FCP not available during upgrade

It's been an interesting afternoon. It was necessary to replace my PowerPC G4 hard drive this afternoon before I could upgrade to FCS5, due to space limitations - I'm starting with a clean slate. The problem I'm having is that the installation options for FCS5 is marking FCP as 'skip' and has it greyed out. I assume that I don't have to have FCP4 installed to do the upgrade since I returned the original installation CD to Apple as part of the upgrade offer. As such, is there anyone who can offer some insight as to how I can get FCP installed? It would certainly be appreciated!

I let the system bring in all the required updates prior to doing the FCS5 install. I was finally able to get in contact with Apple Tech Support last night and their guess is that since I updated the machine with faster processors, the installation was assuming that I didn't meet minimum requirements. For the record, I'm currently running dual 1.3GHz processors with 640M of RAM. Looking through the documentation, it appears that even if I didn't do the hardware upgrade I would have met the minimum requirements for at least the FCP5 application - Dual 500MHz processors and 512M of RAM. They have advanced my support request on to the next level. I would hate to think that my only options are to buy a new machine or to scrap FCP all together.
I appreciate the response and depending on where my solution comes from, I will post the information back to the forum.
PowerPC G4 Mac OS X (10.4.7)

Similar Messages

SAP LSO - Time integration; Error Participant not available during course

Dear Gurus,
I have requirement to enable employees to book the course irrespective of the Workshedule he is available in. Please let me know how to acheive it.
Thanks and regards
Saravanan K

Hello Saravanan,
You have mentioned participant not available during course
the reason for this may be check any future action was done on the participant or check whether the participant is reserved/booked as a trainer on that day.
Time integration will show impact on attendance only.
thanks
rafi

Iphoto not available after upgrading to Mavericks

I recently upgrades my iMac to Mavericks. I also upgrades my iPhoto to 9.5.1. However when I click on the icon it gives the following caution:
"The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library."
I have tried the Option key while opening iPhoto, but get the same caution. I have tried opening from the iPhoto library disk image and get the same message. I have gone to Disk Utility and clicked on verify disk and it said all was OK. The button for Verify disc permissions was grayed out and not available.
What else can i do to get iPhoto to work for me?
Thanks....

MAJOR error in over filling your HD and keeping your iPhoto library in a Boot Camp partition. Get yourself an EHD and move large libraries such as your photos, music and movies to it. This is extremely simply to do, simply get an EHD, format it for the Mac (Mac OS Extended (Journaled)) and then drag and dop the libraries to the new EHD. Then to launch each app for the first time after moving the library double click it on the EHD and the app will "remember" where the library is located.

Disck Space not enough during upgrade CUCM 9.1(2)SU1 to 9.1(2)SU2a

Hi,
I face an issues during upgrade my current CUCM 9.1(2)SU1 to 9.1(2)SU2a, it show with this error message "There is not enough disk space in the common partition to perform the upgrade, for steps to resolve this condition please refer to CUCM 9.1(1) release notes or view defect CSCuc63312 in bug toolkit on Cisco.com". I had check the bug id and got 2 way to do it:-
1. reduce the amount of traces on the system, but I not ready want to do this
2. install a COP file name: ciscocm.free_common_space_v1.0.cop.sgn
If I select option 2, will it have any risk? Is it mean 9.1(2) - inactive version will be clear out from disk space or it will clear out 2 version - active and inactive version from disk space?
I need have some advice on this before I perform.
Thanks.

Hi,
As per the following link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/9_1_1/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91/CUCM_BK_R6F8DBD4_00_release-notes-for-cucm-91_chapter_011.html
You will not be able to switch to the previous version after the COP file is installed. For example, if you are upgrading from Cisco Unified Communications Manager 9.0(1) to Cisco Unified Communications Manager 9.1(1) and the previous version is Cisco Unified Communications Manager 8.6, the COP file clears the space by removing the 8.6 version data that resides in the common partition. So after you apply the COP file, you will not be able to switch to the 8.6 version."
Additionally, regarding the first option, if you do not want to reduce the tracing levels you can still delete some old traces using RTMT which gives you an option of deleting the traces from the server as well as transferring / downloading them to your pc simultaneously by checking the 'delete from server' option on last page of log file collection option.
HTH
Manish

Essentials Connector: The server is not available after upgrade from Windows 8 Pro to Windows 8.1. Pro

Hi all
As many others I am facing also connection problems with Windows Server 2012 Essentials R2 and a windows client pc.
The client pc in question, with windows 8 pro, has been successfully joined through the essentials connector to the domain.
All things went good: media streaming, shared folders, a successfull backup has been started through the essentials launchpad, the client appeared as online in the devices tab of the essentials dashboard.
Then I upgraded the pc to windows 8.1 pro.
Now the client can't connect to the server. Following issues appear:
The client pc is showed as offline the the dashboard when it is online.
Backups (from launchpad or server) aren't possible -> no connection to the windows server essentials adminitration service.
Dashboard not available from launchpad
The message "the server is not available" appears, when I try to reconnect the client by the essentials connector.
BUT:
ping to the server's ip address works.
media streaming is also ok
shared folders are still available.
Any ideas what changed with the upgrade to 8.1 Pro? Is the a firewall problem on the client pc?
Many thanks for your help.
PS. If anyone needs a specific log file from the server or the client, please let me know.

