FCP Project freezing in some areas of the Movie in IDVD 08

I have done a dvd movie in Final Cut Pro 5 I have exported in Quicktime. Placed it in the IDVD 08 and when checked it plays most of the movie however it gets stuck in some places (same each time) the audio keeps playing then the movie unfreezes after a few seconds and then goes again. I have gone back to Final Cut to check the footage and it plays fine and it is all OK however, in IDVD it freezes in some points. PLEASE HELP/___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstatic_ __/migration-images/migration-img-not-avail.png

Too late to edit. I noticed I posted the wrong article above. Here is the correct one:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6652.html

Similar Messages

Subject : Slideshow looks bad Hello guys I have a project in my Final Cut just about done. I want to add my slideshow as part of the project and burn it to DVD. In my slideshow, there are some stills from the movie clips and some downloaded from the i

Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSC

Thank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc

I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.

When importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed.

when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.

here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
It only cares about length i.e. max 2 hours including titles etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

I downloaded a movie from itunes on my ipad. In the downloaded area where the movie should be, I only get a link to "iItunes Terms and Conditions", no movie. There is nowhere to accept the terms and conditions.

I downloaded a movie from itunes on my ipad. In the downloaded area where the movie should be, I only get a link to "iItunes Terms and Conditions", no movie. There is nowhere to accept the terms and condotions.

Nevermind, the movie was there in the Videos app, not itunes downloads. Thanks.

Where are all the movies?

Where are all the movies to rent? The lineup is horrendous. I keep hoping that one day there will be a ton of content. So far it’s severely limited. I thought a bunch of movie studios signed up for this.

I'm with you I am a Si Fi junkie and the SiFi channel is not even on their list of stations, but the main flux is there are a whole bunch of really great shows that I would love to see. I figure Apple is charging a premium for TV and Movie content, why than is the Apple offerings so small, I would think it would be to there interest to offer a huge library as its maturing you would think they would be more fulfilling in supply. I love they way I can watch shows and don't have to fast forward through them, But am missing a whole lot of shows that could be offered. Must be a big process for them to put there restrictions of use making it harder and a longer process to add content, Come on Apple give Apple TV more resources, before the competition matures and people are renting from other sources.I really enjoy the Apple TV quality and ease of use, but there will be a time when PC comes out with an easer and as good of quality UI with a larger library. So where is all the content?

Wired Mighty Mouse isn't clicking some areas of the screen

I'm having some trouble with my Mighty Mouse since yesterday. The system started not responding to some clicks in most areas of the screen, such as the top menu, window titles, finder windows, desktop. The weird thing is that clicking in Dock icons works fine, as well as clicking inside a web page in Safari.
I've rebooted several times, ran the Snow Leopard 10.6.2 update, but none of these helped. :/
Do you guys know how to get around this? Next Monday I'll test this Mighty Mouse with my Mac Pro at work, I hope it's not a problem of the mouse itself, but a system problem.

I had exactly the same problem after giving my ball a super long scrub to clean it. Only the secondary click sometimes worked. Checked to cable iside, but no luck.
Then went to System Preferences as I figured the middle button was working a bit and set all buttons to Primary by selecting them with the Tab key, scrolling to my option with the up and down arrows, and confirming by pressing the Space key.
Now my mouse works as a simple one-button device, but that it OK for me. Must have damaged its brain with my ball cleaning. See how you go.

Is it safe to delete an iMovie project or will it also delete the movie in the Theater?

Is it safe to delete an iMovie project to save memory or will it also delete the movie in the iTheater?

Thank you very much....I am new to Apple from a pc, so I am really a novice!!
Just to clarify, the movie will stay in the file and in the theater even though it is too big for iCloud?

Some functionality of the move tool stopped working after Photoshop Elements 12.1 update

After updating to Photoshop Elements 12.1, the move tool can not be used to drag and drop one photo onto another (when more than one photo file is opened). Please advise.
Ted

This is a new bug with the 12.1 update. If you are in 'Tabs' view then dragging from one tab to another does not shift the image focus so you can never drop. A bug report for it has been created at http://feedback.photoshop.com.
Workaround is to switch to tiled view (Window> Images> Tile in Expert view) and tile your images side-by-side then you can drag and drop.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Where are all the movies stored taking up lots of space?

