FCP will not read project, access denied

Please Help
I was fussing around with VJ software that wasn't reading one of my quicktime movies made in FCP 5.0 (just raw footage). I had to change the codec to .mov so that the VJ software would read the file. But now, the whole project from which that file was taken will not open up. The error says "access denied". Did I change the permissions for the project when I changed the codec by re-routing the info somehow?
Thanks

Some more info:
At the time my external hard drive was attached to someone else's computer, but I just checked the FCP project's info and the file is not locked, so that doesn't seem to be the problem. Also, when I changed the QKTM's codec, a window popped up saying that "if you make this change, your document may open in a different application".
Any ides?

Similar Messages

I updated to FCP X 1.6, now my projects and events will not read

I chose the option update projects and events upon launching 1.6. Now my hard drive is being read as a camera, and I can't load my old events and projects. Strangely when I first open FCP, it appears to read the projects and events, and opens showing the drive and events, but then they simply disappear. Any ideas how to load the events and projects?
P.S. I tried going back to 1.5, but now that I chose the update events it will not read.

You have a folder at the root of your hard drive that is confusing FCP X.
Common names are "Private", "DCIM", "Video", and others.
Rename or put the offending folder inside another folder (i.e. not at the root of the hard drive).

FCPX crashed and I reported it here. Tom Wolsky suggested I trash prefs, perform an fsck, reboot and redownload FCPX from the App store. The reboot was okay but Safari will not let me access the App Store to redownload FCP. I'm running 10.6.8 but the App

FCPX crashed and I reported it here. Tom Wolsky suggested I trash prefs, perform an fsck, reboot and redownload FCPX from the App store. The reboot was okay but Safari will not let me access the App Store to redownload FCP. I'm running 10.6.8 but the App Store icon is grayed out. I get a "Safari doesn't recognize addresses starting with macappstore."
How do I get to the App Store to get FCPX back? I'm using the Trial version now.

How are you linking to the App Store from Safari? From this page?
http://www.apple.com/finalcutpro/trial/

My ipod touch is being read as just a simple camera and will not let me access it, how does one go about fixing this problem

My ipod touch is being read as just a simple camera and will not let me access it, how does one go about fixing this problem? My screen has recently cracked and i need to retrieve my music from it but cant do so when my computer is reading it as a camera and only showing me its pictures.

Here:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Also try another computer.

HT201269 if my iphone is crushed and will not read onto itunes/sync, is there anyway to access the data and back it up?

if my iphone is crushed(droped and ran over...) and will not read onto itunes/sync, is there anyway to access the data and back it? i really dont want to lose the progress in the apps that i play often....

i wasnt expecting to acompish it... just wondering if there was another method, and was trying to have a little hope but thank you

OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi,
I have one client and one server. In both hosts I created an OS-user named User1.
The user have been given various role under the prefix SQLServer2005.
The default instance of SQL Server and instance (background-process) of
Analysis Service are also run under User1.
I connected via Management Studio to Analysis Service directly in the
server. I set the permission to access Analysis Service to Everyone.
This means everyone should be able to use Analysis Service. I have set
ODBC data source to the server. Testing was successful.
I created a project to create a cube. The tables are fairly small (total 300 MB, biggest one 290).
On project setting (created at client) I set the server host as
deployment target. I managed to deploy project when all I have are Data
Source and Data Source Views.
But on deployment I always failed. The errors remain the same, begins with
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
I have tried 4 combinations of Impersonation :
(A) Use a specific username and password
* in which I supply User1 and the password of User1
(B) Use the service account
(C) Use the credentials of the current user
(D) Default
Why is this? The server does certainly exist. I think the error message is wrong.
I have seen 3 posting that seems related. One of them say the solution is giving the right impersonation, but gave no detail. About the privilege, User1 are granted the role of
SQLServer2005MSOLAP. What is the solution?
Thank you,
Bernaridho

I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

IPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!

iPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!
Help would be appreciated.

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

"File does not exist or access denied"

Hi
I am new to FDM. I am trying to import a .csv file in FDM using Import Format Builder. When i select the file in the Inbox folder of my application, it gives me the message "Error: File does not exist or access denied".
Any ideas why this error is coming. I have been struggling with this error for some time now.
Thanks in advance

Hello,
I do not think it has anything to do with the configured ID for the AppPool and would not suggest tinkering around in it, as it can damage the application significantly.
Some concerns that I have are the following:
1. When you get the error, do you get a 'white' fish?
2. What does your UserError Log state? Clear it and reproduce the issue and post the results.
3. What does the Import Log state? (Import button on the View File tab of the Import Fish)
Thank you.

