FCP Stops responding when exporting quicktime file still

FCP Fresh install and FCP Still fails to export quicktime file, stops responding.
I'm in the middle of a project, that really needs to be finished ASAP. Anyone out there have a solution to fix this problem, will be appreciated more than can be said.
Power Mac G5 Dual 2 GIG   Mac OS X (10.4.6)  

You know Lloyd, if this is a second thread about an old problem, you are really better off in the original thread. It allows us to follow along with the problem at hand, what has been suggested and what you have tried so far and the results.
Just off the top of my head and without searching for the original thread (I'm too lazy today,) I'm guessing you might have a corrupted file or render file.
Does it always stop at the same place? Where is your media stored? to where are you exporting? How much ram do you have?
Here we go, starting all over again...

Similar Messages

  • FCP stops responding when exporting quicktime file

    When exporting a quicktime file FCP 5 stop responding about 50% to 60% into the file.
    Have all the latest updates:
    In the middle of setting up for a DVD.
    Total media lenght is 01:58:30
    Thats why I'm segmenting it in to chapters so each file is smaller, average 10:00 to 15:00 minutes each.
    Any help is appreciated in advance, Thanks
    Power Mac G5 Dual 2 GIG   Mac OS X (10.4.6)  

    When exporting a quicktime file FCP 5 stop responding
    about 50% to 60% into the file.
    Have all the latest updates:
    In the middle of setting up for a DVD.
    Total media lenght is 01:58:30
    Thats why I'm segmenting it in to chapters so each
    file is smaller, average 10:00 to 15:00 minutes
    each.
    Any help is appreciated in advance,
    Thanks
    Power Mac G5 Dual
    2 GIG   Mac OS X (10.4.6)  
    writing the file to external direwire 800 drive as normal. In a folder I made for export. That when finished will be imported into Imovie for DVD export.
    Power Mac G5 Dual 2 GIG   Mac OS X (10.4.6)  
    Power Mac G5 Dual 2 GIG   Mac OS X (10.4.6)  
    Power Mac G5 Dual 2 GIG   Mac OS X (10.4.6)  

  • IDVD Stops Responding when Exporting from iMovie

    I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
    This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
    What I'm doing.....
    [1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
    [2] Edit the iMove project and add chapter markers and save project - no problem.
    [3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
    [4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
    [5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
    I have tried:
    Re-exporting the project from EyeTV
    Deleting the preferences files for iMove and iDVD
    Deleting the iLife suite and re-installing
    Doing an OSX archive and re-install
    Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
    Running Disk Utility - clean bill of health on both drives
    Repaired permissions
    The Console reports the following errors when exporting from iMove to iDVD:
    ===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
    [KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
    [KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
    [KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
    2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
    NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
    Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
    Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.

    Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
    What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
    Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
    Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on?

  • FCP not responding when Exporting

    I have now been trying to export a large project 2:10 Min from FCS3 I have tried for 2 weeks now and it still freezes or stops responding. I have trashed the preferences multiple times, now trashed the render files and re-rendered the file. There is no way to recapture this project or redo any of the footage. I used the old HDV tapes and now sold the camera to upgrade to DSLR. I am in need of some help ASAP.. I have tried exporting through compressor, through final cut, I have tried every way possible. And after it freezes it wont reopen unless I shut down and restart.
    I have 2.8 GHz Intel I5 8GB RAM -- all updates current.. thx

    Have you tried exporting the sequence without conversion? (File > Export > Quicktime Movie . . . )
    Is there sufficient disk space on the target disk?
    Is the destination disk formatted Mac OS Extended?
    Have you tried exporting your sequence in sections, by setting in and out points on the sequence? (This will help isolate if just one section is the problem. You can join these sections together in Quicktime Pro, if the movie exports correctly in smaller sections.)
    Have you used Disk Utility to verify and repair permissions on the target disk?
    Have you made a backup copy of your work in case something is wrong with your disk?
    MtD

  • Word stops responding when saving a file

    Each time I try to save a file, word stops responding.This is the problem detail (it's in Portuguese but I believe it can be understood)
    I need help.
    Thank you
    Nome do Evento de Problema: APPCRASH
      Nome da aplicação: WINWORD.EXE
      Versão da aplicação: 14.0.4762.1000
      Carimbo de Data/Hora da Aplicação: 4bae25b7
      Nome do Módulo com Falhas: oart.dll
      Versão do Módulo com Falhas: 14.0.4756.1000
      Carimbo de Data/Hora do Módulo com Falhas:
    4b9c0c53
      Código de excepção: c0000005
      Desvio de Excepção: 001c19ac
      Versão do SO: 6.1.7601.2.1.0.256.1
      ID de Região: 2070
    Informações adicionais sobre o problema:
      LCID: 1046
      skulcid: 1046
     

