Fcp to psp

does anyone know the correct settings when exporting from fcp to save on to psp. I've tried a miriad of combinations but with no joy, any thoughts?

I presume you mean Playstation Portable? I can't help you with the settings, but I use 'Instant Handbrake' (http://handbrake.m0k.org/), which does a perfect job. Or if you want to pay, use 'PSPWare' (http://www.nullriver.com/index/products/pspware), which can convert and sync at the same time.
I hope this helps a bit.
Fiver

Similar Messages

  • Work Flow with FCP and color correction

    I am looking for a decent workflow between FCP and motion when I need to apply color correction to the clips.
    I have a goup of clips in FCP that I would like to send to motion, animate them and send them back to FCP. Problem is I want to use FCP for the color correction- nicer than motion's. The, all bad options I have come up with are:
    1. color correct in FCP and then send to Motion- will not work because filters are not applied in send.
    2. Export the clips as one QT self containned movie- I lose the clip partitioning.
    3. Exports individual clips to QT then into Motion- I lose the clip ordering
    4. Color correct after I get back into FCP from Motion- clip boundaries are lost making applying color correction harder.
    Any ideas?
    Rick

    I've done this two ways - both variations on the methods you have outlined. First and simplest and one I used last week on a PSP project was to apply the color correction to the Motion clip (.motn file) after it came back from Motion. This is simple and easy, but if you've done titling, you may not want to color correct that.
    The second is as you said to render and export a self contained movie, then import it and copy it onto the timeline above the original clip that produced it, thus (at least organizationally) maintaining a connection between them. I then send the quicktime to Motion.
    Sorry I cannot think of another better way of doing it...
    Patrick

  • Lacie external lags on FCP

    A couple of weeks ago I transfered some video and audio files from a G-drive to a new lacie external HD to save some space, however the Lacie seems to lag when it plays the video files. I've partitioned it on the Mac (and a PC at first to transfer some files to it/test it out), and tried all three cables it came with (USB, Firewire 400 and 800) and nothing I've tried seems to get rid of the lag.
    Now I've encountered a new problem of the audio not being heard, with the exception of one time after I did some rendering. I'm at a complete loss for what is the problem. Any ideas?
    Thank you for your time.
    PS: My version of FCP is 6.0.3

    I didn't log and capture the footage used here as they are video and audio files. I formatted them into PSP MPEG-4 formats I believe (It's been a while so I can't say exactly what format they are in).
    I think the problem is mainly the drive because they worked fine when I stored them on the G-drive and only when I moved them onto the Lacie did the lag start (though I seem to have the same lag on certain footage I'm using). The copies I made before the erasing proves that some of the files lag and some don't on the G-drive, while the original videos lag and no audio on the Lacie. Perhaps I should talk to the lacie people?

  • PSP Vintage Warmer 2 vs. Nomad Factory Analog Signature Pack

    Hello,
    I love my MacBook Pro DP 2.0ghz system running Logic Express. I am finding, however, that I need an analog "fattener" to make my tracks and mixes sound richer and more "old skool."
    Based upon my budget, I have narrowed down my choices to these two:
    PSP VintageWarmer 2 and
    Nomad Factory Analog Signature Pack
    Engineers seem to tilt in the direction of the PSP, but I think the Nomad stuff is just a little less well-known. Do any of you have direct experience with both plug-ins and can offer your opinions? I have posted similar questions on both the Nomad Factory and PSP forums, but I should have a less biased set of responses from this community, I would think.
    Thank you,
    Bart of DIS
    MacBook Pro Dual Core 2.0ghz w/2GB RAM   Mac OS X (10.4.9)   FCP, DVDSP, Logic Express, Adobe CS

