FCP Project closes and Compressor only gives black render
hi
apologies if this has been covered, my extensive search of about 10 seconds found nothing.
Recently on certain projects when i try to export via compressor two things happen. Firstly the rendered file is made up of black only, audio is fine though. And secondly the fcp project closes itself, leaving only the temp project open, that creates itself when you export via compressor. The one sequence in this temp project is the one i want to export and it plays fine in the timeline. Of course this is annoying since the project closes itself without asking if you want to save.
I do have some odd footage in the project. It came from some dodgy video camera device, but I had converted them to dv specs. Mind you none of these clips are in the sequence in question.
any ideas anyone
thanks
adam
exporting to compressor directly from FCP will re-process all your rendered material, so if your sequence has lots of filters, generators, stills or non-native clips, this can greatly add to the time it takes.
Also, exporting video for iPod most likely involves changing the frame size and frame rate, and possibly pixel aspect ratio (are those files square pixel?) Depending on the frame Controls settings for the preset you are using, this can make it take a lot longer.
Similar Messages
-
IPhoto 9.4 sliders for shadows: and highlights: only give black page. can anyone help?
iPhoto 9.4 sliders for shadows: and highlights: only give black page. can anyone help?
While we all have MacBooks in this forum not all of us use iPhoto. There's an iPhoto Support Community where everybody uses iPhoto. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/iphoto
-
I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened with the window full screen it immediately closes and will only work with window smaller than maximum. Driving me mad! Any help please!!
Hi Linc
Thank you for your response.
I'm a bit of an amateur so I hope below is the information you've asked for:
Step 1
23/11/2014 09:19:14.007 ReportCrash[294]: Saved crash report for Finder[4349] version 10.10.1 (10.10.1) to /Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091914_BBBB-MacBoo k-Pro-2.crash
23/11/2014 09:19:14.008 ReportCrash[294]: Removing excessive log: file:///Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091840_BBBB -MacBook-Pro-2.crash
23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x103809000): p=4357[Finder] final status 0x3000a00, denying page sending SIGKILL
23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: process 4357[Finder]: rejecting invalid page at address 0x103809000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder[4357]) Binary is improperly signed.
23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder) Service only ran for 0 seconds. Pushing respawn out by 1 seconds.
23/11/2014 09:19:15.584 Finder[4359]: assertion failed: 14B25: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x10bfbf000): p=4359[Finder] final status 0x3000a00, denying page sending SIGKILL
23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: process 4359[Finder]: rejecting invalid page at address 0x10bfbf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
Step 2
Process: Finder [4626]
Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier: com.apple.finder
Build Info: Finder_FE-932001003000000~1
Responsible: Finder [4626]
PlugIn Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
PlugIn Identifier: com.apple.finder
-0 sec CODE SIGNING: cs_invalid_page(0x10c9a5000): p=4626[Finder] final status 0x3000a00, denying page sending SIGKILL
-0 sec CODE SIGNING: process 4626[Finder]: rejecting invalid page at address 0x10c9a5000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-2 sec CODE SIGNING: cs_invalid_page(0x10c5b3000): p=4624[Finder] final status 0x3000a00, denying page sending SIGKILL
-2 sec CODE SIGNING: process 4624[Finder]: rejecting invalid page at address 0x10c5b3000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-3 sec CODE SIGNING: cs_invalid_page(0x10f4bd000): p=4622[Finder] final status 0x3000a00, denying page sending SIGKILL
-3 sec CODE SIGNING: process 4622[Finder]: rejecting invalid page at address 0x10f4bd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-5 sec CODE SIGNING: cs_invalid_page(0x105ecf000): p=4620[Finder] final status 0x3000a00, denying page sending SIGKILL
-5 sec CODE SIGNING: process 4620[Finder]: rejecting invalid page at address 0x105ecf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-7 sec CODE SIGNING: cs_invalid_page(0x1012cd000): p=4617[Finder] final status 0x3000a00, denying page sending SIGKILL
-7 sec CODE SIGNING: process 4617[Finder]: rejecting invalid page at address 0x1012cd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
--> __TEXT 000000010c966000-000000010ce55000 [ 5052K] r-x/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
__DATA 000000010ce55000-000000010cf53000 [ 1016K] rw-/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
0 com.apple.finder 0x000000010c9a521f 0x10c966000 + 258591
10 com.apple.finder 0x000000010c9977b5 0x10c966000 + 202677
11 com.apple.finder 0x000000010c988154 0x10c966000 + 139604
12 com.apple.finder 0x000000010c987e15 0x10c966000 + 138773
13 com.apple.finder 0x000000010c987d35 0x10c966000 + 138549
14 com.apple.finder 0x000000010c987cfd 0x10c966000 + 138493
28 com.apple.finder 0x000000010c96b960 0x10c966000 + 22880
1 com.apple.finder 0x000000010c98a69d 0x10c966000 + 149149
2 com.apple.finder 0x000000010c98aba7 0x10c966000 + 150439
3 com.apple.finder 0x000000010c9795d2 0x10c966000 + 79314
4 com.apple.finder 0x000000010c98aa0b 0x10c966000 + 150027
5 com.apple.finder 0x000000010c98a952 0x10c966000 + 149842
6 com.apple.finder 0x000000010c98a78a 0x10c966000 + 149386
7 com.apple.finder 0x000000010c979496 0x10c966000 + 78998
8 com.apple.finder 0x000000010c98a548 0x10c966000 + 148808
9 com.apple.finder 0x000000010c98a410 0x10c966000 + 148496
10 com.apple.finder 0x000000010c983df6 0x10c966000 + 122358
0x10c966000 - 0x10ce54ffb com.apple.finder (10.10.1 - 10.10.1) <33C3024A-4A16-3485-B2B1-89FA33B9558A> /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Many thanks
David -
i purchased a app and paid for it Djay the original now i want to put it on my ipad from my phone purchase and it only gives me djay 2 to buy in the app store i dont want djay 2 i want the one i have paid for Djay 1. cant find it anywhere on the store
Developers control which versions of their app is in the store. If a developer releases a new version and pulls the old version then it will no longer be available in the store.
