FCP only capturing one channel. what's up with that!?

in FCP 7 while i am logging and capturing HDV footage off of my canon XLH1, only one channel of audio is captured. originally the audio was shot using 2 separate channels, in fact, i can hear both channels playing back (each on their own sound level/they are not mixed) while the capture is happening.. but when i'm done, FCP has only captured one of the channels.
how can i resolve this problem?

in my capture bin, after i've captured the clip, it shows that only one audio clip was captured. when i drag it into the timeline, only one audio channel is present.
my lost channel was on a wireless mic, as was the saved channel.
fcp is only capturing one channel even when i log other tapes that did not have separated audio channels.
i'm guessing there is some setting that is now off while i capture, because it used to capture audio just fine last week.

Similar Messages

Capture Prob -- only capturing one channel of sound

I'm capturing hdv, as I always do, but for some reason I'm only getting one track Mono A1 of sound. When playing back or capturing, I am hearing both tracks, left and right, playing through my speakers.
But when I capture, I only get one track. I need the second track because I had two mikes and two separate channels coming through.
Any suggestions on what I can do? Can't figure why it's only capturing one side of audio... Thanks.

re: the decklink comment - that was directed to the thread jacker ... lol.
re: cloned system drives. Updating does not create a clone automatically. It is something you have to do. In the interest of locking the barn door after the paddle has been lost upstream - get a firewire drive as large as your system drive. Download a copy of Carbon Copy Cloner (shareware) and when your system gets working again, Clone the working drive to the firewire drive. This is your insurance when you update the OS, QT and/or any of the FCS pro apps.
Once you have a clone, if your update goes wrong, you can copy the clone back over the bunged installation and be back up and running within an hour or so.
Regarding FCP 6.0.4, perhaps someone archived a version (or you can find it on the FCP updates page). If you use Software update, it will want to install the most recent version.
x

Sequence only has one channel of sound

I have a few sequences that I have added to a master sequence and only have one channel of sound in the master sequence.
In the actual sequence of each sequence that was added I have 2 channels of sound.
What would correct this issue?
Or does cut and paste everything in each sequence into my master sequence work better?
David

re: the decklink comment - that was directed to the thread jacker ... lol.
re: cloned system drives. Updating does not create a clone automatically. It is something you have to do. In the interest of locking the barn door after the paddle has been lost upstream - get a firewire drive as large as your system drive. Download a copy of Carbon Copy Cloner (shareware) and when your system gets working again, Clone the working drive to the firewire drive. This is your insurance when you update the OS, QT and/or any of the FCS pro apps.
Once you have a clone, if your update goes wrong, you can copy the clone back over the bunged installation and be back up and running within an hour or so.
Regarding FCP 6.0.4, perhaps someone archived a version (or you can find it on the FCP updates page). If you use Software update, it will want to install the most recent version.
x

Only getting one channel of audio with mic HELP

I had been using Garageband with the built in mic to do my podcasts. I just got some real gear.
Here is what I got... M Audio USB fast track, MXL V63MBP running on 10.3.9
I am only getting one channel of audio through the mic. I have the settings on the mixer right and I have gone in the sound preferences and made sure it was right.
On the track in garageband, I made sure that the real instrument settings were set to Stereo. I have been messing around with this thing for an HOUR and I am still only getting one channel of audio. I've done everything I've been able to come up with in google and still nothing works. If anyone has any ideas ,that would be swell because I'm beginning to think that the crappy built in mic on my mac is looking really good about now.

You're welcome.
The common confusion is that 'Stereo" means two speakers and "mono" means one. Stereo actually means two different signals going to the two speakers. Since a Mic is a mono input device, you set the track to mono so that the same sound comes out of both speakers. Enjoy --Hang

Computer only plays one channel of audio

I use an HP Sleekbook 14 PC and recently it stopped playing out both channels of audio. I only get one channel. Any easy fixes?

Hello, @festerdude
Welcome to the HP Forums.
It appears you've lost audio. I will try to help you with this.
No Sound from the Speakers (Windows 7)
No Sound from Speakers (Windows 8)
Follow the document for the version of Windows installed on your notebook.
Make sure that you've updated the drivers, use the HP Support Assistant for this.
Please let me know the results and if you run into any issues.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

How to write to one channel of a task with multiple channels? (plus other things...)

