FCP Pro Keyboard number keypad not working with Macbook Pro

Switching over to a macbook pro I find my Pro Keyboard number pad has stop working, infact if I try to use it it crashs my computer
any help?

maharitho wrote:
have you tried to repair your permission, and restart mac maybe it works
Kinda hard to do that if the keyboard and trackpad isn't working - don't you agree?
In any event - what were you doing last before your keyboard and trackpad stopped functioning?
Did you do any upgrades to your Macbook?
Have you tried doing a PRAM/NVRAM or SMC reset?

Similar Messages

Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

Ahmed
Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
Pattie

External Monitor Not Working With Macbook Pro

My computer was working fine with an external monitor, then my computer froze, and I had to hold down the power button. When I turned it back on, my computer would not work with an external monitor. I've tried different cables, so it's not the cable. The monitor is being detected by the computer, but nothing is showen on the external monitor. When connecting the monitor to the computer, the computer's screen goes blue, then turns back to normal. I
I cannot reset the SMC by removing the battery, I do not have the confidence to remove my battery, and do not have the time to send the computer to someone else to do it.
I also tried updating my OS from 10.7.4 (Might've been 10.7.3) to 10.7.5.
My computer is a MacBook Pro (13-inch, Mid 2010), running OS X 10.7.5 Lion.
I need to get this problem fixed ASAP, any help is appreciated.
Kind Regards,
Sergee237

I forgot to mention, I'm connecting the monitor via MiniDisplay -> HDMI. I've also tried USB -> HDMI and USB -> DVI -> HDMI but none of them seem to work.

External isight not working with Macbook Pro early 2008

My external isight is not working with my Macbook Pro early 2008 (2.4 GHz, Intel Core 2 Duo, 6 GB RAM, OSX Lion). It goes warm when plugged into the firewire port but is not recognized in system prefs (lists as "unknown device" and also does not turn on (green light. I tried resetting PRAM and all the other stuff as suggested here but no luck. It used to work fine on a 1st generation Macbook and I remember that one of the first times I tried it with this machine here it turned on for a few secs (green light) but then it just simply stopped.
Unfortunately, I have no other firewire device to check the port.
Any ideas, dear community?

Our (old) external Firewire iSights can be sensitive to dust, shock, vibration, humidity, and other environmental factors in storage. (I store my spare in its original plastic shipping case with a new desiccant pack on a solid shelf - never in a desk drawer or other container that moves.)
You have tried several good things and may be finding that your old iSight needs work.
Here are the alternatives I can offer. Consider any you have not tried in any order you like:
(1) You can try Apple's suggestions from http://support.apple.com/kb/HT2090
Test in more than one user account and with more than one Apple softwre application.
(2) My expanded suggestions here: http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
(3) Reset Firewire ports using the info from this old archived Apple article: http://web.archive.org/web/20090331211534/http://support.apple.com/kb/HT1317
(4) If you have no local Apple Authorized service Provider who can help you, other service options are here: http://www.apple.com/support/isight/service/
(5) Consider a new USB cam with current warranty such as one of these: http://www.mac-compatible-web-cam.com/
Message was edited by: EZ Jim

External Display not working with MacBook Pro 13" (early 2011)

I just bought the current MacBook Pro 13" (i7 processor). My external display (Benq 20"W, 1600x1050) always says "No Signal Detected!". I've tried it with a DVI-Adapter (Griffin Video Display Converter) and with a VGA-Adapter (LMP Mini DisplayPort-VGA-Adapter). With lower resolution I once got a picture (but with weird lines). On my old MacBook (white, 2.16 Ghz) there was never a problem with this display (also OS X 10.6.6). Who can help?

Check this post if you want more info:
http://discussions.apple.com/thread.jspa?threadID=2774718
The gist is that DVI is currently very iffy through Thunderbolt. Mini display -> mini display OR mini display -> HDMI should work fine. It's most likely not your adapter itself but the fact that it's DVI.
If you can, get a mini display -> HDMI adapter and try that (assuming your external has HDMI).
I should hear back tomorrow or Monday from apple engineers with more specific info about this issue and I will update then.
BTW- DVI anywhere in the chain will make things fail. Mini Display -> DVI and a DVI/HDMI cable won't work with any reliability (I've tested it on three completely different monitors).

