FCP to Color previous post method?

I'm about to send a 50 min project into color for the first time (had a play around in it a few times before to familiarize myself with it a bit more)
Would the method at the bottom of the thread below be a good way to go about sending a project from fcp to color?
https://discussions.apple.com/message/8986453#8986453

Read the Color Manual section on Preparing your FCP project for Color.
Pay particular attention to the things that should not be included - eg retimed footage, mixed rate footage, still images, etc.
Also pay attention to native codecs (ie - what Color works with without transcoding) vs supported (what Color will ingest but have to transcode to work with and will export a different format).
The key thing is to get everything into ProRes at the same framerate and same size without filters, retiming, etc.
x
fwiw - in the linked thread, they went to a lot of trouble to send a sequence to Color but their monitoring solution was not supported. Monitoring Color requries a qualified export device (AJA, Decklink, Matrox) feeding a signal in the correct color space to a calibrated monitor via SDI, Component, or HDMI. Anything else is a guess as to what it really looks like.
good luck.

Similar Messages

How to Get a List of All XMLElements (Follow up to previous posting)

(CS5, Win7, 64Bit)
I need a collection (or array, etc.) of all the XMLElement objects in a given document in flat form (just like the "Structure Tree"'s hierarchichal view - only flatened).
I could not find any "normal" way (i.e., built-in property or method) to get at the information. Instead, I found that I had to recurse through the entire XMLElement tree, starting with the Root Element. For a large document, this can take close to a ten minutes, and sometimes I have to do this for an InDesgin Book containing over ten enormous INDD files.
After "கற்பனை Imagine" responded to my previous post about how to get all the XMLTags, I assumed that myDocument.xmlElements would return a collection of all the XMLElements in the Document. Unfortunately, it does not - it returns only the Root XMLElement. Thus, I have to recurse therough the hierarchy of XMLElements under the Root XMLElement - which takes a very long time.
There HAS to be a better way, right?
Would it be better were I to recurse through all PageItems in the document and then recurse through each PageItem's XMLElement tree? I assume that wouldn't make a big difference either way.
I'm open to suggestions...
TIA,
mlavie

mlavie:
I could not find any "normal" way (i.e., built-in property or method) to get at the information. Instead, I found that I had to recurse through the entire XMLElement tree, starting with the Root Element. For a large document, this can take close to a ten minutes, and sometimes I have to do this for an InDesgin Book containing over ten enormous INDD files.
What do you intend to do with this flat layout of XMLElements? That probably matters a great deal.
If performance is really at play, you can try using XML Rules instead of interacting with the DOM from JavaScript. But they are complicated and confusing and more suited to declarative programming.
Imagine suggests:
var a = myroot.evaluateXPathExpression ("//*");
xmlObjArray.push(a[b--]);
Why not stop there? evaluateXPathExpression already returns an array, why iterate over it and push its elements into a new array? What's wrong with the return value?

Re-open the Previous posting period

hi...
we have closed the posting period for the month of 01-02(april-may) and open the 03-04(june-july)...
but now we want to open the previous posting period i.e. 01-02(april-may) again...so how could we do this..
one solution i have got is that...
1. go to OX18 delete all the assignment for that company code and plant.
2. go to OMSY and change the posting period..
3. go to OX18 and reassign the plant and company code again...
this is the right method to do that..?
will there be any -ive implications if I open the previous period by this procedure..?
or suggest me some other way to do that...
Thanks in advance

Hi
You can open Closed MM periods but be careful because SAP does recommend opening closed MM periods.
Steps are :
1) Tcode MMPI --from Tool Bar select - System - User Profile - Own Data - In parameter Tab Enter "MMPI_READ_NOTE" in parameter Field.
Try to remove assignment of plants from company code.
Now Go to -
T-Code OMSY & Set the required Period.
Re-assign Plants to Company Code & Check whether correct preriod is open thru T-Code - MMRV
Now use T-code - OMWD to Assign Valuation grouping code to Valuation area because the earlier data gets deleted when assignment of Plants was removed.
Use the transaction code OMS2 then select FERT (or any other Material Type used by your company)
Then click on the quantity and value update.
Select your plant or valuation area and put Tick Marks in Value update and Quantity update
Even check this link...Reopening the posting period that was closed
This will definitely reslove your problem.
Thanking you.

