded VBscript 5.7 from the Microsoft web site, ran the installation, rebooted, and tried reinstalling just the iTunes.msi as described in step 5 since I'd already installed the other components. The install worked this time. I was flabbergasted! Trust me on this, I must have spent 10-12 hours trying everything to uninstall old components, clean up files & directories, and remove all possible registry entries manually, and I could not get past the error message saying I already had a newer version. Only after installing VBscript was I able to get iTunes installed and running!
It is extraordinarily frustrating to have to spend so much time and effort to run a simple software install that should have taken 10 minutes. The developers who thought it was a good idea requiring VBscript be installed on the host machine ought to flogged!

AME looking for non-existent disk drives and now disappeared from hard drive.

AME stopped launching for some reason. now its completely left my system. Reinstall of Premiere Pro CS6 family in Creative Cloud App Manager does not help reinstall AME. How do I get AME back and working?
Windows 8, fast computer, all the other Creative Cloud apps working perfectly.
thanks

Have you verified, that it actualyl exists in your Program Files\Adobe Folder. Did you run the Creative Suite Cleaner Tool? Have you flushed the AME/ PPro prefs?
Mylenium

Reader looks for non-existent Disk

When I run Reader (X), on occasion (but most times) it displays a dialog box telling me there is no disk in Drive E: (which is one of my CD drives). The files I'm reading are on a different drive. I have to click Cancel twice to continue work. How can I stop this?

There may be something in your registry that points to that E: drive.
Try if this can find and fix it: http://fixitcenter.support.microsoft.com/Portal/

VI Search Path not working in LV2011 for VI Server Plug-ins with exe

I have found what seems to be a problem with the search path when a LabVIEW 2011 built executable calls a Plug-in VI.
When the plug-in VI has subVI’s from vi.lib on its diagram the executable has to know where to find them. Not all VI’s in vi.lib are part of the run time engine or the dll’s that may get generated as part of the build. The things you have to do to make plug-ins work for an executable are explained in several Developer Zone articles. The article titled “How Can I Change or Set the VI Search Path for LabVIEW Executables” describes the ini file setting viSearchPath. When this is set to the vi.lib directory I have not encountered problems with previous versions up to and including LabVIEW 2010.
I have come across an example in LabVIEW 2011 where it doesn’t work. I have attached an example (I am using LV2011 SP1). It demonstrates the basic plug-in architecture. Everything works in the development environment. But it doesn’t work from a built exe. I haven’t included the actual built exe in the zip file in case that causes a problem downloading it. If you run the build spec from the src directory project file the exe should get generated in the bld directory. The problem appears to occur when certain VIs from the analysis library are in the Plug-in. In the example attached, the Plug-in VI is very simple but I have placed the troublesome SubVI on the diagram. The VI in this example where there is a problem finding it is the Butterworth Filter VI. I have placed it on the diagram in a conditional disable structure so it is easy to enable and disable. When enabled and you run the test Plug-in VI the error 1003 is raised, meaning a subVI cannot be found in the dynamically called VI (for example see this post). Note that a way round this may be to incorporate the Plug-in VI into the built exe but this shouldn't be necessary. It’s not a problem with this specific filter VI, as it occurs for other VIs I try on the diagram. However if you place an FFT VI on the diagram there is no problem. I suspect that one is built into the Run-Time Engine.
I also note I am running Win7 64 bit and 32 bit LabVIEW (note the relevant viSearchPath in the ini file – you may need to change if you are on different version of Windows). If the example is converted to LabVIEW 2010 everything works as expected for the built exe. I tried that on a colleague’s computer running XP and 2010 but I am pretty sure in still also works on Win 7.
Things I am suspicious of are that the analysis VI’s are part of a LabVIEW library (lvlib) and perhaps something has changed there? I understand there is a problem with OOP in LabVIEW 2011. Perhaps it is related to that as that seems to be an issue in 2011 (see this Discussion Forum post). Perhaps it is related to OS version?
I also tried generating a Source Distribution to extract out all the vi.lib VI’s and place them directly in the Plug-in directory. That didn’t help.
Interested in whether anyone else reproduces this behaviour. In any case something is different in 2011.
Attachments:
LV 2011 test Plug-in.zip ‏42 KB

