FCP & QuickTime DvcPro HD Digitizer 720p 25 for PAL Big World Missing!!!!

Now,
after I've been days on DvxUser forum, tried various solution found there I'm ending up with a simple question as an HVX200 user:
- What's the problem with the PAL Huge World, Apple? As far as I know my International clients when ask for an Ntsc copy is for US or Japan (the other few that use it are out of the big Business).
- So WHY Apple, that is in the video/film business since the begging of NLE systems, always forget? or it's late in developping Pal solutions?
From Panasonic Q&A P2 site:
Q5 : Can the AG-HVX200 output the SD or HD signal through the IEEE1394 terminal?
A : The AG-HVX200 can output the SD or HD signal through the IEEE1394 terminal according to the menu setting.
Select the format in the "REC FORMAT" item of CAMERA menu.
In the native format, 720/24PN, 720/25PN or 720/30PN, the AG-HVX200 cannot output the signal of camera picture through the IEEE1394 terminal. In this case, record a picture on a P2 card once and then playback it.
When output the signal recorded on the P2 card, the signal is output through the IEEE1394 terminal in its recorded format and cannot be output through the IEEE1394 terminal in the up-converted format or the down-converted one.
- The only easy setup for Log & Capture DVCPRO HD is 1080i50. That's it!
- While in Ntsc has 1080i60 and all 720p: 24/30/60.
Even with the Sequences setup!! Thanks to some guys that wrote a great pdf and also an Xml file for a sequence 720p 25 and 50...
So the HUGE World of Pal users has to help themself....
Hopefully if these 30 glorious years are just the begging, the next will be also HD PAL years!!
piero

Hi Shane,
thanks for your point of view, I always appreciate your advices in this forum.
Back to issue, the problem is Capture (digitizer) that is limited to 1080i50 not for Compressor (if you look inside the Capture Preset 1080i 50), so you can't use any other option than P2 card or Firestore to get the other HD Pal formats.
I also want to share (may be someone else already did it, but as in latin "Repetita juvant") the link on that helpful site on FCP and DvcPro HD, and Hvx200 also. He has done a great job for all of us pal'ers:
http://www.aulich-adamski.de/wp-content/720p50HVX200en.pdf
So the points are:
- The world is going HD? Yes! So our business!
- ok Hdv has been adopted by major prosumer camera maker.
- the DvcPro HD Pal codec is not that new (the Varicam, the 900, etc).
- the HVX200 in just few months, as you can read on DvxUser forum, is very popular in all of the application (indie, commercial, music video, doc, feature film or tv series) and the results are very good.
- Is FCP a pro application? Yes, so...support professional people.
- It's much more easier to work in FCP with DvcPro codec than Hdv.
- I've seen many posts of Hvx users that were asking for a live capture solution apart from Firestore and similar. We are in that group, as we've to shoot hours of live content.
- The new Mac Book Pro cannot (by now) accept P2 Cards 'cause the express slot. So we were buying two of them for HD work but we put them on hold and keep the PBook. So the alternative for MBP is capturing live via firewire, but limited in Pal market.
- Last but not least: Panasonic DvcPro HD Fcp plugin Frame Converter (for VFR) does NOT work in Pal even if you capture through P2 card.
May be is also Panasonic that is slow in updating Pal tools, who knows, but the only other alternative (that you can find on the site above) is using a Component HD card to capture the other formats, that means that you have to carry in studio/location at least a G5...
Finally, as I'm not a developper: does it take that long and is that heavy work to translate a QT digitizer codec from 24p to 25p? or from 60 to 50?
I'm pretty sure that if you do an online poll for Hvx users to pay 5 euro each one to have that codecs done by some developper, they will !!!
Take care,
piero
G5 2.0 DP FC Studio, PB G4 1.67, MacPro 2.66 Mac OS X (10.4.8)

Similar Messages

Preparing my FCP Quicktime movie for iDVD

Hi out there, can someone please explaine in detail what I have to do to a FCP Quicktime movie to prepare it for iDVD. Its 12 minutes long and 4.8GB. I tried putting it as is into iDVD and burning a DVD and the quality was bad. I presume I have to put it through Compressor?

