FCP Video export/sync problems. HELP!

Hi,
So i am using FCP 7.0.3. I have used it a fair bit.
However recently i am trying to re-cut an edit which my brother shot to make it shorter and edit out the less nice shots so i can upload it to a new website.
I editied, the already exported file, which was all fine. Then i watched back the finalised exported file and the video is completely out of sync with what it was showing me in the fcp playback viewer. Suprisinngly diffiucult to describe but basically its like the video file has a delay after it is exported and shows completely different shots to the ones i chose and it was showing in the edit timeline. I have no idea what to do, anyone had this before? Anything i can do about it? Obviously the first section of the video is fine as it plays from the start as its the original but after the first chunk i cut out and there after all the clips are different shots to those that it was showing in the edit...hope you understand.
Any help would be greatly appreciated.
Cheers
Toby

Hi Micheal,
Thansk for the help but i checked the footage and its pro-res 422. Its also saying it is all 25fps...
Any other ideas?!
I could reformat it and change conform it to 25 fps again anyway then re-cut it, maybe that would be worth trying?
Cheers

Similar Messages

  • IPad syncing problem - HELP!

    iPad sync problem - HELP!  I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)"  and yet I seem to have plenty of space on the iPad.  This just started today.  I even tried deleting some things to make even more room, but it didn't help.  Any ideas??? 
    I was thinking of restoring, but I've never done it...  should I? 
    thank you!

    Hello florafromnv,
    Welcome to Apple Support Communities.
    The following article addresses how to resolve the issues related to this message:
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/TS1503
    Regards,
    Jeff D.

  • Audio Going out of sync problem, Help Please

    Hey all.
    So I have just filmed about 3 hours worth of gaming videos using XSplit recorder,
    in a mp4 format, and when I played it back using VLC it all seemed fine.
    However I went to import it into premiere to start editing it I noticed the sound was completly out.
    I have recorded some audio and video times listed below to show the sync times and how they are out.
    Video          Audio
    00:41:24  -  00:44:09
    47:46:25  -  50:11:12
    As you can see it gets worse over time.
    I could manualy do a time shift on the audio to align it but thats a lot of work as I have multiple clips to edit and would like a proper fix for it
    I did some quick research and found one fix was to make the sequence settings the same as the video file, but that didnt work for me.
    also trying to conform the video file also didnt help me out.
    Anyone have any other ideas?
    Thanks In Advance
    Thomas

    >gaming videos using XSplit recorder
    That is a new one to me, but other messages concering screen capture software discusses LOTS of editing problems
    Some examples... (may or may not help, but at least some ideas based on other problems)
    These are for Premiere Elements, but may help with PPro
    Fraps & Elements http://forums.adobe.com/thread/871095
    -and more Elements http://forums.adobe.com/thread/943772
    -and yet more Elements http://forums.adobe.com/thread/967201
    Camtasia http://forums.adobe.com/thread/836800
    -and http://forums.adobe.com/thread/775288
    -and http://forums.adobe.com/thread/453044
    -and http://forums.adobe.com/message/3202148
    Techsmith codec http://forums.adobe.com/message/3692768
    -and http://forums.adobe.com/thread/1046914?tstart=0
    BB Flashback http://forums.adobe.com/thread/1074014

  • E66 with Video/audio sync problem

    Is there someone where the E66 does NOT have the audio/video sync problem?
    Test:
    Record your finger tapping on the table, then check if Video and Audio are in sync
    Mine has 1 sec or more afer a few seconds of recording

    I called Nokia care,
    They never heard of the problem!
    They did not even know there was a firmware upgrade last feb.
    Furthermore on the site, still frimware from nov last year is advertised as latest!
    I will go to a service point, or return the phone to the store.