If you sync the device that has the older app in ITunes on your computer and choose to transfer purchases, you will then have your own saved copy of the app. Then, sync the other device and select to install that app from the list of locally saved purchases. -
FCS is only deleting my FCP project file and not linked assets. please help.
When deleting a FCP project from FCS it does not give me the option to delete all linked media. It only deletes the FCP project file leaving me to delete all related media manually. In the user guide it says it should give me the option to delete the project and all files automatically but this doesn't happen on our system. Does anyone know why? and how to turn this function on?
A bug that will never be fixed. You have to delete the associated assets manually.
-
Aperture, iPhoto, Mail, FCP X, Motion and Compressor suddenly kaput!
Yesterday I discovered that Aperture and iPhoto, which I hadn't used for several weeks, were refusing to open and throwing up an error message saying there was a "problem and they probably weren't compatible with this version of the operating system etc."
Shortly after, I discovered that Mail and the latest versions of FCP X, Compressor and Motion were also disabled.
After searching the internet/forums it appeared that this problem (with Aperture) could be caused by installing FCE 4, which I had done a week earlier and the only cure was to reinstall the OS.
I deleted FCE 4 and went through all the usual troubleshooting strategies to no avail so I reinstalled OS X 10.8.5 which which took less than an hour and luckily appears to have cured the problem. (I had been dreading reinstalling the OS as I mistakenly assumed it would wipe all the apps and folders off my Mac ......... but of course it didn't.)
So has anyone had a similar experience or can shed any light on this?
Now I have to decide whether I dare reinstall FCE 4 ...........Quite a few bug fixes, like the text position bug in Lion has been fixed.
Here's some from Tim Payton on the COW
- During Playback, zooming the timeline with the keyboard doesn't send you to the end of the timeline
- Scale controls on timeline now update live
- Synchronize Clips now works if you have multiple non overlapping video clips for a single audio clip. (huge!)
- Preroll and Post Roll settings in preferences work.
- HDV Footage with "better performance" doesn't look nearly as bad. Way less flashing.
- Timeline feels much snappier.
- Timeline index now includes sortable columns: name, roles, & notes, and you can edit the values! (huge!)
- Zooming on the timeline now really centers on the playhead if skimming off, skimmer if skimming on
- Inspector updates more consistently to the clip selected.
- Startup is much faster. -
Selecting and copying only the black and gray of picture
Hi everyone,
Looking for some help. I am a Paramedic Instructor and want to clean up some heart rhythms to make them more neat and presentable for use during class. Below is the sort of image I would be working with.
What I would like to do is remove only the black and gray lines (when they print out of the EKG machine some lines have some gray in them) and place them on a neater cleaner background as below
(The image above I found on a website where the creator has 100's of EKGs that this has been done with, but have been unable to get him to tell me how it was done)
Im hoping someone will be able to figure out how this can be done and lend me some help. Also let me know if another Adobe product would be more useful in this situation.
**I have CS6 Master Collection so you know what programs I have available to use**
Warm regards,
Bryan
Flight Paramedic/Instructor, MarylandHi Bryan,
You can probably remove most of the red lines using some method in Photoshop, like Channel Mixer Adjustment Layer (set to Monochrome) or Black & White Adjustment Layer adjusting the Red slider. Then you may have to use Levels (or Dodge Tool) to make the remaining red lines (now light gray) turn white.
Once you have a BW EKG trace with no red, you can put it on a layer above a clean graph and set its Blend Mode to Multiply. -
Photosmart C6280 Can't bypass the warnings and print only in black
I have a photosmart C6280 printer and i want to print in black only, but i can not bypass the "low ink" errors and "expired cartridge" errors to proceed. I've changed the preferences in my print options to black only but the printer is still flashing "low ink" or "expired cartridge". The black ink cartridge is full and in date btw. I'm afraid of going to buy new colored ink and it still not work, then I'm out of pocket a lot of money and stuck with colored ink cartridges I can't use or return. I've uninstalled and reinstalled the program...still nothing. I'm beyond frustrated.