BlackBerry World not accepting VISA card -- follow up to my previous post

Re purchase of an app for new Z10 -- main software all successfully updated to most recent. Well, I posted last time about being escalated up through the ranks of BlackBerry software helpers from Bell, and after several levels getting a very easy-to-communicate-with woman from BlackBerry in Halifax, NS...
She told me Bell would bill me for the apps on my carrier bill, and I told her No, they told me they didn't do that, not in Victoria BC my home town, anyhow. I asked her to call and contact them... she said she did, and said Yes, they would. So I set that up on my BlackBerry World sign-in page using my computer, under her guidance, and it seemed to be set up. I even purchased an app that way successfully, afterwards... [She told me at the time that yes, there was a problem with the tool that handles VISA payments, sometimes...]
BUT, several days later when I went to do the same thing again with another app, well, I had a message in red on my purchase screen on my Z10 that carrier purchase was not available!
Ahem.
So, I tried purchasing via VISA again [read my previous post, I called VISA, tried to see if there was something wrong there, no there wasn't]. No form of my re-entering my VISA card or editing it etc. would work.
So I tried PayPal, over the past weekend I established a PayPal account to be paid for via my same VISA card, that took some doing as the procedure is not that clear on their website and you have to explore the sections under "my money" etc. to see just what is going on with it... without any warning or info from either BlackBerry or PayPal the account wouldn't work [refused several tries to purchase an app] until a special method for BlackBerry was posted in that "my money" section on PayPal, they call it a prepayment account or something like that, it takes about an hour or two on a Sunday for that to appear for a new account, and then [I was doing this via my computer after signing in to PayPal] I saw a side message that this purchasing procedure would not work until August 12th.
Today, August 12th, I just purchased a trial app, Medieval Ringtones, and that went through! Unfortunately I was on just our own house WiFi [good signal, I thought at the time, though], and just before it got installed something said "network problem" and it stopped installing. Now I can't buy it again either, I'll try later just to see if it reloads -- it wouldn't reload to the purchase point. I don't really care, it was an experiment. I just downloaded a free app, Top 500 Ringtones, from BlackBerry World, and that went smoothly and seems great, lots of choices, most of them free as far as I can tell.
Warning to users: I would establish the PayPal account via BlackBerry World's own access point on the computer, first, through the BlackBerry World website, clicking on their PayPal symbol, before trying to purchase via PayPal, as establishing a PayPal account first, independently, may lead to confusion if you establish it outside of BlackBerry World.
Now, I have noticed the work-around posted by a BlackBerry Forum guru here on using a dummy VISA account, this helpful person provides a list. WOULD THIS HELPFUL PERSON PLEASE EXPLAIN THE PROCEDURE IN DETAIL? i WOULD HAVE NO IDEA HOW TO DO IT IN PRACTICE -- APPARENTLY THE SOFTWARE WILL STILL CHARGE THE APP TO ONE'S REGISTERED VISA??? PLEASE GIVE DETAILED INSTRUCTIONS.
If I can, indeed, purchase something via PayPal, or ultimately, indeed with a VISA payment, without a glitch [I'll keep trying] I'll report it here. Meanwhile all the apps I've downloaded from BlackBerry World have been free ones, except for the one that mistakenly got sold to me via Bell billing me for it [which they won't] a few days ago [either Bell or BB got stuck with the $1.99 or something for that!]. The free ones I've downloaded have been excellent, including this Top 500 Ringtones, just the kind I was looking for, lots of real telephone and cell phone ring sounds for a purist like me...
But I hope BlackBerry can fix up the glitch in BlackBerry World soon, it shouldn't be there at all... my husband has the theory the facility is staffed by too small a core of software people to keep up with the problems and wasn't properly tested, or else it was subcontracted out and they are stuck with it until they get a new one -- come on, BlackBerry, get a new BlackBerry World payment procedure that works smoothly, us BlackBerry fans are anxious about you!!!

Just to say there ARE lots of Apps on BlackBerry World, so potential BB purchasers should not let that stop them, and some very good free ones, excellent -- BlackBerry Travel is really good, and OsmAnd maps are fabulous, big to download, but when you get it you'll be amazed. Just download a provincial or smaller map to start, because they are huge files and very detailed, but lots of trails and paths are on them... good for park trails and such.