    Well, I have spent a few hours demoing PSP Vintage Warmer and the Nomad Factory Analog Signature Pack. Here are my first impressions:
    1) The Nomad interfaces do actually make more sense to me. I still have not figured out how to get to the back panel of the PSP VW yet, although I didn’t really “research” the issue much.
    2) I found that the Nomad’s analog overdriven distortion sounded very realistic. I liked the EQs, both the stand-alone and the channel strip versions. I had a goofy drum machine patch that I looped and tried these plugs on, and the EQ found life and realism in the patch that I did not think was even there.
    Having said all that, I was even more impressed with the PSP Vintage Warmer:
    3) The presets were 100x better. In fact, on the drum loop I was demoing with, EVERY preset sounded good, and better than the Nomad presets, even the clearly inappropriate ones!
    4) Instead of modeling the buzziness of overdriven tubes, the PSP seems to do better at replicating the richer and more subtle warmth of tape saturation.
    5) The PSP VW seemed to have a LOT more headroom and a LOT more depth. Things got analog fat in a hurry without tons of overdrive distortion break-up. I quickly tried it on other things, like vocals, rock guitars, B3, and bass, and found it to be extremely well-mannered, no matter what the input signal.
    I can see how most fans of Vintage Warmer claim they use it on every track. You absolutely can’t screw the thing up, even if you have no real expertise in final mixing and mastering (like me), and if you actually DO have the knowledge and bat-ears to tweak this plug, I’m sure it delivers even more.
    I still have more testing to do. My verdict is certainly not a final one, but right now my money (literally) might be on the PSP Vintage Warmer. I am using Logic, and the included EQ is great—I don’t need another, less “tweakable” one, even if it looks “vintage cool.” What I do need, however, is a plug that subtly saturates and warms the signal so that it sounds like I loaded a 2” tape 24-track Studer in a big-time expensive studio and tracked there. PSP’s Vintage Warmer nails that. With more study and experience, I might even be able to master with it, something I doubt could be done with the Analog Signature Pack.
    Please give me you opinions and feel free to smack mine down, so long as your contentions are instructive and well-informed. Thanks!
    Bart of DIS

  • Unable to capture in FCP 6, HELP!

    Trying to capture dvx100 footage using FCP 6(studio2) with no luck.
    When initiating log and capture, I can control my camera via FW, but preview is disabled as well as
    ability to capture footage.
    I have tried deleting pref's, deleting QT prefs, triple checked settings (NTSC DV), tried variations of
    turning camera off/on during opening of FCP as well as using alternate ports.
    I'm at a loss. Can anyone help!!?!?!
    - Need to cut something asap.
    Thanks.

    Thank you Patrick. You have helped me before, so thanks again.
    I do not have anything else connected to the firewire ports. I have an external hard drive, but I have tried to capture with and without the hard drive attached. I did recently back up using Carbon Copy Cloner to another hard drive, if anyone thinks this may be the issue.
    I can't recall the exact error message in FCP (I have deleted the program trying to fix the issue, and focus on the capture problem in Quicktime thinking that if Quicktime and iMovie both don't capture, that the problem is not with FCP, but either with the OS or the back end of QT) I can re-install FCP to give you the exact FCP error message if you would like me too. Ie, if the exact error message is necessary.
    Thanks again for your response.

  • Unable to capture HDV footage with FCP 5.1

    I've captured HD footage onto my old computer (10.4.11) without any problem but now I'm trying on my new one and it doesn't want to know.
    First off there was a problem with the Firewire port ejecting my hard drives randomly so I took it to be repaired and they replaced the logic board and the port works fine.
    I've looked at all the posts I could find, I've trashed my preferences, reinstalled Final Cut Studio ( after uninstalling then updating the software). I've made sure the camera is set to HDV playback rather than auto and that the iLink HDV/DV conversion is off. I've tried all the easy setups and all the custom ones I could think of but still FCP (5.1.4) won't allow me to capture. On some settings I have had device control but no image, on others it said the camera isn't connected. The only way I've captured footage is by using the HDV Apple Intermediate Codec 1080i50 which works fine.
    The camera is a Sony HDR-HC7 connected directly to the iMac with a Firewire 800 / iLink cable or daisy chained through my external hard drive with a 400 / iLink cable (neither of which makes any difference) I can also capture SD footage from both the HDV and a Panasonic SD camera when in DV-PAL setup. The HDV camera also shows up as connected in the system profiler.
    This is driving me nuts so any help would be appreciated and if there's any other info I can help with to make this clearer let me know.
    Message was edited by: MrMajesticMole

