Fcp scratch problem. can't open a file?

fcp7 project was created on an external drive, put onto my desktop. Will not open
Says one or more ot the scratch disks does not have readwite access.....i don't know what to do

Similar Messages

Big Keynote Problem - can't open saved file

Hello
After spending a whole morning working on a presentation, Keynote '08 suddenly quit, with the normal message. Now the file I was working on will not open, no matter what computer (we have three in the office) or what I do. I have searched through these and other forums looking for help, and have tried everything I've come across (opening the package, deleting .plist, etc) but still no joy.
Keynote can open every other file I've created in the past without issue. I'm not sure if it affects anything, but this file was a ppt file which I opening in Keynote and edited, then resaved as a Keynote file.
If anyone could help it would much appreciated.
Thanks in advance.

On Mon, 12 May 2008 20:41:25 -0700, [email protected] wrote:
> Well I tried . I saved another file before the big project and named it
> also with a date . After I realized I can`t open my big file I paniced
> and tried to open it no matter what . So I rigt clicked on my file and
> changed the opening program to photoshop . It didn`t help . After a few
> minutes I realized I could just have renamed it and put .psd after the
> name . So I first tried it with the smaller project and it worked . But
> nothing cahnged after I tried to do the same with the big project . I
> believe it`s because I had changed the opening program of the big but
> didn`t touch it on the small project . Is there another chance to open
> it ?
I would try Open As, and see if it's a tiff, psd, or other format.
If the file's not too big, put it up on a server and some of us can try to
open it. Or email it to me mike - at - curvemeister.com
Meantime, put on a new pot of coffee and start doing the work over again.
All of us wind up doing redos for one reason or another, and you'll be
surprised how fast it goes the second time.
Mike Russell - [advertising link deleted]

Photoshop CS6 problem - can't open new files

I have been using Photoshop CS6 (Windows 7) for a while now, and it has been working fine. However for two weeks or so I am having constant issues opening existing, or new documents.
I can either drag a picture, or File>New several times and nothing ever happens.
The only time it works, for maybe 15 minutes, is after I restart the computer.
This issue needs to be fixed! I have been looking through threads with the same problem and no one from Adobe has given a solution! And my version is original, through Creative Cloud.
What is there to do? Can I contact someone from Adobe personally to fix this? I am paying for Creative Cloud monthly, Shouldn't there be some sort support for this?
Also I have had the IT manager look into my computer and there is nothing wrong with it. Everything update, functioning smoothly. This is stricly an Adobe issue.

Well, the bad news for you is that this is very likely something outside Adobe which we can't fix for you. From the sound of it you have a "security suite" running amok that is blocking access to temporary files, the clipboard and specific features that allow Windows apps to interact liek that drag&drop stuff. If this is the case, get rid of whatever this tool may be. It's rubbish if it behaves that aggressively and interferes with normal operations. Otherwise check for generic permissions/ user privilege issues that may trigger security stuff plus verify your hardware. Come to think of it this could be a ahrrdrive on the verge of imploding on itself and preventing the system from functioning right because temp files no longer can be written in damaged sectors. Check disk health, defragment, remove unused temporary files and back up your data before it crashes completely and goes *poof*. And finally of course reinstall your Adobe software just to be sure.
Mylenium

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

Garage Band Problem: I can not open my existing files on Garage Band. They appear in a light gray. I can only open recent files. How do I open the existing files?

I would like help opening my existing files in Garage Band? I recorded 22 songs earlier this month which I want to edit, but I can not open these files.
The only files I can open are the more Recent files.
Please advise me what to do?
Thanks,
Bonnieta

It's not an apple solution but you can try MailRaider by 45 RPM software. I have not used it personally but it was one of the hits that came up when I did a google search for .msg on Mac.
Hopefuly the link posts but if not then just head over to macupdate and do a search for MailRaider
http://www.macupdate.com/app/mac/31845/mailraider
Hope this helps.

I can't open any file

Hi every one,
GarageBand does not open any file.
From starting screen
if a double clic on any of my previous song i get an error message
impossible to open you file ..
Even if i can create it a few minutes before ..
as soon as i record it ..
i am unable to open it any more ..
i always get this error message
"can't open your file"
Has anyone an idea about what to do to fix this strong bugg ??
Thank you so much for your help

How many programs do you have open. Usually your machine will use the disk as scratch memory, but your program may be needing internal memory and it may not be able to address it. Close some programs backwards as to how you opened them and see if you can free some memory. If you still have a problem, I would close everything and restart opening that program first. Jerry

Can't open CR2 files in photoshop and camera raw

This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well.

OneNote recordings "We're sorry, we can't open the file because it is in use by another program."

Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.

A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek

Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name:    APPCRASH
Application Name:    AcroRd32.exe
Application Version:    11.0.10.32
Application Timestamp:    547e9779
Fault Module Name:    StackHash_147f
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c000041d
Exception Offset:    77a011f1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    147f
Additional Information 2:    147ff66574b08dc93180d912e60eb897
Additional Information 3:    c48b
Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Can you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

Error message: "Dreamweaver can't open .jpg files"

I'm using DW 8, and I have installed the 8.0.2 update. I'm
having trouble inserting certain JPG images into a site. I get an
error message pop-up that states "Dreamweaver can't open .jpg
files". It will allow me to insert some jpg files, but not all of
them. I've tried drag & drop and going through the Insert menu.
The files are not large at all. Doesn't appear to be any problem
with png's or gif's. It's incredibly frustrating. Anyone have any
suggestions? TIA.

