FCP on Intel Macs users yet?

Is there users already using the universal version on the new Intel Macs? If so, any issues, warnings, etc.?
iMac Intel Mac OS X (10.4.6)

Mark:
I couldn't find anything either on the performance with the MacBook Pros on this board.
There was a German site that indicated significantly performance gains over the G4 laptop that rivaled running the non-Intel version on a desktop dual processor 2 Ghz G5.
Hope this helps.

Similar Messages

FCP and Intel Macs no go?

For all who are asking whether rosetta will enable current versions of FCP to run on the new intel macs take a look at this article (near the bottom of the page)
http://www.extremetech.com/article2/0,1697,1910879,00.asp

Read this:
http://www.apple.com/finalcutstudio/topquestions.html
"Does Final Cut Studio run on the new Intel-based Mac computers?
The current version of Final Cut Studio is not supported on Intel-based Mac computers with Rosetta. A Universal version of Final Cut Studio will be available before the end of March 2006. Universal applications are designed to run flawlessly on both Intel- and PowerPC-based Mac computers.
If I buy Final Cut Studio today, can I get the Universal version when it’s available?
Yes. All owners of Final Cut Studio are eligible for a low-cost “crossgrade” to the Universal version for $49."

Telestream releases Flip4Mac WMV QuickTime component for Intel Mac users

This is something that all Mac users who would like to easily listen to/watch Windows Media content, should download.
Macnn artile [ http://www.macnn.com/articles/06/07/28/universal.wmv.player.ships/ ]
Flip4Mac WMV free download [ http://www.flip4mac.com/wmv_download.htm ]

I miss my Fells Point bars...
Remove the component:
PlugIn Path: /Library/QuickTime/3DxQuickTime.component/Contents/MacOS/3DxQuickTime by dragging it to your Desktop.
Also remove this item:
x1e3000 - 0x1edfff +com.unsanity.smartcrashreports Smart Crash Reports version 1.5b3 (1.5b3) <7E3E7D42-BB62-6D09-E262-0140BA963851> /Library/InputManagers/Smart Crash Reports/Smart Crash Reports.bundle/Contents/MacOS/Smart Crash Reports

Radikal Tech SAC 2.2 and FCP on Intel Macs

Hi!
I found a great deal on a Radikal Tech SAC 2.2 Control Surface. As my primary focus is Logic Audio I already have that covered, but as frequent Final Cut user my concern is that it should also work with said system.
I know the SAC 2.2 works in full Logic/Mackie Control emulation mode, but I was wondering if there were any other caveats I should be aware of before making this purchase.
Thanks!

The SAC 2.2 was discontinued by Radikal due to ROH initiatives in Europe. Radikal told me they don't intend to even update the software anymore so while it does work in Logic emulation mode there won't be any fixes for bugs. Its sad to see such a worthy competitor (is something better still a competitor) to the MCU go the way of the warrior.

Using MS UAM with Intel Macs and Tiger (10.4.6+)

I oversee 50 macs in a server environment. The servers are windows server 2003. About 40 of the macs are able to change their network password via the MS UAM. The remaining macs are intel 10.4.6 and above or intel leopard machines.
Goal: The ability of intel mac users running 10.4.6 and above (leo too) to change their network password.
Let me be clear about the problem.
I have no problem connecting to any share / volume on any server. All file sharing is working properly. The only problem I have is that my users cannot change their password that the network requires for authentication. So, when the password expires, they have to go to a windows machine or use a non-Intel Mac. (I am not 100% sure, but I think this is also happening on 10.4.6+ PPC Mac's...correct me if I'm wrong)
Searching for a solution to this problem was unsuccessful. I found that there is no easy way to get the mac os to use the MS UAM instead of the OS X standard UAM's.
I came across a couple of articles from 2006 (two years ago) that stated there was no fix for this problem, but that apple was working on it. I am starting this thread to renew the subject matter. Does anyone know of a fix for this problem yet? Has Apple stated awareness that the problem exists? Has Apple stated that a fix is in the works?
Please HELP!!!

We have the same problem here --- a high school of mostly Mac clients and only Window Servers.
Hate to think that everyone has to be funneled to an older Mac or a PC in order to do password changes.
I searched <http://www.mactopia.com> about this only to be further 'scared' by what William Smith of Microsoft says in <http://www.officeformac.com/.ee9b2bd>:
-----You should really consider using some third party software. Mac OS X 10.4
-----and higher use AFP 3.2, which has some incompatibilities with AFP 2.2.
-----Microsoft is not planning to update Windows Server with AFP 3.2 but
-----will instead remove File Services for Macintosh altogether after Windows Server 2003.
-----Look into Group Logic's ExtremeZ-IP http://www.grouplogic.com or
-----Thursby's Dave or ADmitMac http://www.thursby.com.
-----Hope this helps!
-----bill
----William M. Smith, Microsoft Interop MVP - Mac/Windows
Note the: 'will instead remove File Services for Macintosh altogether after WindowsServer 2003.'
That will make things even worse for those of us with Mac clients and Window Servers.
Fred Gervasoni
Joel Barlow High School

Consequences of installing G5 Leopard on Intel Mac?

