FCP Studio 5- It´s possible, to install from (Backup-)Copy of all DVD ? TIA

G4 Dual, G 5 Dual Mac OS X (10.4.3)

Can you please ask the question in the main message area...and please ask clearly. I have no idea what you are asking.
Shane
"There's no need to fear, UNDERDOG is scratching his head!"

Similar Messages

The computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

I'm not sure if I'm in the right forum for this question, but I don't know where else to ask about installing on cross platforms. So, the computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

Which Adobe product exactly?
Cloud: yes.
Creative Suite: no.

Can I install a backup copy of InDesign CS6 on my laptop?

I work with a non-profit large community chorus. We are 501(c)3. We are not Adobe cloud members and really don't want to be. We are licensed for two copies of InDesign CS6. I prepare our printed programs/Playbills for our major concerts. Is it OK to install a backup copy on my laptop for those occasions when I have to go to the printshop, proof a program, and make last minute changes?

No, for obvious security reasons, we don't make the serial number discoverable from a copy that is installed.
Assuming that you registered your software with Adobe, you should be able to logon to Adobe's website and go to your product registrations and retrieve the serial number from there. You did register your software, didn't you?
- Dov

Installing from backup??

Hi all. I have a time capsule and am going to install a new ssd into my macbook. I'm a bit of a newbie to mac and would like to know how to install the back up from my time caspule onto my new blank ssd. I know how to clone the HD and how to install fresh copy of Lion, but would like to know how to install my backup using the mac osx built in features.
Thanks
Peter

If you install a fresh copy of Lion on the new "clean" SSD, you can use Setup Assistant to "populate" the new system from you Time Machine Backup. You can find instructions here.
It would be safest to have a clone of your old system put aside just in case.
It is always wisest to have 2 backups using 2 different methods.This protect from media failure, backup file logical structural failures , and backup App. failures. All of these can and do happen.

Possible to make backup copy of Tiger DVD?

I'd like to make a backup copy of my Tiger DVD, just to be safe. I've tried to do this with Toast Titanium and also simply copying the DVD files to my hard drive first. Both don't seem to work.
Isn't this possible? What if this thing gets damaged? Or am I being naive in thinking Apple would allow such a thing?
Thanks for any help!

The disks which came with each Mac are indeed system specific. However, retail disks which are newer than those systems are not system specific.
Some may believe that they are not system specific, and I've seen them post here. Though these links should satisfy most people's need for clarity:
http://discussions.apple.com/thread.jspa?threadID=121839&tstart=0
http://docs.info.apple.com/article.html?artnum=106176
http://docs.info.apple.com/article.html?artnum=25497
http://docs.info.apple.com/article.html?artnum=25784
http://docs.info.apple.com/article.html?artnum=25517

Is it possible to install PSE 11 with an external DVD drive

I just got a new laptop. It doesn't have an internal DVD drive... so i have an external.. i tried to install PSE11 from it, but it just reads it... I don't want to upgrade to 12... i like the 11 and want to wait another year until PSE 13.. Am i just screwed? Thanks.

aunty smack wrote:
i tried to install PSE11 from it, but it just reads it.
Sorry, but I don't understand - if it is reading the disk what is your exact problem?
Another option is to download and install PSE11 from http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l and use the serial number from your boxed product. Follow their 'Very Important Instructions' exactly. Skip a step and you'll likely get an authorization error or download the current version.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Re-install from backup - music gone

After re-installing all my files from my backup, 99% of my music is gone. It's still in the iTunes.app library, but when I click on it, it can't be found.
All the files are in their place in /user/music/iTunes/iTunes Music, too.
When I remove the iTunes Library file from /user/music/iTunes/iTunes Music, EVERYTHING is gone from iTunes.app.
When I remove the xml file from there, nothing happens, neither for the better nor for the worse.
OK; I could just move all the files back into iTunes, but then everything will have today's date - which I want to avoid by all means. The date when I added files is important for me.
Is there a way to get the files AND the correct date back like it was before?
Thank you very much!

I wish Time Machine had ever worked. Tried it 3 times. 3 failures after a week.
As I said: I have a 6 hours old backup from where I copied everything back to my h. d. I wonder why these files don't work any more.
What do you mean by "when i remove"?
I wanted to force iTunes to rebuild its library from the data given. But it seems the xml file is good for nothing and the iT Library file contails all information.
It all looks as if the iTunes library file wouldn't match the real iTunes folder's content. As if it was another Library's index.

HT1386 I lost my profile on my PC and I copied everything over to a new profile. I installed Itunes and copied over all my music files and now it says that sync's but it is not getting a new download. what do I do?

I lost my profile on my PC and I copied everything over to a new profile.
I uninstalled Itunes and then reinstalled the latest version.
I added all of my music files to the itunes library
I tried to sync, but my latest download is not transfering from Itunes to the Ipod.
what do I do now?
Help Please !!!!

Do this. If all the synced media like apps and music are alread in the the iTnunes library just backup the iPod and restore from that backup
iOS: How to back up and restore your content
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

One of my disks broke and want to install from backup

Hi
I have a large Lightroom catalog and one of my external hard drives stopped working. fortunately I have a backup of the pictures, but I have a lot of keywords assigned to many pictures in the broken drive. How can I fool Lightroom into believing that the new drive that will contain the backed up photos is the original hard drive so that it can maintain all the assigned metadata?
There must be a way because I can't be the only soul that has had this happen on an important catalog....
Thanks in advance!!
Juan Dent
[email protected]

Hi,
Thanks. Yes my catalog is in a different drive than the one which crashed.
However what I need is not only the keywords I had defined, but the keywords
assigned to each photograph that was lost in the crashed drive. I made a
little experiment:
Using a USB mass storage I named it "LaCie" (which was the name of the
crashed drive) and created a folder with some pictures in the original
crashed drive and the folder was named as one of the folders in original
drive. Then I opened Lightroom and verified if the photos were showing the
keywords I had assigned to them and apparently they did.
Is this a correct and fullproof approach to restablishing the keywords for
each photo? I have a backup of the lost pictures so if this is the
recommended solution please let me know.
Thanks again,
Juan Dent

Installing FCP Studio Uninstall Express HD 3.5?