Change in Useful life of asset in mid year, but the previous posted depreciation should not be changed

Dear Experts,
I have a requirement in one of my client, We need to extend the useful life of asset in mid of an asset fiscal year and the depreciation which was posted in the previous should not be changed.
Requirement:
Useful life of asset is to be extended after completing depreciation for 4 years and in-between the current asset fiscal year. Provided the present asset value has to be taken as the new book value of the asset and the depreciation posted henceforth to be posted based on the new asset value till the remaining useful life.
Previously posted depreciation should be unchanged.
Analysis:
1.      The fiscal Year followed - October to September.
2.      The useful life of asset will be changed, and the depreciated value posted till 31/mar 2014 will have the old depreciation value ( based on the original acquisition value)
3.      The Depreciation key used in of type LINR (linear), depreciation value will be calculated based on the Book value till the asset value becomes ZERO at the end of useful life of the asset.
4.      We can change the useful life of the asset at the end of a Asset fiscal year say FY- 2014, if this is done the existing configuration will take the Book value of the asset at the end of the Fiscal as the asset value and the new depreciation will be calculated based on the new useful life of the asset. The asset value will become ZERO at the end of the newly changed Useful Life.
5.      But the requirement is that the useful life of the asset will be changed exactly half way in between existing Asset fiscal (i.e., 31/03/2014), if this is done system will change the depreciation value based on the new useful life ( since the Dep Key is LINR), but the depreciation value will change from the fiscal start say October 2013 to September 2014 ), which will not satisfy the requirement of the client. Since the depreciation which is already posted from October 2013 to March 2014 should not be changed.
Note:
1. We are not willing to retire the asset and create a new asset with the remaining book value as asset value and start depreciation.
Kindly let me know if the requirement can be fulfilled without retiring the asset.

Dear All,
This requirement has been completed.
1. I created New Multi level valuation method with base 26 ( Net book value w/o Revaluation ).
2. New depreciation key was created and the above method was assigned to it. I never changed the Base method.
3. new interval was created in the depreciation area, with this created dep key and extended the useful life of the asset. The depreciation was calculated according to the requirement.
Originally the asset had useful life of 5 Years, I changed the asset useful life to 8 years now with new Depreciation key 2001.
Depreciation was already posted to the asset till 04- 2013 for an amount of 148.27 SAR.
Net Book value carried forward to 2013 = 1575.56 SAR
Depreciation already posted till 4th period =   148.27 SAR
Current Net book value after useful life extension           = 1427.29 SAR .
Now the new depreciation key 2001 with Multilevel method 201, will take this Net-book value as Asset value and will depreciate along the useful life of the asset till it becomes zero.
Planned depreciation of 2013 ( remaining 6 months) = 166.24 SAR
Planned depreciation of 2014 = 225.96 SAR
Planned depreciation of 2015 = 225.96 SAR
Planned depreciation of 2016 = 225.96 SAR
Planned depreciation of 2017 = 225.96 SAR
Planned depreciation of 2018 = 225.96 SAR
Planned depreciation of 2019 = 131.25 SAR
Total      = 1427.29 SAR ( the Asset value becomes zero at the end of its remaining useful life.
The previously posted depreciation from 01.01.2013 to 30.04.2013 was untouched.

How to use post method in j2me

I used post method and when im about to receive the response from the servelt i get the output like
str=<html><head><title>Apache Tomcat/4.1.24 - Error report</title><STYLE><!--H1{font-family : sans-serif,Arial,Tahoma;color : white;background-color : #0086b2;} H3{font-family : sans-serif,Arial,Tahoma;color : white;background-color : #0086b2;} BODY{font-family : sans-serif,Arial,Tahoma;color : black;background-color : white;} B{ ................

Thanks supareno I have tried the weblink u hav given. It helped me a lot

Where XML and related file belong when send from FCP to Color?

Hi(Bonjour)!
Where XML and related file belong when send from FCP to Color?
I want to start a fresh project and delete all previous tests.
Michel Boissonneault

Hi(Bonjour)!
I messed up with preference for home directory.
Thank you.
Michel Boissonneault

FCP to Color sequence clips do not match up.