Hi Justin
I executed all you instructions, but nothing helped.
I add here the ClientDeploy.log and the ComputerConnector.log
The ClientDeploy stopps after a registry insert error.
The user executing the connector is member of the Administrators Group on the Client pc.
I started the connector even with "Run as Administrator" but nothing helped.
Any ideas why this registry insert failes?
Thanks for you help and best regards
Hans
[5692] 140604.211748.1774: ClientSetup: Start of ClientDeploy
[5692] 140604.211748.3181: General: Initializing...C:\WINDOWS\system32\Essentials\ClientDeploy.exe
[5692] 140604.211748.3337: ClientSetup: Create client deployment registry subkey if necessary
[5692] 140604.211748.3493: ClientSetup: The initial launching way: -LaunchedFrom:installer
[5692] 140604.211748.3493: ClientSetup: The initial state is set
[5692] 140604.211748.3493: ClientSetup: The initial serverName: 192.168.3.21
[5692] 140604.211748.3493: ClientSetup: Loading Wizard Data
[5692] 140604.211748.3649: ClientSetup: Saving Wizard Data
[5692] 140604.211748.3649: ClientSetup: Current DeploymentStatus=Start
[5692] 140604.211748.7400: ClientSetup: Showing the Client Deployment Wizard
[5692] 140604.211748.8493: ClientSetup: Machine name:PCFA, length:4
[5692] 140604.211748.8650: ClientSetup: The input server name is 192.168.3.21
[2156] 140604.211748.8806: ClientSetup: Entering ConnectorWizardForm.RunTasks
[2156] 140604.211748.8806: ClientSetup: Running Task with Id=ClientDeploy.PreConfiguration
[5692] 140604.211748.8962: ClientSetup: InitWizard, The currrent stage is ConnectingToServer
[5692] 140604.211748.8962: ClientSetup: Set the Deployment Sync Event
[2156] 140604.211748.8962: ClientSetup: The configuration cab will be downloaded from 192.168.3.21
[2156] 140604.211748.9118: ClientSetup: Download file Setup.cab from server
[2156] 140604.211748.9275: ClientSetup: Making web request:
https://192.168.3.21//connect/default.aspx?Get=Setup.cab&LanguageId=1031&64bit=1
[2156] 140604.211748.9743: ClientSetup: Failed to download Setup.cab from server: System.Net.WebException: Die zugrunde liegende Verbindung wurde geschlossen: Für den geschützten SSL/TLS-Kanal konnte keine Vertrauensstellung hergestellt werden.. ---> System.Security.Authentication.AuthenticationException:
Das Remotezertifikat ist laut Validierungsverfahren ungültig.
   bei System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   bei System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   bei System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   bei System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   bei System.Net.ConnectStream.WriteHeaders(Boolean async)
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei System.Net.HttpWebRequest.GetResponse()
   bei Microsoft.WindowsServerSolutions.ClientSetup.CSCommon.DownloadFileFromConnectSite(String outputDirectory, Uri serverUrl, String fileName, Int32 languageId, Boolean is64bit)
[2156] 140604.211748.9743: ClientSetup: Cannot get configuration file with https, will try http...
[2156] 140604.211748.9743: ClientSetup: Download file Setup.cab from server
[2156] 140604.211748.9743: ClientSetup: Making web request:
http://192.168.3.21//connect/default.aspx?Get=Setup.cab&LanguageId=1031&64bit=1
[2156] 140604.211749.0369: ClientSetup: Downloaded file C:\WINDOWS\Temp\ClientDeploymentTempFiles\Setup.cab
[2156] 140604.211749.0369: ClientSetup: The configuration cab is downloaded to C:\WINDOWS\Temp\ClientDeploymentTempFiles\Setup.cab
[2156] 140604.211749.1775: ClientSetup: Adding Server Info data in the Product Registry
[2156] 140604.211749.1931: DnsEnvironmentDetector: GetHostAddresses() returned 192.168.3.21, normal environment
[2156] 140604.211749.1931: ClientSetup: Exiting PreConfigTask.Run()
[2156] 140604.211749.1931: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has TaskStatus=Success
[2156] 140604.211749.1931: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has RebootStatus=NoReboot
[2156] 140604.211749.1931: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5792] 140604.211758.0217: ClientSetup: Running InstallRootCert Task at WizardPage DomainUserCred
[5792] 140604.211758.0373: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5792] 140604.211758.0373: ClientSetup: Running Task with Id=ClientDeploy.InstallRootCertTask
[5792] 140604.211758.0373: ClientSetup: Entering InstallRootCertTask.Run
[5792] 140604.211758.0373: ClientSetup: Install root cert to local trusted store
[5792] 140604.211758.0373: ClientSetup: Exiting InstallRootCertTask.Run
[5792] 140604.211758.0373: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has TaskStatus=Success
[5792] 140604.211758.0373: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has RebootStatus=NoReboot
[5792] 140604.211758.0373: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5792] 140604.211758.0373: ClientSetup: Running SetupVPNAndDA Task at WizardPage DomainUserCred
[5792] 140604.211758.0373: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5792] 140604.211758.0373: ClientSetup: Running Task with Id=ClientDeploy.SetupVpnAndDATask
[5792] 140604.211758.0529: ClientSetup: Entering SetupVpnAndDATask.Run
[5792] 140604.211758.0685: ClientSetup: Deploy VPN profile
[5792] 140604.211758.0998: ClientSetup: Exting SetupVpnAndDATask.Run
[5792] 140604.211758.0998: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has TaskStatus=Success
[5792] 140604.211758.0998: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has RebootStatus=NoReboot
[5792] 140604.211758.0998: ClientSetup: Exting ConnectorWizardForm.RunTasks
[5792] 140604.211758.0998: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
[5792] 140604.211758.0998: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5792] 140604.211758.0998: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
[5792] 140604.211758.0998: ClientSetup: Entering ValidateUserTask.Run
[5792] 140604.211758.0998: ClientSetup: Validating User
[5792] 140604.211758.0998: ClientSetup: Call MachineIdentityManager.GetMachineStatus
[5792] 140604.211758.1779: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:NetworkError ErrorCode:-1
BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.Security.SecurityNegotiationException: Es konnte keine Vertrauensstellung für den sicheren SSL/TLS-Kanal
mit Autorität mars01:65500 eingerichtet werden. ---> System.Net.WebException: Die zugrunde liegende Verbindung wurde geschlossen: Für den geschützten SSL/TLS-Kanal konnte keine Vertrauensstellung hergestellt werden.. ---> System.Security.Authentication.AuthenticationException:
Das Remotezertifikat ist laut Validierungsverfahren ungültig.
   bei System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   bei System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   bei System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   bei System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   bei System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   bei System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   bei System.Net.ConnectStream.WriteHeaders(Boolean async)
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei System.Net.HttpWebRequest.GetResponse()
   bei System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
   --- Ende der internen Ausnahmestapelüberwachung ---
Server stack trace:
   bei System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
   bei System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
   bei System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   bei System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   bei System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   bei System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   bei System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   bei System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   bei Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.ICertService.GetMachineStatus(GetMachineStatusRequest request)
   bei Microsoft.WindowsServerSolutions.Devices.Identity.CertWebService.CertServiceClient.GetMachineStatus(String userName, String password, String machineName, MachineStatus& status, Boolean& isAdmin, Int32& maxClientNum, Int32& currentClientNum)
   bei Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
   bei Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.ValidateUserTask.Run(WizData data)
[5792] 140604.211758.1779: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\ipconfig.exe" /all
[2156] 140604.211758.2092: ClientSetup: Standard Ouptput:
[2156] 140604.211758.2092: ClientSetup: Standard Ouptput: Windows-IP-Konfiguration
[2156] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Hostname . . . . . . . . . . . . : PCFA
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Prim„res DNS-Suffix . . . . . . . : mydomain.local
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Knotentyp . . . . . . . . . . . . : Hybrid
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    IP-Routing aktiviert . . . . . . : Nein
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    WINS-Proxy aktiviert . . . . . . : Nein
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DNS-Suffixsuchliste . . . . . . . : mydomain.local
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Drahtlos-LAN-Adapter LAN-Verbindung* 11:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Medienstatus. . . . . . . . . . . : Medium getrennt
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Virtueller Microsoft-Adapter fr direktes WiFi
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : 16-
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Ethernet-Adapter LAN-Verbindung:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Broadcom NetLink (TM)-Gigabit-Ethernet
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : DC-
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    IPv4-Adresse . . . . . . . . . . : 192.168.2.6(Bevorzugt)
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Subnetzmaske . . . . . . . . . . : 255.255.255.0
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Lease erhalten. . . . . . . . . . : Mittwoch, 4. Juni 2014 18:03:36
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Lease l„uft ab. . . . . . . . . . : Freitag, 6. Juni 2014 20:49:17
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Standardgateway . . . . . . . . . : 192.168.2.1
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP-Server . . . . . . . . . . . : 192.168.2.1
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DNS-Server . . . . . . . . . . . : 192.168.3.21
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
192.168.1.52
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    NetBIOS ber TCP/IP . . . . . . . : Aktiviert
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Drahtlos-LAN-Adapter WiFi:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Medienstatus. . . . . . . . . . . : Medium getrennt
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix: Home
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Qualcomm Atheros AR5B97-Funknetzwerkadapter
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : 94-
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput: Tunneladapter isatap.{8F57A34A-FE47-429C-97D0-AA777D79C23F}:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Medienstatus. . . . . . . . . . . : Medium getrennt
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Verbindungsspezifisches DNS-Suffix:
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Physische Adresse . . . . . . . . : 00-00-00-00-00-00-00-E0
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    DHCP aktiviert. . . . . . . . . . : Nein
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:    Autokonfiguration aktiviert . . . : Ja
[1344] 140604.211758.2092: ClientSetup: Standard Ouptput:
[4504] 140604.211758.2092: ClientSetup: Standard Error:
[5792] 140604.211758.2248: ClientSetup: The exit code of the process (C:\WINDOWS\system32\ipconfig.exe) is: 0
[5792] 140604.211758.2248: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\route.exe" print
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Schnittstellenliste
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   9...16 39 e5 4c c5 f2 ......Virtueller Microsoft-Adapter fr direktes WiFi
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   4...dc 0e a1 06 1f c9 ......Broadcom NetLink (TM)-Gigabit-Ethernet
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   3...94 39 e5 4c c5 f2 ......Qualcomm Atheros AR5B97-Funknetzwerkadapter
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   1...........................Software Loopback Interface 1
[1344] 140604.211758.2404: ClientSetup: Standard Error:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   5...00 00 00 00 00 00 00 e0 Microsoft-ISATAP-Adapter