I just bought FCP studio(Academic Version), but before I install it should I uninstall Express(version above.) ? Live Type ? Soundtrack? I was planning on using Express on another machine so would like to have these programs on that since I paid for both.
MacProG5 Mac OS X (10.4.8)

You do not need FCE HD 3.5 before you install FCS. The installation for FCS will be shorter because LifeType (including livetime fonts (about 6GB) don't need to install. You can use both versions on one machine. However when you install FCE HD on another machine you may not use the program (FCE HD) the same time. Look in the legal information.

Install FCP studio to external drive

I want to install FCP studio to my macbook pro and install all supporting media to an external drive so i don't waste space. has anybody done that.
thanks
macbook pro Mac OS X (10.4.9)

As Jerry notes, templates can be installed on a non-system disk.
Pay close attention during the install process when you are given Options. A number of people have clicked through those moments without paying much attention and placed all there support files on the system disk - much to their dismay.
good luck.
x

Universal crossgrade update from FCP HD to FCP Studio on Mac Book Pro

Hi all,
Just ordered my universal upgrade for my MBP from Apple to go from FCP-HD to FCP Studio. My MBP has FCPHD installed on it. I installed it without being aware that it was not compatable with the intel chip.
Just wondering if there are any problems associated with simpy installing the complete crossgrade FCP Studio without first uninstalling FCPHD.
Or is it suggested to completely uninstall FCPHD before installing the new universal version of FCP studio.
The answer may ship with the software but I was wondering if I should start going through the uninstall process as I hear it is a bit involved.
Thanks for any help.
Bob
[email protected]
macbook pro 17" Mac OS X (10.4)

When I attempt to install the 5.1 cross-grade on a newly formatted hard drive, that is also set as the boot drive with the latest version of OSX on my dual G5, the 5.1 install goes through the entire process up until I get to the part where it begins actually installing the actual software applications. Then it fails--quits- completely quits installing. And yes, both of my optical disk drives are working. I have another disk drive that contains the last version of Final Cut Studio and when I first tried to install the cross-grade on that drive it wont even get past the screen that says that the software is checking to see if it can be installed on the drive. I was told by someone at Apple Pro Applications support that if 5.1 would not install on a new formatted hard drive that contained nothing but the latest version of OSX that I had bad install disks. It's a matter of getting them replaced. I KEEP GETTING THE RUN AROUND!!! It's like no one at Apple cares. I wait over two hours to get help, but I really am not getting help. When I call Panasonic for help with my AJ-HD27H VariCam Camcorders, or my a Aj-HD1200 decks, they bend over backwards to help me. Or when I have a problem with a Canopus Editing System help is easy and reliable.
Is there anyone who knows from whom I can go for an easy replacement of these instal disks?????
G5 Dual 2.7 Mac OS X (10.4.8) aja kona 2 7gig Ram x800 Vid

Is it possible to install a non HP Branded Windows 7 OS on a HPE h8-1360t.

Hi.
I would like a clean install of Windows 7 Professional.
I have a new OEM copy of it just waiting to be installed without any unnecessary HP branded software.
Will it work?
TIA

Yes it is possible to install a retail copy of windows 7, however there will be issues with drivers. The hp software build that came preinstalled on your product already has all the drivers for windows 7 for graphics, sound, LAN etc. that are compatible with Windows 7. You will most likely need to install the original drivers from the hp website if the native windows 7 drivers do not work. Before doing this make sure you have recovery disks for your product in case you need to revert back to the original configuration.
I am an employee of HP

Can you do an archive and install from a download update?

I upgraded to Tiger and 10.4.4 came on the disc I bought. I'm running into some problems w/ utilities that I have and would like to do an archive and install from the 10.4.10 download. The only option is an easy install though.

Welcome to the forums!
You cannot Archive & Install from a downloaded update. You need to do an Archive & Install from your 10.4.4 DVD, then download and run the 10.4.10 Combo Updater.

Can't install from recovery or USB !!!

I went throught the extra tie to download the recovery assistant and put the recovory on a USB stick.. I also have the Recovery partiion! But no matter what I do it always downloads the install from the internet! All 4GB of it !!! Why bother with a recovery partition or USB if you dont use them !!! This just wastes my time as I wait for something to download that I have on DISK !! Yes I held the option key and I selected the USB recovery,,,, and then it asked for my password and started dowbloading!
APPLE you officiallly ****** me off with this!   FIx it !!!   I dont have the time to wait for a 4gb download! Why bother with the recovery partition and USB ?? you dont ever use them!! Just tell everyone you will always download it from the internet.. free up 4 hours of your day to do this!
So yhou want a question??   here it is..   How do you install the OS without downloading it from the internet?????????

After DLing the installer once, quit it, and then save a copy of this ill-designed thing that stupidly deletes itself during the installation process. Then, you can rerun it w/o needing the Internet and wasting bandwidth, time, and electricity.

FCP Studio 5- It´s possible, to install from (Backup-)Copy of all DVD ? TIA

Similar Messages

Maybe you are looking for