Hello,
I edited my video with multiclips and sending from FCP to Color. Problem I have is the video from my FCP sequence is not what is coming out in Color, in fact it's way off. Can't figure out what I am doing wrong, and Color manual does not have any trouble shooting instructions in it's manual. Please help.
Thanks

There are known issues that affect sequences containing multiclips.
http://www.apple.com/support/releasenotes/en/Color1.0rn/
Since this particular issue has been discussed here before, it would be wise to take a look at what has already been posted.
Multiclips & Color

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Trying to Imitate the html POST method with an applet

I am trying to imitate the POST method with an applet, so that I can eventually send sound from a microphone to a PHP script which will store it in a file on a server. I am starting out by trying to post a simple line of text by making the PHP script think that it is receiving the text within a POST-ed file. The reason I am doing things this way is in part because I am, for the time being, limited to a shared server without any support for servlets or any other server side java.
The code I am trying is based in part on an old thread found elsewhere in this forum, concerning sending data to a PHP file by imitating the POST method:
link:
http://forum.java.sun.com/thread.jspa?threadID=530399&messageID=2603608
someone named "harmmeijer" provided most of the answers on that thread. If that person is still around hope they take a look at this,also I have some questions to clarify what they said on the other thread..
My first attempt at code is below. The applet is in a signed jar file and is trying to pass a text line to the PHP script in the same directory and on the same server that the applet came from. It is doing this by sending header information that is supposed to be identical to what an html form would send if it was uploading a .txt file with the line of text within it. The applet displays one button. When you press it, it sucessfully starts up the postsim method (defined at the end), which is supposed to send the info to the PHP script at the server.
I have two questions:
1) I know that the PHP script is starting up, because it prints out a few messages depending on what happens. However, the script does not recognize any file coming down the line, so it does not save anyting on the server, and prints out a message saying the no file was uploaded.
Any idea what might be going wrong? I'm not getting any error messages from the applet. I've tried a few different variations of the 'header' information contained in the line:
osToServer.writeBytes("--****4353\r\nContent-Disposition: form-data; name=\"testfile\"; filename=\"C:testfile.txt\"\r\nContent-Type: text/plain\r\n");
The commented out line below it shows one variation (which was given in the thread mentioned above).
2) You'll notice that I've commented out the two lines having to do with the input line:
//InputStream isFromServer;
and
//isFromServer = uc.getInputStream();
The reason is that the program crahes whenever I put the latter line in - to the extent that Opera closes down the JVM and then crashes when I tried to exit it.. I must be doing something horribly wrong there! I first tried using isFromServer = new DataInputStream(uc.getInputStream());
becuase it was consistent with the output stream, but that caused the same problem.
Here's the code:
public class AudioUptest1 extends Applet{
//There are a few spurious things defined in this section, having to do with the fact the microphone data is evenuatly going to be sent. haven't yet insterted code to get input from a microphone.
AudioFormat audioFormat;
TargetDataLine targetDataLine;
SourceDataLine sourceDataLine;
DataOutputStream osToServer;
//InputStream isFromServer;
URLConnection uc;
final JButton captureBtn = new JButton("Capture");
final JPanel btnPanel = new JPanel();
public void init(){
System.out.println("Started the applet");
try
URL url = new URL( "http://www.mywebsite.com/handleapplet.php" );
uc = url.openConnection();
//Post multipart data
uc.setDoOutput(true);
uc.setDoInput(true);
uc.setUseCaches(false);
//set request headers
uc.setRequestProperty("Connection", "Keep-Alive");
uc.setRequestProperty("HTTP_REFERER", "http://applet.getcodebase");
uc.setRequestProperty("Content-Type","multipart/form-data; boundary=****4353");
osToServer = new DataOutputStream(uc.getOutputStream());
//isFromServer = uc.getInputStream();
catch(IOException e)
System.out.println ("Error etc. etc.");
return;
//Start of GUI stuff
captureBtn.setEnabled(true);
//Register listeners
captureBtn.addActionListener(
new ActionListener(){
public void actionPerformed(
ActionEvent e){
captureBtn.setEnabled(false);
//Postsim method will send simulated POST to PHP script on server.
postsim();
}//end actionPerformed
}//end ActionListener
);//end addActionListener()
add(captureBtn);
add(btnPanel);
// getContentPane().setLayout(new FlowLayout());
// setDefaultCloseOperation(EXIT_ON_CLOSE);
setSize(250,70);
setVisible(true);
}//end of GUI stuff, constructor.
//These buffers might be made larger.
byte tempOutBuffer[] = new byte[100];
byte tempInBuffer[] = new byte[100];
private void postsim(){
System.out.println("Got to the postsim method");
try{
//******The next four lines are supposed to imitate a POST upload from a form******
osToServer.writeBytes("--****4353\r\nContent-Disposition: form-data; name=\"testfile\"; filename=\"C:testfile.txt\"\r\nContent-Type: text/plain\r\n");
//osToServer.writeBytes("Content-Disposition: form-data; name=\"testfile\"; filename=\"C:testfile.txt\"\r\nContent-Type: text/plain\r\n");
//This is the text that's cupposed to be written into the file.
osToServer.writeBytes("This is a test file");
osToServer.writeBytes("--****4353--\r\n\r\n");
osToServer.flush();
osToServer.close();
catch (Exception e) {
System.out.println(e);
System.out.println("did not sucessfully connect or write to server");
System.exit(0);
}//end catch
}//end method postsim
}//end AudioUp.java

