FCP studio 2: FCP not working "may be damaged or incomplete"

Hi,
First of all i would like to say that I have read fairly extensively in the forums under the following topics:
"you can't open the application final cut pro because it may be damaged or incomplete"
and
"Final Cut Studio 2 installation hangs under Snow Leopard:
When attempting a new installation of Final Cut Studio 2 on a MacBook Pro running Mac OS X 10.6, the install hung with "about a minute remaining."
I have used FCS remover before installing - and had to go into control panel to kill the "hang" mentioned in the above thread.
After that the install seemed to go fine. All discs were inserted one after another and I got a successful installation message at the end.
FCP is the only app in FCP studio 2 that appears not to be working, and the only one greyed out with a white line through it (with the exception of compressor which is nowhere to be found in my apps folder).
Anyone got any suggestions about what to do here?
Thanks in advance

Not exactly sure which 'above thread' you referred to, but did you see both of these...?
http://discussions.apple.com/thread.jspa?messageID=10207223&#10207223
http://discussions.apple.com/thread.jspa?messageID=10997224&#10997224
Not sure they'll help, but your post was dropping down the queue.
K

Similar Messages

  • Put old I  life on new computer now I photo dosn't work it says cant open because it may be damaged or incomplete so all my pictures can not be accesed how do I get back to I photo or take what I installed off with out losing all my pictures?

    I got a new Mac and was trying to burn from I movie to get it to a disk but new I mac dose not have I DVD . So I had my old I Life 11 disc with I DVD on it and I installed it, when I did this it did something to my I photo I can not open it at all it has a message that reads ,you can't open the application IPhoto because it may be damaged or incomplete . Now I can not get or see any of my photos how do I reverse what I did? can I take that I Life back out and how? with out losing all my pictures? and how do you burn to DVDs now without IDVD?

    Diane,
    Your photos are in the iPhoto Library. Almost certainly that is intact, so don't worry.
    Go to your Home folder and open the folder called Pictures. What you want is in there, iPhoto Library. Don't do anything there, this is just to reassure yourself.
    So it is a matter of getting the iPhoto app to work. Apps are in the Applications folder. Find it and trash it.
    Next download iPhoto:
    https://itunes.apple.com/us/app/iphoto/id408981381?mt=12

  • Time machine is not working. I get a message: You can't open the application "Time Machine" because it may be damaged or incomplete.

    Time machine is not working under "Applications". I get this message: You can’t open the application “Time Machine” because it may be damaged or incomplete. What do I do?
    Time machine under system preferences lets me setup time capsule. But backup fails because "Volume is in use" Help please!

    It does sound like you have a corrupted install.
    The volume in use error is something we see all the time.
    Look at C12 here. http://pondini.org/TM/Troubleshooting.html
    But I suspect you have more serious issue.
    I would run a disk verify on your local OS disk. A5 in the above reference has some info.

  • I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.

    I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.

    Hello, terrygav. 
    I would recommend processing a reinstall of Mavericks.
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason H.

  • Extend studio extensions do not work right in DW CC

    I have Flexi Layouts Pro 2 and JQuery Media Pack installed within the latest Adobe Extension Manager CC and I cannot edit them or get them to work properly, it's like some of the menus/dialogs are missing or cannot launch. They are licensed products however, it shows a BUY bar on the top of each application bar as if they are trials. The editing function does not work in any of the JQuery Media Pack apps.
    Windows 8.1
    I have re-installed the DW CC software and updated the CC Manager
    reinstalled the extension and air components
    I have reset licenses
    Anyone have a solution or have the same problem?
    I really need help here --- these apps are not cheap

    Seems with CC 2014.1, you must disable (uncheck) "Live View" option. Once I did that, the dialogs worked
    extend studio extensions do not work right in DW CC 

  • My iPhoto isn't working. Error message says "you can't open the app "iPhoto" because it may be damaged or incomplete.

    Just purchased a new mac with Mountain Lion installed. My iPhoto isn't working. Error message says "you can't open the app "iPhoto" because it may be damaged or incomplete.

    First try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If it does then make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • My app store will not open. when i try to open it i get an error that reads "You can't open the application App Store because it may be damaged or incomplete". How can I fix this?

    my app store will not open. when i try to open it i get an error that reads "You can't open the application App Store because it may be damaged or incomplete". How can I fix this?

    I am having the exact same problem.  MacForums has been helping me, and I called Apple.  After trying everyone's suggestions, and Apple's, no success.
    My App Store app still says "incomplete or damaged."  There is even a circle with a line through it on the icon.  Apple said reinstall my Snow Leopard upgrade disc (not my original Leopard disc) and then run the Combo Update (like your suggestion).  Did not work.  I also updated the software from "Software Update".  Rebooted.
    I think this started after I replaced my hard drive with a SSD and moved the hard drive to where the DVD was.  I wonder if the person above who had the same problem also installed a SSD?
    Anyway, anymore ideas?  Even Apple is stumped.
    (In answer to the other post above, my Quicktime works fine.)
    Message was edited by: mrivmriv
    Just did some more reading.  I was going by the icon in the dock.  When I checked in Finder, there it was, fixed and brand new!!  Thanks, anyway.
    Message was edited by: mrivmriv

  • I just downloaded ilife every things working fine except, when i try to open iPhoto it said ''You can't open the application iPhoto because it may be damaged or incomplete. i tried to re-download it but my password didn't work for some reason. HELPPPP!!!

    i just downloaded ilife every things working fine except, when i try to open iPhoto it said ''You can't open the application iPhoto because it may be damaged or incomplete. i tried to re-download it but my password didn't work for some reason. HELPPPP!!!

