FCP Output speakers Strange sound question

I hope somebody reads this.
I compressed my (2 Separate scenes, different timelines, same settings) footage using compressor, "DVD 90 min Best Quality"
I took that footage and put it in DVDSP, put that on the timeline. Separate both scenes with a chapter marker.
I then built a DVD, I put that DVD in my system, and the 1st scene only plays out of the center speaker and subwoofer, My second scene plays out of all the speakers, (additional speakers are labled "FRONT SPEAKERS" and "SURROUND SPEAKERS" that's they way they are labeled on my Stereo)
It must be some setting, anybody know?
Thanks!

Anybody?

Similar Messages

I receives a strange sound from the speakers whenever my Z3TC boot.

https://www.youtube.com/watch?v=ik4BZPgLc3o&feature=youtu.be
I receives a strange sound from the speakers whenever my Z3TC boot.
after 33 seconds, It sound Tick~Tick~
What is it? Is it same with your?

@keikou
Can't recreate the issue, is or was your tablet locked to a carrier?
settings > about tablet > which software and build number do you have?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Output speakers do not work, have a red light coming out of my headph. jack

My headphone jack works but theres a red light coming out of my headphone jack when its unplugged and my internal speakers will not work...anybody have an idea? Tried system preferences and says no options for selected audio and cant get any sound for my built in output speakers and my volume display in my bar is faded....HELP!

@Spencer
I know this thread was marked answered but thought I should chime in since my MBP (2.66Ghz Late '08, bought May '09) started to exhibit this behavior. I was getting "No Output" greyed out speaker images and the red light coming out from the headphone jack. It's been intermittent but finally wouldn't go away so I figured I'd contact Appe.
This afternoon I called Applecare and was advised to take it to the Apple store... no questions asked, no troubleshooting steps, just told me to take it to the store and even offered to make me an appt. I was able to get an appointment at the genius bar same day (literally 2 hours after I hung up the phone). My wife took a ride with me and we headed down there.
When I showed the technician she tested it and then went to the back room to double check something. When she came back she told me that it was hardware related and needed to be sent in for service. I am under warranty so it was no skin off my back but I will need to be without the machine for a few days.
I agree with Rod to take it in, esp. if you're still under warranty. I should also mention that this only started happening a few weeks ago but the red light part was rather sudden.
Good luck!

Strange sounds - mid 2010 iMac 27'' i7

Hi all,
I have my new iMac for almost a month now and today I started hearing some strange sounds every 5 to 10 minutes. What I hear is something like a rat in the mac scratching its fingers on the aluminium:
chk---chk--chk-chk-chk-chk. It goes like this, one scratch - pause - second scratch - pause and finally four continuous scratches.
I have lowered the volume of the built-in mic and line in with no luck. When the sound is muted I don't get it so it's a sound coming from the speakers for sure.
Any ideas?
Regards

Well,
kinda embarrassed but whatever, someone else might have the same issue.
I'm writing the cause to save him/her from formatting the computer, spend hours on the net searching for strange sounds on iMac, cursing apple etc...
Office 2011.
Outlook.
Sound for "No new messages".
It repeats the sound for each single account.

Cracking strange sound when comming from sleep

When comming from a sleep (not always, but when beeing longer in sleep) I hear (next to the superdrive sound that is normal) a sort of cracking 'strange' sound out of my left/center area just around where the fan is.
It's a sound like you plugin a radio with an headplug let's say. Seems to come out of the speakers, but i'm not sure about that.
Is it normal (didn't do this before, only noticed it now after a month)? Or can i add another point to the list when i'm calling applecare (i really have a very monday morning machine i guess,: cpu whine, display not ok, strage blinking numlock sometimes).
Did find some thinks that look alike:
http://www.macworld.com/forums/ubbthreads/showflat.php?Cat=0&Number=420873&an=0& page=9
http://discussions.apple.com/thread.jspa?messageID=2565669&#2565669

Great description...! I thought it sounded a bit like the trashcan sound.
I have got the same thing which isn't exactly my biggest problem... I also have the situation, that my MB doen't go to sleep, unless I directly tell it to. I thought the sound was related to that problem, but as none of you have mentioned it...?
Also my MB cannot be started normally every now and again and I have to do a PRAM reset to get it running again.
This is my second MB, so I'm slowly running out of patience...
The first one had the RSS, by the way.
MacBook Mac OS X (10.4.7) Wish I had my iBook back...!

