FCP project sounds a little fast.

I opened up my FCP project(running latest version of FCP Studio 2) and the audio sounded a little fast, like it was rushing a bit. The picture played along in sync. I played it a couple of days ago and the tempo seemed fine. What might be causing it to race?

Funny thing and I thought this had happened before: although the computer had been on for a while, the FCP project had just been opened this morning. While it ran fast this morning, and leaving the FCP open all day (while I shopped for goodies for the 4th of July), I played the movie from the FCP timeline and it sounded "back to normal" in regard to audio speed. Since the media is spread out over several drives, maybe it had to be "woke up" a bit. As the project is only about 65 per cent done, I won't be trashing preferences just yet(did that once in the past and don't want to do that again!). And after it is completed and color corrected. I will consider the latest Quicktime update as well. I will export from the timeline when the project is done using the existing version 7.6, then install the latest and see if that makes a difference too.

Similar Messages

FCP project not the correct aspect ratio when exporting to Quicktime

Hello All;
I am trying to export a FCP project in its native resolution (1440 X 1080) to Quicktime but everytime I try, the aspect ratio is messed up and people look taller and thinner than they should.
The project is a resolution of 1440 X 1080 as determined by examining the sequence settings in FCP.
I configure quicktime (see below) to a resolution of 1440 X 1080.
So why isn't my Quicktime video the correct resolution when I play it with the IMac's Quicktime player ? I shrink the player to 1/2 size to fit it all on the screen.
My exact settings are below ...
Export - Using Quicktime Conversion
Format - Quicktime Movie
Video Settings - Compressor - MPEG-4
Quality - Best
Not sure if I changed the framerate - if I did, I probably changed it to 29.97
I didn't touch the other settings in the video settings - left them to default
I didn't change the filter settings - I left them at default
Size - 1440 X 1080 (The actual resolution of my source video)
I checked the box - preserve aspect ratio using letterbox (If applicable)
Other settings were left at default
Sound Settings - Format - AAC
Rate - 48 KHZ
Render Settings - Quality - Best
Target Bitrate - 128 KHZ (This was left at default - I did not change it)
Prepare for Internet Streaming - Fast Start checked (This was default - I did not change it)
All other settings not specifically mentioned were left at default.
Thanks. Tim

I don't have much of an answer for you, but to test try not checking the preserve aspect ratio. Rather than reexport the entire 1 hour just export 10 seconds so that you can trouble shoot different things.
Hope that helps a bit,
Eric

Opening FCP Project; Superdrive goes crazy

Hi There
I've been FCP user for 4 years and I really love it as an editing suite, but there is few little problems that really frustrates me.
I've just noticed lately on my MacBook Pro, when opening up a FCP project if I have a DVD / CD in the drive, it starts goiing crazy.
It sounds as if the project is trying to find missing material on the DVD, which in turn makes the motor start churning.
Not only is it an unpleasent sound but it takes forever to open my project.
So far my only solution is to take the DVD out.
If anyone knows of why this is happening, if I can do anything to fix it or is having the same problem please let me know
Thanks alot
BluHawk

That's the solution. Don't leave a disc in the drive unless you're planning on using it.

Recording standard dvd from completed FCP project thru DVD STUDIO PRO...

OH, kind geniuses...
it boils down to this...I'm very FCP friendly...production is done...I'm aware of "compressor" issue...one question tho
...is it easier to compress thru Quicktime movie or the
standard compressor functions when project is completed...
BOTTOM LINE...is it possible to crank out a standard DVD copy of a completed FCP project QUICKLY/ EASILY...thru
DVD STUDIO PRO? i've went thru the manuals for ALL, and am
affraid I'm reading T.M.I. into it... THE question..."is there a simple Wham-Bam-Thank You-Maam way to get a simple
DVD copy from a completed FCP project THRU, (the dreaded)
DVD STUDIO PRO??? I don't need to re-learn digital electronic theory...just crank out a gawl-dern DVD I can
present to a perspective employer that needs a FCP editor...
"much gnashing of teeth & lament",
thanks folks!
G. Tirebiter
mac G-5 Mac OS X (10.4.7) final cut studio

whoaohohohohohohoh nnnnnnneleeeee(a keith jacksonism)
silal..............
way too much info, amigo....I have one track (2min total...
including "live-type" graphics)....we don' have no marks....
we don' need no marks....we don' got to cho you any steenking marks!!!!! (Alfonso Bedoya from "treasure of Sierra Madre"..adaptation)...I love that guy/scene...back to the problem at hand...waaaay too involved it seems, my
friend....tho, I high 5 you for the extensive work & effort.
I'm lookin' for quick & dirty...did get a response that basically gives me that...still left out some "see spot run"
info that my "little grey cells" aren't absorbing...I'm
sure it's MY ignorance & comprehension skills that are in question here...I guess I wanna' get outa' th' gate & grab th' hole shot before I dial in my ride...like I said..."see spot run"....another try would be appreciated but not necessary...thanks for you're valuable time...
they're in.......everybody's eggs...
DOH!....
G. Tirebiter
mac G-5 Mac OS X (10.4.7) final cut studio