    I just got off the phone with a friend of mine who was having the same problem as you. Although you say the camera playback is set properly, please recheck this. go into your camera's playback menu>menu>standard set>VCR HDV/DV. Unplug your firewire from the camera. Make sure camera is set to HDV NOT auto. replace firewire cable. Now open FCP. Go in Audio/video settings>A/V devices (farthest tab on right). In box for playback edit to tape different from video output (make sure it's checked) mirrored (checked) Video playback 1080i50, Audio HDV. I hope that works now.
    Steve

  • Unable to capture HDV in FCP 6.0.1 from Sony HVR-Z1P

    Hi I'm attempting to capture HDV footage from a Sony Z1.
    I am trying to capture some HDV footage I shot with the Z1, but FCP simply refuses to recognize the Z1
    I'm certain I've got all the settings correct:
    - Camera is set to HDV firewire out
    - capture presets is set to HDV
    - device control preset is set to Sony HDV FireWire
    - sequence preset is set to HDV 1080i50 (I'm in Australia)
    - footage IS HDV 1080i50
    But I keep getting the "Unable to Initialize Capture Device and Device Control" popup. I've tried everything
    - rebooted the camera
    - restarted FCP
    - rebooted the system
    - changed the capture/device control settings in FCP and tried out a regular DV deck to make sure it wasn't the cable
    Nothing has worked.
    I'm on a MBPro I7. No Kona card or anything like that, just trying to capture through firewire.
    Any suggestions would be greatly appreciated.
    Thank you,
    Matt
    At present it will capture HDV in IMovie but not FCP 6.0.1
    Message was edited by: Matt Blyth

    Thanks Adrian, since posting the thread I've thought of that too but unfortunately to no avail. From other forums I've read this seems to be a central theme to the solution to my capture woes. I since have sorted the problem it was in Audio/Video Settings.
    In the end I set my Audio/Video Settings to:
    Sequence Preset to: Apple Intermediate Codec 1080i50
    Capture Pre-HDV- Apple intermediate Codec
    Device Control Preset: Sony HDV 1080i50 Firewire
    And hey presto my I'm capturing HD without any problems. Thanks everyone for your suggestions.
    Message was edited by: Matt Blyth

  • Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

    I am unable to capture in FCP, Quicktime and iMovie.
    I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
    My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
    Here are the details…
    - Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
    - OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
    - I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
    - Deleted my FCP pref’s using FCP Rescue.
    - Deleted the Quicktime receipts, and re-installed Quicktime 7.04
    - Reverted back to Quicktime 7.01
    - Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
    - Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
    - I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
    I may have tried more solutions, but these are the fixes that I can recall.
    If anyone has any others suggestions, it would be much appreciated.
    Brent

    Hi Brent:
    Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
    iMovie: Cannot see or control camera
    http://docs.info.apple.com/article.html?artnum=43000
    Sue

  • FCP & CRT Video Monitors with 24" iMac

    I am considering the purchase of a 24" iMac with the optional 7600GT video card for video editing. I have read that the $19 Apple "Mini-DVI to Video Adapter" will give me audio and SVGA outputs to connect to a TV/CRT monitor. But I have read many user comments that claim the LCD display in the iMac suddenly changes resolutions when this Mini-DVI adapter is plugged into the iMac. But those comments don't say if it happens to every iMac (including the new 24") or just to older iMacs. I also wonder if the 7600GT video card makes any difference.
    My intention is to edit video in FCP on this 24" iMac and I wish to view full resolution standard video on a CRT video monitor. But I would prefer it if the resolution of the iMac screen didn't change while I view the video on the CRT monitor. I want to see the iMac display at full resolution and the CRT video monitor at its full resolution, at the same time. Is this possible with a 24" iMac that has the 7600GT video card? Or am I forced to get a more expensive Mac Pro system to accomplish this feat?
    Many thanks.
    G4 Cube   Mac OS X (10.4.8)  

