FCP S2 wont start after archive and instal.... Please help

Hi I have been on the imac forum with the first half of this problem. Ill start from the beginning to give you some background.
I did a routine apple software update and when restarting my computer it got stuck on the blue screen and would go no further. After trying everything I had to do an Archive and Instal. This worked and I can now fully boot up.
However, after this process my FCP S2 will not work. When I click on any of the FCP S2 icons, they bounce and nothing else happens. It does not matter if I do this from the apps folder or on the desk top. The strange thing is that DVD Studio will open and works like normal.
Is there anything I can do to get my FCP S2 programs to work again and if not how should I go about reinstalling so I will not lose all my projects. What is the proper procedure for deletion and reinstallation.
Thanks so much for your time

The Previous System folder is just a folder. OS X just treats it like any other folder, so Final Cut Studio isn't technically installed. You don't need to necessarily remove it, although the purpose of performing an Archive and Install is so that you can retrieve files from the Previous System folder before removing it permanently.

Similar Messages

FCP Studio 2 wont respond after archive and instal... please help

Hi I have been on the imac forum with the first half of this problem. Ill start from the beginning to give you some background.
I did a routine apple software update and when restarting my computer it got stuck on the blue screen and would go no further. After trying everything I had to do an Archive and Instal. This worked and I can now fully boot up.
However, after this process my FCP S2 will not work. When I click on any of the FCP S2 icons, they bounce and nothing else happens. It does not matter if I do this from the apps folder or on the desk top. The strange thing is that DVD Studio will open and works like normal.
Is there anything I can do to get my FCP S2 programs to work again and if not how should I go about reinstalling so I will not lose all my projects. What is the proper procedure for deletion and reinstallation.
Thanks so much for your time

backup project and all other work files
clean install Mac OS (this wipes the hard drive clean)
install from installation discs FCP Studio
reinstate the project files

FCP won't launch after Archive and Install

After the fiasco of the 1.1 update for the Alu-iMac's I had to do an archive and install on my system to return it to 1.0.
Everything is now working fine but FCP6 won't launch. It bounces in the dock once and then nothing. LiveType and DVD Studio 4 will open but Color, Motion and FCP won't.
I have trashed preferences and repaired permissions with no luck.
Any ideas?
Thanks in advance.

There are files that are not brought along with Archive and Install.
Some are invisible and not accessible without enabling "root" access and even then you have to know exactly which files have to be moved from the 'previous System' folder.
Archive and Install never works with Apple's Pro apps.
If Niel's suggestion doesn't work you'll have to erase your hard drive and reinstall everything making sure you first backup important data to another hard drive.
(don't forget to save your mail and addresses)

Finder not responding after Archive and install

I recently encountered my first problem ever with my mac(new in '05) This is the first mac I have owned; I have worked on G3's and G4's in the past. After reading through many message boards and support pages I don't believe my problem to be similar but different to previous posts.
My problem started off with an OS problem that I was able to diagnose in the "help" book I purchased when Leopard came out. It said I should Archive and Install to remedy the problem and keep my files. I ran the archive the install (it gave me no options to preserve user or network settings). After Archive and install my computer started up alright, but I got the permanent beachball and the finder does not work. it is constantly non responsive. I can relaunch finder, but after it restarts it goes non responsive immediately once again. So I can't actually access my "previous system" folder to move anything over. I checked my dock items and finder, they opened, but my itunes asked for an update. I list of update items came up; I did the non-restart items first. they updated fine, (my itunes old itunes playlists are viewable but not playable now) then I did the items that required a restart. That is when I found out that I could not shut down or restart my computer with std. procedures.
Currently I can only access my spotlight or apple pull down menu if I am in a functioning dock program (safari or itunes, quicktime. etc.) after reading some more support pages it looked like the common thing to do was check permissions and verify disk. I did, I repaired two permissions and the disk was OK. I did look at the HD files, they were as I remembered, but unaccessible (greyed out) and the "previous system" folder was present. +It didn't look like I would expect. The HD looked same as it used to just with a previous system folder.+ After checking the permissions and verified the disk I tried a hard restart. It came back the same as before, unresponsive finder and only the few dock items worked along with spotlight. I checked permissions and disk verify again and everything was OK.
Sorry to be long winded I am trying to be thorough...In short, My finder does not work after doing an Archive and Install to fix my original problem (which has been fixed)...the remedy for an unresponsive finder is to do an archive and install. Is another archive and install really going to fix my problem? Can I archive and install OSX 10.4 and work my way back up to 10.5.6?
Secondly is there a way to restart my computer without doing another hard restart?