Strange sounds from my new iMac

I have these strange sounds going out of my iMac, it's from various apps,
How can I monitor where the sounds come from and for what reason?
I've looked in system preferences -> sound
but nothing were relevant there.
Thanks!

itaykez wrote:
That's exactly my problem. i don't know which app does it.
I can't record it because it's too fast. sounds like wissshhhhhhh and woooaaaaappppp. very quickly come and disappear..
sorry for the poor data but it's the best i can do.
it's brand new but i won't replace it due to a minor bug that obviously can be fixed thanks to guys / girls like U!
No matter how minor it is, you should NOT be troubleshooting a Mac that has a window of 14 days of the purchase date no questions asked return and/or replacement date warranty. What you are saying is you have no problem spending $2000+ on a buggy Mac.
To each its own.

Built in audio output (speakers) are playing through different channels.

My built in audio output (speakers) are playing through different channels. How do I make them both play through the same channel? It has something to do with the audio midi setup. When i click "Configure Speakers" on th Built-In Output I don't get the option of "-" for which channel the audio should go out of, I just get "1" or "2" as an option. This happens when i select them to be both stero and multichannel speakers. Any ideas on how to fix it?

Is there a red light glowing inside the jack? It sounds like a faulty jack. Read this:
http://forums.macrumors.com/archive/index.php/t-232084.html
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

Strange Sounds/Occurrences

So the "Strange Sounds/Occurrences" are coming from two places:
first: the fans. It seems as thought they run quite a bit... do fans on MacBooks usually run so fast, so loud, so long? It seems like they're usually running at over 3000 RPM and often much higher... seems like a bit much to me.
My other question is regarding the disc drive. Whenever I turn on the computer or wake it from sleep, the disc drive (at least I'm pretty darn sure it's the disc drive) makes a bit of noise (same rhythm/sound every time). I just want to check to make sure this is normal. It's also a somewhat noisy drive when it comes to loading discs, burning, erasing, etc. Normal, yes? I hope so!
Any info is appreciated! Thanks!

Nub Cake wrote:
So the "Strange Sounds/Occurrences" are coming from two places:
first: the fans. It seems as thought they run quite a bit... do fans on MacBooks usually run so fast, so loud, so long? It seems like they're usually running at over 3000 RPM and often much higher... seems like a bit much to me.
are you viewing video clips/movies or a video application?
if your video card is working harder then the more heat it will produce, then your fans kick in until the video card is cooled down to the proper temp.
if the fans dont kick in then your card will pretty much melt.
My other question is regarding the disc drive. Whenever I turn on the computer or wake it from sleep, the disc drive (at least I'm pretty darn sure it's the disc drive) makes a bit of noise (same rhythm/sound every time). I just want to check to make sure this is normal. It's also a somewhat noisy drive when it comes to loading discs, burning, erasing, etc. Normal, yes? I hope so!
yes, the sound it makes when coming out of sleep is normal.
the sound when you load a cd/dvd into the laptop is also normal... well at least with the 2 mac laptops that i own.
Any info is appreciated! Thanks!

No sound or strange sounds when trying to record guitar

Hi!
I'm new to Logic Pro, after having worked with garageband for many years. I've just been trying to record guitar through my audio interface, with strange results. I've set my audio in and output source as my M-Audio firewire solo, created an audio track, and selected the guitar sound I want. At first there was no input, then when I deleted the first track and created a new one, I could hear the guitar through the monitor and it was being input, but it had a horrible distorted and out of tune sound - and that was how it sounded when I recorded it too. Then I tried it again and it seemed to be working fine for about 5 minutes - it sounded fine through the headphones and the recording was right - but then went back to the strange sounds again - without me changing anything!
I'm using Logic Pro 9.1.8, on a Macbook Pro running Mac OSX 10.8.3, and have a M-Audio Firewire Solo audio interface.
I'm very frustrated right now - so I'd be grateful for any help!
Thanks,
Stephen

Hi stephenhis,
If you are having issues with imput audio in Logic Pro, the first place to start would be with some basic isolation troubleshooting to see if the issue can be localized. That should provide a good basis for further troublshooting should the issue persist.
Logic Pro 8 and 9: Troubleshooting basics
http://support.apple.com/kb/HT2375
Regards,
- Brenden