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    Happy New Year

  • Iphoto won't open and has a message that it may be damaged or incomplete when I try to open.  It worked fine yesterday and I loaded ilife 11 and now iphoto won't open.

    After I loaded ilife 11 and tried to open iphoto, I could not and had a message saying it may be damaged or incomplete.  It was working fine yesterday and I've never seen this message.  What should I do?

    First run Software Update so you have the latest version.
    If you still have trouble then hold down CMD and OPT as you click on iPhoto.  It will give you options to rebuild your library.
    Regards,
    Captfred

  • Application will not open because it may be damaged or incomplete - any thoughts?

    I photo application will not open because it may be damaged or incomplete.  Any thoughts on how to fix this?

    Reinstall it:
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • After installing Maverick, my downloaded movies will not play in Quick Time.  It gives me the following error "You can't open the application "QuickTime Player.app" because it may be damaged or incomplete."  What can I do?

    After installing Maverick, my downloaded movies will not play in Quick Time.  I receive the following error message:
    You can’t open the application “QuickTime Player.app” because it may be damaged or incomplete.  So I tried to unistall QT and I get an error that says, You can not delete this application as it is a requirement for the OSX.
    Well I did find a way to delete it, by going into the various components and one by one deleting it.  Now I reinstall it and  the message is that this Quick Time is for an earlier version before Maverick 7.  SMH....Now what.?

    Hello, terrygav. 
    I would recommend processing a reinstall of Mavericks.
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason H.

  • I did not realize Ilife was already on the new mac, and installed I life from a disk. Now Iphoto has a  circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

    I did not realize Iife was already on the new mac, and installed I life from a disk. Now Iphoto has a  circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

    This sounds different than with my IOS devices, since I am able to see the photos even with a connection to the Internet.
    Do you mean without a connection to the internet? With a connection it's logical you would be able to see the PS.
    The following is from iCloud: Photo Stream FAQ
    Can photos be saved or downloaded from a shared photo stream?
    Yes. Once photos are shared, anyone who can view the shared photo stream can download and keep the photos permanently.
    On a device using iOS 6 or later, you can save photos to the Camera Roll. On a Mac, using iPhoto 9.4 or Aperture 3.4, you can save photos from the shared stream to your local Photo Library or any other location on your Mac. On a Windows PC, you can copy photos from a shared photo stream to any folder. On the web, photos can be downloaded directly to your computer from the detail view of each photo.
    This tells me that the image files are not on the HD unless the subscriber chooses to download them.

  • Help: could not open iphoto: message "you can't open the application iphoto because it may be damaged or incomplete".

    Help: could not open iphoto: message "you can't open the application iphoto because it may be damaged or incomplete".

    Greetings,
    It sounds like the iPhoto application is damaged and needs to be reinstalled.
    Follow this article: http://support.apple.com/kb/TS3249
    Cheers.

  • I accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

    i accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • My iPhoto library want open. it says "you can not open the application iPhoto because it may be damaged or incomplete., my iPhoto library want open. it says "you can not open the application iPhoto because it may be damaged or incomplete.

    my iPhoto library want open. it says "you can not open the application iPhoto because it may be damaged or incomplete., my iPhoto library want open. it says "you can not open the application iPhoto because it may be damaged or incomplete.

    Back up all data. Delete the iPhoto application and download it again from the App Store.

Maybe you are looking for

  • Print 2 different forms to 2 different printers 1 ABAP program

    Is it possible to print 2 different forms to 2 different printers from one program? Example: a Shipping invoice and a Shipping Label (mailing sticky label) Could they be a combination for form types? SAP Script and SMARTFORMS, SAP Script and PDF, SMA

  • I can't open iTunes all of a sudden... no problem before!

    I tried to open iTunes the other day and the message "iTunes requires Mac OSX 10.4.7 or later". My OS is 10.4.6 but I never had a problem before- why now all of a sudden it wont let me in? What can I do to resolve this? Within the past few weeks I go

  • I have a Roku and how do I push videos here to there from android?

    Have a Roku and since it's connected to Internet I thought maybe I could watch some tv shows from a streaming site through it and so I found the firefox channel but it says I have to push videos from my Android to the Roku but how do I do this? ?

  • Xquery retrieval,3 lines:  in-line: 1 sec; in function: 60 seconds

    Can anyone point me in the direction to find why 2 similar versions of a search have drastically different execution times? I've looked at the queryplan of each query and they both use the same index but the queryplans are different. Is there any doc

  • Newbie: Date time question

    I want to store a date and time into the same column. But I do not know the syntax to do it and to select it. Can anyone help me?