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: IPv4-Routentabelle
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Aktive Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:      Netzwerkziel    Netzwerkmaske          Gateway    Schnittstelle Metrik
[5792] 140604.211758.2404: ClientSetup: The exit code of the process (C:\WINDOWS\system32\route.exe) is: 0
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:           0.0.0.0          0.0.0.0      192.168.2.1
192.168.2.6     10
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         127.0.0.0        255.0.0.0   Auf Verbindung         127.0.0.1
306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         127.0.0.1 255.255.255.255   Auf Verbindung         127.0.0.1    306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   127.255.255.255 255.255.255.255   Auf Verbindung         127.0.0.1    306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:       192.168.2.0    255.255.255.0   Auf Verbindung       192.168.2.6    266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:       192.168.2.6 255.255.255.255   Auf Verbindung       192.168.2.6    266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:     192.168.2.255 255.255.255.255   Auf Verbindung       192.168.2.6    266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         224.0.0.0        240.0.0.0   Auf Verbindung         127.0.0.1
306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:         224.0.0.0        240.0.0.0   Auf Verbindung       192.168.2.6
266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   255.255.255.255 255.255.255.255   Auf Verbindung         127.0.0.1    306
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   255.255.255.255 255.255.255.255   Auf Verbindung       192.168.2.6    266
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: St„ndige Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   Keine
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
[5792] 140604.211758.2404: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\WINDOWS\system32\nslookup.exe" mars01
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: IPv6-Routentabelle
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: Aktive Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: If Metrik Netzwerkziel             Gateway
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   1    306 ::1/128                  Auf Verbindung
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   1    306 ff00::/8                 Auf Verbindung
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: ===========================================================================
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput: St„ndige Routen:
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:   Keine
[2156] 140604.211758.2404: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Server: UnKnown
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Address: 192.168.3.21
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Name:    mars01.mydomain.local
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput: Addresses: 192.168.3.21
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:    192.168.1.131
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:    192.168.4.31
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
[4504] 140604.211758.2560: ClientSetup: Standard Error:
[1344] 140604.211758.2560: ClientSetup: Standard Ouptput:
[5792] 140604.211758.2560: ClientSetup: The exit code of the process (C:\WINDOWS\system32\nslookup.exe) is: 0
[5792] 140604.211758.2717: ClientSetup: Set CD Fail reason 10 for SQM in ClientDeployment.exe
[5792] 140604.211758.2717: ClientSetup: RecordClientDeploymentFailReason: Save registry failed in ClientDeployment.exe : System.UnauthorizedAccessException: In den Registrierungsschlüssel kann nicht geschrieben werden.
   bei Microsoft.Win32.RegistryKey.EnsureWriteable()
   bei Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions)
   bei Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck)
   bei Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.Helper.RecordClientDeploymentFailReason(UInt32 failReason)
[5792] 140604.211758.2717: ClientSetup: Exiting ValidateUserTask.Run
[5792] 140604.211758.2717: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Failed
[5792] 140604.211758.2717: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
[5792] 140604.211758.2717: ClientSetup: Exting ConnectorWizardForm.RunTasks
[06/04/2014 20:23:38 1730] --------------------------------------------------------------------------------------------------
[06/04/2014 20:23:38 1730] wmain: Start of Computerconnector
[06/04/2014 20:23:38 1730] GlobalData::Initialize (192.168.3.10, C:\Users\johndoe.mydomain\Downloads\ComputerConnector(192.168.3.10).exe)
[06/04/2014 20:23:38 1730] =================================
[06/04/2014 20:23:38 1730] Current Os information:
[06/04/2014 20:23:38 1730] Suite = [256]
[06/04/2014 20:23:38 1730] Type = [1]
[06/04/2014 20:23:38 1730] Architecture = [9]
[06/04/2014 20:23:38 1730] IsStarterEdition = [0]
[06/04/2014 20:23:38 1730] IsHomeSku = [0]
[06/04/2014 20:23:38 1730] Major = [6]
[06/04/2014 20:23:38 1730] Minor = [3]
[06/04/2014 20:23:38 1730] Build = [9600]
[06/04/2014 20:23:38 1730] SPMajor = [0]
[06/04/2014 20:23:38 1730] SPMinor = [0]
[06/04/2014 20:23:38 1730] =================================
[06/04/2014 20:23:38 1730] ExpandEnvironmentStrings return (C:\WINDOWS\Temp\ClientDeploymentTempFiles\)
[06/04/2014 20:23:38 1730] SetPackageDlcUrl: .NET url is set to
http://go.microsoft.com/?linkid=9816306
[06/04/2014 20:23:38 1730] SetPackageDlcUrl: Connector url is set to
http://go.microsoft.com/fwlink/p/?LinkId=275102
[06/04/2014 20:23:38 1730] wmain: Calling Computerconnector::ShowWizard()
[06/04/2014 20:23:38 1730] CComputerconnector::ShowWizard: Initializing common controls
[06/04/2014 20:23:38 1730] CComputerconnector::ShowWizard: Done initializing common controls
[06/04/2014 20:23:38 1730] Displaying the wizard
[06/04/2014 20:23:38 1730] CComputerconnector::WelcomeDlgProc: IDD_PROPPAGE_WELCOME Page Initialization
[06/04/2014 20:23:38 1730] Current user default UI lang setting is 1031
[06/04/2014 20:23:38   c8] CComputerconnector::Run: Installation is ready to run
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: IDD_PROPPAGE_TASKS Page Initialization
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die aktuellen Systemanforderungen werden ermittelt... Index= 0
[06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {21E49794-7C13-4E84-8659-55BD378267D5} returned -1
[06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {46DCED50-3A1D-4EF4-94F0-45F2681E3D70} returned -1
[06/04/2014 20:23:42 1774] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {C1E4D639-4A33-4314-809E-89BD0EF48522} returned -1
[06/04/2014 20:23:42 1774] Connector installation state is 1
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird heruntergeladen... Index= 1
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird installiert... Index= 2
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Der Connector wird heruntergeladen... Index= 3
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Windows Server Essentials Connector wird installiert... Index= 4
[06/04/2014 20:23:42 1774] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die Einrichtung von Windows Server Essentials Connector wird gestartet... Index= 5
[06/04/2014 20:23:42 1774] RunShellExecute: ShellExecute [C:\WINDOWS\system32\Essentials\ClientDeploy.exe] with parameters [ -Server:192.168.3.10 -LaunchedFrom:installer]
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Running
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die aktuellen Systemanforderungen werden ermittelt...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird heruntergeladen...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird installiert...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Der Connector wird heruntergeladen...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Windows Server Essentials Connector wird installiert...
[06/04/2014 20:23:42 1730] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die Einrichtung von Windows Server Essentials Connector wird gestartet...
[06/04/2014 20:23:42 1774] CComputerconnector::Run: Waiting upto 60secs for Sync Event to be signaled
[06/04/2014 20:23:43 1774] CComputerconnector::Run: WaitForSingleObject RetVal = 0
[06/04/2014 20:23:43 1730] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Success
[06/04/2014 20:23:43 1730] wmain: End of Computerconnector: hr=0x0
[06/04/2014 20:54:06 1220] --------------------------------------------------------------------------------------------------
[06/04/2014 20:54:06 1220] wmain: Start of Computerconnector
[06/04/2014 20:54:06 1220] GlobalData::Initialize (192.168.3.10, C:\Users\johndoe.mydomain\Downloads\ComputerConnector(192.168.3.10)(1).exe)
[06/04/2014 20:54:06 1220] =================================
[06/04/2014 20:54:06 1220] Current Os information:
[06/04/2014 20:54:06 1220] Suite = [256]
[06/04/2014 20:54:06 1220] Type = [1]
[06/04/2014 20:54:06 1220] Architecture = [9]
[06/04/2014 20:54:06 1220] IsStarterEdition = [0]
[06/04/2014 20:54:06 1220] IsHomeSku = [0]
[06/04/2014 20:54:06 1220] Major = [6]
[06/04/2014 20:54:06 1220] Minor = [3]
[06/04/2014 20:54:06 1220] Build = [9600]
[06/04/2014 20:54:06 1220] SPMajor = [0]
[06/04/2014 20:54:06 1220] SPMinor = [0]
[06/04/2014 20:54:06 1220] =================================
[06/04/2014 20:54:06 1220] ExpandEnvironmentStrings return (C:\WINDOWS\Temp\ClientDeploymentTempFiles\)
[06/04/2014 20:54:06 1220] SetPackageDlcUrl: .NET url is set to
http://go.microsoft.com/?linkid=9816306
[06/04/2014 20:54:06 1220] SetPackageDlcUrl: Connector url is set to
http://go.microsoft.com/fwlink/p/?LinkId=275102
[06/04/2014 20:54:06 1220] wmain: Calling Computerconnector::ShowWizard()
[06/04/2014 20:54:06 1220] CComputerconnector::ShowWizard: Initializing common controls
[06/04/2014 20:54:06 1220] CComputerconnector::ShowWizard: Done initializing common controls
[06/04/2014 20:54:06 1220] Displaying the wizard
[06/04/2014 20:54:06 1220] CComputerconnector::WelcomeDlgProc: IDD_PROPPAGE_WELCOME Page Initialization
[06/04/2014 20:54:06 1220] Current user default UI lang setting is 1031
[06/04/2014 20:54:06 1404] CComputerconnector::Run: Installation is ready to run
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: IDD_PROPPAGE_TASKS Page Initialization
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die aktuellen Systemanforderungen werden ermittelt... Index= 0
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Running
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die aktuellen Systemanforderungen werden ermittelt...
[06/04/2014 20:54:09 e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {21E49794-7C13-4E84-8659-55BD378267D5} returned -1
[06/04/2014 20:54:09 e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {46DCED50-3A1D-4EF4-94F0-45F2681E3D70} returned -1
[06/04/2014 20:54:09 e90] CMsi::IsMsiInstalled: MsiQueryProductState for ProductCode {C1E4D639-4A33-4314-809E-89BD0EF48522} returned -1
[06/04/2014 20:54:09 e90] Connector installation state is 1
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird heruntergeladen... Index= 1
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=.NET Framework 4.5 wird installiert... Index= 2
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Der Connector wird heruntergeladen... Index= 3
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird heruntergeladen...
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Windows Server Essentials Connector wird installiert... Index= 4
[06/04/2014 20:54:09 e90] CComputerconnector::RunTasks: Running Task: Id=-1 Description=Die Einrichtung von Windows Server Essentials Connector wird gestartet... Index= 5
[06/04/2014 20:54:09 e90] RunShellExecute: ShellExecute [C:\WINDOWS\system32\Essentials\ClientDeploy.exe] with parameters [ -Server:192.168.3.10 -LaunchedFrom:installer]
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: .NET Framework 4.5 wird installiert...
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Der Connector wird heruntergeladen...
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Windows Server Essentials Connector wird installiert...
[06/04/2014 20:54:09 1220] CComputerconnector::TaskDlgProc: DIALOG_TASK_PROGRESS: Task Description: Die Einrichtung von Windows Server Essentials Connector wird gestartet...
[06/04/2014 20:54:09 e90] CComputerconnector::Run: Waiting upto 60secs for Sync Event to be signaled
[06/04/2014 20:54:13 e90] CComputerconnector::Run: WaitForSingleObject RetVal = 0
[06/04/2014 20:54:13 1220] CComputerconnector::TaskDlgProc: DIALOG_UPDATE: Success
[06/04/2014 20:54:13 1220] wmain: End of Computerconnector: hr=0x0

