FCP won't open after I tried to install trial software
I downloaded a trial copy of master perfection suite and another Bias product just to check it out. Now Final Cut Pro won't open - it brings up a box that gives me the option to authorize, continue etc, but when i do anything, the box just appears again. I have to Force Quit FCP since everything's grayed out. I've trashed prefs, repaired permissions, restarted but it hasn't helped.
Come on, you've been on the board long enough, You should know better. When you have a stable OS/Application combo, clone your startup drive. This way you can quickly restore your system to it's previous state.<<<</div>
Actually, I didn't know this. I'll have to look into how to do this.
I called Bias tech support - they were great. The suggestion to remove the files from the plugin folder was close - there was a 'components' folder in there as well that needed to go. Once that was removed, I restarted and FCP opened without a problem.
Similar Messages
-
My appleworks spreadsheet doc won't open after repeated tries
The apple work file won't open and I get a flag asking if I want to report the problem.
I will verify permissions and fix, but does anyone have any other suggestions?
Thank you.Good afternoon Jim. I had the same problem:
"Lightroom encountered an error when reading from its previous cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
Thank you very much for your recommendation. It worked great! -
Xorg won't start after unsuccessfully trying to install bumblebee
Before i tried to install bumblebee I was just running on the integrated intel graphics chip (intel HD graphics 3000). During the installation of bumblebee, I first tried with the nouveu driver for the nvidia graphics card, but that resultet in an error when trying to run anything with optirun. Then i tried the proprietary nvidia drivers, but after a reboot the X server would not start.
I have removed both nvidia drivers, nouveu drivers, bumblebee and set graphics to integrated in the bios again, but the problem persists. Here is my Xorg log file:
[ 22.722]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 22.722] X Protocol Version 11, Revision 0
[ 22.722] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 22.722] Current Operating System: Linux eddie 3.9.9-1-ARCH #1 SMP PREEMPT Wed Jul 3 22:45:16 CEST 2013 x86_64
[ 22.722] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=95ccfb37-7f71-4703-8aa0-e3d7b53aba66 ro quiet
[ 22.722] Build Date: 01 July 2013 10:48:42AM
[ 22.722]
[ 22.722] Current version of pixman: 0.30.2
[ 22.722] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.722] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.722] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 13 16:28:59 2013
[ 22.839] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.951] (==) No Layout section. Using the first Screen section.
[ 22.952] (==) No screen section available. Using defaults.
[ 22.952] (**) |-->Screen "Default Screen Section" (0)
[ 22.952] (**) | |-->Monitor "<default monitor>"
[ 22.952] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.952] (==) Automatically adding devices
[ 22.952] (==) Automatically enabling devices
[ 22.952] (==) Automatically adding GPU devices
[ 23.083] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 23.083] Entry deleted from font path.
[ 23.084] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 23.084] Entry deleted from font path.
[ 23.084] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 23.086] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 23.086] Entry deleted from font path.
[ 23.086] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 23.086] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 23.086] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.086] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.099] (II) Loader magic: 0x7fdc20
[ 23.099] (II) Module ABI versions:
[ 23.099] X.Org ANSI C Emulation: 0.4
[ 23.099] X.Org Video Driver: 14.1
[ 23.099] X.Org XInput driver : 19.1
[ 23.099] X.Org Server Extension : 7.0
[ 23.101] (--) PCI:*(0:0:2:0) 8086:0116:1025:0504 rev 9, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00002000/64
[ 23.122] Initializing built-in extension Generic Event Extension
[ 23.122] Initializing built-in extension SHAPE
[ 23.122] Initializing built-in extension MIT-SHM
[ 23.122] Initializing built-in extension XInputExtension
[ 23.122] Initializing built-in extension XTEST
[ 23.123] Initializing built-in extension BIG-REQUESTS
[ 23.123] Initializing built-in extension SYNC
[ 23.123] Initializing built-in extension XKEYBOARD
[ 23.123] Initializing built-in extension XC-MISC
[ 23.123] Initializing built-in extension SECURITY
[ 23.123] Initializing built-in extension XINERAMA
[ 23.123] Initializing built-in extension XFIXES
[ 23.123] Initializing built-in extension RENDER
[ 23.123] Initializing built-in extension RANDR
[ 23.123] Initializing built-in extension COMPOSITE
[ 23.123] Initializing built-in extension DAMAGE
[ 23.123] Initializing built-in extension MIT-SCREEN-SAVER
[ 23.123] Initializing built-in extension DOUBLE-BUFFER
[ 23.123] Initializing built-in extension RECORD
[ 23.123] Initializing built-in extension DPMS
