FCP + Quicktime crashing - Foundation.framework missing from system?

Ive been having lots of trouble with programs such as FCP HD since updating the program to 5.1 and the system to 10.4.8. The constantly crash and I get the same recurring error messages:
Link (dyld) error:
image not found /System/Library/Frameworks/Foundation.framework/Foundation
So Ive looked in the Frameworks folder in the System, and there is indeed no Foundation.framework in there at all.
So I then ran Disk Utility and asked it to verify the volume, and it comes back saying:
...Checking Extended Attributes file.
Overlapped extent allocation (file 7025 /System/Library/Frameworks/Foundation.framework/Foundation)
Overlapped extent allocation (file 490235 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Support/ATSServer)...
Now this is where I get a bit lost - is it saying that these files / folders are corrupt? Ive reinstalled the entire of OS X since having this problem and it hasnt fixed it. Disk Utility just tells me:
"Invalid volume free block count
(It should be 45802333 instead of 45802331)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair"
but then the "Repair Disk" button is greyed out.
Could anyone point me in the right direction?
Thanks

Hi, kero. Welcome to the Discussions.
You cannot Repair your startup disk while you are started up from such: you can only Verify it, a feature known as Live Verification, and only if Journaling is enabled on the disk.
Run at least Steps 1-3 of the Procedure outlined in my "Resolving Disk, Permission, and Cache Corruption" FAQ.
I suspect, however, that you'll need to use the advice in the "Disk Utility cannot repair the disk" section of that FAQ as the errors you've reported indicate serious hard drive corruption.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Similar Messages

I cloud missing from System preferences.

Hi,
I am running 10.8.4, I cloud is missing from system preferences.I tried some stuff suggested on website nothing worked out so far. Any suggestion?
Ari

Is iCloud the only thing missing from System Preferences?
If, while in System Preferences, you click View -> Customize does it show up then?

Bootcamp Icon missing from system tray...

On the 1st computer (iMac) that I installed BootCamp with Win 7, I have an icon in the lower left system tray for changing the booting choice.
Today I installed BootCamp on my wife's new Mac Mini and the icon is missing from the system tray. While it was about 6 weeks ago that I put BootCamp on my iMac, I don't remember doing anything that cause the Windows system tray to display the boot choice icon for BootCamp/Win 7.
Anyone have an idea about how I can get that icon to appear on the Mac Mini.
Both systems are running Snow Leopard with the latest software.

Macaby there are two separate components of Boot Camp. First is Assistant which runs on the Mac side of things from OS X. It creates/deletes the Windows partition which is necessary to install Windows. Next the Boot Camp Panel software which is installed once you have successfully installed and are running Windows. It allows tweaking of the Apple hardware from within Windows. It is installed using the OS X disc and does not jeopardize your installed Windows OS in any way. This disc also contains the hardware driver necessary to optimize the hardware in Windows. In my experience this disc has never started via autorun so you will most likely have to locate the Boot Camp folder and run the setup.exe file manually.
Don't know how much your wife uses Windows but if it's running well enough then you may want to leave it alone. Check device manager in Windows for any red or yellow punctuation marks. This will indicate a potential driver issue in Windows. Also check the Windows Experience Index for performance issues. A 1 anywhere indicates a driver issue. If you have no driver issues and Windows is running well enough you may want to leave it at that.

FCP keeps crashing when loading thumbnails from bin

Hey folks,
I am having constant issues where FCP keeps crashing when I load a bin with thumbnails. This doesn't happen every time I open a bin, but after I open say 6 or 7 bins. After the research I have done I have come to a couple of possible solutions 1= this previous post
http://discussions.apple.com/message.jspa?messageID=9545404#9545404
The only thing that is stopping me from trying this procedure is I don't have another Mac with the VADriver, so I have to extract it from the OS DVD, which is fine thanks to the Pacifist program which makes it easier, but I don't know how to get the specific file extracted.
I also noticed that the guy who solved the same issue with this procedure has an older OS to mine, so surely with the new OS the problem would have been resolved??
2= the other solution seems to be to put the footage onto a hard drive with a faster connection other than firewire 800. But this doesn't seem right to me because the project worked perfectly fine on the old PowerPC Mac using the same external FW800 drives I am using on this computer.
I would appreciate any advice. at this point I am probably wasting around 1-2 hours a day with FCP crashing and having to reopen the project to work on it again.
Anyone having similar issues?