"Bluetooth: Not Available" after upgrading to Yosemite

Hello everyone,
I just upgraded my MacBook Pro (15" with retina) to Yosemite this morning, and could not use my wireless trackpad correctly anymore (i can't scroll or swipe)
The bluetooth icon in status bar is grey and says "Bluetooth: Not Available"
The weird thing is, i'm still using my wireless keyboard and trackpad (i can move the pointer and left-click).
So the bluetooth module is somehow still working.
I tried deleting the "com.apple.bluetooth.plist" file, and the SMC reset "fix".
But it is still .. it remains "not available".
Any ideas ?

Hey there CesarD,
It sounds like your wireless keyboard and trackpad do seem to be working but for some reason the bluetooth icon is grey and you get a message saying that bluetooth is unavailable, even after deleting the bluetooth plist file, and resetting the SMC. I would next do these steps from the following article found here:
OS X: Bluetooth devices become unresponsive
Shut down your Mac, disconnect all USB devices for two minutes, start up, and re-connect your USB devices once again.
If the issue persists, I would next reset your PRAM for good measure:
OS X Mavericks: Reset your computer’s PRAM
Thank you for using Apple Support Communities.
Take care,
Sterling

Not available for upgrade until September, can I still get iPhone 4 in Feb?

I am not available for my new every two upgrade until September, is it possible for me still to purchase the iPhone 4 in early Feb (I believe it's the 3rd) ? Or is this only for customers that are currently up for an upgrade? Also, how much would it be? Please let me know, thank you!!

Unless Verizon surprises us with some special promotions this year, the only way to get the iPhone 4 before you're eligible for an upgrade is to pay full retail. That would be $599 for the 16GB model and $699 for 32GB. If you wait until September, it'll be $199 or $299 with a two-year contract.

Error 8201 (Database version not available) during ODatabase() in VC++

Hello all,
I'm Beginner and i think i have a stupid problem,
when i execute under VC++ V6 SP5 (and IE 5.5 SP2) Under W98se :
OStartup();
ODatabase odb("essai","SYSTEM","manager"); // 'essai' is an existing database, no problem with sql*plus
if (!odb.IsOpen()) {
long err = odb.ErrorNumber();
char chaine[100];
sprintf(chaine,"Error n0=%ld",err);
::MessageBox(0,chaine,"DataBase",0);
Displaying 'Error n08201' : 'Database version not available' ???
PLEASE, THIS PROBLEM TURN ON MY MIND DURING ALL THIS WEEK-END AND I TEST, I RELEASE, I SEARCHE, AND NOTING...

My Reponse from My Question :
It was so easy to run 'lsnrctl start'.
(Listen Module Manager).
2 days to find this.
VB doesn't work anymore.
I've executed an pre-compiled example 'login.exe' which display --> 'No Listen Module'.
Bye All.