    I wish to view full resolution standard video on a CRT video monitor.<<</div>
    As Zeb pointed out, your method is NOT the way to properly view FCP's output on an external TV monitor. To do it the right way, you'll first need to determine which video formats you'll be working with; all DV25 formats can be monitored via the Firewire output through a qualified DV device (camcorder, VTR or converter). All other formats will require the addition of a dedicated card, such as those offered by Kona and Decklink, or a box like the MXO by Matrox.
    -DH

  • How many times can you install FCP?

    Hello everyone, new to the forums here. I've searched throught he forums but couldnt find an answer to my question.
    I'm in the middle of installing Final Cut Studio 2 (waiting to put in the next disc) when my buddy came over and mentioned that you could only install FCP one time and never install it again on any other computer. This worries me because in January I was going to get a new Mac Pro and un-install FC from my Macbook Pro so I could use it on the new computer. Is this possible? Or once I install this on my laptop is it permanent?
    Thanks in advance for the help

    Ok so you can install it on as many machines as you like but can only use (or have one activated through registering) one at a time. I know this is a touchy subject with piracy and all, but I thought it would just be rediculous if I installed this on my laptop, and 6 months down the line wanted to install it on another computer that I own.

  • DVD Footage for FCP Edit - how to tell if NTSC or PAL?!

    Hi all, apologies if this seems like a stupid request but I have a job at the moment calling for me to extract footage from a DVD, edit in FCP, add a few bits from Motion etc., but I can't work out if the DVD is NTSC or PAL!
    I intend to extract the video (no issues with copyright) via DVDxDVPro but am unsure if the DVD has been encoded in NTSC or PAL. The footage it contains is from both the States (NTSC) and South Africa (PAL) so how do I tell? I don't want to go through a standards conversion if I can help it.
    I am keen to try to retain as much quality as possible (client can't provide tape) so also any thougts on the best output from DVDxDVPRo for FCP editing?
    Thanks all,
    Best wishes
    Michael

    Hi Thomas, that's it!
    Thanks for this - it clearly shows the TV standard and the resolution plus 4:3 etc., so everything I needed for confirmation.
    Glad I cheked because it was in Pal - thought the conversion in DVDxDVPro looked a bit ropey.
    This realy baffled me - seemed so simple but couldn't find a way to tell the standard. Learn something everyday...
    I am using DVCPro for export from DVDxDVPro - anyone thoughts on a better option?
    Thanks again for the answer - and so quick on a Sunday too!
    Kind regards
    Michael

  • Want to hide or mod FCP 6 Splash Screen

    Just want to hide the splash screen on my FCP system. I rent it to indy projects and I want to protect my serial. How can I access the Splash Screen Image? I've been able to mod the splash screen on all the other apps on the rental system but can not find or get to the Splash Screen for Color and FCP 6. I know that a real hacker can find my serial some how but I am not trying to block those geniuses. Just the lazy ones that are willing to go as far as copying or screen grabbing my Splash Screen and or About Screens to get a working serial. I know how to mod the Splash Screen to hide my serial and how to hide the app so the user can't get to the splash screen. I just don't know where the splash screen file is. I've read that it is in the .nib files? I just wanna hide my serial. Don't care if I mod it myself or install an app that does it for me. Any apple people or anyone else know what I can do to protect my product. I've also been told that the splash screen does not display the full serial but it soo totally does. Hey apple, please add the ability to hide this splash screen. Perhaps with it's own password to unlock and show again? OR, make splash screen hiding a universal ability in the OS. That would be sweet! Anyway,... ideas?