    Hi Clarasgp,
    Could you tell me which version of Office? Office 2010 or Office 2013? If Office 2010, you may install the security updates mentioned in the following link.
    http://support.microsoft.com/kb/2553091
    Since Oart.dll is not a system dll file, and is stored in the location of “[system drive letter]:\WINDOWS\system32”.
    We can try these methods to check if it’s helpful.
      1. Repair Office from Control Panel > Programs and Features > Office >Change > Repair.
      2. Download Office installation source from Microsoft website and reinstall it.
      3. Perform a clean boot in Windows to avoid conflict with other applications.
    If there is anything that I can do for you regarding this issue, feel free to post back.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Imovie '11 crashing when exporting quicktime file

    I want to export very short video clip from imovie11 with qtime to a 720HD at 60fps, but it keeps crashing... when I right click on the icon in the dock, it says that "application not responding". Is this normal because of the C2D macbook not powerful enough? Should I leave it alone for a few minutes to see if it will come back??? Haven't been successful exporting via qtime, but had success via export movie from imovie natively as 720p... What is the difference??

    Actually I have 6gb of ram now! LOL
    I was thinking of swapping the 2gb stick for another 4gb stick = 8gb ram. Because sometimes I use parallels desktop... but for my casual needs, I rarely max the ram. But I was able to finally do this, by deleting (actually just copy the imovie.plist file to the desktop) started imovie again like it was the first time, exported the video via quicktime and adjusted the settings. I was able to out put to 60fps/59.94fps at 720p. It took a while, but it did it! I don't know why resetting the plist affected it. But it worked!
    Now if I could just improve the quality!!! The original videos are so crisp! and sharp! but after importing and exporting, there is so much noise and huge pixels... I wonder what happen to the 720p??? (same thing happened to a 1080p video) Not HD! that will be another post... but if anybody has an answer now...I'll appreciated it very much

  • Flash keeps 'not responding' when exporting .swf & file WAY too big

    Hello!
    I am creating an animation using ActionScript2 on Flash Professional CS5 and whenever I try to export (or even test) my animation, the progress bar comes up but the progress does not move. Then after about a second the dreaded '(not responding)' appears at the top of the window and if you click anywhere it greys out closes it.
    If I leave it it doesn't export for ages (liteally like 3-6 minutes which is long for just exporting).
    It only has 280 frames and the .fla file so far is 9.96MB! Other animations I have made have had double the frames yet 5 times smaller a file.
    I have cleaned my registry many times (I thought that might be the problem or something).
    I DO NOT UNDERSTAND! PLZ HELP!
    Jerome

    Bump

  • Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?

    Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?

    First, go install the MacOS 10.10 updates - you should be on 10.10.2.
    I haven't heard of Photoshop not responding during opens and saves.  Does it stop responding while the open/save dialogs are visible, or while Photoshop is actually reading or writing files?
    10.10.1 did fix a crash in the open/save dialogs, but 10.10.2 still has some odd issues (mostly program errors coming from the OS code) in the open/save dialogs.

  • ITunes stops responding when I plug in my iPod.  I have updated iTunes to latest version, still crashes.  OS is Vista.

    iTunes stops responding when I plug in my iPod.  I have updated iTunes to latest version, still crashes.  OS is Vista. How do I fix this?

    Hm... Strange.
    I had reset the iPhone.
    I tried disabling the auto-launch of iPhoto, and...
    ...when I plugged iPhone in, it started to freeze iTunes, but after a minute or so, the iPhone started synching. I found this odd because I had disabled auto-sync (I press Sync in iTunes when I want to have it Sync).
    Now, of course, I do want auto-launch of iPhoto back on, since I like it for when I attach my digital cameras. I hope that when I set it back, it won't re-introduce the problem.
    The restart I did may have helped. I resist restarting because my wife's account is often open and she frequently leaves unsaved files up, so it is a pain to respectfully close out her work and then restart.

  • Premiere Elements 11 stops responding at Exporter Quick Time Host.Bundle. Can this be fix?