It won't let me add a new account. I am locked out and when I try to unlock it gives me the beachball and becomes non responsive after it tries to authenticate.
I looked at the log file, I am not sure what exactly to look for. I am no programer. I see an awful lot of negative wording. I see some errors like "error (-4956) locating menu extra but they are mostly under system preferences...I see some stuff in the loginwindow that says is not a full path... Otherwise, the only reference I see to the finder is when I have force quit the finder.
2/8/09 8:59:55 PM com.apple.launchd[114] ([0x0-0x4d04d].com.apple.finder[304]) Exited: Terminated
2/8/09 11:10:17 PM com.apple.launchd[114] ([0x0-0x57057].com.apple.finder[321]) Exited: Terminated

Where is mail stored after archive and install?

Hello All,
I need to know where my old mails are stored after archive and install. To give a bit of background... This is a work computer. Its a MacMini which came with 10.4 installed. Before I joined the company boss upgraded to Leopard and thats what I have been using all this time. Recently it blue screened and I had to do an archive and install after trying various other options.
I only had the original install discs with 10.4 in them and not the Leopard discs. Since I needed to my computer up and running, I used those discs and did an archive and install.
I have all my old documents, etc but I couldn't open mail from the previous systems folder because its a different OS.
Is it possible to retrieve my old emails without having to install Leopard again?
Any help is appreciated.

When I started the computer up, instead of the login page with the account names coming up, there was just a blue screen. There are lots of articles that gave suggestions to try but nothing worked so I had to archive and install.

Cd inserted but unrecognized after "archive and install"

After "archive and install" OS X.2 and clicking on "save settings", everything works fine, except sound cds are not recognized when inserted. iTunes works fine with the original files on hard disk, but doesnt see the cd (it did before).
I repaired permissions. I deleted the "previous systems" folder. still nothing.
I did notice that the "previous systems" folder has an "audio" file in it but the current "system" folder doesnt. I tried copying this audio file into the current "system" folder but I get the notice that it cant be changed.
I need to hear cds on this computer. Any ideas?
(It isnt a speaker problem as the itunes files play fine).
John in Vancouver

Hi John in Vancouver! And Welcome To
Discussions!
Open System Preferences > CDs & DVDs.
Adjust the appropriate setting there, and see if it
helps.
Good Luck!
ali b
Thanks, ali, but I did that early on. Didnt put it in the post. On insertion of a CD I have it set to open iTUnes.
I found a further problem which is that the midi set-up no longer locates my external keyboard. I will check the discussions under audio for this one, however. (I did check about the CD problem in the audio discussion but nothing there.)
John

Recover mail after archive and install

Hey there good mac people,
I recently archived and installed on my ibook g4. It was successful, my problem is that I forgot to backup all the mail I had in my osx mail app.
The previous system folder (library<mail<mail accounts<com.mac.mailaccounts<English.lproj< file, but I don't know if this will help restore or not?
Some of the mail is still on the server, but it is set to delete from the server once a week, and thus only a weeks worth at best is still on the server.
Does anybody have any suggestions?
In the future, what's the best way to back up mail?

Hello art-is-work.
I don't understand your problem. Archive and Install should have preserved all your data, unless you told it to do otherwise. Did you?
Mail stores most preferences and all account settings in ~/Library/Preferences/com.apple.mail.plist. Everything else, including all your messages and mailboxes, is stored within the ~/Library/Mail/ folder.
If the problem is that you told the installer to not Preserve Users and Network Settings, then Archive and Install should still have saved a copy of your entire home folder in /Previous Systems/Previous System N/Users/, where N is a number. The old Mail folder and preferences file should be there. You can just copy them to the appropriate location of your current home folder, or follow the somewhat convoluted procedure described in the following article to safely restore them:
How to get files from a previous home directory after Archive and Install (Mac OS X)
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder.