[ 23.123] Initializing built-in extension X-Resource
[ 23.123] Initializing built-in extension XVideo
[ 23.123] Initializing built-in extension XVideo-MotionCompensation
[ 23.123] Initializing built-in extension XFree86-VidModeExtension
[ 23.123] Initializing built-in extension XFree86-DGA
[ 23.123] Initializing built-in extension XFree86-DRI
[ 23.123] Initializing built-in extension DRI2
[ 23.123] (II) LoadModule: "glx"
[ 23.206] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.376] (II) Module glx: vendor="X.Org Foundation"
[ 23.376] compiled for 1.14.2, module version = 1.0.0
[ 23.376] ABI class: X.Org Server Extension, version 7.0
[ 23.376] (==) AIGLX enabled
[ 23.376] Loading extension GLX
[ 23.376] (==) Matched intel as autoconfigured driver 0
[ 23.376] (==) Matched vesa as autoconfigured driver 1
[ 23.376] (==) Matched modesetting as autoconfigured driver 2
[ 23.376] (==) Matched fbdev as autoconfigured driver 3
[ 23.376] (==) Assigned the driver to the xf86ConfigLayout
[ 23.376] (II) LoadModule: "intel"
[ 23.416] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.511] (II) Module intel: vendor="X.Org Foundation"
[ 23.511] compiled for 1.14.2, module version = 2.21.14
[ 23.511] Module class: X.Org Video Driver
[ 23.511] ABI class: X.Org Video Driver, version 14.1
[ 23.512] (II) LoadModule: "vesa"
[ 23.512] (WW) Warning, couldn't open module vesa
[ 23.512] (II) UnloadModule: "vesa"
[ 23.512] (II) Unloading vesa
[ 23.512] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 23.512] (II) LoadModule: "modesetting"
[ 23.512] (WW) Warning, couldn't open module modesetting
[ 23.512] (II) UnloadModule: "modesetting"
[ 23.512] (II) Unloading modesetting
[ 23.512] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 23.512] (II) LoadModule: "fbdev"
[ 23.512] (WW) Warning, couldn't open module fbdev
[ 23.512] (II) UnloadModule: "fbdev"
[ 23.512] (II) Unloading fbdev
[ 23.512] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.512] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 23.568] (++) using VT number 7
[ 23.668] (EE) No devices detected.
[ 23.668] (EE)
Fatal server error:
[ 23.668] (EE) no screens found(EE)
[ 23.668] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 23.668] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 23.668] (EE)
As you can see it appears that it can't find any screen.
I would try to reinstall Xorg, but for some reason i can't get internet access from the terminal neither wired nor wireless even though the wicd daemon is running as a systemd service.
Last edited by avh (2013-08-13 13:31:12)swaraj wrote:
See if this article helps you: https://wiki.archlinux.org/index.php/NV … IA_Optimus
I had the same problem and it certainly solved all my issues.
The thing is, it worked fine for me just using the intel driver. Now I have removed both nvidia and noveau drivers again, but it still dosen't work. Also graphics is set to integrated in BIOS. -
FCP won't open after upgrading to 10.3
After upgrading to 10.3 FCP keeps crushing every time I try to open it.
Here is how it happens:
1. First it writes this message:
2. After clicking either Reopen or Don't Reopen, it shows this message:
3. Then after clicking OK this message appears:
And when I hit OK in order to update the library, it crushes:
I am clueless. No solutions so far.
Any suggestions?Any time an application crashes, it's good practice to clear your preference files since those files get updated continually.
When you launch Final Cut after hearing clearing preferences, it should open to a fresh, empty library. If you then navigate to the personal library and it crashes the application, you can be pretty certain that the library is corrupted. At that point, I'd once again clear the FCP preferences an then close. In the Finder, navigate to your Final Cut Backups folder (usually in Movies) and double click the library that's the most recent prior to the start of your permissions problems.
If opening/updating the library backup also crashes Final Cut, shut down the system and restart in Safe Mode. After it completes the log-in process, restart and (once again) clear FCP prefs. Restart your computer and try again.
If none of this works, you could attempt to rebuild your user account – or use the new one as a dedicated editing account (with Fast User Switching enabled it wouldn't be too inconvenient). Sorting out user accounts is tedious and probably should be done by someone who's successfully done it before. It's entirely up to you, but if it came to this I'd either use the new account for video, or I'd do a clean install of the OS. (Naturally, you'll want to have a complete backup and critical settings documented before you do that.)
Russ -
FCP won't open after electrical storm
I live in Denver and we just experienced an electrical storm that seems to have hurt my Mac. The ethernet ports aren't working and when I try to open FCP, it starts and then quits. I have tried everything to fix the issues but to no avail. I have re-stalled OSX and FCP. The computer was off during the storm, so I'm not sure why it's causing problems. Nothing else seems to be affected other than the ethernet and FCP. Any ideas??? Thanks!!!