Here's what the fabulous Crash Analyzer says about it:
*MPEG Media*
This crash appears to have been caused by MPEG media (or MPEG-derived media such as XDCAM, HDV or H.264) in the timeline. MPEG-based media is not recommended for editing in Final Cut Pro.
*Suggested Actions*
Set the codec of your sequence to ProRes in Sequence Settings.
Alternatively, and for best results, transcode any HDV, MPEG-2, XDCAM, AVCHD, H.264 or other long-GOP media into an editing-friendly format such as ProRes or Apple Intermediate Codec (AIC).
*Relevant Line*
0 QuickTimeH264.scalar 0x0f7114d7 JVTCompEncodeFrame + 2769062
Report generated by Crash Analyzer in FCS Maintenance Pack
You can download a fully working demo of Crash Analyzer from Digital Rebellions website ... and then you should buy it! Its worth every penny.

Icon missing from System Preference on MacBook Pro. Please Help

The icon for my mail, contacts and calendars is no longer under my System Preferences. Can someone help me get it back? Thanks.

If you're running the OS version in your profile, you never had that icon. Assuming the profile is wrong, do as follows.
Select
View ▹ Customize...
from the System Preferences menu bar. If the missing icon appears, check the box next to it, or click Show All. Then click Done.

Energy Saver Options Tab missing from System Preferences Pance

Recently I upgraded with Combo Update Snow Leopard 10.6.2 on my Mac Pro and now I find that I have no Options Tab in the Energy Saver Pane of System Preferences. All the options that used to be available there cannot now be accessed. Sleep\Wake is functioning fine, and I can't remember what settings I had or even used. It has not been critical for me so I rarely check these options. It is possible that the tab disappeared when I applied the latest Security Update a few days ago - I'm not sure. Since the big weekend storm here I want to use the automatic restart after power failure feature that I think lived behind that tab. Thanks for any help.

I should say that I rarely, if ever, use the lower missing options mentioned above. If I am accessing the Mac Pro from my other local computers I just wake up the Mac Pro. And I can't ever remember wanting my computer to restart after a power failure. If we have a power failure in this area, it is likely to come back on and then just as suddenly go off again. Not a good thing, I would imagine, for delicate electronics. Usually I wait 30 minutes to an hour after the power resumes in my home before powering up any electronic equipment.
I do wonder why the options disappeared though.

Harddrive Crashed-One artist missing from purchased...

My harddrive crashed recently and I had to replace it. When I went to get back my purchased songs from iTunes, all of them were there except for the songs of one artist (Utada Hikaru). I had 5 songs from her and none of them were found and when I go to "check for purchases" it says I have all the songs associated with this account (and I only have one).
I bought these songs from the US iTunes so I don't understand why those are the only ones missing. Does anyone know?

Just a thought. Are the songs of the 'missing artists' marked as 'Part of a compilation'?
You will find the checkbox when Getting Info (command-I) of one of the songs (Info tab).
Artists whose albums are marked as part of a compilation do not show up in the iTunes browser. Their albums will show up when you select Compilations (left part of the browser pane, below 'All (xxx Artists)').
M

Aluminum imac 2.4ghz bluetooth missing from system profiler

Now used to have my phone a nokia e61 paired with my imac a few weeks ago i transfered photo across but recently that the bluetooth icon in the menu bar had been grayed out and the system profiler doesn't have any bluetooth info, i've don't a firmware update recently but I don't think that disabled the bluetooth, ideas or help would be much appreciated.
thanks Ade

As Eustace says, it's likely a hardware fault, although the following suggestion worked for me when I helped my neighbour who lost all BT connectivity on his iMac a while back.
Apart from the Magic Mouse what keyboard do you have - wired or BT?
To do this you might need to use a wired mouse/keyboard just in case you lose your limited BT connectivity and end up not being able to log in. In Macintosh HD>Library>Preferences, do you have this file:
com.apple.Bluetooth.plist
If so, move it to the desktop and restart. If BT does come back to life this is where you might need the wired mouse/keyboard to get your BT devices re-connected. If this works you can dump the file you moved to the desktop.

Icloud icon Missing from system preferences

Why can I not find my icloud icon in system preferences? Help!!!

Because you're running Snow Leopard (10.6.8 as noted in your profile)?
You must upgrade to Lion or Mountain Lion to 'get' iCloud. Or just wait until Mavericks is released later this fall. You can directly upgrade now to Mountain Lion, if your system has the right specifications -> http://support.apple.com/kb/ht5444 - or wait for Mavericks. Your call. Mountain Lion is $20 and available from the Mac App Store: Apple hasn't announced a price for Mavericks.
Good luck,
Clinton

Updated my K450e to Windows 10, Realtek Audio Manager icon missing from system tray

When my K450e was using Windows 8 and 8.1, there was a red Realtek AudioHD Manager icon in my system tray. Now that I've updated the K450e to Windows 10, there is no Realtek Audio Manager icon in my system tray (or control panel) anymore. I've tried installing the Realtek Audio software both from the Lenovo download site for Windows 10, and also from the Realtek site. This has not helped. On the up side, the computer's audio is working fine *smile*. Any ideas what I might try to get the Realtek AudioHD manager icon back in the system tray for Windows 10? Thanks!