I need help to recover/relink mail after archive and install

I am helping my friend fix her 15" G4 PowerBook after memory failures caused many crashes. There was no recovering short of a reinstall via "archive and install". All that worked great, but now Mail doesn't recognize the accounts, mailboxes, signatures, etc. that are still located in the user/library/mail folder.
What's up with that? I can't figure out how to relink Mail to this stuff.
Here's more detail:
1) After lots of prior debugging (Disk Utility, Disk Warrior, Apple Hardware Test, single-user commands per Apple tech notes), I did the A&I to 10.3.4 from the original disks.
2) Per Dr. Smoke and The X Lab, I ran the 10.3.9 combo installer right away so that the "older" system would not get confused by the "newer" stuff in the Previous Systems folder.
3) I Launched Mail and it started anew, i.e. didn't recognize accounts and wanted to start over.
Thanks for any help.

The account settings are stored in HOME/Library/Preferences/com.apple.mail.plist. It looks like that file became corrupt -- maybe its permissions went awry (Disk Utility cannot fix that) and Mail just deleted the file to create a new one.
If your friend doesn't have a backup copy of that file, just set up the accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don't. Just enter the account information and Mail will automagically rediscover the data in HOME/Library/Mail/ when done.
You'll also have to re-configure most settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it's enabled.

Blank iTunes library after Archive and Install

My PowerBook G4 suffered a catastrophic crash and after advice from Apple support, the only way I could restart it was to perform an Archive and Install. Before this, I couldn't start the machine and therefore couldn't back anything up. Everything seems to be all right after the Archive and Install except that my iTunes library is completely blank, and the old library is not anywhere on the hard drive. All of the songs are still on my iPod - is there any way to get them back into the library? I don't want to connect the iPod and lose everything I have now.
Thanks!
PowerBook G4 867 Mhz Mac OS X (10.2.x)

From the Keyboard Shortcuts in the iTunes Help menu:
iPod shortcuts
Prevent iPod from automatically updating when you connect it to your computer
Command-Option as you connect the iPod to your computer (hold the keys down until the iPod appears in the iTunes Source list)
After that, use an application like Senuti or iPodRip (latest versions on versiontracker.com) to transfer the contents of your iPod to the computer.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.6) Several ext. HD (backup and data)

Video podcasts won't play after archive and install

I'm one of the folks having capture issues with FCP 4.5 and OS X 10.4.9. So I decided to archive and install to 10.4.8. Now it seems I'm having all kinds of video problems, including downloading and playing video podcasts in iTunes (7.2). When I download a podcast, say "Tiki Bar TV", the file downloads, but in the podcast screen, I get an error message which reads,
"There is a problem adding the video to iTunes. The file might be corrupted, or a file type that iTunes cannot play." For the record, I have never run into anything like this before. And it's the same way with every video podcast.
I had some similar wonkiness going on with QuickTime, too. But after I installed a divx plug-in, and flip for mac, everything seems to be okay with the QT. iTunes is still a mystery. Any ideas on what my next step should be would be appreciated.
Thank you.
Ben
PowerMac G5 Dual 2.5Ghz Mac OS X (10.4.8) 3GB RAM, 500GB hard drive, ATI9800XT

There are files that are not brought along with Archive and Install.
Some are invisible and not accessible without enabling "root" access and even then you have to know exactly which files have to be moved from the 'previous System' folder.
Archive and Install never works with Apple's Pro apps.
If Niel's suggestion doesn't work you'll have to erase your hard drive and reinstall everything making sure you first backup important data to another hard drive.
(don't forget to save your mail and addresses)

I Lost Parallels After Archive and Install

I posted this on the Parallels Forum, and although it was viewed 59 times, there were no replies. So I'm posting it here hoping that someone can/will answer my question. Here's what I posted:
My OS X (10.4.11) became a little quirky after three years so I did an Archive and Install. Now I can't get Parallels to start up my Windows XP virtual machine. I get the error message "Parallels Desktop is unable to operate properly since it cannot communicate with one of its drivers ... re-install Parallels Desktop." I have my original Parallels 3.0 installation CD so I suppose I can figure out how to do this. (My iMac was purchased with Parallels pre-installed.) Do I need to uninstall before I re-install? I have on my desktop the Parallels alias labeled "Microsoft Windows XP.pvs" plus I have in Applications an alias labeled "Parallels Desktop". If I need to uninstall, can I just drag these two to the trash? I am not adept at this sort of thing, so I need some guidance. Thanks.