So I have a USB-6009 DAQ. It has 12 digital output lines. I want one channel that is "Dev0\line0:10" which represents an address bus in my application. And a second channel "Dev0\line11" which represents a program enable line in my application.
I have tried creating two different tasks and adding one channel to one task and the other channel to the other task. The only task that worked was the task with "Dev0\line0:10". It was always the task containing that channel, regardless of the order of creation. So then I moved on to a different method. (I read somewhere that I should only create one task of each type. like only 1 DO task only 1 AO task etc... However I am also using the two analog ouputs to and have a task for each AO and they work just fine.)
I tried add both channels to one task. But when I needed to control only the address bus, I had to have some information for the other channel as well. This was a little trying, but I could configure it that way. But it turned out to be easier for me to just make one channel with all the lines and OR in the data for line11 with each write.
I just wondered if it was possible to write to one particular channel of a task and not the other channel? That would really be the ideal solution for me. especially if I could write multiple samples to the one channel while I left the other channel alone. Which brings up another complaint... Why does WriteMultiSamplePort only work if I use a DigitalMultiChannelWriter, and not if I use a DigitalSingleChannel writer even though my task only has one channel (and by the way I set up the channel as one channel for all lines)? A perplexing issue to be sure.
And no I can't just load all my samples into an array and write them all at once because I also have to manipulate the two analog outputs in between the various digital writes.
I am using NI DAQmx 7.5 and C#. I am trying to use the DAQ to program a digital switch, which has proven to be a real challenge. In push-pull mode there is too much ringing for the switches programming port to tolerate. But the switches interface is LVTTL, so I needed the 3.3V. When I changed to open-collector I had to use voltage dividers to drop down to 3.3V. But the rise time using open-collector is too slow for me the program the switch in serial mode, so I had to change to parallel. The switch has an 11 bit multi-plexed ADDR/DATA bus. So the DAQ I had chosen to use which had plenty of lines for the serial programming, now is strained to it's absolute limits by the parrallel interface. ARGH. The only output I am not currently using is the counter, and I'm going to need it if I ever want to read back from the switch. But first I have to seperate the ADDR/DATA bus from the CS line on the DIO lines of the DAQ. And I don't know for sure what I'm going to do about the voltage level translation when I have to go bi-directional. Maybe I can filter out the ringing in push-pull mode? Any thoughts on that?

Hi Saikey,
In most cases, you are exactly right: you can only use one task for one type of operation (i.e. only one analog input task in the same program). With the USB 6009, you can have multiple digital output tasks running at the same time. I was able to run a digital output program with two different digital output tasks configured for a USB-6009.
However, you stated that it would be better if you had everything in a single task for your application and write data to only some of the channels. The easiest way to do this is to modify your array of output data so that only the data to that one channel is changing. So, for example, if you keep writing a 0 to the channels that do not need new data nothing will change.
If you have to change your analog outputs during this program, you could create an event structure that would stop and restart the analog output tasks without changing the digital output data. I hope that you find this information helpful.
Regards,
Hal L.

OFM certification question -- partners only ? What's up with that?

1. Please explain why OFM 11 certification is only available to Partners.
The way it reads right now, to simply look at the certification path for Oracle
Fusion Middleware, one has to pay a minimum of $500 to join the Partner Network.
2. It also appears that the certification is intended to certify a company, not an
individual. What's up with that ?
This is especially disturbing because some big Oracle customers, like the US govt,
require individuals to be certified in their basic job function. For those of us
in middleware, that would be an OTN cert.
If I am interpreting this correctly, this means that longtime pros, to keep up with
certification, would have to indenture themselves to a Partner company in order to be
allowed access to the program.

user647684 wrote:
1. Please explain why OFM 11 certification is only available to Partners.
The way it reads right now, to simply look at the certification path for Oracle
Fusion Middleware, one has to pay a minimum of $500 to join the Partner Network.
2. It also appears that the certification is intended to certify a company, not an
individual. What's up with that ?
This is especially disturbing because some big Oracle customers, like the US govt,
require individuals to be certified in their basic job function. For those of us
in middleware, that would be an OTN cert.
If I am interpreting this correctly, this means that longtime pros, to keep up with
certification, would have to indenture themselves to a Partner company in order to be
allowed access to the program.1) The following blog video may help.
2) If this link refers to the certification you were concerned about : http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=391 then I believe this is an Oracle OCS certification open to everyone.
3) Some of the web pages describng OCS certiifcations have Oracle Partnet Network confusingly emphasied on them, this was (is?) a known issue.
Some threads have commented on this in the past and unfortunately I dont have time to search through them to to locate the certification definitively that you are questioning about.
The big emphasis on e the OPN certifcations are because Oracle Partners are required to have a number of people holding OPN Certifications in order to reach the higher partnership levels.
Please be aware this is a rshed explation and not necessarily accurate. A link to the page describing the certification you have located would be useful.
Rgds - bigdelboy.

My (postage stamp icon) mail program will not send outgoing mail - only receives, what's up with that?

My (postage stamp icon) mail program will not send outgoing mail - only receives mail.
Says the outgoing mail server is wrong, but Comcast says it's right - what's up with that?
Is there a way to reload the standard (postage stamp icon) mail program?

Clearly there's something wrong with the configuration. Reverting to some other mail application (whatever the 'standard' one is...) won't help.
What does the Connection Doctor (Mail -> Window -> Connection Doctor) have to say about it?
Chances are your username/password for your SMTP server are incorrect.

I purchased Adobe XI for a year. I am charged monthly on my credit card. The software only allows one print file to pdf after that it has a pop up marketing screen asking me to purchase it again. If I reboot I can get another print out of it. After a

I purchased Adobe XI for a year. I am charged monthly on my credit card. The software only allows one print file to pdf after that it has a pop up marketing screen asking me to purchase it again. If I reboot I can get another print out of it. After an hour of trying to reach somone on tech support I ran across this forum. Any help out there?