Hi All,
I was trying to write a signed applet that helps the
user of the applet to browse the local hard disk and
select a file from the same. The JFileChooser class
from Swing is what I used in my applet. The problem
is with the policy file. I am not able to trace the
exact way to write a policy file which gives a total
access to read,write,delete,execute on all the drives
of the local hard disk.
I am successful in signing the applets and performing
operations : read,write,delete & execute on a single
file but failing to grant permission for the entire
file.
Any help would be highly appreciated.Which policy file are you using? there might be more than one policy file.
also, u have to specify the alias of the signed certificate in the policy file to grant the necessary priviledges to the signed applet.

Passing Parameters via Post Method from Webdynpro Java to a web application

Hello Experts,
I want to pass few parameters from a web dynpro application to an external web application.
In order to achieve this, I am referring to the below thread:
HTTP Post
As mentioned in the thread, I am trying to create an additional Suspend Plug parameter (besides 'Url' of type String) with name 'postParams' and of type Map.
But when I build my DC, I am getting the same error which most of the people in the thread have mentioned:
Controller XXXCompInterfaceView [Suspend]: Outbound plug (of type 'Suspend') 'Suspend' may have at most two parameters: 'Url' of type 'string' and 'postParams' of type 'Map'.
I am using SAP NetWeaver Developer Studio Version: 7.01.00
Kindly suggest if this is the NWDS version issue or is it something else that I am missing out.
Also, if it is the NWDS version issue please let me know the NWDS version that I can use to avoid this error.
Any other suggestion/alternative approach to pass the parameters via POST method from webdynpro java to an external web application apart from the one which is mentioned in the above thread is most welcome.
Thanks & Regards,
Anurag

Hi,
This is purely a java approach, even you can try this for your requirement.
There are two types of http calls synchronous call or Asynchronous call. So you have to choose the way to pass parameters in post method based on the http call.
if it is synchronous means, collect all the values from users/parameters using UI element eg: form and pass all the values via form to the next page is nothing but your web application url.
If it is Asynchronous means, write a http client in java and integrate the same with your custom code and you can find an option for sending parameters in post method.
here you go and find the way to implement Asynchronous scenario,
http://www.theserverside.com/news/1365153/HttpClient-and-FileUpload
http://download.oracle.com/javase/tutorial/networking/urls/readingWriting.html
http://digiassn.blogspot.com/2008/10/java-simple-httpurlconnection-example.html
Thanks & Regards
Rajesh A

File Not found error when calling Form Post Method to a JSP from JSP Portlet

I have built a set of JSP forms using post method to call other JSPs. Normally, the code looks like
<form name="MyForm" action="MyJsp.jsp" method="post">
I migrated the calling form containing this code to a portlet, but not the MyJsp.jsp. When I submit the form, I get a file not found in Jserv.log
Exception:javax.servlet.ServletException: java.io.FileNotFoundException: D:\servlet\RegisterCompany.jsp (The system cannot find the file specified)
[14/06/2001 13:59:59:679 PDT] JspServlet: unable to dispatch to requested page: Exception:javax.servlet.ServletException: java.io.FileNotFoundException: d:\oracle\isuites\apache\apache\MyJsp.jsp (The system cannot find the file specified)
I notice that launching the calling jsp from a portlet, my opriginal context that uses ../Apache/Apache/htdocs is not being searched for the JSp. Why is this? Moreover, I try to set up an Alias in httpd.conf file to the this director and use it with the jsp in the action tag, but still get an error that my jsp servlets/Myjsp can't be found. Why is it insiting on looking at servlets context instead of htdocs.
I have none of these issues outside of Portal30 using IAS.
regard