  • IPod Video Connection & Sync Problem on Abit IS7 Windoze Pentium 4

    Hello,
    I'm posting this to help anyone else out with the same problems. I'm using a Pentium 4 2.8ghz Processor on a Abit IS7 Motherboard running Windoze XP Home and 1 Gig DDR400.
    The Motherboard is equipped with USB 2.0's and 1394 Firewire ports. I got a 30 Gig Video ipod the other day and was having a nightmare connecting it and syncing with iTunes.
    It was hanging painfully slow and would sometimes eject the ipod, and lock up iTunes. I tried the 5 R's on the ipod, even reformatting the ipod. Still the same deal. For Kicks I plugged the ipod into my old G3 300mhz Blue & White Powermac. And it sync'd with itunes, and mounted fast. Even with the old USB 1.1's. That's when I knew exactly where my problem was.
    Today I went to Stooples and Bought a Belkin F5U219v1 3 port USB 2.0 Card. My problems were instantly solved for the cost of a decent meal..
    Specs of Pentium 4
    P4 2.8Ghz 800mhz FSB
    Abit IS7 Motherboard
    1 Gig DDR400
    Radeon 256meg PCI Video
    Seagate SATA 400Gig HD
    XP Home SP2
    Powermac Specs
    G3 300mhz Rev1 Motherboard
    768Meg Ram
    20 Gig IDE Hard Drive
    16 Meg Rage128 Video
    OS 10.3.9
    This drove me deeper into the insanity that already consumes my life.. I hope this will help out someone else before they too go completely nuts.

    Yes all my other USB equipment works on the motherboards USB Ports. Laser Printer, Mouse, Razr Sync Cable, and a couple others too.
    I was lost... When I figured out that it was the PC not my iPod I was beyond PO'd at myself for not seeing it earlier.
    Here's a tip that card runs for 30 dollars, at staples Take 3 old ink carts with you, and you can knock 9 dollars off the price! It's a real screaming deal when you do that! If you see a Hp or Lexmark printer in the garbage nab the carts! Just watch your hands and clothes.
    Glad to help someone else, and those two boards are REALLY Similar, they have the same disease crappy Intel Chipset syndrome. Last intel machine for me, when I upgrade I'll most likely go for a AMD, or maybe a new PowerMac If that's in the budget. At least the mac will hold its value for more than 10 minutes.

  • IPod/iPhoto syncing problem HELP!!

    I am writing this in desperation. I tried to sync my 30GB iPhoto library onto my iPod video. iTunes started filling up my hard drive. I had 8GB of free space on my hard drive, and now I have nothing. However 25GB of my iPhoto stuff made it to the iPod. I am wondering - does syncing iPhoto with iPod make iTunes double up the iPhoto? Does it place the entire library in the iTunes folder?
    If I freed up more space, and the syncing completed, would the hard drive get back to its original state?` Is iTunes just occupying the space for syncing reasons?
    Please help!! Thanks so much!!!

    I am also having this problem with an 80G iPod. Anyone out there with a suggestion?

  • Embedded Video Audio Sync Problem

    I have been exporting Flash Video from Adobe Premiere
    Elements 3.0. I import the .FLV into Flash 8 as embedded video. The
    published .SWF works fine, audio and video start in sync and stay
    in sync, but about 3/4 through the video, audio stops.
    This occurs no matter how short or long the exported clip.
    I did my best searching through these forums, looking for an
    answer to this issue, but have had no success.

    Do you need to embed the FLV file in the SWF file? I would
    recommend playing the FLV as an external file. If you need to use
    embedded video, make sure the frame rates are identical (SWF and
    FLV). I can't remember if Premiere Elements enables you to output
    with Raw audio for FLV files, but Flash 8 (or CS3) will recompress
    an embedded video's audio track on publish/export--so, try to use
    Raw if you can to avoid recompression. This might have something to
    do with your problem too, the recompression of the MP3 audio track
    in your original FLV when re-exporting as embedded video in the
    SWF. (Your audio stream setttings in the Publish Settings control
    the quality/recompression of your FLV output when embedded in the
    SWF.)
    HTH.