    I'm having a problem with my Premiere Elements 11 which has start happening recently. This problem occurs after I sucessfully open & close any of my projects in Premiere Elements 11. After closing Premiere and trying to go back on it when I want to use it again it stops responding when it reaches Exporter Quick Time Host.bundle. I have a OSX version 10.8.4 and QuickTime Player version 10.2. Does anyone know if this problem can be fix?

    The footage that's in the project that I'm working on is from 2 different camcorders. One is a Sony DCR SR68 with the video format being MPEG-2 video, AC3 and its resolution being 720 x 480. The other camcorder is a Canon VIXIA HF R10 with the video format being AVCHD and its resolution being 1920 x 1080.
    But here's the thing about the Canon camera. I got the videos from each other the camcorders into my computer by just copying the video files into a folder on my desktop. But here's the thing about the Canon camcorder, when I try to copy the videos from this camcorder I had to copy the whole folder which is named "PRIVATE" and the videos in this folder plays on the Quick Time Player.
    When I started my project in Premiere Elements 11, I imported all the videos I copy into my computer into my project by going to Add Media > Files and Folders. The videos from Sony camcorder were mpg. and the videos from the Canon camcorder were mts.
    I duplicated 2 of the videos from the "PRIVATE" folder by going into Quick Time Player > File > Duplicate. I imported these 2 videos into my project file the same way I did with the other videos. But I deleted the duplicated videos in my Project Asset panel yesterday when Premiere Elements was acting up.
    Plus, my Premiere Elements 11 opens up without any stops/not responding because of this whole Exporter Quick Time Host.bundle after I restart my computer. I don't want to keep doing this since it's messing up my work flow. And that's what's going on.

  • Dreamweaver CS3 stops respoding when I open file

    I have a problem with dreamweaver stopping responding when I try to work on a specific file. I can open the file, but once I click on the code dreamweave stops responding. This file is in my testing environment. An identical copy current is in use on the server and works. To resolve the issue I have tried the following:
    Coping the file to a new name, deleting the orginal and renaming the copies to the oeginal name - did not resolve issue
    Opening the file in notepad, coping the code to a new file in dreamweave, closing notepad, saving the code over the orginal file - did not resolve issue
    I am now rewriting the code under a different, but I would still like to resolve the orginal issue.
    Any suggestions.

    OK, I tried coping the file over line by line and doing some simple rewrite. The file was open as a blank ASP and saved under I new file name. Everything work until I closed the file. When I reopened the file I had the same issue as before.

  • Mixed fonts when exporting ePub file from InDesign

    I am an ePubs newbie and have been watching some of the training videos on Lynda.com and  tried creating my first ePub document today.
    I am having problems with mixed fonts when exporting the file and viewing on iBooks on an iPhone.
    I have a document with paragraphs of text to be in a regular weight and certain words within the paragraphs are to be picked out in bold. So I've used a Paragraph Style for the main text and then used a Character Style to pick out the bold words. Simple enough!!
    On export I am not embedding any fonts as I have unchecked that option on the export dailaogue. I have used the same font family in InDesign, but I cannot work out why I am getting both Serif and Sans Serif fonts displaying when viewing it on the iPhone. The main body appears in the Sans Serif font, but I have the bold character styles, subheads and even the numbers in the numbered lists are all displaying in a Serif Font.
    In iBooks I can change the display font (I have the choices: Georgia, Iowan, Palatino, Seravek and Times New Roman) and this affects the fonts which are displaying as Serif, but the main body font remains constant as a Sans Serif (looks like Helvetica).
    I would ideally like all the fonts in the document to display as Sans Serif with certain words, plus the headings and subheadings to be in the bold weight version of the same font family.
    I've tried this in CS5.5 and CS6 with the same results.
    Can anyone offer any suggestions please.