[SOLVED] LVM physical volume not available during early boot

Note to self:
Of course it's not available - it's in an encrypted LVM container!
Hi,
I'm trying to get myself a working hibernate but I'm stuck on resume hook not seeing my swap partition.
The swap partition is on an LVM logical volume (LV) which is on one physical volume PV created on a different harddrive than the root partition is. During the bootup I get something similar to "ERROR: hibernation partition '/dev/mapper/volgrp-swap' not found".
Further debugging gave out that for some reason the early userspace has no access to LVM physical volume. I managed to run a shell using break=premount boot parameter. From there I found out that "lvm pvscan" shows no physical volumes at all. I suspect that mkinitcpio does not give a damn about non-root harddrive though I was unable to confirm that and neither was I able to find any other reason for this behaviour.
Relevant lines from mkinitcpio.conf:
MODULES="dm_mod btrfs"
HOOKS="base udev block lvm2 autodetect keyboard encrypt resume filesystems fsck"
Any help would be appreciated, including any tips on where to get more debug data.
cheers,
-miky
Last edited by mr.MikyMaus (2013-09-25 21:32:32)

Fackamato wrote:
Do you have the correct "root=" line in your bootloader's kernel line? Is it in fstab?
Perhaps try with rootdelay=5 as well?
Yes I have root=/dev/mapper/hdgroup0-volroot, and its in fstab (not that fstab is even being read)
root delay wouldn't help at all because after it drops me to a busybox shell I can't do a manual mount.

Flv export still not available after upgrade

After upgrading to Flash CS3 the option to export to flv is
still not available on my Intel Mac from Quicktime Pro or Final Cut
Pro 5.1.14. I upgraded with the understanding that the new version
would be universal binary and would offer this ability that was
there on PPC Macs. Is anyone else having this problem?

Well i solved it my self i just reinstalled the upgrade v30.0.018 and it works just fine now :-D
N97 White (RM-507) V12.2.024
http://www.n97geeks.com/

OVM 3.3.1: NFS storage is not available during repository creation

Hi, I have OVM Manager running on a separate machines managing 3 servers running OVM server in a server pool. One of the server also exports a NFS share that all other machines are able to mount and read/write to. I want to use this NFS share to create a OVM repository but so far unable to get it to work.
From this first screen shot we can see that the NFS file system was successfully added under storage tab and refreshed.
https://www.dropbox.com/s/fyscj2oynud542k/Screenshot%202014-10-11%2013.40.00.png?dl=0
But its is not available when adding a repository as shown below. What can I did to make it show up here.
https://www.dropbox.com/s/id1eey08cdbajsg/Screenshot%202014-10-11%2013.40.19.png?dl=0
No luck with CLI either. Any thoughts?
OVM> create repository name=myrepo fileSystem="share:/" sharepath=myrepo - Configurable attribute by this name can't be found.
== NFS file system refreshed via CLI ===
OVM> refresh fileServer name=share
Command: refresh fileServer name=share
Status: Success
Time: 2014-10-11 13:28:14,811 PDT
JobId: 1413059293069
== file system info
OVM> show fileServer name=share
Command: show fileServer name=share
Status: Success
Time: 2014-10-11 13:28:28,770 PDT
Data:
FileSystem 1 = ff5d21be-906d-4388-98a2-08cb9ac59b43 [share]
FileServer Type = Network
Storage Plug-in = oracle.generic.NFSPlugin.GenericNFSPlugin (1.1.0) [Oracle Generic Network File System]
Access Host = 1.2.3.4
Admin Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 2 = 44:45:4c:4c:47:00:10:31:80:51:b8:c0:4f:35:48:31 [dev2]
Refresh Server 3 = 44:45:4c:4c:33:00:10:34:80:38:c4:c0:4f:53:4b:31 [dev3]
UniformExports = Yes
Id = 0004fb0000090000fb2cf8ac1968505e [share]
Name = share
Description = NFS exported /dev/sda1 (427GB) on dev1
Locked = false
== version details ==
OVM server:3.3.1-1065
Agent Version:3.3.1-276.el6.7Kernel Release:3.8.13-26.4.2.el6uek.x86_64
Oracle VM Manager
Version: 3.3.1.1065
Build: 20140619_1065

Actually, OVM, as is with all virtualization servers, is usually only the head on a comprehensive infrastructure. OVM seems quite easy from the start, but I'd suggest, that you at least skim trough the admin manual, to get some understanding of the conecpts behind it. OVS thus usually only provides the CPU horse power, but not the storage, unless you only want to setup a single-server setup. If you plan on having a real multi-server setup, then you will need shared storage.
The shared storage for the server pool, as well as the storage repository can be served from the same NFS server without issues. If you want to have a little testbed, then NFS is for you. It lacks some features that OCFS2 benefits from, like thin provisioning, reflinks and sparse files.
If you want to remove the NFS storage, then you'll need to remove any remainders of any OVM object, like storage repositories or server pool filesystems. Unpresent and storage repo and delete it afterwards… Also, I hope that you didn't create the NFS export directly on the root of the drive, since OVM wants to remove any file on the NFS export and on any root of ony volume there's the lost-found folder, which OVM, naturally, can't remove. Getting rid of such a storage repo can be a bit daunting…
Cheers,
budy

Bluetooth not available after upgrading to Mountain Lion

Mine is a mid-2011 iMac. I tried all the ways listed in https://discussions.apple.com/message/4874277?messageID=4874277#4874277?messageI D=4874277 but with no luck.
Anyone experienced similar issue with a solution?
Thanks.
Wenbin

Yes, I'm having the exact same problem.
1. Bluetooth not available from the menu option "Bluetooth: Not Available"
2. Yet, my Bluetooth Apple Magic Mouse works as a basic mouse
3. None of my gestures on magic mouse work (scrolling, swiping, etc.)
4. My Apple Bluetooth wireless keyboard works, but the iTunes control from F7 to F12 no longer work as the pictures imply (e.g. F12 should be volume increase, but it goes to Dashboard)
Reboot doesn't fix it. Haven't try safe mode.
APPLE, PLEASE HELP.