How did you export the movie in the first place? Did you choose Quicktime Movie or Quicktime Conversion?
jk

How do I prepare a FCP Quicktime movie for iDVD?

Hi out there, can someone please explaine in detail what I have to do to a FCP Quicktime movie to prepare it for iDVD. Its 12 minutes long and 4.8GB. I tried putting it as is into iDVD and burning a DVD and the quality was bad. Do I have to put it through Compressor? Or, should I make a different kind of Quicktime movie?

Compressor is a program and you want to use it to convert your movie into an mpeg file and an ac3 file. 2 files to drop into your DVD program. Now, I haven't used iDVD so i don't know what it's asking for but. DVDSP is really easy to use if you just wan tto make a DVD without a menu. this requires an mpeg2 file and ac3. this you can make in compressor. in FCP have your timeline with your sequence in it active. FILE>EXPORT>USING COMPRESSOR. in compressor you can use the DVD 90 minute setting to make these two files. you have to check the manual cause it's different on how to do this with diff versions.
once you have your files drop them in DVD SP asset box then drag them in the timeline. delete the menue blue box right click the green track box, select 'first play' build/burn button at the top and you're on your way.
sorry if this seems confusing, but dvd technology is funky. idvd is great for making easy template menus but if you want to just make a playable dvd wihtout menus, DVD SP is the way to go.

How do I prepare a FCP Quicktime movie for DVDSP?

Hi there, I'm a beginner at FCP and have a deadline of the morning to supply to a client a DVD with two videos I have just finished. My editor is sick. Could someone please take me through each step. I have produced FCP Quicktime videos of each film which are sitting on the desktop. I have dragged them both into Compressor but its asking me to "Drag Settings and Destinations Here" I don't know what setting and destinations they mean. Also, can you lead me on from there, please........

http://discussions.apple.com/thread.jspa?threadID=1285710&tstart=0
Alberto

Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

I am unable to capture in FCP, Quicktime and iMovie.
I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
Here are the details…
- Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
- OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
- I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
- Deleted my FCP pref’s using FCP Rescue.
- Deleted the Quicktime receipts, and re-installed Quicktime 7.04
- Reverted back to Quicktime 7.01
- Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
- Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
- I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
I may have tried more solutions, but these are the fixes that I can recall.
If anyone has any others suggestions, it would be much appreciated.
Brent

Hi Brent:
Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
Sue

Ref. monitor for pal,ntsc and HD

hey there,
i am working more and more on my own edit station. so i want to make it more efficient.
i need a monitor or TV to see my edits on a bigger scale, something like a reference screen!!
and i need a pci card to connect it, too.
but here is the thing, ideally i need one that i can use for PAL, NTSC AND HD projects!
is that even possible??
my intention is mainly to see my edit on a bigger scale, not necessarily to have a 1:1 reference image because i guess that would be out of my budget. otherwise that would of course be very interesting!
i use a 2x2.66GHz Dual-Core Mac Pro Computer with MAC OS10.6.4 and FCP 7
thanks for your help and interest!!
andy

hey, thanks for your reply.
unfortunately those high end reference monitors are out of my budget.
i would already be happy, to have some sort of screen (TV or monitor) on which i can
see my edit on a bigger scale. i don't need it for color correction or finalizing.
and as i work on SD and HD projects, it should work with both.
so, is it possible to use a HD-TV or a computer monitor for that?
SDI or HDMI?
forgive me, if this is confusing, but english is not my mother tongue.
thanks again for your help!!

Audio upsampling in Quicktime Pro: Best export settings for Final Cut?