> why was i taught that all my web images need
> to be in 72dpi if it doesn't really matter?
most people suggest 72 because it was an old standard with
the early
macintosh DTP programs. For web use it's easier to
standardize on it because
when you make an image, you have to put ~some~ number in the
resolution box
and it might as well be 72 as any other number. It simplifies
moving image
files around in different applications if they are all the
same resolution.
For display in a browser, these will all have the same file
size and display
size in a web page:
600x600 pixels at 1dpi
600x600 pixels at 72dpi
600x600 pixels at 6000dpi
It's when they are used in other applications or when a
direct url like
/photos/1.jpg is printed out that they may display in the
resolution, not
the pixel dimension.
I came across a page once where the designer always saved his
images with a
resolution of 6000 dpi or some other odd number because he
thought that if
people dragged the image off the page to save it- most of
them wouldn't be
able to resize it. or some other idiot reason maybe.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Satellite Pro P300 - After Truesuite update I can't open protected files

Hi,
sorry for my bad english but I came from Italy and here we don't have any forum who can resolve my problem.
I've got a Toshiba Laptop pro P300 with fingerprint reader. I use fingerprint to logon and protect some files, just for curiosity, it seemed cool...:|
The problem born when I recently update "truesuite access manager". Since I did the update I can't open protected files, I didn't read that I have to remove the protection before the updating (damn...), but these files are important for me and I have to open them again.
To resolve the problem at first I restore the system before the date of the update, to have the old version and open these files again, but all my fingerprints are deleted and I can't create new fingerprints because the pc says that it "can't open the sensor". I don't know what it means.
I thought that it needs some drivers, so I reinstalled truesuite access manager several times, I reinstalled BIOS, I've done the scan disk and the toshiba diagnostic, but the sensor still doesn't work.
I think that if I can save a fingerprint with the old version of the program I will able to open protected files again (and I will not protect them anymore) because only the old version of the program knows how to decrypt these files, but I don't know how to turn the fingerprint sensor on. Someone could help me, please?
Thank you so much!

The Truesuite update come from the Toshiba website. I can open the Truesuite program with my fingerprint but I can't decrypt files because it says that I don't have the correct "key of protection" or the "protection code keyAC 3000" of the file.

Can I open psd file made in photoshop cs3 with photoshop ps2?

Can I open psd file made in photoshop cs3 with photoshop ps2? Thanks in advance!

Actually you can open a CS3 file with smart filters in CS2
the only problem is CS2 will not understand the Smart filter and flatten it.
If you leave the smart filtered object alone in CS2 save the file and it should still be a smart filtered object in CS3

I can't open PDF files with adobe flash player

I have installed it and whenever I try to open pdf files it says I need to agree with your liscens and you do that automatically when you download it. I have followed all your instructions on your website and uninstalled it and installed again, but I can't open pdf files with it. I don't know what the problem is exactly, but it's really frustrating..

Flash Player CANNOT open PDFs because they AREN'T Flash Documents.
Adobe Reader opens PDFs.
To accept the license agreement (NOT the one you accepted to download or install - the one for USE)
Windows:
Go to: C/Program Files(x86)/Adobe/Reader 11.0/Reader and double click the eula.exe file. The license agreement will open for you to accept.
Mac:
Go to: Mac HD/Applications and double click the Reader app. The license agreement will open THE FIRST TIME you open it.

Can't open movie files in browser or email

Hi, I'm not sure if this issue has been dealt with yet; however, I can't open movie files contained in emails or in my Safari Browser--even ones labeled as QT files. I am running Quick Time 7.0.4 on my 10.3.9 eMac. This is a recent problem, as I didn't have this difficulty until the last month or so. I had unchecked the "Open Safe Files" box in Safari's preferences some time ago as a precaution against a virus/worm, but rechecked it after the last one or two Security Updates. What else should I do to resume opening movie files? QT Player runs just fine with movie trailers, etc, but not in mails or the browser.
eMac, iBook Mac OS X (10.3.9) 1 Ghz G4, 768 mb ram

Under the Safari Help menu choose "Installed Plug-ins". This will confirm your QuickTime install.
Under Safari Preferences/Security make sure you've got plug-ins enabled.
Try dragging the email attachment to the Desktop and see if it plays from there.

Can't open PNG files in Photoshop CS5...??

I'm seeing lots of threads with this problem but none of them seem to have an answer.
For some reason right now when I try to open a PNG file in Photoshop it just crashes. I end up with a neverending "hour glass".
I had all of my website project directories on a network share. As I'm no longer sharing all of these files with an office of people I decided to move all of these project files back to my own local machine. Ever since I've done that I can't open PNG files in Photoshop anymore.
Any information on what could have caused this, or more importantly, how to fix it would be greatly appreciated. Thanks!

I was able to edit PNG files just fine up until today, and the only thing I've done is move the files from the network share to my local hard drive.
Any PNG, large or small won't work right now. All of the other threads I see where people are talking about this say it's happening with their GIF files, too. I just tried one here and the same thing happened. From within Photoshop I did File -> Open, browsed to my image directory and the moment I clicked on one of the GIF files it locked up.
So yeah, I'm certain it's isolated to my machine right now. I just have no idea at all what could possibly be causing this. The other threads are mentioning netework shares, too, but usually still trying to open over the network. In my case it was working fine when I did it over the network, but now that I'm opening local files it's failing.

Fcp scratch problem. can't open a file?

Similar Messages

Maybe you are looking for