Shadow Instance Not starting during upgrade Pre-processing

Hi All,
I am upgrading CRM Dev system from 6.0 to 7.02. I am getting an error during the start of shadow system in pre-processing phase in MAIN_SHDPREPUT/START_SHDI_PREPUT! Please help ASAP.
Last error code set: Shadow instance couldn't be started, check 'STARTSSC.LOG' and 'DEVTRACE.LOG': Process F:\SUM\SUM\abap\exe/sapcontrol.exe exited with 2, see 'F:\SUM\SUM\abap\log\SAPup.ECO' for details.
STARTSSC:
1 ETQ399 SYSTEM HEALTH MANAGER: check for instance processlist.
1 ETQ399 SAPCONTROL MANAGER: getProcessList with host: SAPCRMDEV and instance: 04
3 ETQ120 20150113094015: PID 4656 execute 'F:\SUM\SUM\abap\exe\sapcontrol.exe -format script -prot PIPE -host SAPCRMDEV -nr 04 -function GetProcessList', output written to 'F:\SUM\SUM\abap\log\SAPup.ECO'.
3 ETQ123 20150113094015: PID 4656 exited with status 4 (time 0.000 real)
1 ETQ399 SAPCONTROL MANAGER: get parameter value
3 ETQ120 20150113094015: PID 6968 execute 'F:\SUM\SUM\abap\exe\sapcontrol.exe -prot PIPE -host SAPCRMDEV -nr 04 -function ParameterValue SAPSYSTEMNAME', output written to 'F:\SUM\SUM\abap\log\SAPup.ECO'.
3 ETQ123 20150113094015: PID 6968 exited with status 0 (time 0.000 real)
1 ETQ399 SYSTEM HEALTH MANAGER: running postCheck for instance 04 on host SAPCRMDEV
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '04', GwService = 'sapgw04' Client = '000'
1 ETQ359 RFC Login to: System="CRD", AsHost="SAPCRMDEV" Nr="04", GwHost="SAPCRMDEV", GwService="sapgw04"
2EETQ231 RFC Login failed
2 ETQ399 SYSTEM HEALTH MANAGER: Checking instance number 4 for used ports on host 'SAPCRMDEV'.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 3204 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 3304 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 3604 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 3904 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 8104 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 30401 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 50419 appears to be unused.
1 ETQ399 SAPCONTROL MANAGER: restartService with kernelstate: 0
3 ETQ120 20150113094040: PID 8848 execute 'F:\SUM\SUM\abap\exe\sapcontrol.exe -prot PIPE -host SAPCRMDEV -nr 04 -function RestartService', output written to 'F:\SUM\SUM\abap\log\SAPup.ECO'.
3 ETQ123 20150113094040: PID 8848 exited with status 0 (time 0.000 real)
1 ETQ399 SYSTEM MANAGER: SAPControl tries to control all instances.
1 ETQ399 SYSTEM MANAGER: Calling getInstances.
1 ETQ399 SYSTEM MANAGER: found instance for action START : Instance Number: 04
1 ETQ399 SYSTEM MANAGER: ControlInstance with SAPCONTOL action START for instance 04.
1 ETQ399 SYSTEM HEALTH MANAGER: running preCheck for instance 04 on host SAPCRMDEV.
2 ETQ399 SYSTEM HEALTH MANAGER: Checking instance number 4 for used ports on host 'SAPCRMDEV'.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 3204 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 3304 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 3604 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 3904 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 8104 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 30401 appears to be unused.
3 ETQ399 SYSTEM HEALTH MANAGER: Port 50419 appears to be unused.
1 ETQ399 SYSTEM HEALTH MANAGER: call test rfc.
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '04', GwService = 'sapgw04' Client = '000'
1 ETQ359 RFC Login to: System="CRD", AsHost="SAPCRMDEV" Nr="04", GwHost="SAPCRMDEV", GwService="sapgw04"
2EETQ231 RFC Login failed
1 ETQ399 SYSTEM HEALTH MANAGER: check for instance processlist.
1 ETQ399 SAPCONTROL MANAGER: getProcessList with host: SAPCRMDEV and instance: 04
3 ETQ120 20150113094113: PID 8484 execute 'F:\SUM\SUM\abap\exe\sapcontrol.exe -format script -prot PIPE -host SAPCRMDEV -nr 04 -function GetProcessList', output written to 'F:\SUM\SUM\abap\log\SAPup.ECO'.
3 ETQ123 20150113094113: PID 8484 exited with status 4 (time 0.000 real)
1 ETQ399 SYSTEM HEALTH MANAGER: System is down, go on with start action
1 ETQ399 SAPCONTROL MANAGER: startWait with host: SAPCRMDEV and instance: 04
3 ETQ120 20150113094113: PID 7860 execute 'F:\SUM\SUM\abap\exe\sapcontrol.exe -prot PIPE -host SAPCRMDEV -nr 04 -function StartWait 300 10', output written to 'F:\SUM\SUM\abap\log\SAPup.ECO'.
3 ETQ123 20150113094153: PID 7860 exited with status 2 (time 0.000 real)
1 ETQ399 SYSTEM MANAGER: SAPControl action START failed for instance 04 ('SAPCONTROL MANAGER: call (sapcontrol.exe) failed with return code '-1'
1 ETQ399 SYSTEM MANAGER: CheckSystemStatus.
1 ETQ399 SAPCONTROL MANAGER: getProcessList with host: SAPCRMDEV and instance: 04
3 ETQ120 20150113094153: PID 8728 execute 'F:\SUM\SUM\abap\exe\sapcontrol.exe -format script -prot PIPE -host SAPCRMDEV -nr 04 -function GetProcessList', output written to 'F:\SUM\SUM\abap\log\SAPup.ECO'.
3 ETQ123 20150113094153: PID 8728 exited with status 0 (time 0.000 real)
1EETQ399 SYSTEM MANAGER: START of mandatory instance 04 on server SAPCRMDEV has failed
2EETQ399 Starting shadow instance failed
1EETQ399 Last error code set is: Shadow instance couldn't be started, check 'STARTSSC.LOG' and 'DEVTRACE.LOG': Process F:\SUM\SUM\abap\exe/sapcontrol.exe exited with 2, see 'F:\SUM\SUM\abap\log\SAPup.ECO' for details
1EETQ204 Upgrade phase "START_SHDI_PREPUT" aborted with severe errors ("20150113094153")
DEVTRACE:
trc file: "dev_disp", trc level: 1, release: "721"
sysno      04
sid        CRD
systemid   562 (PC with Windows NT)
relno      7210
patchlevel 0
patchno    400
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
profile    F:\SUM\SUM\abap\system\CRD\SYS\profile\CRD_DVEBMGS04_SAPCRMDEV
pid        8608
kernel runs with dp version 139000(ext=121000) (@(#) DPLIB-INT-VERSION-139000-UC)
length of sys_adm_ext is 592 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (04 8608) [dpxxdisp.c   1323]
shared lib "dw_xml.dll" version 400 successfully loaded
shared lib "dw_xtc.dll" version 400 successfully loaded
shared lib "dw_stl.dll" version 400 successfully loaded
shared lib "dw_gui.dll" version 400 successfully loaded
shared lib "dw_mdm.dll" version 400 successfully loaded
shared lib "dw_rndrt.dll" version 400 successfully loaded
shared lib "dw_abp.dll" version 400 successfully loaded
shared lib "dw_sym.dll" version 400 successfully loaded
shared lib "dw_aci.dll" version 400 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3904
rdisp/dynamic_wp_check : 0
rdisp/calculateLoadAverage : 1
Tue Jan 13 08:53:56 2015
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6525]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
display_tcp_ip: 0
Set Check Logoff Flags to 0x0
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SAPCRMDEV_CRD_04                        <
DpShMCreate: sizeof(wp_adm) 42864 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1392064/1392080
DpShMCreate: sizeof(comm_adm) 1392080 (2768)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000073B0050, size: 7182832)
DpShMCreate: allocated sys_adm at 00000000073B0060
DpShMCreate: allocated wp_adm_list at 00000000073B30B0
DpShMCreate: allocated wp_adm at 00000000073B32A0
DpShMCreate: allocated tm_adm_list at 00000000073BDA20
DpShMCreate: allocated tm_adm at 00000000073BDA70
DpShMCreate: allocated wp_ca_adm at 0000000007900980
DpShMCreate: allocated appc_ca_adm at 0000000007910390
DpShMCreate: allocated comm_adm at 000000000791FDA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000007A73B80
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000007A73C30
DpShMCreate: allocated j2ee_adm at 0000000007A73C70
DpShMCreate: allocated ca_info at 0000000007A74BF0
DpShMCreate: allocated wall_adm at 0000000007A74C80
DpCommAttachTable: attached comm table (header=000000000791FDA0/ft=000000000791FDB0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (8 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use Mutex for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 8191MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 8192MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
*** ERROR => <EsNT> CreateFileMapping name=Global\ES_SEG_04_003 ,size=2044 MB, error=1455 [esnti.c      1278]
* Memory diagnostic                                 *
Systeminformation
Processor-Typ             : Processor-Count           : 4
Operating System          : NT 6.1, Build 7601
Service Pack              : Service Pack 1
NT Pagefile Informations
Config. minimum size      :     0 K
Config. maximum size      :     0 K
Avail. maximum size      :     0 K
| Num|Pagefile                      | Min.Size| Max.Size| Avail.Max| Curr.Size|
|----|------------------------------|----------|----------|----------|----------|
NT Task Manager Informations
Total Handles             :    42631
Total Threads             :     1579
Total Processes           :      124
Commit Charge Total       : 38104688 K
Commit Charge Limit       : 39413172 K
Commit Charge Peak        : 38104688 K
Phys.Memory Total         : 16776696 K
Phys.Memory Available     : 4975120 K
File Cache                :   260104 K
Kernel Memory Total       :   370268 K
Kernel Memory Paged       :   284740 K
Kernel Memory Nonpaged    :    85528 K
Memory usage of current process
Total virt.address space : 0000008589934464 K
Avail.virt.address space : 0000008588857984 K
Private Pages             :        0 K
Total heap size           :    14399 K
Virtual memory regions    :       42 K
Uncommitted heap memory   :     5660 K
Allocated heap memory     :     7949 K
Moveable heap memory      :        0 K
DDE shared heap memory    :     4372 K
Memory usage of all processes
| PID|Image               |Instance   | Work.Set|   WS Peak|Priv.Pages|   PP Peak|Pg Fault|
|----|--------------------|-----------|----------|----------|----------|----------|--------|
|5088|conhost.exe         |           |    1228 K|    3148 K|    1204 K|    7952 K|       0|
|6672|conhost.exe         |           |    1228 K|    3156 K|    1204 K|   35924 K|       0|
|6416|conhost.exe         |           |    1228 K|    3144 K|    1204 K|   35924 K|       0|