FCP Project file won't open

Hello,
An FCP project file I worked on this past Friday suddenly won't open. When I try it immediately gives the helpful "general error" message. I tried opening the autosave files as well, with no luck. I tried renaming the project file and manually adding the .fcp extension, but still nothing. I'm not sure why it's doing this, since nothing unusual happened in the last few days. Any thoughts would be greatly appreciated.
Power Mac G5
6gb ram, dual 2ghz processor
FCP 5.0
Also, does anybody know where I can purchase an unused version of the FCP 5.0 bundle? I can't upgrade because of OS and processor restrictions on my old G5. And I can't buy a newer mac right now. All of my related FCP programs are starting to act buggy, and I don't have the install cds anymore. Any ideas?

I can't upgrade because of OS and processor restrictions on my old G5
Huh? According to the requirements for FCP 6, it needs A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor and Mac OS X v10.4.11 or Mac OS X v10.5.5 or later. How does your computer not fall into this range?
Patrick

PLZ HELP.. How can i make dvd from FCP project..

Can someone plz help..
I have FCPPRHD and DVD Pro..
I got lost trying to make a dvd out of fcp project
Can someone plz help in easy 123.. steps how to make a dvd for my client to view..
Thnx ever so much
awaitng ur reply

I don't want to sound too harsh, but you really need to read the manual and do the tutorials.
You shoot, capture and edit in FCP. You export that to MPEG2 using compressor and you import the resulting video and audio files into DVDSP. You add a menu and set up buttons to get to the footage, and you set up navigation so that your client can get back to the menu at any time. You build and format that (i.e. burn the disc).
That's the process, but it is very much more detailed than any of us could write here.... it's all in the manual and tutorials

Upload FCP Projects and Associated Media to a Production

Hi,
This sounds very silly but I`m really disappointed and can`t figured out how to do it.
Is there a way to upload a *.fcp project and associate NOT ONLY the project but ALSO the Media that this project contains?
In other words, if I upload a FCP project and choose a Production to be associated the production is created but ONLY the FCP Project Asset is inside this production, not the whole medias.
A scan production (for the FCP file) also doesn`t work.
What works is uploading all media and associating to a production or do a Scan production into a directory with medias. But my FCP and Medias are in distinct places and a thought that FCP project could help me cleaning the Media directories (by uploading the project and after all medias are catalogued archiving them, so the rest in directories are useless).
The work around would be:
1- to do a Scan Production in the Media files and after that uploading a FCP project associating with that Production, but as I`ve said I can`t just scan the entire Media as it`s very messy and with this way I could be guaranteed that my important assets are catalogued (and archived) and the left ones in the messy directories could be quick filtered to exclusion and cleaning without worries.
2- to upload a FCP and associate to a production and after that manually move fcp associated assets to this production (this almost impossible because the limitation of 200 assets per page).
Can some one propose a better way?
Regards

No, you are correct, but unfortunately these are Elements (inside the FCP project) and not real Assets. So for instance, if you fill in the annotations on the Asset it will not show on the Elements (inside FCP projects) and vice-versa. You can`t do a lot of other things as well with elements as you can with assets.
So I would like to have a Production with all media created automatically when a FCP project is uploaded (or scanned).
Regards

FCP project to DVDSP4??

I converted the FCP project to "MPEG-2" in Compressor like a lot of you recommended. The video played well, but there was no sound. Did it not convert audio? How can I include the audio? What setting do I have to use in Compressor so I can convert my FCP project (with video and audio) to a DVDSP 4 friendly format?

When encoding for a DVD, you'll need to do 2 separate encodes. Video (m2v) and Audio (ac3 or Dolby).
One of our frequent members, Drew13, has posted many links that will help you understand this process better. You can find those links here.

PROBLEM Compressing FCP PROJECT into file for DVDPRO

**this is my information...**
I'm EXPORTING a FCP project which is 45 minutes in length. I EXPORT it to COMPRESSOR. COMPRESSOR opens and shows the FILE in up LEFT box where I drag Presets. It gives me the PROJECT NAME but in the little picture box it just shows the FCP ICON. I know when I EXPORT a QT movie of a FCP project, a frame of the project appears in the little box where I drag the presets. This time it doesn't. So I don't know if that's an issue. I'm using DVD preset "DVD: Best Quality 90 minutes". It begins to compress the FCP file which takes roughly 2 hours. I check and it says it's "successful". BUT when I open DVDPRO and import the project to burn there is only ONE FILE not TWO FILES which would be the AUDIO and the VIDEO file. so DVDPRO does not recognize this and it won't burn. What do I do? THANKS for you help. Andy