I bought an Intel iMac off of eBay, and it came shipped with OS X 10.4. I had a non-retail replacement DVD of 10.5 from when I had an AppleCare problem with my iMac G5, so I tried to use that disc to upgrade my OS. It never worked correctly, and on the Apple forums I was told that the replacement DVD would be hardware-specific and not function.
However, a new phenomenon has occurred.. If I completely install Tiger with the hardware-specific discs that came with my intel Mac, and then simply upgrade to Leopard- the install succeeds and the computer is ESSENTIALLY functional.
It's not perfect though. What I've observed is that (today was the 2nd time this has happened) after a couple days of untinterrupted use (including powering down/up) and having a seemingly functional iMac-- everything goes very wrong. The computer slows down to a crawl, so I leave it alone; then when the beachball goes away, I try to click something. No matter what App I choose, it will freeze up once it begins, and everything I click suddenly stops working.
So do you think this is a consequence of installing a leopard disc with G5 architecture, or that these symptoms are indicative of something wrong with the iMac itself (possibly bad RAM?). What seems strange is the install does succeed with the upgrade, and the computer works great for a good while- and then suddenly stops. One thing that always confuses/annoys me is when computers aren't consistent... I mean, theyre computers!
Please share your thoughts, thank you!

In short: A PPC Mac cannot boot an Intel version of OS X and vice-versa. You will need a full retail version of Leopard that can install either the PPC or the Intel version of OS X. Or as you have discovered your Upgrade disc will install an Intel upgrade to an Intel version of Tiger or a PPC upgrade to a PPC version of Tiger, but it will not performa a full Erase and Install.
As for migrating from a G5 to an Intel Mac see the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

It's impossible to create Enhanced Podcasts on Intel Macs. Please read.

After vast amounts of frustration trying to create an Enhanced Podcast on my MacBook Pro, I tracked down the source of the problem:
$ file /Applications/GarageBand.app/Contents/MacOS/ChapterTool
/Applications/GarageBand.app/Contents/MacOS/ChapterTool: Mach-O executable ppc
GarageBand uses ChapterTool to add the artwork and chapter stops to the AAC file, and ChapterTool is PPC only. Command-line applications do not run under Rosetta. Simply put, there's no way to author enhanced podcasts if you're using an Intel Mac. None. Every other tool out there to do so needs ChapterTool, too.
Pathetic. If you, like me, are an Intel Mac user who'd like to create Enhanced Podcasts, provide some feedback to Apple: http://www.apple.com/feedback/garageband.html
15.4" MacBook Pro, 2ghz, 2gb, 100gb @7200rpm Mac OS X (10.4.8)

Simply put, there's no way to author enhanced podcasts if you're using an Intel Mac.
Sorry, but I don't buy this. Just created an Enhanced Podcast without any problems. And given that the whole podcast stuff was introduced together with the Intel Macs, we would have heard a lot of complaints here in the forum during the last 10 months. You're the first.

Photoshop on Intel Mac?

Can anyone share their experiences actually using Photoshop and third party plug-ins on an Intel Mac?
I need to buy a second Mac for professional use and am torn between buying Intel vs G4/G5 which of course is being phased out. I realize that all the lab tests say Photoshop runs at half speed on Intel models, but I want to hear from someone who actually uses it routinely.
Does Photoshop work predictably and reliably on Intel Macs? Is it adequately fast for less than constant use? Do the plug ins work? How about Illustrator? Any other Intel Mac user comments?
I hate to buy a discontinued G4/G5 if I don't need to, but will do that if necessary to do my work.
Thanks for any help you can provide!
Greg

Hi, this is sort of a related issue but not one re: Photoshop, I use Nikon products, Capture 4 etc. However, since I purchased my Mac with the Intel Core, I've been told that it won't run. Fair enough, but I'm now being told by Nikon that the new Capture NX isn't going to work either. Can someone tell me why a product designed to work on OSx won't work on an Itel Mac. Sorry if this is a stupid question but I'm new to this problem...

Are there any speed tests for FCP 5.1 on a Intel Mac yet?