|5148|taskhost.exe        |           |    6320 K|   10896 K|    7908 K|    8600 K|     235|
|2576|rdpclip.exe         |           |    6224 K|    8708 K|    2968 K|    3008 K|       3|
|5664|Dwm.exe             |           |    3564 K|    5576 K|    1884 K|    2064 K|       8|
|7232|Explorer.EXE        |           |   28532 K|   45316 K|   30488 K|   32508 K|      26|
|5860|vmtoolsd.exe        |           |    6004 K|   12512 K|    6204 K|    6296 K|      13|
|3824|MagicDisc.exe       |           |    3208 K|    6812 K|    3000 K|    3176 K|       1|
|5600|mmc.exe             |           |    9244 K|   28268 K|   21772 K|   21892 K|      14|
|7952|msg_server.EXE      |[MS] CRD_00|   27324 K|   32816 K|   34368 K|   34636 K|       8|
|8020|conhost.exe         |           |    1244 K|    3152 K|    1216 K|    1332 K|       0|
|5756|disp+work.EXE       |[DP] CRD_00|   25144 K| 126440 K| 107700 K| 109536 K|      32|
|3588|igswd.EXE           |[**] CRD_00|    3740 K|    7808 K|    5252 K|    6364 K|       2|
|5844|conhost.exe         |           |    1300 K|    3340 K|    1224 K|    1340 K|       1|
|6536|conhost.exe         |           |    1244 K|    3172 K|    1216 K|    1332 K|       0|
|7272|igsmux.exe          |           |   30968 K|   30968 K|   37552 K|   37552 K|       9|
|7636|igspw.exe           |           |   30356 K|   38880 K|   39248 K|   39404 K|      37|
|1316|igspw.exe           |           |   30408 K|   38924 K|   39428 K|   39584 K|      37|
| 732|gwrd.EXE            |[GW] CRD_00|   11736 K|   20188 K|   15120 K|   15420 K|       7|
|3908|icman.EXE           |[**] CRD_00| 109388 K| 118116 K| 116920 K| 117744 K|      29|
|7264|disp+work.EXE       |[WP] CRD_00| 139528 K| 444572 K| 133204 K| 242864 K|    2417|
|7620|disp+work.EXE       |[WP] CRD_00|   34728 K| 506312 K| 121364 K| 368924 K|    1174|
|3620|disp+work.EXE       |[WP] CRD_00| 141068 K| 309044 K| 129432 K| 243256 K|    2035|
|7140|disp+work.EXE       |[WP] CRD_00| 148012 K| 289512 K| 125064 K| 257388 K|    2123|
|7296|disp+work.EXE       |[WP] CRD_00|   29664 K|   77940 K| 117004 K| 117272 K|      19|
|5884|disp+work.EXE       |[WP] CRD_00| 149536 K| 592744 K| 127968 K| 309976 K|   11517|
|5236|disp+work.EXE       |[WP] CRD_00| 148264 K| 259552 K| 133824 K| 155352 K|    3329|
|7864|disp+work.EXE       |[WP] CRD_00| 130780 K| 307832 K| 135488 K| 294336 K|    2179|
|7980|disp+work.EXE       |[WP] CRD_00|   32088 K| 239100 K| 118672 K| 118940 K|      65|
|3996|disp+work.EXE       |[WP] CRD_00|   28664 K|   57556 K| 116188 K| 116344 K|      14|
|6140|disp+work.EXE       |[WP] CRD_00|   31348 K| 105800 K| 118016 K| 118172 K|      26|
|7968|disp+work.EXE       |[WP] CRD_00|   27988 K|   54684 K| 115096 K| 115240 K|      13|
|7584|disp+work.EXE       |[WP] CRD_00|   35656 K| 150072 K| 123180 K| 132752 K|      71|
|7856|disp+work.EXE       |[WP] CRD_00|   75496 K| 397344 K| 128608 K| 257352 K|     352|
|6992|disp+work.EXE       |[WP] CRD_00|   34324 K|   97024 K| 121640 K| 121904 K|      31|
|8032|disp+work.EXE       |[WP] CRD_00|   31456 K|   85396 K| 119484 K| 119632 K|      24|
|6196|disp+work.EXE       |[WP] CRD_00|   35688 K| 213644 K| 123180 K| 123632 K|      80|
| 628|disp+work.EXE       |[WP] CRD_00|   30756 K|   73208 K| 118884 K| 119040 K|      20|
|3684|disp+work.EXE       |[WP] CRD_00|   41876 K|   69024 K| 117412 K| 117688 K|     166|
|5456|disp+work.EXE       |[WP] CRD_00|   28516 K|   55980 K| 116140 K| 116296 K|      13|
|5580|jcontrol.EXE        |[**] CDJ_02|    4960 K|   18960 K|   11776 K|   16620 K|       7|
|3608|igswd.EXE           |[**] CDJ_02|    2948 K|    7460 K|    4120 K|    5680 K|       2|
|7480|conhost.exe         |           |    1236 K|    3168 K|    1212 K|    1332 K|       0|
|4768|conhost.exe         |           |    1248 K|    3168 K|    1216 K|    1332 K|       0|
|5760|igsmux.exe          |           |   21512 K|   21512 K|   27372 K|   27372 K|       6|
|6996|igspw.exe           |           |   30516 K|   39044 K|   39524 K|   39716 K|      37|
|3508|igspw.exe           |           |   30244 K|   38752 K|   38560 K|   38712 K|      37|
|3368|msg_server.EXE      |[MS] CDJ_03|    9588 K|   15004 K|   15408 K|   15560 K|       3|
|7260|enserver.EXE        |[**] CDJ_03|   17396 K|   25324 K|   62652 K|   62800 K|       6|
|2376|conhost.exe         |           |    1240 K|    3144 K|    1212 K|    1332 K|       0|
|6884|conhost.exe         |           |    1244 K|    3148 K|    1216 K|    1332 K|       0|
|4264|cmd.exe             |           |    1132 K|    3176 K|    2372 K|    3468 K|       0|
|5196|conhost.exe         |           |    1472 K|    3840 K|    1332 K|    1452 K|       1|
|5800|jlaunch.exe         |           | 157752 K| 236956 K| 411928 K| 423684 K|      96|
|3636|jlaunch.exe         |           | 892232 K| 909720 K| 2438664 K| 2459780 K|     428|
|5216|jlaunch.exe         |           | 161616 K| 175812 K| 209044 K| 211344 K|      64|
|5928|cmd.exe             |           |    1176 K|    3156 K|    2408 K|    3504 K|       0|
|7672|conhost.exe         |           |    1448 K|    3600 K|    1312 K|    1428 K|       1|
|2732|java.exe            |           | 300320 K| 328740 K| 405232 K| 422776 K|     161|
|5192|iexplore.exe        |           |   16248 K|   31204 K|   11508 K|   12872 K|      11|
|6364|IEXPLORE.EXE        |           |   16700 K|   35472 K|   15356 K|   19092 K|      11|
| 256|javaw.exe           |           | 130904 K| 187428 K| 293136 K| 355476 K|     288|
|2812|SAPup.exe           |           | 151960 K| 372148 K| 150948 K| 367436 K|     848|
|6876|conhost.exe         |           |    1112 K|    3032 K|    1176 K|    3180 K|       0|
|2276|saposcol.exe        |           |   18312 K|   22844 K|   20364 K| 1390432 K|      71|
|6908|sapstartsrv.exe     |           |   84424 K|   84424 K| 109840 K| 169528 K|      52|
|9108|sapcontrol.exe      |           |   12176 K|   12176 K|    9588 K|    9588 K|       3|
|3504|conhost.exe         |           |    3072 K|    3072 K|    1196 K|   34964 K|       0|
|5628|msg_server.EXE      |[MS] CRD_04|   14264 K|   14264 K|   15384 K|   15388 K|       3|
|5572|conhost.exe         |           |    3108 K|    3108 K|    1212 K|    1212 K|       0|
|8888|enserver.EXE        |[**] CRD_04|   41128 K|   41128 K|   17576 K|   17580 K|      10|
|8412|conhost.exe         |           |    3104 K|    3104 K|    1216 K|    1216 K|       0|
|8608|disp+work.EXE       |           |   49264 K|   49264 K|   80656 K|   85836 K|      20|
|9088|conhost.exe         |           |    3116 K|    3116 K|    1212 K|    1212 K|       0|
|----|--------------------|-----------|----------|----------|----------|----------|--------|
|    |Sum                 |           | 3883240 K|**********| 7343856 K|**********|********|
Tue Jan 13 08:53:57 2015
*** Error 11 while initializing OS dependent part.
*** ERROR => DpEmInit: EmInit (1) [dpxxdisp.c   10995]
*** ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c   10909]
*** DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jan 13 08:54:07 2015
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)   Tue Jan 13 13:54:07 2015
========================
No Type Pid    Status Cause Start Rstr Err Sem Time Program          Cl User         Action                    Table
Dispatcher Queue Statistics   Tue Jan 13 13:54:07 2015
===========================
+------+--------+--------+--------+------------+------------+
| Typ |    now |   high |    max | writes     | reads     |
+------+--------+--------+--------+------------+------------+
| NOWP |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
| DIA |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
| UPD |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
| ENQ |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
| BTC |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
| SPO |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
| UP2 |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 0
wake_evt_udp_now 0
wake events       total     0, udp     0 ( 0%), shm     0 ( 0%)
since last update total     0, udp     0 ( 0%), shm     0 ( 0%)
Dump of tm_adm structure:   Tue Jan 13 13:54:07 2015
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks   Tue Jan 13 13:54:07 2015
=============================
Slots: 1000, Used: 0, Max: 0
+------+--------------+----------+-------------+
|   id | owner        |   pid    | eyecatcher |
+------+--------------+----------+-------------+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jan 13 08:54:12 2015
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPCRMDEV_CRD_04                        < (normal)
DpJ2eeDisableRestart
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: not attached to the message server
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 8608) [dpxxdisp.c   11819]
DpHalt: Good Bye .....
trc file: "dev_ms", trc level: 1, release: "721"
[Thr 8464] Tue Jan 13 08:53:49 2015
[Thr 8464] ms/http_max_clients = 500 -> 500
[Thr 8464] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid   562 (PC with Windows NT)
relno      7210
patchlevel 0
patchno    327
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
pid        5628
[Thr 8464] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5628) [msxxserv.c   2305]
[Thr 8464] MsInitAclInfo: acl file F:\SUM\SUM\abap\system\CRD\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 8464] MsGetOwnIpAddr: my host addresses are :
[Thr 8464]   1 : [192.168.200.142] SAPCRMDEV.CRESTRON.CRESTRON.com (HOSTNAME)
[Thr 8464]   2 : [127.0.0.1] SAPCRMDEV.CRESTRON.CRESTRON.com (LOCALHOST)
[Thr 8464] MsHttpInit: full qualified hostname = SAPCRMDEV.CRESTRON.CRESTRON.com
[Thr 8464] HTTP logging is switch off
[Thr 8464] MsHttpOwnDomain: own domain[1] = CRESTRON.CRESTRON.com
[Thr 8464] *** I listen to port 3604 (3604) ***
[Thr 8464] *** I listen to internal port 3904 (3904) ***
[Thr 8464] CUSTOMER KEY: >G0021204657<
[Thr 8464] build version=721.2014.07.17
Thanks,
Kavitha Rajan.