Try exporting the sequence as a self-contained file using "current settings". This should result in one file with all the quality of what was on the timeline. Make sure this is in a folder located on your scratch (non-system) drive.
Then, open up Compressor, drag in the just created file, apply the "DVD best 90 minutes" preset making sure both the m2v and ac3 compressor actions are included and set the output directory to "Source".
Let it run.
Do you have .m2v and .ac3 files located in the same folder as the original self contained .mov file when complete?
x

Editing FCP project audio in another audio application (Logic, PT or DP)

Many thanks in advance for any help - I am wrapping up a score for a friend's documentary and just don't have time or video knowledge to figure this out on my own.
I need to edit sound in his Final Cut Pro project in another application. Pro Tools, Logic or Digital Performer. I can't just get AIF bounces because in many cases I need to access his edits, requiring much of the raw audio immediately preceding and following his cuts.
What is the quickest way to do this? Do OMF files preserve raw audio? XML?
Again, many thanks for your input.

I found the XML approach to be the most reliable, but you need access to the full FCP project and all the assets for Logic to load it, which can be a pain due to project sizes.
OMF works, but doesn't preserve some of the audio mix settings, despite including them in the file. Sometimes this is important, sometimes less so. Not sure if recent versions of Logic have improved this behaviour.
Either will get the audio into Logic at the right places and preserves edits, and OMF is the simpler way of doing it. I can't remember offhand if the OMF export allows you to add handles on the audio - in the main what OMF does is repackage out the audio into new audio files inside the OMF bundle, so you get everything in the timeline but not audio either side of the cuts.
Edit: Yes, OMF export does give you the option of adding handles on the audio files.
If you need everything, the using XML and the original assets is the way to go imo.
Otherwise, OMF will get you the audio in a more convenient package (one file with all the embedded audio reexported inside it.)

Sound lost when fast forwarding.

When editing a sequence, I used to be able to hear the sound track when fast forwarding ('L' key). For some reason, on m new desktop, I can no longer hear the sound when I fast forward. Any thoughts?
Thanks!

How fast are you FF ?
I find that I can hear the speeded up audio to about 8x but beyond that it cuts out intermittently.
It could be that our computers are not powerful enough to keep up with the latest FCP X when in FF mode.

Backing up FCP Projects to multiple DVDs?

I'm looking for a workflow to backup FCP projects to multiple DVDs. I want be able to put DVD 1, of 3 or 4, into the computer and click something that will put all the files in the write place as if I never took them off my computer and I can go back to FCP project where I left off. Similar to spanning, like with Disco, but I want everything to go in its write place when I click on some Apple action script. Is this possible? If it isn't some little third party developer could make some money.

Divide your salary by 2,000. Then double the result. This gives you a very rough approximation of the value of your time, including how much the company pays you, payroll taxes, insurance, overhead and so on.
Figure out how many hours you'd have to sit in your chair doing manual archiving before you cost the company more than $120.
I'd be stunned if it's more than about two hours. Three at the absolute most, if you're criminally underpaid.

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media.

FCP Project won't open in new version

I want to work on an old FCP project I haven't touched in years. I have all the files but not the application any longer (was FCP from 2004). I downloaded the new FCPX trial version but it won't recognize the older files. Do i need an older FCP version?

Depending on what you need to accomplish with this old project, don't discount the possibility of importing a flattened Quick Time movie and working with it in FCPX. Not ideal, but perhaps acceptable.
It seems like a waste to pay the considerable amount pf money that getting either Final Cut Studio 3 or 2 would presently require. (If you go to Amazon, you'll find new sets of FCS3 selling for premiums ranging from $300 to nearly $1,000 above the original price; used sets are selling for nearly as much as the original price.)
The apps in these suites were great for their times, but it's been well over four years since they recieved a refresh. Many who own them (myself included) continue to use them and expect to continue to do so on operating systems like Snow Leoppard for some time. But sooner or later, a new OS version will break them as will the dereasing cability to handle new formats.
Good luck.
Russ

How do I import old FCP projects that have mysteriously changed to Linux Executable files? Is it as simple as renaming the files with the.fcp extension?

I had some FCP projects on an old G3 tower that I finally want to finish. I was able to grab everything, media, etc. to my macbook pro but all of the Final Cut Pro actual movies/projects have turned into "linux executable files" that FCP X won't import.
I tried googling this issue but didn't really see any good answers. Would it be as simple as renaming the files with the .fcp extension? I can't recall if my old version (really old) of FCP saves projects as .mov or .fcp files, but I'm assuming I'm not the only person this has happened to.
Thanks for your help!

I had some FCP projects on an old G3 tower that I finally want to finish.
What version of FCP was this? The project files can probably no longer be opened in the newer version of the OS. You could try adding the .fcp suffix, but I don't think it will help for this. Projects files are .fcp.
Regardless of the version, no legacy FCP projects will import into FCPX.
Media is a different matter. These are probably QuickTime .mov files. If these are appearing as Unix ececutables, they're probably not recoverable either.

FCP project sounds a little fast.

Similar Messages

Maybe you are looking for