Strange sound issue with my Satelite U300

I've got a strange sound problem with my laptop.
I have XP pro + SP3 (downgraded from Vista to XP)
Couple week ago, a reinstall XP, because I thought it could solve my problem. But...nothing.
This is a problem: When I turning my laptop on, it gives me a message, "warning, cannot access volume control". When I check device manager, the only yellow question mark is bout PCI memory controller and there is no more unrecognized devices founded.
In Sound, video and game controller - Realtek High definition Audio is just missing.
Usually , then everything is ok, in "Device manager - Sound, video and game controller " I have - Audio Codecs, Legacy Audio drivers, Legacy Video CApture Devices, Media Control Devices,
Video codecs, Realtek High definition Audio. But then sound is missing, the "Realtek High definition Audio" is also missing.
Computers restart doesn't help. Even, when I uninstall Realtek sound drivers from "Add and remove.." and install it freshly, it also doesn't help. I tried to update drivers - nothing..
But, there is one strange thing: When a turning my laptop on couples hours later, or even next day (for exmpl) everything is ok. Sound works. And I can understand why....
All drivers downloaded from Toshiba. BIOS is being updated.
Maybe somebody know how to solve this problem? Any solutions?

Hello
This issue has been brought up on this forum several times under other topic headings. Look under Audio Driver Missing, for instance. I have had this exact problem since purchasing my Toshiba notebook more than a year ago. Toshiba tech support is useless - and you're right that BIOS updates or changes make no difference, at least so far. The other ideas or replies given so far on this forum also don't solve the problem. Unfortunately for now I think you have to live with it, until someone spends the time to figure out what is really going on. I am curious if it is a Toshiba problem, a Realtek problem, or a Vista / compatibility issue.
I have two suggestions, which aren't fixes, but can help get your sound back when it disappears:
1. Restart several times, not just once. Sometimes it works.
2. Try the System Restore function. This used to work for me, until I updated the BIOS and now it no longer helps with this issue!
Make sure you post a solution if you figure it out!

Strange sound problems with Terminal

I've been having a strange sound issue for a couple months now that's driving me insane. What seems to happen is that when I launch/close Terminal the sound volume seems to change. It usually increases, but sometimes the output device toggles to the internal speaker. It's very strange, very frustrating, and very reproducible.
I have reset PRAM, done an SMC reset, cleared every cache I can think of, reset preferences on Terminal, checked bash-related (profile, bashrc, etc) and nothing seems to help. It does appear that it's iTunes specific - the volume of DVD player doesn't change when I use terminal in a similar way. If I remember correctly, I had the problem before my Leopard upgrade as well. I have the MS intellitype/intellipoint utilities installed for my keyboard/mouse, although I don't know if that matters.
Any idea what could be causing this?
thanks!

I've been having a strange sound issue for a couple months now that's driving me insane. What seems to happen is that when I launch/close Terminal the sound volume seems to change. It usually increases, but sometimes the output device toggles to the internal speaker. It's very strange, very frustrating, and very reproducible.
I have reset PRAM, done an SMC reset, cleared every cache I can think of, reset preferences on Terminal, checked bash-related (profile, bashrc, etc) and nothing seems to help. It does appear that it's iTunes specific - the volume of DVD player doesn't change when I use terminal in a similar way. If I remember correctly, I had the problem before my Leopard upgrade as well. I have the MS intellitype/intellipoint utilities installed for my keyboard/mouse, although I don't know if that matters.
Any idea what could be causing this?
thanks!