Hi Kavitha,
Hope you are doing good.
Looks like a memory issue:
EsNT> Memory Reset disabled as NT default
*** ERROR => <EsNT> CreateFileMapping name=Global\ES_SEG_04_003 ,size=2044 MB, error=1455 [esnti.c      1278]
Tue Jan 13 08:53:57 2015
*** Error 11 while initializing OS dependent part.
*** ERROR => DpEmInit: EmInit (1) [dpxxdisp.c   10995]
*** ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c   10909]
*** DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
First restart Windows and then try to start the SAP system from the MMC.If that doesn't help then increase the pagefile size and restart the Windows.
Kind Regards,
Hemanth
SAP AGS

Shared data plans not available when upgrading to iphone5

Last night I upgraded two 3G smartphone and a basic phone to iphone5's for all three of us. Currently on shared unlimited data/text and 1400 min. shared voice. The ordering process would not allow me to select the new tiered shared data plans. It only made individual data plans available and these were combined with aspects of the old plan ($10/month access fee, 1400 shared minutes, etc.). My chat with customer rep "Sunny" was inconclusive as he/she only stated that I couldn't order new phones and the new shared data plan all at once, but would have to order the phones and then switch the data plan after phones are activated (shipping 10/26).
Anybody else gone through this frustrating process? Should I just wait until the iphone5's show up and try to switch plans then? Or should I sit through the 30-45 minutes customer service hold time and try to resolve this now?
Thanks.
Ken

Ordering online usually doesn't allow for more than one change to the account at a time. You have to complete the upgrade in one step. Then once that is finalized in the account, then you can change to the Share Everything plans.
You might be able to complete both changes at same time if you ordered through customer service via phone.

Amplitube is not available after upgrading OSX 10.4.8 to 10.5.4

Hi I have enjoyed using Amplitube X-gear (with Amplitube 2.0, Metal, Hendrix and Amplitube Live) for months. I have upgraded to OSX 10.5.4 recently. Now only Amplitube Jimmy Hendrix is available in Logic. I installed the latest updates for Logic and now running 8.02. I have just checked Garageband... and there is no problem. The entire Amplitube set is ok, all available in Garageband. Any idea...?

I just did as you said. I have run preferences/audio units manager and re-scanned ... i had to force them to recheck. No, when I open a project that uses Amplitube Logic doesn't give me a warning about Amplitube not being available. Instead in the channel strip/inserts drop down menu/audio units/[incompatible]/IK Multimedia/Amplitube...
Funny, but it works. Is there any way i could fix this, i mean go back to normal. I don't want to have any trouble with htis when working...?

FCP not available during upgrade

Similar Messages

Maybe you are looking for