    Hi Steve,
    Yes, you are correct. It is Anne-Marie Concepcion's videos that I've been watching.
    I understand what you are saying about testing in other readers and I will be looking into that further. However our main task is to get some of our client's manuals and documents into a digital version that can be read on  Apple devices, as these are what are being used by their sales force.
    We have already produced some documents for use on the iPad and have used iBooks Author for that with some success. They have now asked about getting something onto iPhones, so we are now looking into the ePub format to do that. I realise that ePubs can also be used on iPads, but we would still be pushing the iBooks Author files for use on iPads as there is more interactive widgets that can be included. But the main ePub reader that will be used is going to be iBooks, so we are looking to get something to work in that App. Other formats may follow, but we are starting with getting something to work on iBooks first.
    I have tried viewing the file in Adobe Digital Editions as you have suggested and have to say that this displays the file in a way that is certainly more appealing, as the fonts are at least consistent. However, I understand from Anne-Marie's videos that ADE is rather basic and is only intended as a rough proofing device. Which is why I transferred my ePub to my iPhone and iPad to view in iBooks.
    As I have mentioned, I am a total ePub newbie. I come from a mainly print background and my knowledge of CSS and HTML is very basic. I have an understanding of the concepts, but I would always rely on developers to produce websites that I may have designed.
    You seem to be implying that it may be in iBooks where the issues lie and from viewing the file in ADE this would certainly look that way. So I am simply trying to establish what I would need to do to make it work in iBooks in a more satisfactory way.
    I have included some screen grabs below to illustrate my problems...
    ePub viewing in ADE
    If it looked like this on the iPhone I would be relatively happy!!!
    ePub on iPhone
    The main body copy is displaying in a sans serif font (Helvetica?) yet the heading, subheadings, numbers of the numbered lists, address, URL and legal line are all displaying as a serif font. All the style sheets are assigned to the same font family in InDesign (Helvetica). I have managed to get the bold text to appear in the sans serif font, by mapping the character style to the "strong" tag in the Export Tagging dialogue. All other paragraph styles are left as "Automatic".
    I can change the font in iBooks and this affects the displaying of all styles apart from the main body, which stays consistently in the "Helvetica" font.
    iPhone Fonts
    iPad Fonts
    On the iPad I'm also getting some elements coming in justified which looks awfull (see the main heading above). This image also shows how changing to an alternative font changes the heading and subheadings, but does not affect the main body!!!
    Any suggestions???
    Thanks

  • Safari stops responding when I try to bookmark (and other slow problems!)

    Two weeks ago my logicboard died, so I sent my ibook out to Apple for it to be fixed. Ever since I got it back this past Tuesday, my Safari has been extremely slow, but nothing else is wrong with my computer. Here are the problems:
    - The biggest issue is that Safari stops responding when I try to make a bookmark. The popup appears to select the bookmark's destination and to enter the name, but when you hit ok, the rainbow wheel comes up and it stops responding, so I have to reset Safari, and now I can't make new bookmarks at all.
    - It lags when it tries to open new windows, especially new tabs.
    - If a new page loads that scrolls at all, and then I try to scroll down, the wheel appears for several seconds until it can load the rest of the page. It's as though it gets stuck before it can scroll.
    - Sometimes when typing, it will also start to lag behind my typing speed, or if I try to click on a new field, it will not immediately allow me to type on occasion.
    All these things have never happened before I sent it out. I have reset my cache, and I have tried entering the open DNS addresses in my networks, which has improved loading speed, but hasn't fixed any of these problems. Does anyone have any idea what could be wrong and how I can fix anything?
    Message was edited by: canyon to the sky

    Try verifying the hard disk.
    Boot from your restore disk while holding down the C key until you see the Apple logo, then let go of the C key. You'll see an Installation window, select English. From the Menu Bar, select Utilities/Disk Utility. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click Verify. If DU reports errors, click Repair. If Disk Utility cannot repair the disk you have several options. One is DiskWarrior or
    TechToolPro If Disk Utility can repair any errors, go back to the Menu Bar, click Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
    If you don't have a restore disk, try booting into Safe Mode
    Carolyn

  • I need to export Quicktime files using the PhotoJPEG, MJPEG-A, or DV codec.  Is this possible in Final Cut Pro X?  In the options under export I don't see any of these available.

    I need to export Quicktime files using the PhotoJPEG, MJPEG-A, or DV codec.  Is this possible in Final Cut Pro X?  In the options under export I don't see any of these available.  I'm a newbie to this so any help would be greatly appreciated.

    I'm importing .MOV files from my Canon 5Dmk2 at 1080p.  So should I just export using a different codec and then use Compressor or MPEG Streamclip to convert to an MJPEG-A or PhotoJPEG codec?

  • After I upgraded my Mac with Yosemite, Photoshop Elements 12 stops responding when you use editing tools like eraser, clone stamp.

    After I upgraded my Mac with Yosemite, Photoshop Elements 12 Editor stops responding when you use some tools like eraser, clone stamp.

    This should help. Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
    ~ Arpit

Maybe you are looking for