Thunderbolt 2 external hard drive not working with Macbook Pro (early 2011)

Hi,
I'm new to this forum and I hope you guys can help me with this:
I've recently bought an external hard drive that works on Thunderbolt 2 (LaCie d2 3TB). When I connect the new drive to my Macbook Pro through the thunderbolt port, the drive isn't recognized. However, the drive works fine through a USB connection.
I thought that Thunderbolt and Thunderbolt 2 are compatible, however this doesn't seem to be the case. Maybe it's because the OS X / driver / firmware version that I'm working on that is not updated? I work on an early 2011 Macbook Pro: OS X Version 10.6.8 (Snow Leopard).
Thank you very much for your help!
Daniel

Hi danielsh6,
I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
Thunderbolt Firmware Update v1.0
Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
Hope this helped!
Forest

Old MagSafe Airline Adapter not working with MacBook Pro Retina

I've got an old MagSafe Airline Adapter (one I bought when it first came out) that I'm trying to use with my MacBook Pro Retina (using a MagSafe to MagSafe 2 Converter). Sometimes the light is green, sometimes it is off, sometimes the battery icon in the menu bar shows plugged in, sometimes not, but in any combination, the machine is not maintaining charge; the battery discharges at a normal rate for just being on battery. For giggles, I borrowed my seatmate's year-or-two-old MagSafe adapter (the one with the right-angle plug) and plugged it into my machine (also using the MagSafe to MagSafe 2 converter). The light on that one turns orange, and though the battery icon shows "Not Charging", the battery is maintaining charge with the newer adapter. (My adapter, BTW, is able to maintain the charge on her 13" MacBook Pro.)
Was there a change to recent versions of this adapter to make the new ones work with the Retina MacBooks where the old one will not?

the green light on the mag safe turns on?
you should reduce your usage to a very minimal amount as I'm sure the airline doesn't output a strong enough signal for you to be running full screen films with high res. Maybe you should close your macbook P and see if it is charged after a little while of not using it.
turn your screen lights down, turn the sound gHZ down, quit all the downloadin'.
if you must run flash make sure you have the latest version (from the adobe site).
You're computer is intense and if you use it more then it's gaining, of course it going to be draining .
But this is probably moot since you're probably on said plane now. or was.
I'd imagine if you're not satisfied with the product you should return it detailing your situation.

Samsung LED Monitor TA950 not working with Macbook pro

I bought a Samsung TA950 Full HD LED 3D 27 inch monitor and trying to connect my MBP (early-mid 2009, does not support, MiniPort Audio). Connecting using MDP-DVI to HDMI to connect and MBP detects the monitor, I can see and change Display preferences. The monitor only flashes "no signal" when I disconnect the cables so something is happening...every so often my macbook pro display "flashes" momentarily as if it is recognizing a connection but a)nothing shows up in the display prefs after clicking "detect display" and b) nothing shows up on the external monitor. The monitor did worked and showed the MBP screen when I disconnect the cable, set the MBP display resolution to 1152 by 720, than connect the Miniport cable, the monitors flickers and shows the screen, and after a minute or 2, it goes black and goes in the loop of flickering and trying to detect the monitor

Hi, I got the same monitor the other day and there should be no problem getting it to work.
Use the DP to mini-DP cable supplied with the monitor.
Make sure this cable is plugged into the correct input DP port in the back of the monitor (not the DP port for daisychaining).
Make sure the DP input is selected in the inputs menu on screen.
Plug mini-DP end of the cable into Mac
Should work ...

Hitachi X500 external hard drive not working with MacBook Pro

I purchased a new Hitachi X500 500GB external USB hard drive today and when I plug it into my MacBook Pro the drive makes a clicking noise and never mounts. When I try it on my wives MacBook it boots up fine. I bought one early in the day and the same thing happened, so I returned it and got a new one and the same thing happens. Any thoughts?
Looks like it's formatted with Fat32 when I look at it on the MacBook.
Thanks

Welcome to Apple Discussions!
Does the external drive have it's own power brick? If not, it's bus-powered and may not be getting enough juice to run.
Also try all the USB ports on your MBP. Although they are "supposed" to be producing the same amount of power, posts around here suggest that's not always the case.
If the drive does not have a power brick, you can get an inexpensive powered USB hub (it has a power brick) like this one:
http://eshop.macsales.com/item/Belkin/F5U403P/
Adding a powered hub fixes problems with bus-powered USb external drives about 95% of the time.