You know like something Macworld would post up. I thinking of getting either a G5 power Mac or the Mac Pro. But I want a stable system that runs FCP well.
Mac OS X (10.4.2)

At www.creativecow.com in the FCP forum a guy by the name of Peter Wiggins did a test between his 15" MacBook Pro and his Dual 2Ghz G5 and said that in many cases, the MBP was faster. Go over there and do a search for Peter Wiggins and Mac Book Pro and see if you can't find that.
Both systems are very stable with FCP. But if you are doing any serious professional work I would always recommend a tower over a laptop...unless you NEED to be mobile. The expandibility of additional firewire slots, connection to external RAIDED drive and addition of a capture card are all BIG plusses.
Shane

I bought adobe CS6 design standard (CD) last year in the month of july and didn't active my product yet. I bought in from the University of Washington, Seattle store on a student and teacher licensing. I am a Mac user and I don't have cd drive in my compu

I bought adobe CS6 design standard (CD) last year in the month of july and didn't active my product yet. I bought in from the University of Washington, Seattle store on a student and teacher licensing. I have the product code with me. I am a Mac user and I don't have cd drive in my computer and I am indeed to get this product activated now. How can I install this without cd drive? Anyone please help me with this issue?

You may download the product from
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

FCP 4.5 on Intel Mac?

A couple of general compatibility questions:
Will an Intel-based Mac run Final Cut Pro HD 4.5?
Also, will a PPC running Leopard do all right with 4.5?
Thanks.

David is correct to say that FCP 4.5 is not supported on Intel machines, but FCP 4.5 will run fine on 10.5 and 10.5.6 on Intel Macs. I'm running it now on a unibody 2.53 MBP. You need to follow the advice here:
http://tinyurl.com/a4lt79

My Intel Mac has a User Agent String that is Reading it as a Power PC (PPC)

Hi. I am hoping someone might be able to help me with an unusual situation. I have been trying to watch online streaming of the Olympics with my MacBook Pro (2.2 Ghz Intel Core 2 Duo). I have updated my browsers to the newest versions and have installed the newest Silverlight from Microsoft in order to ensure compatibility with the nbcolympics.com website. Even so, when I try to get onto the video section, it tells me I have browser or system incompatibilities. I corresponded with the tech person on the olympics website and he looked at my user agent string which (with firefox) reads as follows: "Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10.4; en-US; rv:1.9.0.1) Gecko/2008070206 Firefox/3.0.1" I do not have a PPC mac, it is an Intel Mac. Because the olympics website reads it as a powerpc I cannot get onto the video section. Does anyone know what's happening? Ive searched user forums throughout the internet and have not found an answer. Thanks for any help or direction.

Hi mfwoodwin, and a warm welcome to the forums!
Many Applications are still PPC & run under Rosetta...
http://en.wikipedia.org/wiki/Rosetta_(software)
Some APPs can be chosen to run in PPC or Intel, quit them All, do a Get Info on say FireFox, see if it has a "Use Roseeta" check box, (not on an IntelMac at the moment to see what it is actually called).