I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password

I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password even though itunes recognizes my password

This has been posted for almost 2 weeks and not one reply. Thanks a bunch! As a newbie to OOo and Mozilla, I am not impressed with responsiveness to support needs with either. So, the future of my new experiment with going non-Microsoft remains an open question.
Oddly enough, the problem mysteriously went away. I have followed the same routine and changed no settings. Suddenly all of the downloaded spreadsheets were no longer read-only. So I consider the matter resolved.

Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

HT4943 I am deploying to Afghanistan and I will not have wifi access. I will have a hardline access to internet. How do I sync my apps, newsstand, etc without wifi connection?

I am deploying to Afghanistan and I will not have wifi access. I will have a hardline access to internet. How do I sync my apps, newsstand, etc without wifi connection?

About the only other way I can think of is to have a computer with you or use one there, if you can put iTunes on it and download all your new stuff to the computer, then sync your iPad to that computer.
In switching computers you will lose previous content, but, as I understand it anyway, downloaded content will be the same as long as the same apple ID is used.

[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.

I using SQL 2000 on Server 2012 in named instance. when i connect locally, it's ok, but when try to connect from network it generates error [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.

Hi Sayed Abdul Latif,
As other post, SQL Server 2000 was out of support since April,2013. You can try to install SQL Server 2005 or later version. In addition, since the issue regards SQL Server Data Access. I will help you post the question in the related forums. It is appropriate
and more experts will assist you.
According to your description, you can only connect to SQL Server locally, I recommend you check if the TCP/IP and Named Pipes are enabled in SQL Server Configuration Manager. And the SQL Server is set to allow remote connection. Then restart the SQL Service
and check if you can connect to SQL Server remotely.
Additionally, we also need to verify if the SQL Server named instance is in a cluster, and connect to it by using the "servername\instancename" syntax, then you receive the above error message. If yes, you have to hardcode the TCP port or the Named Pipe
of the SQL Server named instance. For more information, you can review the following article.http://support.microsoft.com/kb/888228/en-us
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

SQL Server does not exist or access denied - periodic error

Hi There,
For the last week or so, I have been getting periodic errors on my sites powered by MSSQL databases. The error message is as follows:
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
Usually, a quick refresh, and everything works fine again.
My host doesn't know what has caused the issue, but has dug up this microsoft link: http://support.microsoft.com/kb/907264
Most of that tech speak is beyond me! I use Dreamweaver - does anybody know if the standard dreamweaver connections or cursors contravene the advice on that page, and if so how to fix it?
If not, does anybody know where to look to solve this issue?
Thanks,
Dan

I had this same problem and on a hunch I deleted the brackets
so that the connection string instead of being,
"Persist Security Info=False;Data
Source=[THESERVER\SQLEXPRESS];Initial Catalog=[AdventureWorks];User
ID=[ATEST];Password=[kjdkjdkjd]"
is now,
"Persist Security Info=False;Data
Source=THESERVER\SQLEXPRESS;Initial Catalog=AdventureWorks;User
ID=ATEST;Password=kjdkjdkjd"
This was in Dreamweaver 8.

In my system preferences, my sharing folder will not let me access it. All my photo booth share button is grayed out. One more thing, My photoshop will not let me import any photographs. I believe this all has to do with this. Any way to fix this issue?

In my system preferences, my sharing folder will not let me access it. All my photo booth share button is grayed out. One more thing, My photoshop will not let me import any photographs. I believe this all has to do with this. Any way to fix this issue?

The iTunes Store has no phone support and never has. Contacting them has always been via web form. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Adobe Acrobat XI will NOT read aloud any pdf files

Ever since I upgraded to Marvericks, Adobe Acrobat XI will NOT read aloud any pdf files. How can I fix this. It previously worked fine.
I create tagged pdf files in InDesign to be compatible with 508 accessibility standards.The files read aloud on a Mac with OS X Lion but not on Mavericks.

no, still no resolution. It is very frustrating. I did have one 8 page document that it will read the first page but nothing else.
Did you find an answer?

FCP will not read project, access denied

Similar Messages

Maybe you are looking for