Rocketfish adapter not working with MacBook Pro 13 inch

I have a rocketfish HDMI to mini displayport adapter. I have tried to connect it to a 22 inch monitor and a 50 inch TV as an extended monitor but the MacBook does not recognize the extended display.
Any ideas on how to resolve or is the adapter not supported?

Check this post if you want more info:
http://discussions.apple.com/thread.jspa?threadID=2774718
The gist is that DVI is currently very iffy through Thunderbolt. Mini display -> mini display OR mini display -> HDMI should work fine. It's most likely not your adapter itself but the fact that it's DVI.
If you can, get a mini display -> HDMI adapter and try that (assuming your external has HDMI).
I should hear back tomorrow or Monday from apple engineers with more specific info about this issue and I will update then.
BTW- DVI anywhere in the chain will make things fail. Mini Display -> DVI and a DVI/HDMI cable won't work with any reliability (I've tested it on three completely different monitors).

De-interlace Filter not working with MacBook Pro

Anyone know about or experience anything similar? Ever since I started using FCP HD on my new MacBook Pro the Flicker and De-Interlace Filters cause severe video defects in the clip that I apply them to. Perhaps something to do with Intel chip? Any help would be well appreciated.

i just put a flicker and deinterlace filter on some test clips and they look fine
what codec are your clips? what codec is your sequence? what other hardware are you using? how are you monitoring the video? can you be more specific about the nature and symptoms of the problem? are you using FCP 5.1.1?

Plantronics 655 bluetooth headset not working with macbook pro

Anyone had problems getting their macbook pro to recognise the plantronics 655 bluetooth headset ?
Doesn't show up when the macbook pro searches for bluetooth devices.

No help here.... having the same issue with my Pantronics 975.

Midi keyboard key A2 not working with Logic Pro 8

Hello
I was using an m-audio keyrig 49 for a good 3 months, when all of a sudden the A2 key stopped working properly. The transport bar in logic shows that midi data is being received when I press A2, however there is no velocity value. The key only makes a sound when I'm going from another key to it, and even when that happens there is a sustain effect on the note, which aren't on any other keys.
I have tested this on midi keyboards from m-audio, novation, and edirol... keyboards that require drivers and keyboards that don't require drivers.
Any ideas?

Try redefining the key commands. Sometimes they can be a little flaky when importing earlier key commands. Redefining them might "unstick" them...

Canon scanner not working with MacBook Pro.

I wonder if anyone is able to help. I recently bought a Canon MG5550 Printer/Scanner and I am having trouble with scanning. When I press the scan button on the printer nothing happens, not evening a warning message. I have tried using a cable and this hasn't improved the sitation. When I go onto Preview, I can select "Import from Canon MG5550 Series" under "File" but I get a message saying that the software for this device hasn't been downloaded, even though it has. I notice that on this page the MG5550 isn't recognised, and I wonder id this could explain the sitation http://support.apple.com/kb/HT3669?viewlocale=en_US&locale=en_US#canon-inkjet. Anyone know any way around this?
Thanks in advance!
Will

I had the same problem and just downloaded this http://www.canon.nl/Support/Consumer_Products/products/Fax__Multifunctionals/Ink Jet/PIXMA_MG_series/PIXMA_MG5550.aspx?DLtcmuri=tcm:16-1082112&page=2&type=downlo ad
it works now!
good luck!

USB superdrive not working with Mac Pro

Is there a trick to getting a USB Superdrive working with a Macpro?
The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
Any pointers in the right direction would be much appreciated.

I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to to "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
Try going to; System Preferences/ CDs & DVDs
Change these two settings to this:
When you insert a blank CD: Ask what to do
When you insert a blank DVD: Ask what to do
NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
And
Then go to Finder Preferences
Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
Try to burn the DVD again (reload Disc- perhaps restart) and try again.
Don't know how these setting changed but they did. It worked for me.
Message was edited by: pj176

FCP Pro Keyboard number keypad not working with Macbook Pro

Similar Messages

Maybe you are looking for