  • Video audio sync problems resolved

    I've solved my audio syncing with video problems.  Maybe it will help you find your solution. 
    I recently installed Leap Motion but it said I needed to update my video driver.  I thought my driver was up to date so for both my computers that had different video cards I updated and the syncing issues were gone.
    So as far as helping you get the right update I won't be of much help.  But at least this will give everyone a direction to look in and find their own solution.
    I hope this helps and good luck!

    Hi there
    In addition to what Leslie offered (which is good advice) I've seen others report success by staging the audio to begin slightly after the slide starts. Perhaps .3 .4 or .5 seconds into each slide.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • HDV 720p24 Export / Conversion Problems - Help!

    Greetings all,
    So I'm pulling my hair out over this problem.  I have some footage that was captured using the following settings from a JVC camera:
    Apple HDV 720p24, 1280 x 720 (1248 x 702) Millions
    16-bit Integer (Little Endian), Left, 48.000kHz
    16-bit Integer (Little Endian),Right, 48.000kHz
    FPS: 23.98
    Data Rate: 19.89
    I converted to ProRes, and brought it into Final Cut.  All is well.  The footage looks GREAT in final cut... I was able to do my edits and all that fluff and now I'm trying to export to an H.264 file for Vimeo / YouTube.
    However, I CANNOT get something that works.  I've done so many tests at this point its rediculous.  I've read through all the forums I could and still nothing is helping.
    My main problem is crazy jagged edges over all the video (some call them mouse teeth).  The audio is fine though... at least I got that right.
    I've tried de-interlacing but it didn't help.  I don't get why IN FINAL CUT the video looks so pristene, but any sort of export (even a 'send to compressor') yields a bunch of jagged and pixalated mumbo-jumbo.
    Please Help! 

    Thanks for the tips guys!  Those shortcuts were helpful - and I was able to confirm that my settings indeed matched.
    I think I fixed my issue though!  My problem was in my render settings.
    Sequence--> Settings--> Render Control
    Mine was set by default to 33% for some reason.  I've done many projects in FC, but this was my first with the JVC HDV 720p stuff - so i'm guessing when FC created the session to match the video, it changed that setting as well.  I bumped it back up to 100% and all is well.
    I'm rather surprised though that FC won't render at 100% when you export or send to compressor or anything of that sort.  So anyone having the same "jagged pixelation" on output - thats probably the issue.
    Thanks again guys.  I wouldn't have stumbled upon that w/out your direction.

  • FCP, FlipMac/Squeeze sync problems

    i am exporting my timeline to flip mac and also sqeeze to get a .wmv and the video/audio is out of sync a few minutes into the 9 minute program. any suggestions? i have tried this about 2 dozen times now with diff. compression settings. i have exported as sorenson codec, qt movie, etc. same problem.

    What have you done to address the problem?
    It's really hard to troubleshoot issues when people offer no information.
    For example:
    What codec is the timeline?
    What effects are being applied?
    Have you done an audio mixdown?
    Have you tried exporting a self-contained file using 'current settings' then converting that file to wmv?
    and so on.
    x

  • Shared Photostream Sync Problems - HELP!

    Hi - I have an iphone 4 with ios6.
    I have set up several shared photostreams and added photos to these and invited subscribers.All that seemed fine, but here's the problems I've experienced and would be interested to know if this is a common/known issue:
    1) On one photostream, I have added 187 photos and on the device I added the photos from, I can see all 187 photos. However subscribers can only see 99 of the photos. I looked on my iPad, and I too can only see 99 photos on that device. So...... I deleted the photos and re-added. This time I can see the 187 photos on the source device, and subscribers can only see 129! Is there a known issue with syncing of photos through to a shared photostream.
    2) On a second photostream, I added 35 photos. Subscribers could see all photos, as could I on all devices. One hour later, the photostream is empty on my source device and for all subscribers.
    3) A friend added me as a subscriber to a photostream of his. I cannot see of the photos despite other subscribers seeing them.
    4) Lastly, I deleted one shared stream and started again, but yet again, subscribers can only see a portion of what I have added.
    Any advice?
    Thanks