    Hey all. I have been able to mod the splash screen on all the apps in FCP Studio 2 except for FCP and Color. The other studio apps Splash Screens access a .psd file. The only files I've found in Color that seem like they might be the splash screen files are ft_splash.Isi, ft_splashEDU.Isi, ft_splashNFR.Isi and ft_splashVOL.Isi
    How do I open a .Isi file? If I can figure that out I can hide the serial number for Color but it still leaves FCP. Why do apps show the serial on the splash screen at all? What purpose does this serve?

  • FCP 6 no longer 'sees' my Sony HDR-HC7.  Works perfectly with iMovie HD

    I used to be able to capture from and print to my HC7. Setup was saved. Now, FCP doesn't 'see' the camera with the saved settings, or when I try setting it up again from scratch. Camera connection, driver, etc. are good in that the camera works perfectly with IMovie HD. Obviously I've messed something up in FCP, but I can't find it. Suggestions?

    Thanks for the response SDIllini, unfortunately when I do go the Disk Utility, my camcorder isn't even show for me to even repair the disk permissions. As monty jr stated, Sony was no help for me either, they also told me that I would need to contact Apple. The problem still remains unsolved though, it's as if the MBP just doesn't recognize the camcorder whatsoever. I'm open to any suggestions, have anymore?

  • FCP and Mavericks

    Hi,
    I have recently upgraded to Mavericks and am now realising that FCP has slowed down considerably. I'm using a mac pro with 10GB RAM and haven't had problems with it before. Any idea on possible solutions? Anything I could do to boost my system a bit and work more comfortably until I upgrade to FCP X (if that's compatible!)
    Here's my EtherCheck if that would be any help
    Thank You
    Hardware Information:
              Mac Pro (Early 2008)
              Mac Pro - model: MacPro3,1
              2 2.8 GHz Quad-Core Intel Xeon CPUs: 8 cores
              10 GB RAM
    Video Information:
              NVIDIA GeForce 8800 GT - VRAM: 512 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 1 day 5:55:10
    Disk Information:
              WDC WD2002FAEX-007BA0 disk0 : (2 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Disc 4 (disk0s2) /Volumes/Disc 4: 2 TB (493.89 GB free)
              ST3000DM001-1CH166 disk1 : (3 TB)
                        EFI (disk1s1) <not mounted>: 209.7 MB
                        Disc 2 (disk1s2) /Volumes/Disc 2: 3 TB (49.2 GB free)
              ST31000528AS disk2 : (1 TB)
                        EFI (disk2s1) <not mounted>: 209.7 MB
                        Disc 3 (disk2s2) /Volumes/Disc 3: 999.86 GB (3.26 GB free)
              ST31500341AS disk3 : (1.5 TB)
                        EFI (disk3s1) <not mounted>: 209.7 MB
                        disk3s2 (disk3s2) <not mounted>: 1.5 TB
                        Recovery HD (disk3s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. iPhone
              Apple, Inc. Keyboard Hub
                        Apple, Inc Apple Keyboard
              Generic Flash Card Reader
              Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Startup Items:
              HP USB EWS Gateway: Path: /Library/StartupItems/HP USB EWS Gateway
              HPlaserjet Trap Monitor: Path: /Library/StartupItems/HPlaserjet Trap Monitor
              MySQLCOM: Path: /Library/StartupItems/MySQLCOM
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.adobe.SwitchBoard.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [invalid] com.oracle.java.Helper-Tool.plist
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [invalid] com.oracle.java.Java-Updater.plist
              [System] com.wacom.pentablet.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
              [not loaded] com.spotify.webhelper.plist 3rd-Party support link
    User Login Items:
              Dropbox
              Spotify
              HPEventHandler
    Internet Plug-ins:
              Flip4Mac WMV Plugin: Version: 2.2.3.7  3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 11.0.01 - SDK 10.6 3rd-Party support link
              AdobePDFViewer: Version: 11.0.01 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
              QuickTime Plugin: Version: 7.7.3
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              Silverlight: Version: 5.0.61118.0 - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    3rd Party Preference Panes:
              PenTablet  3rd-Party support link
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              Growl  3rd-Party support link
              Perian  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              SuperDuper!:          Version: 2.6.4 - SDK 10.4 3rd-Party support link
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              CrucialMacScanner_UK:          Version: 1.0 - SDK 10.0 3rd-Party support link
                        /Users/[redacted]/Documents/Software/CrucialMacScanner_UK.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              Spin Doctor:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Toast 11 Titanium/Spin Doctor.app
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Disc 2: Disk size: 3  Disk used: 3
              Destinations:
                        TMMacpro2013 [Network] (Last used)
                        Total size: 21 
                        Total number of backups: 63
                        Oldest backup: 2013-05-28 23:04:49 +0000
                        Last backup: 2014-02-13 15:51:39 +0000
                        Size of backup disk: Excellent
                                  Backup size 21  > (Disk size 3  X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                 191%          Final Cut Pro
                   5%          diskimages-helper
                   4%          WindowServer
                   2%          Google Chrome
                   1%          backupd
    Top Processes by Memory:
              1.00 GB          Final Cut Pro
              338 MB          mds
              328 MB          mds_stores
              256 MB          Finder
              205 MB          com.apple.IconServicesAgent
    Virtual Memory Information:
              3.52 GB          Free RAM
              3.93 GB          Active RAM
              1.63 GB          Inactive RAM
              942 MB          Wired RAM
              12.92 GB          Page-ins
              0 B          Page-outs