I'm using Quicktime Pro to convert audio from 32 kHz to 48 kHz, for use in FCE/FCP. Quicktime gives me several options for export settings. I want to make the conversion lossless, without increasing the size of the audio file too much.
These are the settings I'm using so far:
Format: Linear PCM
Channels: Stereo (L R)
Rate: 48 kHz
Sample Rate Converter Settings: Quality: Best
Linear PCM Settings: Sample size: 16 bits
Are these settings the best choices? Does anyone have experience doing this kind of upsampling?
Here are the other options in Quicktime:
Format: Linear PCM, A-Law 2:1, IMA 4:1, MACE 3:1, MACE 6:1, QDesign Music 2, Qualcomm PureVoice, and mu-Law 2:1
Channels: 2 Discrete Channels, Mono, Stereo (L R)
Rate: there are other choices, but I know 48 kHz is what I want
Advanced Settings:
Sample Rate Converter Settings: Faster, Fast, Normal, Better, Best
Linear PCM Settings (when Linear PCM is the format): 8 bit, 16 bit, 24 bit, 32 bit (floating point checked), 32 bit (floating point unchecked).
The file size grows quickly as you increase the Linear PCM bit settings.

You can't create something that is not in the file.
Moving from 32kHz to 48 will only make the file size
larger and can't improve the audio.
Doesn't FCP or FCE import your file at 32. Or does it
change it to 48 after import?
I am aware that increasing the audio from 32 kHz to 48 kHz will not improve the quality of the audio. And yes, Final Cut Pro and Express will both capture and allow you to work witih 32 kHz audio.
I have several hours of video shot with 32 kHz audio settings that I'd prefer to have stored on disk with 48 kHz audio, because (a) some applications like iMovie have demonstrated problems with 32 kHz audio in the past, and (b) the majority of my video is shot with 48 kHz audio, so my 32 kHz video will eventually end up in a 48 kHz project, leaving the upsampling to Final Cut. Yes, I do eventually plan to burn my projects to DVD as well, but this isn't an immediate concern.
The problem with doing the conversion in Final Cut is this: Some of the people knowledgeable about Final Cut Pro and Express recommend doing the upsampling using Quicktime or another application, instead of using Final Cut, because Final Cut may not do as good a job as Quicktime. So my intention is to upsample the audio now in preparation for later projects. I don't completely understand why Final Cut wouldn't do as good of a job at upsampling, but a couple of experienced users in the FCP and FCE forums have independently corroborrated this.
Thanks to everyone for their helpful posts and responsiveness.
PowerMac G5 Quad 2.5 GHz 3GB RAM Mac OS X (10.4.5) NVIDIA GeForce 7800GT
Message was edited by: Anthony M Kassir MD

Quicktime Player screen recording: 720p video is appearing as 480p max in Youtube

So I did a screen recording in QuickTime Player, after trimming I saved it to 720p in QuickTime Player. When I uploaded it to Youtube though, the max resolution I can select in the resolution options is 480p, so it's not as clear as my original.
I check the original video file and the resolution is 1160x648. So the video screen I selected to record was a bit short of 1280x720. Is that why YouTube downgraded it to a 480p video? Selecting an exact 1280x720 rectangle with QuickTime Player isn't possible for me. I can overshoot I guess and let QT player shrink it to 720p? Or is this some issue with Youtube and the mov file format from QT player?
To save me sometime, does any know how I can upconvert my mov video to the necessary resolution and/or format Youtube needs to support 720p playback at least?
Setup:
OSX Yosemite 10.10.2
QuickTime Player 10.4

This feels like there is some sort of error during save but I was wondering if a) anyone had experienced this or b) knew of a fix.
1) Have used the screen capture option in the past to, more or less, test how it worked. Unfortunately, my Snow Leopard system is currently tied up batch processing files so I can't re-check things at the moment.
2) How long are captures and how much time are you allowing between terminating the recording and forcing the application to quit? If I remember correctly, this is a 2-step process. In the first phase the screen is simply captured to your hard drive. In the second phase, the data is converted to H.264 compressed video and written to the target file container. If you force the app to quit prematurely, the target file is never properly updated/closed leaving it empty and/or unable to be opened. As to the controls, they remain deactivated until all of the data has been converted/written to the target file or you force the app to quit. The amount of time required to create the target output file is, of course, directly related to the duration of the screen capture.
Suggest you try making a very short screen capture and see if the test file is successfully created. If it is, allow more time for the process to complete on its own with longer captures. If the process is not successful, try a similar test using a different user account to see if the problem is local to the user account or system wide.