Hmmm...good question, I'm not sure. I believe all you would have to do is be able to at least bring up the Parallels Window and have at least "Paralells" recognize still that there is a virtual machine there, not necessarily be able to get into it. Can you at least pull up the parallels window and/or box that you would normally pull up to list your virtual machines? If you cannot do at least this, then you're probably stuck re-installing Parallels. But please remember to back up your virtual machine file in another area like an external hard drive before you do the re-install. Installing and un-installing parallels is NOT SUPPOSE to mess with your virtual machines, but I wouldn't bank on it. If you can at least bring up that Window/Box, then you could use the are listed on the box to re-install the Tools. Hope it works out for ya.

Spell check issue after 'archive and install'

hi,
after doing an 'archive and install', the apple spell check doesn't work no more. whatever program i use with the spell check activated will give me a failure notice as soon as i start typing "spell check could not be detected" (or sthg similar, i get the message in german). the result is a close-to-freeze of that program until i 'okay' the notification.
anybody an idea how to properly (re-)instal the spell check so that my OS recognizes it?
thanks and greets!

Get Pacifist...
http://www.charlessoft.com/
then extract what you need from your Install Disk.
Or try reinstalling like the last big Combo update...
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions afterwords, reboot.

After Archive and Install = computer running slowly

I just ran Archive and Install, repaired my Hard Drive with disk utility and ran software update, everything should be gangbusters.
But now, it takes much longer than usual for my computer to boot and when I do basic things like run a web browser, the finder and itunes at the same time, I get a 'pinwheel of doom' consistenly as if the computer needs to stop and process what's going on.
Why is my computer running so slowly? I have enough ram, processing to run very smoothly and my hard drive now has 15% free space.

After I started a new user and used some of my old programs in that user, they loaded faster on the admin user I've been having problems with, and it seemed like my computer was starting to go back to normal.
New problems... I ran software update and there were a bunch of security updates, quicktime and other stuff I hadn't updated. It took a while to download and install so I left my house for a few hours. I came back and my computer showed the "restart to take effect" prompt. But then it wouldn't boot to OSX and I'm back to square one. Why would this keep happening? Why would my OS stop functioning after leaving it idle for several hours?
So now I'm re-installing the OS again and we'll see what happens.
Could it be that the climate is too hot? I have a thermometer program that says the inside of my computer is 135 degrees F. Is it too hot? Maybe a fan is broken?
In the past my OS has only stopped working due to lack of HD space but now I have about 15% free space. I'm really out of ideas here.

Can't open Virtual Machines after "Archive and Install" of Snow Leopard OS

Hi all,
Please bear with me while I provide a bit of background info for my issue:
I just installed a copy of Adobe Photoshop CS5, during which I was actually forced to archive and install my Snow Leopard because of an installation error. So, I inserted my Snow Leopard disc and let the OS X installer do its thing. I remember, somewhere along the way, an admonishment that this process may somehow corrupt any virtual machines that may be installed, but throwing caution to the wind, I went ahead anyway.
Well, turns out it did indeed corrupt my installation of Parallels 6 somehow, and now none of my VMs work. When I open Parallels, and select File -> Open, then select whichever VM I want, a screen flashes so quickly I can't see it (I assume it says something like "Opening XYZ Virtual Machine"), and then.......nothing.
Thus far, I have tried to uninstall and reinstall Parallels 6 (using the KB article that directs you to delete a bunch of files via Terminal after running the packaged uninstaller) and I deleted my VMs and restored backup copies of them from several months ago.
I'm now at a loss - any ideas what I can do to get Parallels to function again? I don't know if somehow permissions were modified, or if there are any other particulars that the reinstall of Snow Leopard may have made to cause parallels to be unable to open my VMs.
Appreciate any advice in advance!