Canvas brightness doesn't match FCP output files

After spending hundreds of hours trying to color correct in the FCP canvas only to create output files (MPEG2 for DVDs and MOV files for online stuff) which are either too dark or too light, too saturated or too bland, I finally realized that what I'm seeing in my FCP canvas window does not match - at all - the final, compressed file when I export using Compressor to an avi, an mpeg, or a Quicktime MOV file.
I invested in a good Gretamacbeth screen calibration device (Eye-One Display 2) only to find that the problem is not my monitor or its calibration, but the software.
I can output to a Quicktime file and play the same clip, side-by-side, with the identical clip in FCP, as viewed through the canvas, on the same monitor. Invariably the FCP canvas image is darker, has higher contrast, and shows much richer color saturation. The Quicktime movie is too bright, and too washed-out looking in the colors compared with the FCP canvas. And when I output to an mpeg2 and author a DVD using DVD Studio Pro, and then pop the completed DVD into my Mac (or TV/DVD player) and view it, it always turns out much brighter and more washed out than what my FCP canvas had led me to believe.
To try to compensate for this, I manually brightened my monitor somewhat and re-edited my footage, trying to boost luma and chroma levels as much as I could without exceeding broadcast standard limits, only to find that now some of the resulting DVD was oversaturated and too dark. I REALLY need an accurate canvas on which to edit; it's impossible to create anything worthwhile if I have nothing else to do than to simply guess how every clip is going to look and pray that the final result isn't too far off.
Has anyone else encountered this? It's a real problem for me. I'm using FCP 5.04 on a dual-processor G5 with 5 GB of RAM and a dual-monitor setup - an Apple 17" monitor and an Apple 23" cinematic display.
Any input or ideas would be GREATLY appreciated. Thanks in advance for your help!
Powermac G5 Mac OS X (10.4.3)

Thanks to both of you, Steve and Shane, for your quick replies.
I always render as I go, and I disabled overlays in the canvas long ago. And I realize that calibration is a key issue, especially for web files, and that the view produced in the FCP canvas isn't a full-resolution representation of the underlying digital file.
But when I'm editing my actors' faces and adjusting their colors to get just the right amount of pink rosiness in their cheeks, and carefully setting the right light levels in the background, and then I output my file to any format and view the resulting file on the SAME CRT on which I did my editing, suddenly their faces have lost all their color, and the background is too light and washed out, even though I'm viewing the thing on the same screen I used to edit it.
So no matter how my monitor is calibrated, I believe that any high-quality output file that FCP creates should resemble, at least in terms of color and brightness levels, the image I edited in the canvas moments earlier, at least if viewed on the same screen. I realize that resolution will vary and one might be more blurry or whatever; that's not the problem.
In fact, if I use FCP to create a Quicktime file and an mpeg-2 for a DVD and then view that file on any of my PC monitors and on my television via my DVD player, it looks remarkably consistent. In other words, the output file looks fairly close, in terms of chroma and luma, when viewed either on my Mac (with the Quicktime player), my PC, or even my TV (viewed as a DVD). The only thing that looks different is if I compare this file to the file I edited, as seen on the FCP canvas, where the colors look much richer and the contrast is a lot darker. Even when viewing both files on the same computer screen, one in FCP and the other in Quicktime, the FCP one looks substantially different. Have others run into a similar problem, or is it just me? I can't believe professional editors have to resort to always guessing whether what they see in the canvas will look anything like their final FCP output, at least if they're viewing it on the same monitor.
So I guess I'm really wondering whether there's some way to independently adjust the visible chroma and luma levels in the canvas itself, to configure them properly, so that what I see when I'm editing will more closely match the files I generate when I'm done, when viewing them both on the same screen.
Thanks again for any light (or contrast!) you can shine on this problem.

Strange sound on retina macbook pro

This has happend twice now. It first happend a few weeks ago and then tonight. I got into the desktop and went to open a browser and there was the strange sound that almost sounded like an quiz show buzzer when you get the answer wrong. It is a deep buzz type sound. Anyone know what it could be? Any help would be appreciated.

Your not the first, take the machine back for a test.
Buy AppleCare, buy a couple of external hard drives, make backups
Most commonly used backup methods
thanks for the love.

Strange sound - muvo n

Hi.
my problem: during listening the music i hear in background very iritating and strange sound (kind of crack like in out of tune radio)any solutions ?

Try formatting the player, and loading a firmware update. Then load some new content (music) onto it. Also, if you have another set of headphones to try, that would be best, to make sure that isn't causing the problem.
Cat

Macbook pro late 2013, strange sound when booting

My 3 days old macbook pro keeps strange sound when booting, it lasts like one second, and it reminds me of a cd drive trying to read cd, but here's no even the cd drive. what could be going on inside my mac, and should i take this to repair? the sound only comes when booting, not after boot, or when using.

You can return a new Mac within 14 days of purchase.
A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best.

FCP Output speakers Strange sound question

Similar Messages

Maybe you are looking for