I found some more out about this issue working with my local NI rep here in Australia. Apparently something has changed in the compiler between LabVIEW 2010 and 2011. Using the viSearchPath token in the ini file, as described in various Developer Zone articles, now guarantees that the Plug-in will not work. The only way to make it work appears to be to create a Source Distribution. I noted in my original post that I had already tried this and it would not work. It turns out that having the viSearchPath token in the ini file when using a Source Distribution causes the error 1003 to occur. When the token is taken out of the ini file the Plug-in (containing an analysis VI) with a Source Distribution works - in the simple example I posted.
Well I then found its a bit more complicated than this. It all worked for the simple example I posted. Recall we found the error when there was an analysis VI in the Plug-in VI. In our actual application (which is a large one) that calls Plug-ins - we still got the error 1003. By trial and error I found a workaround. There are certain Build Spec settings for the calling exe that I set and found worked. On the Additional Exclusions page I found that I had to make sure that I left unchecked "Modify Project Library File after removing unused members". I've always had trouble understanding the need for this setting. In the Build Spec Help on that page it notes that the build will take longer. In most builds you remove polymorphic VI instances, remove unused members of Project libraries and also Modify the project library file after removing the instances (this is a sub setting of the previous). This makes the exe smaller in size and a quicker build time. Obviously modifying the project library caused a problem. In the big application exe calling Plug-in, I probably have the same analysis VI on the diagram (I haven't actually checked and also whether it is the same polymorphic instance) and in the simple example I posted I definitely did not have VI in the calling exe example - so there may be some clue there. I should try putting the same analysis VI on the calling exe diagram in the simple example to see what happens but I'm running out of energy on this one :-(
So none of this gives me much confidence and I wish I could get a better explanation from NI regarding this behaviour to be sure I am not going to encounter a different problem for different calling exe and Plug-ins. I was advised that a CAR would be issued. Perhaps this is now expected behaviour for 2011 but it would helpful if some definitive explanation could be given about what has changed from LV2010. And an update of Developer Zone articles on the subject would be helpful.

CS6 New iMac non-recognized plug-ins issue.

I have a brand new iMac and when I started using CS6 (transferred from my time machine back up), it was fine for a few days until inDesign started telling me various plugi-ins were not recognized. I had to uninstall, then re-install and it seemed fine for a few days, then started to give me the same non-recognized plu-ins error messages again. What gives? Any suggestions? Think it could be a Mountain Lion issue not an Adobe issue?

What else did you migrate over? There's no telling what you danaged that way.
That said, can you post screenshots of the error messages? Something might just stand out that would let us help you.
Bob

Suggestions for third party plug-ins

I’m looking into purchasing some third party filters soon. I’m into special events like anniversaries, weddings, High School events like sports seasons, musicals, etc.
What are the third party plug-ins or filters that you would recommend?
Hank Kearns

For what purpose?
In other words, what effects are you trying to make?
I’m slowly learning more about Final Cut Pro and editing. I do not have any specific need right now. Perhaps I should have asked what are the effects that the more experienced users have found useful.
Here is an example of a effect produced by chv that was posted on Ken Stone’s Discussion List. The contributor I believe is the creator of the plug-in.
<http://www.chv-plugins.com/tmp/Ken-3D-Cube-Demo.mov>
Right now I do not have a need for something like that, but it would be nice to have to potential of creating something like this when needed.
Hank

Looking for Organized LR Plug-In Site

I have been looking to add some features to Lightroom. I am
looking for really organized sites that reviews, comments
or sells Lightroom plug-in downloads.
Can you please post some links to sites that you think
may help me?
Many Thanks!