FCP, Intel mac pro crashing

SO here is the set up
Dual 2.66 Intel mac pro, 4gb ram, system drive is 500gb, AV drive is over fibre channel.
OS is 10.4.8 FCP 5.1.2
all is fresh install on new system, working good for the first week.
The issues are when I go to render out I get maybe to 75% then the system crashes, get the screen that tells me I have to hold down the power button etc.
The project file contains 1 stream of DV footage and 1 Livetype movie, seems to not like the live type, but crashes with or without it, just faster with.
On a side note a second issue has been trying to burn to dvd, it will crash the same way, after completeing 25-50%, making coasters.
this isuue is present in both machines we have which are identical.
I also have one of them with the loud fans, straight out of the box, reminded me of my old g4 dual 1.25 mdd.. Firmware is up to date on it. Both machines are new within the last 2 weeks.
here is the crash report.
Date/Time: 2006-10-17 15:35:14.346 -0500
OS Version: 10.4.8 (Build 8L2127)
Report Version: 4
Command: Final Cut Pro
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Parent: WindowServer [60]
Version: 5.1.2 (5.1.2)
Build Version: 3
Project Name: FCPApp
Source Version: 609211640
PID: 244
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x000069b0
Thread 0 Crashed:
0 com.apple.FinalCutPro 0x0000a424 VEFrames2TimeCode + 292
1 com.apple.FinalCutPro 0x00020c86 DispatchHashDict(KGDictSelector, KGDictInt*, KGDictParams*) + 4336
2 com.apple.FinalCutPro 0x00105e53 KGDictTransferC(KGDictInt*, KGDictInt*, KGDictTransferType, Path*, Path*) + 177
3 com.apple.FinalCutPro 0x00105e8c pKGDictTransfer(KGDictInt*, KGDictInt*, KGDictTransferType, ...) + 50
4 com.apple.FinalCutPro 0x0034cb75 pKGClipNewFromItemsFull(KGDictInt**, KGItemSpec*, double*, long, KGClipNewFlag, KGDictInt**) + 10939
5 com.apple.FinalCutPro 0x0034d3dd pKGClipNewFromItems(KGDictInt*, KGItemSpec*, long, unsigned char, unsigned char, unsigned char) + 153
6 ...Pro.Plugins.Timeline Editor 0x08aac6bf TLSetCenterFrame(TimelineViewRecord*, unsigned char, long) + 16843
7 ...Pro.Plugins.Timeline Editor 0x08abcec6 TLShowReelDupes(KGDictInt*) + 3878
8 ...Pro.Plugins.Timeline Editor 0x08ad6d2d DisposeMenuStrings() + 53723
9 com.apple.FinalCutPro 0x001108a2 pKGDragMouseMove(KGPoint*, KGDragRefRec*) + 826
10 ...FinalCutPro.Plugins.Browser 0x0866c7db ComputeLayoutInfo(BrowserRec*) + 7745
11 ...FinalCutPro.Plugins.Browser 0x08671c39 ComputeLayoutInfo(BrowserRec*) + 29343
12 com.apple.FinalCutPro 0x00275c43 PPassMouseEvent(KGPanelRecord*, KGDictInt*, long) + 1483
13 com.apple.FinalCutPro 0x0027ed91 pKGPanelMessage(long, long, KGDictInt*, KGViewRecord*) + 97
14 com.apple.FinalCutPro 0x0023049d ServicesPanelsMessageProc(long, long, KGDictInt*, KGPanelRecord*) + 109
15 com.apple.FinalCutPro 0x00231773 BrowserMessageProc(long, long, KGDictInt*, KGPanelRecord*) + 101
16 com.apple.FinalCutPro 0x002753fb pKGPanelWindowProc(long, long, KGDictInt*, void*) + 53
17 com.apple.FinalCutPro 0x0028a09b pKGSendWindowMessage(KGWindowRec*, long, long, KGDictInt*) + 93
18 com.apple.FinalCutPro 0x00140353 HandleMouseDown(OpaqueEventRef*) + 2443
19 com.apple.FinalCutPro 0x00140b47 DoEvent(OpaqueEventRef*, KGDictInt*) + 685
20 com.apple.FinalCutPro 0x003cd341 Events(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 69
21 com.apple.HIToolbox 0x92dd686b DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1093
22 com.apple.HIToolbox 0x92dd5f10 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 304
23 com.apple.HIToolbox 0x92ddd1f0 SendEventToEventTarget + 56
24 com.apple.HIToolbox 0x92ddd683 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 1169
25 com.apple.HIToolbox 0x92dd6c22 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2044
26 com.apple.HIToolbox 0x92dd5f10 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 304
27 com.apple.HIToolbox 0x92ddd1f0 SendEventToEventTarget + 56
28 com.apple.HIToolbox 0x92e210c7 ToolboxEventDispatcher + 81
29 com.apple.HIToolbox 0x92e1fadf RunApplicationEventLoop + 165
30 com.apple.FinalCutPro 0x0013cfb4 KGMainEvent(void*) + 46
31 com.apple.FinalCutPro 0x0028dccf main + 59
32 com.apple.FinalCutPro 0x00002fc6 _start + 228
33 com.apple.FinalCutPro 0x00002ee1 start + 41
and
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x000069b0 ebx: 0x00000001 ecx: 0x30ef9a21 edx: 0xbfffdab4
edi: 0x20d211b0 esi: 0xbfffdc6c ebp: 0xbfffdad8 esp: 0xbfffda9c
ss: 0x0000001f efl: 0x00010246 eip: 0x0000a424 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
any help would be mucho appreciated!
cheers
-David

