FCP plays DVCPro HD - QuickTime does not - Driving me mad – please help-.

Hello
This is a follow on from a previous post. Trying to get DVCPro HD QuickTime file to playback on a MAC Mini. The file opens but the image is white and I occasionally get a dialog box informing me that a QuickTime component is missing.
I have installed Final Cut Pro on to this MAC
I have downloaded and installed the DVCPROHD components software from apple.
From FCP I can do a custom export (File Export QuickTime Conversion) for DVCPro HD but the same option isn’t available if I try and do a custom export from QuickTime.
I have done the same install on a G5 and all is well. Is it the Intel – Mac Mini that is causing the problem? Both MACs have 10.4.8 installed so I don’t think it’s a system thing.
?????..any advise is greatly appreciated.
Sincerely
D

you answered yourself, give you the green star,
http://forums.creativecow.net/cgi-bin/newreadpost.cgi?forumid=8&postid=914678&pview=t#head

Similar Messages

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies!

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

On my ipod touch my songs start in random places and jump to different places as it plays, the remember position is not ticked can anyone please help?

On my ipod touch my songs start in random places and jump to different places as it plays, the remember position is not ticked can anyone please help?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

When I connect the iphone does not start automatically Itunes Please help me

when I connect the iphone does not start automatically Itunes
Please help me
How to solve this problem that I have

i've had a few issues like this.
I've found that it is an issue with items that are already on your phone.
several troubleshoots.
1) uncheck everything from syncing (apps, music, tv shows, movies, podcasts, etc), try to perform a sync, it most likely will work. Then, sync after checking each item individually (check the sync box for videos, then sync, check the sync box for podcasts, then sync, check the sync box for music, then sync, etc). One of two things will happen, 1) you will fix the problem, or 2) you will identify exactly what part of the sync setup is the culprit.
2) if the above doesn't work, I've found that it is likely an issue with files that are on your phone but your phone doesn't exaclty recognize (for example, I had copies of music on my phone that didn't show up in the music app, I went in on itunes and manually deleted those songs from my phone and that fixed the sync). to do this, check the "manually manage music and videos" box at the bottom of "summary" while your phone is connected to itunes. Then, go to the left hand pane in itunes and find your iphone device, click the drop-down arrow that shows all the categories for media on your iphone. Go to the music category in your iphone on itunes and delete all the music that shows up. Try to perform a sync - it likely will work. After this, you can uncheck the manually manage music box and re-sync your phone as normal
let me know if either works

My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?

My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?

Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Try a reset:
- Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
If issue persists try:
- Another known working cable
- Check the charging port for any damage or debris
- You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

Audio recording on a flash. recommended to download vlc media player did this. tried to play messages says quicktime does not recognise this format. what to do pleaser

RECIEVED AN AUDIO RECORDING ON A FLASH. PLUGGED IT IN. DOWNLOADED VLC MEDIA PLAYER AS RECOMMEMDED. TRIED TO PLAY.
MESSAGE RECEIVED SAYING QUICKTIME DOES NOT RECOGNISE THIS FORMAT. WHAT TO DO PLEASE.

You could add Perian. It may help (...or not).
Wait, you received and audio recording and you are trying to use a video player (vlc) to play it? What kind of file is it? Does it have a filename extension? If it is .wmv then you might want to install Flip4Mac. Then you could play it with QuickTime.

TS3899 My email keeps telling me the message failed because the server does not allow relaying. Please help

My e mail keeps coming back with a message saying failed because the server does not allow relaying. Please help

Check the suggestions at this website. They may help you get email working all the time.
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/

I have lost all of my bookmarks from the drop-down menu. It says it is empty, but never have I deleted them. And when I bookmark a page it does not save it. Please help

Question
I have lost all of my bookmarks from the drop-down menu. It says it is empty, but never have I deleted them. And when I bookmark a page it does not save it. Please help

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

TA27749 6th generation ipod nano does not charge in car - Please help!!!!!

I have a 07 BMW 5 series and a 6th generation ipod nano. The ipod plays fine through the car but it does not charge. The ipod I used previously was able to play and charge. Is there a way that I can get the new ipod to charge?
Please help!

See this Apple support document for help and instructions on disabling VoiceOver on your Nano.
http://support.apple.com/kb/HT4317
B-rock

REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
Feroz

The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun

OSX 10.5 Does not Recognize Login Password- Please Help!! This is insane!!

Ok, so this problem is incredibly annoying and has got me perplexed. I recently re-installed Mac OSX 10.5 for various reasons.I am running a Macbook Pro that is 2 years old apprx. I did the following steps:
1. Booted from Install DVD (authentic)
2. Erased/zeroed out HDD
3. Installed OSX 10.5 on the Drive. And OSX is the only OS on the computer.
4. I went through the set up, and created a login name and password. The password is long, like around 30 characters. This is the same password I had used before, on the same OSX 10.5 from the same disk with absolutely no problem.
5. I slowly typed each character, having wrote each character down and did it for both pass and verification boxes on the initial screen when you boot for the first time and set up the user account.
6. This was all accepted, and I finished the process.
Now here is the rub, the password does not work! It logs in to my user name automatically using, I assume, the password I gave. But when I go to install my programs again, and it asks for the system password, it tells me the password is incorrect. I type it out completely and correctly off the piece of paper, and it says it is not correct. I have now retyped it 15 times, so there is no chance of it being a typing error (and same thing after re-re-install). ***!! I just put it in, what other passwords could it be!! I even erased the entire HDD clean a second time, and re-re-installed the OS and repeated the above. Still the same problem.
Can someone give me any idea what might cause this? I have tried everything I can think of, and cannot think of any cause.
Thanks everyone,
DpDimick
Message was edited by: DpDimick

Thanks again V.K. I did check the layout, and it was listed as alphabet when I inputted the password. So that doesn't seems to the the issue.
Just finished a truly mystifying experiment, but I put in a shorter password in the way mentioned earlier and it worked. I then systematically kept increasing the characters of that password and it seems that if the password starts to exceed about 16, it stops recognizing it. I am fairly sure it is not the password itself since it never gives an error when typing in the verification password. So unless I systematically make the exact mistake twice at the setup screen, and then don't or make a different mistake every time at the login screen, I don't think its my typing skill.
So problem solved for now, but I am still a bit worried. Maybe I should completely reinstall and use a shorter password.
Is there supposed to be a length limit?

My Creative Fatality Headset, the microphone does not work!! please help

Hi..
I just received my Creative Fatality Gaming Headset last night, it's not the USB, so it's the straight plug in..And my microphone does not seem to be working, it is detected by my computer as "working" but I can't hear $hit to tell you the truth..I called Tech service a couple times and it was , i notice that a lot of people seem to be sharing the same issue, any help? It would be awesome to get my microphone working. Thanks

Hey mate.
Could you please say what soundcard you're using?

ITunes does not work. very sudden. please help...

When i open my iTunes i just get the "beach ball of death" straight away. As a result i am listening to my music via "open with" -> "Quicktime"....not as elegant
Can anybody help me out on this one?
Thanks! ...i would love to be able to use iTunes again.
(Apple, take note, this means one less person purchasing from your store)

I'd suggest that the first thing to try is Repairing Permissions.
~~HangTime [♪♫ The Bullets and Bones Band ♫♪] B-)>

FCP plays DVCPro HD - QuickTime does not - Driving me mad – please help-.

Similar Messages

Maybe you are looking for