There aren't many. Part of the reason is Adobe has only released a
development kit for export plug-ins. If your looking for something else your
out of luck.
Robert

More Lion issues - Throwing Console errors for non-existent application

Again, with the bad side of Lion.
I was receiving all kinds of console errors in Lion with TweetDeck and Adobe AIR apps so I de-installed these applications and removed them from the system. However, Apple's fantastic Lion Operating System still is complaining about them even though they are not to be found.
In the console I am getting sandbox errors on locations and files that are non-existent. Below is a snapshot of the error messages, and the directory referred to: /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.... and the others DON'T EVEN EXIST!!
How do I keep this from happening? Why does the OS go after this when it's been removed?????
8/20/11SaturdayAugust 5:30:14.113 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
8/20/11SaturdayAugust 5:31:11.000 PM    kernel    nstat_lookup_entry failed: 2
8/20/11SaturdayAugust 5:31:44.239 PM    com.apple.SecurityServer    Session 100071 created
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/.fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:32:01.234 PM    Preview    snapshot of document took: 0.00030899 secs, calling unblockUserInteraction
8/20/11SaturdayAugust 5:32:01.318 PM    Preview    writing of document took: 0.083616 secs, success = YES
8/20/11SaturdayAugust 5:32:42.333 PM    rpcsvchost    sandbox_init: com.apple.msrpc.netlogon.sb succeeded
8/20/11SaturdayAugust 5:32:42.483 PM    sandboxd    ([66316]) smbd(66316) deny job-creation
8/20/11SaturdayAugust 5:32:42.583 PM    rpcsvchost    sandbox_init: com.apple.msrpc.srvsvc.sb succeeded
8/20/11SaturdayAugust 5:32:42.609 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
8/20/11SaturdayAugust 5:32:53.587 PM    sandboxd    ([66320]) rpcsvchost(66320) deny mach-lookup com.apple.distributed_notifications@1v3
8/20/11SaturdayAugust 5:34:53.329 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
8/20/11SaturdayAugust 5:39:32.429 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

Don't know how you de-installed but you didn't fully uninstall them. If you did not have an uninstaller supplied with the applications, then here's what you need to consider in order to fully uninstall:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

Inserting the default value for non existing date

hello,
i am designing a matrix report for payslip for month wise in oracle 6i report builder.
in that i want to display per day working hours of the month.
i m using following query for achieving my goal :
select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,A.STATUS
from tbltimeregister1 a,
     tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
ORDER BY A.PAYCODE,A.DATEOFFICEit is displaying the hours for the date in b/w date ranges exist in master table.
my problem is that if any date of a month is not in master data ,it should display the given date in DD format with 0 hours , A(absent) status, and null shift by default.
pl tell me how to modify my query for getting my desirable result.
Thanking You
Regards
Vishal Agrawal

965354 wrote:
hello,
select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,A.STATUS
from tbltimeregister1 a,
tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
ORDER BY A.PAYCODE,A.DATEOFFICEit is displaying the hours for the date in b/w date ranges exist in master table.
my problem is that if any date of a month is not in master data ,it should display the given date in DD format with 0 hours , A(absent) status, and null shift by default.
pl tell me how to modify my query for getting my desirable result.Your problem isn't exactly clear to me. How do you pass the dates to be compared to the DateOffice column? It will be better to ensure the Master table contain data for each date (with some default values) and you will not have to tweak your sql.
Below is a possible solution:
select *
from
select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,A.STATUS
from tbltimeregister1 a,
     tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
union
select a.paycode,b.empname,c.departmentname,to_char(&date_variable,'DD') dateoffice,null,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,'A'
from tbltimeregister1 a,
     tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
ORDER BY A.PAYCODE,A.DATEOFFICEIf this is not what you are looking for, then
1. Post a script that helps us to create the Tables required in your query
2. Some sample data. That includes the data for master table that has missing dates (4-5 rows should suffice)
3. The expected results from the sample data you posted.
Please do not forget to mention your version:
select * from v$version;

Application hangs for non existing value

Hi,
At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking more cpu time to execute. what could be the reason for this?
when I join the v$session,v$sql to get the currently running query on database, it shows the query which try to execute from the application as active.
why it is hanging in application and why not in DB?
can any one brief me on this regard? why does application hangs for non exsting value?
With Regards
Boo

Hi,
At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking more cpu time to execute. what could be the reason for this?
when I join the v$session,v$sql to get the currently running query on database, it shows the query which try to execute from the application as active.
why it is hanging in application and why not in DB?
can any one brief me on this regard? why does application hangs for non exsting value?
With Regards
Boo

Fcp looking for non-existent plug ins

Similar Messages

Maybe you are looking for