FCP quicktime conversion export problem

issue exporting still image instead of video
FCP quicktime conversion export problem
within the last 2 weeks i have exported from FCP studio 7.0.3 as quicktime conversion, the settings are:
export as QuickTime Conversion:
> Options> quality> set to Best>
Standard Video Compression Settings
Compression Type: H.264
Motion:
Frame Rate: Current fps
Key Frames: Every 24 frames
check Frame Reordering
Compressor:
Quality: Best
Encodeing: Best (Multi-pass)
Data Rate:
Automatic
Filter… none
Size>
Dimensions:
NTSC 720x486 16:9
>ok
Sound: (don't change anything)
Format: Integer (Little Endian)
Sample rate: 48.000kHz
Sample size: 16-bit
Channels: (L R)
>Export
the results i get a odd. - the video exports fine, except for the beginning titles, instead a still frame image from somewhere else in the video occupies that intro, until the first transition- in this case- dip to white, then the rest of the video is fine. the portion of the beginning that does not show are composed of: livetype text credits in V2 - in which i have done a manual opacity fade up and down - so the livetype text fades in, over matte color solid in V1. in the exported video -i do not see any of this, all i see is a seemingly random still from somewhere else in the video. i can however hear the audio as it is supposed be.
cant figure out why this is happening. anybody know?
i think the livetype files are 1920 x 1080.
my FCP sequence is 720 p
this has only recently started happening and doesn't seem to be consistent.
im wondering if it has to do with the live type files, or the white solid?…
or the conversion settings above?

Alistair
Earlybird is exporting H264 ... the Key Frames setting is determining the GOP length. This value should really be determined based on the complexity of the video, to my understanding, the actual frame rate has no bearing on it. If you have very complex fast moving content then a low Key Frame rate is advisable to ensure good image quality (although it will adversely affect the filesize) whereas if you have slow moving or static content (like an interview subject) then a higher Key Frame rate will still produce a good image but at a smaler filesize. The default of 24 should be pretty much fine as a catchall starting point.
Earlybird
Corrupted render files (and render references) can be a pain because FCP will use those files and references in place of the original media when building the export. And so it should as it does't want to waste time re-rendering sections that are apparently already rendered. Unfortuantely, as noted, if the render file has gone bad and/or starts referencing the wrong media then you'll get these wierd flashes of completely unexpeced and unwanted footage showing up where it shouldn't be. When you trash those files then QT / FCP will just go back and re-reference the original media ... so it's usually a worthwhile step to take just in case thats the problem. The worse case scenario is that it only that doesn't work and you spend some time unecessarily re-rendering.
As to why these files go bad? That I don't know. Why do Preferences get corrupted? That I don't know either but it definitely happens :-(
Cheers
Andy

Import Problem with FCP quicktime file.

Hi,
I exported my 18 minute video with FCP quicktime (instead of quicktime conversion I did export quicktime video in FCP). When I try to add this video to DVD Studio Pro, The first thirty seconds of video import and all the sound imports but no video imports after that first 30 seconds.
Does anybody have any idea what this is?
Thanks!

Sounds like a corrupt file. You should try opening it in QT and then saving it out with a different name if it works OK there. Be sure to make a self contained file, not a reference file.
However, you may find it better to export from FCP through to Compressor and create your MPEG2 files there before bringing them in to DVDSP. This is a better work flow for lots of reasons, ensures you use a dedicated encoder and releases DVDSP to concentrate on what it does best (which certainly isn't the encoding, IMO!)

Producing movies for PAL as widescreen 16:9

Hi all
I have FCE 4/Quicktime Pro/iLife 09 and want to make my movies to play on my widescreen HD ready TV, however I seem to mostly end up with 4 x 3 movies, which is frustrating, as well as being a waste of discs. My camera is a Panasonic NV-GS75 using Mini DV tape with a widescreen facility which I have set it to. I have also tried using iMovie with XML export to FCE4.
What I would like is a sure fire formula to make my movies as widescreen for PAL which would use the whole screen, even with my TV being 1080 HD. I occasionally make wedding video's for friends which in the past I produced on iLife 06 but I want fancy transitions and to get it right before I ply for further trade.
Can anyone out there help !!!