In the pop-up screen, have you tried licensing it and signing in? Signing in is crucial, so it knows what you paid for.

I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
Restart phone
Reset phone
Restore in iTunes using a backup
Restore in iTunes as new, without using a backup
If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

My FaceTime is active but it does not connect. Any one know what is wrong with it or how to solve the problem?

My FaceTime is active but it does not connect. Any one know what is wrong with it or how to solve the problem?

Please sign out of FaceTime and sign back in. If there's no change, log out or restart the computer and try again.

I've just found that three movies I've bought from iTunes on on my iPad are not showing up on Apple TV or anywhere other than that iPad. What's up with that and will I lose these films if I reset this iPad?

I've just found that three movies I've bought from iTunes on on my iPad are not showing up on Apple TV or anywhere other than that iPad. What's up with that and will I lose these films if I reset this iPad?

Thanks. The reason this has become an issue is that I recently bought a new Macbook Air that the iPad is not synced to. The one is was synced to was stolen. If I want to sync this iPad to the new Air, won't it be wiped before I'm able to copy these films or am I wrong about that?

How to explain. OK 1st all photos are visible in my iPhoto library; however, some are stored on hard drive and some are stored on external. All can be viewed in itunes, but none on the external will sync to my iPad. What's up with that.

How to explain. OK 1st all photos are visible in my iPhoto library; however, some are stored on hard drive and some are stored on external. All can be marked or unmarked in itunes, but none of the photos stored on the external drive will sync to my iPad. Anybody know what's up with that?

What really cheeses me off here is that Apple isn't allowing users enough customization. With each update of iTunes (and the OS and iOS) we're forced to give up something that worked well for the way we want to use the app and make do with fewer (and lamer) options. If Apple keeps this up, they're going to start losing customers fast. I mean if this isn't fixed soon, I'm pretty sure I'm going to give up on iTunes, and then I'll probably go ahead and get a Galaxy when I need to replace my iPhone.
What I don't understand about how they won't let users delete the list of available podcasts now is why? How is this making it a better program? I can understand that not all users are capable enough to right-click on a feed and select "Show all available episodes", so I can see why they want the complete list to be the default (and, surprise, it already was). But to not give users the option to delete that list? It's inconsiderate because it makes navigating feeds with a large back catalogue really frustrating. I'm flabbergasted that no one at Apple considered all the podcast feeds that keep hundreds of episodes available when they removed this feature. It smacks of rank incompetence.
What improvement were they trying to make here anyway? There was nothing wrong to my mind about how podcasts were managed in previous versions. Whatever improvement they were trying to make here, they should have realized that many users would at least want the option to keep things the way they were.
And reverting to a previous version is no solution. I can't sync my iPhone with the new iOS without this update, and (while I do have some issues--specifically how you can't play podcasts in the Music app anymore) I do like the new iOS.

What to do with that kind of email - comes weekly

Dear Customer,
To update your Apple ID, simply click the link below. That will take you to a web page where you can update your account.
Please note that the link will expire three hours after this email was sent.
https://appleid.apple.com/confirm/OynS-uAtTw6W61X3oKA3PQ
Questions? There are lots of answers on our Apple ID support page >
This is just an update for our data don't worry – your account is still secure and no one has been given access to it.
Thanks,
Apple Customer Support
Copyright © 2014 Apple Inc. All rights reserved
Terms of Use / Privacy Policy / Contact Us
Dear All,
what to do with that kind of email - comes weekly
I had receive several of them ?
I seems not a real Apple email.
I did not klick for the link,
but stepped in from Icloud and checked - it was all right.
What to do?
tnx Iren

THNX - I was wondering on it - OK
Minden jót kívánok / Best regards
Melczer
Melczer Irén
Media & Communication
Spirit of Hungary Imoca Ocean Masters Sailing Project
2014.09.29. dátummal, 9:55 időpontban Apple Support Communities Updates <[email protected]> írta:
You received a reply
Roger Wilmut1 has replied to your question. You can view the full discussionin Apple Support Communities.
what to do with that kind of email - comes weekly
It's a scam - ignore it. Apple probably know about it but you could forward it as an attachment to [email protected] to make sure.
Correct Answer
Helpful Answer
Use the buttons above to tell Roger Wilmut1 and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to Roger Wilmut1, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support
<Edited by Host>

When making a PDF version, the PDF does not show my footer. What's up with that?

Pulling a single page from a book written in Pages, I copy and drop a single page to andother pages document, then from there I export a PDF of that one page document. When the PDF is viewed, there is no header or footer present. What is up with that? I want the doc to look like the original. THX mc

Pages version? Did you have header and footer on in the new document?
You could try using Print (Cmd + P) > Click PDF button > Save as PDF. It worked fine on Snow Leopard with Pages 08 and also with Pages 09

FCP only capturing one channel. what's up with that!?

Similar Messages

Maybe you are looking for