So I was getting prepared to reinstall the OS and all the software, decided to dig a bit more first. Looked at this log
Wed Oct 25 12:43:48 2006
panic(cpu 3 caller 0x003A1D25): getPhysicalSegment() out of 32b range 0x1001fd000, len 0x1000, class IOGeneralMemoryDescriptor
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x47c03398 : 0x128d1f (0x3c9540 0x47c033bc 0x131df4 0x0)
0x47c033d8 : 0x3a1d25 (0x3ed64c 0x1fd000 0x1 0x1000)
0x47c034a8 : 0x39f8b1 (0x6f27380 0x0 0x47c034ec 0x3bc21c)
0x47c03508 : 0xc8deff (0x64747a0 0x6f27380 0x0 0x5ed230b8)
0x47c03578 : 0xc7c50b (0x6472600 0x64af500 0x0 0x1a1ec0)
0x47c035a8 : 0x5fa88b (0x651e300 0x7033900 0x47c035cc 0x47c035c8)
0x47c035d8 : 0xc38cec (0x651e300 0x7033900 0x0 0xc39020)
0x47c03648 : 0xc3646c (0x6525c00 0x6f27380 0xde5e868 0x0)
0x47c036c8 : 0x51a020 (0x65a8380 0x6f27380 0xde5e868 0x0)
0x47c03768 : 0x51d38b (0x6df5300 0xcbd0d000 0x1b 0x6f27380)
0x47c037e8 : 0x522da1 (0x6df5300 0xcbd0d000 0x1b 0x6f27380)
0x47c03888 : 0x522e48 (0x0 0x0 0x47c038f8 0x1ef607)
0x47c03898 : 0x1ef607 (0x5a8cf820 0x200ba9 0x0 0x1)
0x47c038f8 : 0x1c0a02 (0x47c039d8 0x47c03954 0x16 0x62f0a2c)
0x47c03998 : 0x2fab82 (0x6e35c60 0x47c039d8 0x47c039e8 0x1bf216)
0x47c039b8 : 0x1e4362 (0x47c039d8 0x47c039c8 0x4d2200 0x63a3604) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOSCSIBlockCommandsDevice(1.5.1)@0xc35000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(1.5.1)@0x5f5000
dependency: com.apple.iokit.IOStorageFamily(1.5.1)@0x515000
com.ATTO.driver.ATTOCelerityFC(2.4.1)@0xc7f000
dependency: com.apple.iokit.IOSCSIParallelFamily(1.4.3)@0xc78000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x5a1000
com.apple.iokit.IOSCSIParallelFamily(1.4.3)@0xc78000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(1.5.1)@0x5f5000
com.apple.iokit.IOSCSIArchitectureModelFamily(1.5.1)@0x5f5000
com.apple.iokit.IOStorageFamily(1.5.1)@0x515000
Kernel version:
Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386
Common on both machines, both macchines have the ATTO Celerity PCI Express card for the fibre channel. So I went to ATTO's site looking for new drivers and found this
"ATTO's UL5D and Celerity PCI Express adapters will work in the MAC Pro, however; there is a temporary issue with the systems containing 2.5 GB or more RAM. Please limit the RAM to less than 2.5 GB until this can be resolved. Also, ATTO Configuration Tool version 3.6 will not function properly. Please watch our web site for solutions to both of these issues after 10/21/06."
So tomorrow I will bring both machines and hook back up to the terrablock and try it out with 2 gb ram rather than 4gb.
By looking at this panick log, am I right to assume because I see the ATTO in the log it could be the issue? Looking in google for anyone talking about this I found 1 where they said the temp issue as ATTO put it is a freeze/bomb issue. I will hopefully be able to check it out tomorrow, if I get out of training soon enough.
Any more input is always welcome.
Thanks

Intel Mac and FCP

I have a lab full of macs. All g5 dual 2.5s. We are running OS 10.4.9, and FCP 5.1.4. They run perfectly. No problems.
A month ago I replaced two of these edit stations with two Intel Mac Pro dual 2.6, dual core Macs w/ 4gb of ram. They are running 10.4.9, and FCP 5.1.4 as well, but FCP freezes up constantly on these. I have run the 10.4.9 combo update on both. Same problem. Any ideas? Anyone run into this one as well?

Wondering if there might be a problem with your RAM. Run hardware tests and if possible, Techtool. Also, try editing with some media on your internal drive with graids disconnected. I've had a lot of problems with various firewire drives (although I worked with a multitude of firewire drives for many years without serious problems). Worth a shot to try and isolate the problem.
And although you said you were working in SD, you didn't say what format. DV? If so, do you have a deck and/or converter connected to your computers?

Realplayer and Intel Mac - anyone got to the bottom of it yet?

I think I understand the Real website to say that current realplayer works on Intel Mac, whereas I believe previous download would not.
I have downloaded and it runs but no sound.
I have set Audio Input in Audio/MIDI to 44100 (this correct? Under Audio Output it says "Output not supported, not sure what that refers to).
I have opened and closed Garage Band.
I have used Get Info to get Realplayer to run in Rosetta.
Anyone know what I need to do to get sound from this thing?
Worminger

See my separate posting on this

FCP on Intel Macs users yet?

Similar Messages

Maybe you are looking for