    try turning off time machine when you're working in fcp.  Try disconnecting from network (pull ethernet cable or turn off airport).  Check write and read speed of all drives.  Try disconnecting all peripherals including any external drives.   Run diskutility, disk repair on all drives.   run diskwarrior on all drives.   (http://alsoft.com/)

  • XML file from '08 has a different aspect ratio in FCP 6?

    I have the new canon vixia hg 21 which is avchd and FCP 6 isn't recognizing it. Using Imovie to recognize the files works fine, the problem is that when you export from imovie '08 into FCP via xml, it imports fine, but I get a display issue with black bars surrounding the footage, only in the canvas. It appears fine in the viewer and in it's own sequence in the timeline. But when you mix the different camera footage together, the other being the Canon XH A1, it appears as a different aspect ratio??? What the? and for the life of me, I've re imported using 16:9, no difference...I have no idea what's going on.
    Any help would be greatly appreciated!

    You should really take this to the Final Cut Pro forum as the codecs and the interface is different for Final Cut Express.

Maybe you are looking for

  • Help i just want my ipod to turn on

    I tried to lock my screen so i changed the lock combo to my birthday just seeing wat it would do then i go to unlock it and it wont so i just turn it off untill i can get to my computer to unlock it but now it wont turn on at all. I charged it last n

  • OS X 10.5.6: High RAM usage corrupts Audio Playback and Volume Control

    Software Effected or Related: iTunes 8.1, Quicktime 7.4, Adobe CS3 Description: Basically any RAM intensive operation seems to corrupt the sound driver so that static is injected into the stream. In addition, volume control fails to function, with de

  • JS error using JQuery Columnizer Plugin

    I'm not sure how many of you are familiar with this plugin for JQuery, but Columnizer (http://welcome.totheinter.net/columnizer-jquery-plugin/) is a plugin that allows you to create multi column text from one div. I know that can now be done CSS3, bu

  • Is that possible to call a static library?

    Hi, I'm using JNI to call a third party static library (.a file), but I always got the java.lang.UnsatisfiedLinkError. I'm not sure whether it is possible to invoke APIs from static c libraries. Anyone here has this kind of experience ? Here is my sc

  • PR Release strategy to be assigned to user

    Hi Friends, I have created the release procedure for releasing PR. Now I want that to assing to the user id. Can someone please tell me which paramter or role that i need to assign in the user profile. Regards, Wasim.