I think I would look at if you have the latest Parallels;
clone and backup your system and files before doing anything;
boot off 2nd hard drive and run Apple First Aid + (Disk Warrior or DG3 or TechTool Pro 5).
Always be prepared to be able to restore your system to prior point, that could even mean keeping 10.6.4 around for a month until you know 10.6.5 and 3rd party software and drivers all play nice together.
Bottom line: invest in two backup sets and methods; a copy of SuperDuper or CCC; and Disk Warrior.
I've used VBox, Fusion but not Parallels, plus Windows XP Mode, VHDs and VMs under Windows Vista/7.
I'd go back to ERASE and INSTALL and then do all your updates, then start on 3rd party with main packages first (CS5 and others). Off load, save, backup everything and anything you might need first of course.
Last but actually #1: a small 30GB OS X 10.6.5 drive volume (can take the 30GB from one of your backup drive is fine) so you can run the latest DU plus other system maintenance (DVDs get old, out of date, slow to boot, can't use Finder and other programs).

Files missing from library after archive and install

Hi forum folk
any help you could give would be much appreciated.
I can't seem to verify my permissions on HD. I have run disk utility both from finder and from my OSX startup disk and consistently get the error message "Disk Utility has lost its connection with the Disk Management Tool and cannot continue." I then reinstalled the operating system all together making sure to archive and install as well as archive previous network and preference settings. This means I am running 10.3.4 at the moment (and I can't verify any of the software updates at the moment). After reinstalling I still cannot verify my permissions, so now I am trying to back up all my files so that I can reinstall the OSX again, erase everything, and start from scratch. But I'm running into some very strange problems while doing this. select files are missing from ~/library. there is no Safari file, for example. I tried looking in HD/previous systems/library where my library files were saved before I reinstalled the operating system but there is no such folder in there either. this means all of my bookmarks are gone. additionally, under library/preferences (in both the old and new library folders) there is no file named com.apple.itunes.plst. so all of my itunes playlists are gone as well. these are the only missing files I have found thus far and i can't explain why they selectively would not have been saved after the archive and install. Everything else seems to be intact. Any ideas?
thanks
jb
powerbookG4 Mac OS X (10.3.9) running 10.3.4 at the moment - can't verify permissions on 10.3.9

jbeep:
my HD has a capacity of 8.85 GB available. When I reinstalled panther I had little more than 3 GB available (I deleted a bunch of unneeded things since then)
Thanks for this update. What is the total formatted capacity of your HDD? I ask because I suspected that you might be cutting it pretty close. The rule of thumb is that you should have 10-15% of your total capacity available as free space. My personal rule is 15%-20%. This allows for more efficient perfomrance of OS X.
I am in the process of backing up everything on my seagate combo USB 2.0/firewire 200 GB external (I am using the firewire cord)
Having an up-to-date backup is one of the primary rules, often observed more in the breach than not. Since you have an HDD that supports Firewire, I suggest that you make a bootable clone of your entire HDD using SuperDuper. You can then use this backup as an emergency boot drive. However, it must be Firewire, as PPC Macs don't boot from USB devices.
I also have heard that it is advisable to reinstall the OS "every now and again" and I hadn't done this for at least two years. was I ill-advised?
Most experienced Mac users never re-install, except under dire circumstances. Since installing my new HDD in this computer I have never re-installed. Re-installation is the utlimate intrusive measure, and it exposes one to all kinds of issues, from lost data, to flawed installaton, to installations that fail midstream. Re-installation is not an effective maintenace procedure. Here are some helpful links in terms of maintenance:
Mac OS X 10.3/10.4: System maintenance
Macintosh OS X Routine Maintenance
Maintaining OS X.
I'm going to restart now and try and verify my permissions again using the procedure on the above link. I'll let you know what happens.
Instead of verifying permissions, just go ahead and Repair Disk Permissions. Verifying permissions does nothing, and wastes your time, as it is difficult to tell whether you need to repair, and you have to repair anyway.
Do post back with an update of your progress and any further questions or comments.
Good luck.
cornelius
Message was edited by: cornelius

FCP S2 wont start after archive and instal.... Please help

Similar Messages

Maybe you are looking for