According to About this Mac, Get info...my movie storage is over 100 gig but can't seem to find it anywhere on my computer? I've got about 20Gig in my Movies and Music folder but can't seem to see anything else anywhere. Where esle can I check?
Where do Mobile Applications get classified in About this Mac Get Info? Cuz I've got 26 Gig in there. And where do all the movies you take in iPhotos get stored? As part of Photos? Or Movies?

Thanks Macjack. So I've got 100 Gig in Dropbox in my user folder...I didn't think drop box would take up space on your computer? I tought I could transfer everything off my computer into dropbox, and delete everything in my computer folders that I transfered to dropbox? I tried to do this but everything disappeared in Drop box and my user folder. Must they be the same and is the information then duplicated?
So what I did was copied everything in my documents and my iPhoto library into dropbox. Then deleted everything in my documents folder (not iPhotos cuz that's still transferring over!) and after a day or two everything was gone from dropbox as well...luckily I had it all backed up and was able to bring it back. So is everything duplicated then? On my computer and drop box?
Sorry if this is all confusing...

Portege 3440CT freezes after some time while the files are being copied

Hello all :)
It seems I'm having the same problem as missred in this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232 (on the bottom). Unfortunatelly I can't reply there that's why I'm writing here. My laptop version is 3440CT.
My try was to make a win98 bootable HD drive with i386 directory on it, boot from this disk and start the installation with winnt.exe. OK, it works but while the files are being copied after some time it just freezes. I tried it both with one partition and i386 on active system partition and with two partitions and i386 on a separate non-system partition. I don't have FDD or CD for the laptop.
Any ideas what is wrong? Is it possible to install XP on the same disk the XP installation is started from?
Can't wait for your replies ;)
dzi
PS: My other tries were:
- complete XP installation on another computer and then switching the drive
- XP installation on another computer up to the point it first resets (after finishing of coping the installation files) and then switching the drive
both unsuccessful. I also changed the drive to another one as I suspected it's phisically damaged. Now I'm out of ideas ;)

+My try was to make a win98 bootable HD drive with i386 directory on it, boot from this disk and start the installation with winnt.exe. OK, it works but while the files are being copied after some time it just freezes.+
It should work out this way, so........ is it really freezing or did you forget to include "smartdrive" ?
Be sure to include the file in the root-directory of your HD and put the right command in your autoexec.bat file
In the link you refer to you can find all the details
and ...... yes, you can install XP on the same HD the installation is starting from
you can also look into this thread for more info :
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=87872

Published Captivate 6 project freezes on slide immediately before the first question slide

I am running both CP6 and CP7 on Windows 7.
I am still working on projects created with Captivate 6 in Captivate 6. However, since installing CP7, any projects that I edit and publish with CP6 freeze up on the slide just before the first question slide.
Since I have only begun experiencing this issue since CP7 was installed, I am assuming that it is something to do with the fact that i have both versions (6 and 7) installed.
The only solution I have found so far is to open and publish the project in CP7, but this is not ideal as the projects I am working on in CP6 are new versions of ones already published in SAP LSO and I am concerned that publishing new versions of my courses from a different CP version will cause issues in LSO.
Any ideas why this might be happening? Ideally, I would prefer to continue to use CP6 for existing projects and only use 7 for new projects.

Hi there,
Have you created those projects in CP 6 from Scratch?
Can you check the complete version of CP 6 (Help > about Adobe Captivate), it should be 6.0.1.240 or 6.1.0.319.
Can you test with a blank new project in CP 6 after running it as Administrator (Right Click on CP 6 icon, then select run as admin).
Thanks.

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

How to cover some area in the software simulation?

I used Captivate 5 to record my screen opeation . And I don't my name in the screen showed up. So I use the image to cover the area I don't want to show. However, the name still flash some time. It seems that I can't cover it all the time. So I want to know what goes wrong and How I could cover my name all the tiem. Thank you.

Hello and welcome to the forum,
What do you use to cover up: a drawing object like a rectangle perhaps? By default it will have a 'transition' set to Fade in/Fade out. Check this in its Properties panel, Transition accordion. Eventually you could also merge the object into the background.
Lilybiri

FCP Project freezing in some areas of the Movie in IDVD 08

Similar Messages

Maybe you are looking for