Hi @hatfieldnomore,
I see by your post that you replaced the black cartridge and aren't able to continue printing. You are unable to bypass the "low ink" errors and "expired cartridge" errors to proceed. I can help you.
The printer can operate only for a short period of time with ‘out of ink’ cartridges. All cartridges must be installed for the printer to operate and they must have sufficient ink for servicing, in order to prevent the printhead from drying out.
I have provided a document for Printing with Depleted Cartridges.
This is for the error 'Ink expiration near' Message Displays on the All-in-One.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
I want to reinstall Acrobat XI standard in English. I am in Costa Rica and get a message that only Spanish is available. English is not. How do I download to reinstall in English??
Select a Store
-
How do I get past the Rescuse email screen? I've been on it over 25 minutes now and it won't let me go forward
Ja... auf alle mögliche Art und Weise... auch mit Hilfe vom Telefon-Support...
Am Ende hat jetzt doch nur geholfen, dass mir meine Kollegin ihr MacBook geliehen hat - darauf konnte ich mein iPhone wiederherstellen - das seltsame ist nur .- ich hab dann auch gleich mein iPad auf iOS 7 akutalisiert (wo ich den Hilfsrechner schonmal da hab *ggg*) - hab's aber erst mit meinem Windows Vista probiert - DA hat es einwandfrei funktioniert... vielleicht war das Update für's iPad (immerhin knapp 20 MB weniger) grad noch klein genug für meine alte, lahme Windows-Gurke? Oder das MacBook nebendran hat es eingeschüchtert?
Keine Ahnung! Werde mir demnächst ein Apple-PC kaufen - das war eh geplant...
Trotzdem Danke an alle, die mir helfen wollten!
LG
Lörchen -
How do I print emails and webpages only in black? I don't want to print in color.
HP Officejet 8500A Plus, Windows 7 64 bit.
How do I STOP the All-in-one from printing in color when printing emails or web pages?
Chromdom
This question was solved.
View Solution.Thank you. I can now save my color cartridges.
Chromdom -
Help with FCPX and Compressor updates
So compressor automatically updated from 4.0 to 4.1 and is now not working and im also having issues with the 10.0 to 10.1 FCPX update. Please check out the link to my other post below for more details.
https://discussions.apple.com/message/24968191#2496819.OK found projects, didnt realize they got moved to the events library from down by the timeline. Still waiting to see if Compressor 4.1 works with FCPX 10.1 update. Looks promising though. My computer automatically updated Compressor to 4.1 without me knowing (obviously when I opened it I noticed) but when it was failing I was still trying to compress with FCP 10.0 and Compressor 4.1 so maybe that was the issue.
-
Importing a FCP project into FCE?
I'll try to import a FCP 7.0.2 project based on DVCPRO50 mediafiles.... into FCE 4.0.1. It will not open (of course), but is it because of not supporting the codec, or is it generally not possible to open a Pro project in Express (dependent on the material)...?!?
Any tips or tricks? Can the FCP project be saved or converted in a way that FCE will read?Unfortunately you can't open FCP project files in FCE, only the other way around. Even if the codec was supported (which it's not), it wouldn't be possible.
If you need to edit in FCE you could always export from FCP as a Quicktime Movie in a codec that FCE does support: namely DV-NTSC or AIC. -
Officejet 7410xi scans only fully black
my officejet 7410xi scans and copies only fully black. The light comes on and passes under the original but I only get a full black page for scans and copies. There must be a problem with the electric eye that reads the original.
The document here might help resolve issues with your Officejet 7410 scanning and copying only in black.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together
You have a hardware problem and you should take it into a apple store to be looked at and fixed.
Maybe you are looking for
-
hello Gurus, When we are maintaing delivery schedule with ME38 t code there is a button fixed which can be ticked or unticked please let me know the use of this. I have already seen F1 Help documentation helpful answers will be rewarded regards sures
-
I've used Mac OS for a very long time now and am at the least an intermediate user both in hardware and software but this is perplexing. For whatever reason, whenever a Finder window is opened (disk image just mounted, clicked the Finder icon, opened
-
SAVE TEXT not updating the database for Recipe Operation Long Texts
Hi, We are trying to update the Recipe Operation long text using the FM SAVE_TEXT. The FM is not throwing any error, but the changes are not reflecting in the database. Text ID: PLPO Text Object: ROUTING Language: EN Text Name: Concatenated string of
-
I Was wondering how to get quicktime to read .avi files or if there is any programs out there to use on macs to watch .avi files. I am not doing anything illegal either, i bought a disc from my local cd store that has music videos on them in .avi for
-
Export web HTML4 to a new web HTML5
Hi, i have a site. This is a old site. The site is in HTML4 OLD. I use the Dreamweaver CC 2014. How can i export the site to HTML5 format? responsive? Thanks.