Macaby there are two separate components of Boot Camp. First is Assistant which runs on the Mac side of things from OS X. It creates/deletes the Windows partition which is necessary to install Windows. Next the Boot Camp Panel software which is installed once you have successfully installed and are running Windows. It allows tweaking of the Apple hardware from within Windows. It is installed using the OS X disc and does not jeopardize your installed Windows OS in any way. This disc also contains the hardware driver necessary to optimize the hardware in Windows. In my experience this disc has never started via autorun so you will most likely have to locate the Boot Camp folder and run the setup.exe file manually.
Don't know how much your wife uses Windows but if it's running well enough then you may want to leave it alone. Check device manager in Windows for any red or yellow punctuation marks. This will indicate a potential driver issue in Windows. Also check the Windows Experience Index for performance issues. A 1 anywhere indicates a driver issue. If you have no driver issues and Windows is running well enough you may want to leave it at that.

Why is the padlock missing from System Preferences, App Store?

I noticed that System Preferences, App Store no longer shows a padlock at the lower left hand corner, yet other System Preference windows show the padlock. Why is that? Is there a way to restore the padlock? I have already tried "repairing" my install and the padlock did not come back. Thank you.

This will answer everyone of y'all, why some have it and why some don't.
System Preferences---> Security & Privacy---> (unlock the PadLock)---> Advance---> checkmark the "Require an administrator password to access system-wide preferences."
Before I checked that, I had the same set up as FoxFifth. Where App Store, Time Machine and others did not have the PadLock. However, after checking it. The App Store and Time Machine did have a PadLock.
KOT

Remote Icon Missing from System Tray

I just installed zenworks and it doesn't display the icon in the system tray how do i get this to display?
Thanks
Aron
Aron Hardie
Net Admin
Great Western Services

Go to the Counting Crows concert with Walter(Matt Damon) and he will
explain it to you...
Bryan
> Aron Hardie wrote:
> > I just installed zenworks and it doesn't display the icon in the
system
> > tray how do i get this to display?
> >
> > Thanks
> > Aron
> >
> > Aron Hardie
> > Net Admin
> > Great Western Services
>
> Did you check the option to have Application Explorer startup with
> Windows? If not, you can start it by going to Start->Programs-
>Zenworks
> For Desktops 4->Application Explorer.

File Sharing Missing from System Preferences Sharing

Hello, I am running MAC OSX Server 10.5.8. When I open System Preferences and click on Sharing I do not see the option to enable File Sharing. What must I do to get that to show up in the list? Right now my list looks like this...
__ DVD or CD Sharing
__ Screen Sharing
__ Remote Login
__ Remote Management
__ Remote Apple Events
__ Bluetooth Sharing
That's it. No File Sharing and everything I have searched to this point makes me believe it should be there.
Also, I have enabled AFP, NFS, SMP in the Server Admin. I have also turned off Firewall just to see what happened. Nothing.
Thanks for your help.
Model Name: Mac Pro
Model Identifier: MacPro4,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per core): 256 KB
L3 Cache (per processor): 8 MB
Memory: 16 GB

Better still, try Apple - Support - Discussions - Mac OS X Server v10.5 Leopard.

Text missing from system preferences permissions window

I recently changed the short name on a 2009 (I think) Mac running OS 10.6.3. Everything transfered over fine, but when I went to disable the root user, the window asking the username and password appears completely blank (see picture below).
It's only happening with one user and only within systems preferences. I can select the different fields, but the text is not visible. However, I have been able to enter the information and proceed to unlocking the area.
If anyone out there knows how to fix this, your help and knowledge will be much appreciated!!
Thanks,
Casey

Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them, then boot in safe mode to rebuild the font caches. Boot again as usual and test.

I've MacBook Pro 2009 model... from last few days my airport is not functional. This happened when I deleted list com.apple..... from systems folder from library- preference- system. Now, when you check the status of Airport hardware it says "Not

I've MacBook Pro 2009 model... from last few days my airport is not functional. This happened when I deleted plist of com.apple..... from systems folder from library-> preference->system. Now, when you check the status of Airport hardware it says "Not Associated". One more thing that came to my notice is that 'com.apple.internetconfigpriv.plist' this file is missing from system folder. Any help would be appreciated.
Thanks

Thank you for your reply......
I have tried using different OS 10.7, 10.8... further OS doesn't suit my MacBook, so currently I am on 10.6. I did reinstallation twice using 10.6 but the files were not restored.
Yes.. I am talking about internet wireless card.
I don't have back up files for files which i deleted and they are not in trash as well.... the reason I deleted files was from the image attached from OSXdaily.com
I have tried resetting the PRAM, NVRAM, SMC but to no use.
now what do I do.??

FCP + Quicktime crashing - Foundation.framework missing from system?

Similar Messages

Maybe you are looking for