    Hello jordan0101,
    And welcome to Apple Discussions!
    This article should be able to help you.
    http://support.apple.com/kb/ht1855?viewlocale=en_us
    okay, i went to take a band off my itouch, when you do that you click the box where the check is and it will disappear that way when you sync it will take that particular artist off your itouch. but when i do that it still stays on my itouch.
    That will only remove the song(s) if you have the *Sync all checked songs and videos* option enabled from under the iPod's Summary tab.
    B-rock

  • Sync problems. help?

    okay, i went to take a band off my itouch, when you do that you click the box where the check is and it will disappear that way when you sync it will take that particular artist off your itouch. but when i do that it still stays on my itouch. my problem is i cant add or delete music off my itouch and i dont know why its doing this or how to fix it.

    Hello jordan0101,
    And welcome to Apple Discussions!
    This article should be able to help you.
    http://support.apple.com/kb/ht1855?viewlocale=en_us
    okay, i went to take a band off my itouch, when you do that you click the box where the check is and it will disappear that way when you sync it will take that particular artist off your itouch. but when i do that it still stays on my itouch.
    That will only remove the song(s) if you have the *Sync all checked songs and videos* option enabled from under the iPod's Summary tab.
    B-rock

  • New syncing problem - HELP!

    Suddenly, I cannot sync my nano. Didn't have a problem before. Have turned firewall off and back on. iTunes works fine until I plug in to sync, and then it crashes. Message: "iTunes has stopped working" immediately appears when I try to sync. Very aggravating. BTW - have upgraded to the latest version of iTunes. Am using HP laptop using Vista Home. Thanks for any help.

    BTW - have upgraded to the latest version of iTunes.
    Let's doublecheck that. In iTunes, go "Help > About iTunes" and wait for the version number to scroll up from the bottom of the screen.
    Does it say 10.1.0.54 ? If so, we need to update you to 10.1.0.56 .
    10.1.0.56 won't appear for you in Apple Software Update for Windows if you already have 10.1.0.54 installed. So you'll need to get the installer from the Apple website as per the following document:
    [iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

  • Hotmail sync problems - HELP! (Nokia N8 - Anna )

    Hi
    I got a problem with my hotmail sync.
    I deleted my account without wanting to, and now i want it back - before I could sync all my folders in the hotmail account, but when i'm trying to make a new account it only syncs the inbox/sent maps? The other maps doesn't even appear on the screen when I go to maps.
    How do I set up the account in a way so all maps are sync?
    Please help!

    I had two hotmail accounts on my nokia c7. one of them stopped to synchronize. I deleted it and I tryed to reconfigure again but it will not let me. I did a soft reset, a hard reset, installed all updates (anna), but still does not leave me. I put the sim in another nokia c7 and let me set up the account correctly. ¿¿¿¿¿¿????????¿¿¿¿¿¿¿¿¿¿¿????????????¿¿¿¿¿¿¿¿¿¿¿¿?​???????????
    In nokia care they told me to delete the account in messaging web, before configuring the account in my phone, but it did not work

  • Syncing problem - HELP!

    Hey all!  My ipod nano, 6th generation, isn't syncing.  It will say "syncing" but isn't doing anything.  What's up??!

    Hello Lily,
    Thank you for the details of the issue you are experiencing with your iPod nano (6th generation).  I recommend following the 5 Rs for an issue like this:
    The 5 Rs: Reset, Retry, Restart, Reinstall, Restore
    Remember these five basic suggestions if you have a problem with iPod nano. Try these steps one at a time until your issue is resolved. If one of the following doesn’t help, read on for solutions to specific problems.
    Reset iPod nano. See “General suggestions,” below.
    Retry with a different USB port if you cannot see iPod nano in iTunes.
    Restart your computer, and make sure you have the latest software updates installed.
    Reinstall iTunes software from the latest version on the web.
    Restore iPod nano. See “Updating and restoring iPod software” on page 56.
    You can find these steps on page 52 of the iPod nano User Guide:
    iPod nano (6th generation) User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1551/en_US/iPod_nano_6thgen_User_Gu ide.pdf
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for