Thanks Tom
I will give that a try. Do I also need to check the anamorphic tab on all the clips I use in FCE, or just the sequence, and what setting should I use in QT conversion to ensure the best quality for TV viewing ?
Sorry for so many questions !!!

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

A Quicktime plugin update is recommended for FF 3.6.4 on mac os 10.4 but no new version is available?

A Quicktime plugin update is recommended for FF 3.6.4 but for mac os 10.4 there is no new version? My current Qt-version is 7.6.4 am I missing something?
== When I updateted to FF 3.6.4

Does this only occur with 10.6.8? I just gave this a try on my 10.8.3 system with AIR 3.6 but couldn't reproduce the crash on quit. However, I also was unable to log into the application due to lack of credentials. Could you please open a bug on this over at bugbase.adobe.com? If we need to log in to reproduce the bug, please send any test credentials to [email protected] Once the bug has been entered, please let me know the bug number so I can attach the symbolicated crash log to the bug report.
Thanks,
Chris
Ps. If you haven't already, can you also try out our 3.7 beta build?
3/26/2013 - AIR 3.7.0.1410 Runtime and SDK Beta

Making master DVD from FCP Quicktime

Could someone please explain to me exactly what process, every step, I have to do to with my master FCP Quicktime movies in order to make a DVD master using iDVD? Its 4.8GB plus a second film of 2.4GB. Much appreciated!!!

Terry
You can start here:
http://www.apple.com/ilife/tutorials/#idvd
but, what do you mean with DVD master?
Besides that, the key factor is not the file size of your source movie but the total lenght in minutes. Why don't you uses DVDSP?
Hope that helps !
Alberto

Help! Bought a used iMac (2008) and I'm trying to install quicktime but its asking me for a password and has Apple in the "Name" spot. How do I retrieve or reset the password?

Can anyone help...
I just bought a used iMac (2008) from an ebay seller and I'm trying to install quicktime but its asking me for a password and has Apple in the "Name" spot.
How do I retrieve or reset the password?
It came with the upgrade of Mountain Lion but I cannot find quicktime in the applications. When I try to install anything this Installer Password thing comes up... so I'm stuck.

ShirlFromNC
I think you're slightly misunderstanding something, so maybe I'll try to chime in, even though everyone has said it in various ways.
Before OSX 10.7 (aka Lion) came out, the upgrades to OSX belonged to the Mac and not the user. Probably there was a technical legality in the user agreement that you couldn't do that, but everyone did. I could sell a Mac with Snow Leopard (or anything before that) by just erasing the hard drive, and reinstalling OSX. Then ship it to the buyer. Now, I was pretty honest as a seller, and including not only the original installation discs but also any upgrade. I would only sell a Mac if I was replacing it, so I always was getting the brand new version.
With OSX 10.7, upgrading was done online, with no disks. So the upgrades were tied to an Apple ID rather than the machine. Recently, I sold a MacBook Pro (to upgrade to a 27" iMac), which came with Lion. I had promised the buyer that it would come with Mountain Lion, but I didn't know that the upgrade was tied to my Apple ID. I made good with the buyer by sending along a $20 Apple App Store card so that she could upgrade to Lion.
So what everyone is saying here is that you need the original Installation discs or Snow Leopard disk to reinstall and wipe out the Mountain Lion that is on your Mac. It doesn't belong to you, it belongs to the seller, and without his Apple ID and password, you cannot use it. Once you do a reinstall of Snow Leopard, then you can upgrade to Lion and then to Mountain Lion. I do not believe you can upgrade directly to Mountain Lion from Snow Leopard, but I'm not sure.
If the seller claimed that you were getting Mountain Lion, then he was lying to you (or being more civil, maybe he just didn't know like I did). If you bought the used machine from Amazon Sellers or from eBay, then you have recourse through the feedback system or through PayPal. If you bought it any other way, you're on your own.

FCP & QuickTime DvcPro HD Digitizer 720p 25 for PAL Big World Missing!!!!

Similar Messages

Maybe you are looking for