Initially, I couldn't do this unless I moved tghe jsp's up to the root directory of IAS, i.e ../Apache/Apache. Nomrally, htdocs is my doc directory for IAS. I could not do http:\\myUrl\htdocs\myJsp. If I tgried this, I got an error in Apache error logg that said can't find file ..\htdocs\htdocs\MyJsp.jsp.
If I just tried the the URL http:\\myUrl\MyJsp.jsp with Jsp file in htdocs, I would get an error in the Jserve log that file d:\oracle\isuites\apache\apache\MyJsp.jsp could not be found. Once I moved the file MyJsp to Apache/Apache directory, it could be found using http:\\myUrl\MyJsp.jsp. Later, I delted these files and kept the ones in htdocs and they continued to work.
I'm confused why launching pages through portal isn't consistant with Apache Standards. Where is the documentation that tells me how to configure context and aliases for pages launched from portal pages?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sue Vickers ([email protected]):
David,
Passing information using Portal is different than just using Apache/Jserv. Does it work in portal if you use the absolute path?
<form name="MyForm" action="http://host.domain/MyJSP.jsp" method="post">
Portal will not be on the same relative path as your Apache, so you may need to adjust your action somehow.
Thanks,
Sue<HR></BLOCKQUOTE>
null

How to use the POST method In Oracle APEX 3.1

Hi,
In APEX if we are submitting the page the parameters( Variables ) will pass through URL.
How to hide the these parameters from URL??
I Hope POST method will solve this problem.
How to use the POST method in APEX???
Help me out to solve this problem.
thanks in advance.
Cheers,
Shan

In APEX if we are submitting the page the parameters( Variables ) will pass through URL.No they won't. Submission POSTs the <tt>wwv_flow</tt> form.
Sometimes a branch may be performed after submission, generating a URL in which parameter values are visible. To avoid this, use the save state before branching option.
Other actions—like using navigation lists, or clicking a link in a report—will perform a GET using parameters in the URL. In these cases using Session State Protection is advised.

Posting a credit memo in reference to a previously posted document

Hi SAP gurus,
I would just like to ask if there is a functionality in SAP re: credit memo postings wherein the system can refer to a previously posted customer document and automatically derive the values such as GL account, cost center and business area of the posted document to the new Credit memo being processed?
Example
Customer invoice:
Dr Cash (GL 100001, Cost center 1000, BA 1000) 1000
Cr Customer A 1000
In the credit memo posting screen, upon inputting the document number of the invoice in the invoice reference, the client requires us that the GL account 100001, cost center 1000 and BA 1000 be derived automatically without manual encoding from the user. Meaning all they have to input is the customer number and the invoice reference (doc number). Is this possible? Thanks

Hi
The invoice ref field in credit memo posting is related only with the payment terms. The systems determines the payment term from the original invoices.
This field should be either filled with the original invoice document number or "V".
If the field is left blank, then the system always takes the payment term for credit memo as "Due immediately"
I dont thing there is a provision for copying the line item details as per original invoice document.

Data is not refelct by Set_data method in post method of ME_PROCESS_PO_CUST

Hi OO gurus,
I'm calling Set_data method to set line item data of PO in POST method in ZME_PROCESS_PO_CUST.
But data is not updating.
Can any body give logic how to call set data method in POST method?
Thanks in advance.
Edited by: v bheem on Jan 27, 2010 12:51 PM

Hi,
Do like the below code...
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM.
DATA: re_data TYPE mepoitem.
DATA: RE_HEADER TYPE MEPOHEADER.
DATA: L_HEADER TYPE REF TO IF_PURCHASE_ORDER_MM.
DATA: L_HEADDATA TYPE MEPOHEADER.
CALL METHOD im_item->get_data
RECEIVING
RE_DATA = RE_DATA.
L_HEADER = im_item->get_header( ).
L_HEADDATA = L_HEADER->GET_DATA( ).
next modify feilds which you want to update of re_data and set values...
CALL METHOD im_item->set_data
EXPORTING
IM_DATA = RE_DATA.
Thanks,
Shailaja Ainala.

FCP to Color previous post method?

Similar Messages

Maybe you are looking for