When you crash, you get the option of Reporting to Apple? Take that and copy this section of the log:
Command: Final Cut Pro
Path: /Applications/Final Cut Pro HD.app/Contents/MacOS/Final Cut Pro
Parent: WindowServer [117]
Version: 5.1 (5.1)
Build Version: 4
Project Name: FCPApp
Source Version: 602161028
PID: 1460
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
Thread 0 Crashed:
0 ...lCutPro.Plugins.QTRtEffects 0x061eea90 KGSetQTRtResFile(unsigned char, short*) + 72
1 ...lCutPro.Plugins.QTRtEffects 0x061f5b08 RTEffectComponentRegister() + 96
2 ...lCutPro.Plugins.QTRtEffects 0x061e521c PluginStart + 2028
3 com.apple.FinalCutPro 0x001b23e0 DispatchRegisterMessage(void*, void*) + 104
. - buncha info -
25 com.apple.FinalCutPro 0x002c10a8 main + 64
26 com.apple.FinalCutPro 0x00002c24 _start + 340
27 com.apple.FinalCutPro 0x00002acc start + 60
Thread 1:
0 libSystem.B.dylib 0x9002c128 semaphorewait_signaltrap + 8
That's the kinda thing we need...But only the crashed section, not the entire log - like the example above, look for Thread XX Crashed and copy that section and paste it into a post here.
BUT NOT THE ENTIRE LOG, please
I fear it may be something bad bad bad with your hardware, though...
Patrick -
Lightroom Won't open after repeated tries
I am unable to open Lightroom and get the following message each time:
"Lightroom encountered an error when reading from its previous cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
It does not fix it the next time and I am unable to open Lightroom. Please help!Good afternoon Jim. I had the same problem:
"Lightroom encountered an error when reading from its previous cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
Thank you very much for your recommendation. It worked great! -
Safari 1.3.2 won't open after QuickTime 7.2 install
Safari 1.3.2 had been working reasonably well until I updated to Quicken 7.2. Now when I try to open it, the icon and/or the open window shrinks and expands (or bobbles, jumps up and down, etc.). It will not open. (I've begun to notice a few other applications doing the "Safari bounce" when I try to open them. No, I didn't note the apps' names.) I've read all the posts and replies re this problem, but the bulk of the posts seem to be for OS X 10.4. I've repaired and verified the permissions; checked the Crash Log for Safari–– no current logs listed; and checked the System Profile's Console Log for Applications. A sample follows; if it's helpful, I'll give you the whole thing.
Aug 2 10:01:51 J-L-Pasalichs-Computer kernel: AppleNMI mask NMI
Aug 3 14:50:19 J-L-Pasalichs-Computer kernel: System Sleep
Aug 3 14:50:24 J-L-Pasalichs-Computer kernel: System Wake
Aug 3 14:50:24 J-L-Pasalichs-Computer kernel: Wake event 0020
Aug 3 14:50:24 J-L-Pasalichs-Computer kernel: AppleNMI unmask NMI
Aug 3 14:50:24 J-L-Pasalichs-Computer kernel: FWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
Aug 3 14:50:34 J-L-Pasalichs-Computer mDNSResponder[166]: mDNSResponder Waking at 127000878
Aug 3 15:03:02 J-L-Pasalichs-Computer kernel: 0 0 AppleUSBCDCECMData: probe - provider doesn't want us to match
Aug 3 15:03:03 J-L-Pasalichs-Computer kernel: 0 0 AppleUSBCDCWMCData: probe - provider doesn't want us to match
Aug 3 15:03:03 J-L-Pasalichs-Computer kernel: 0 0 AppleUSBCDCACMData: probe - provider doesn't want us to match
Aug 3 15:03:03 J-L-Pasalichs-Computer kernel: InternalUSBModem::setPowerState(1)
2007-08-03 15:20:54.128 Safari[1167] Unable to load nib file: MainMenu, exiting
2007-08-03 15:20:58.825 Safari[1168] Unable to load nib file: MainMenu, exiting
2007-08-03 15:21:02.049 Safari[1169] Unable to load nib file: MainMenu, exiting
2007-08-03 15:55:30.713 Safari[1176] Unable to load nib file: MainMenu, exiting
Help! Help!Hi back to you.
Per your instructions, I downloaded the 10.3.9 combined update. (Thanks.) When I tried the dmg package this warning appeared: "The following disk images failed to mount: MacOSXUpdateCo no mountable file systems". Then I tried using Disk Copy to open the package and got: A red stop sign and "MacOSXUpdateCombo10.3.9.dmg failed to mount due to error 95. (missing plugin)". At this point, I have absolutely no idea what to do. Please advise. Many, many thanks. -
Installed InDesign on computer but it won't open - just keeps trying to install
I have gone over this process all day now, the program says that it is downloaded... it appears on my desktop. When I open the icon, it goes to another installation progress page which takes 15 or so minutes to go thru and then just closes. I have seriously tried everything... any ideas?
Mary,
Did you decompress the downloaded files? You may be seeing the decompression rather than the actual installation.
I haven't downloaded the package, but typically you will get a Windows executable file which is a compressed archive of the actual installer package. Double-clicking the icon starts the decompression routine which puts the package in a folder somewhere on your system (you may or may not be asked where to put it). You then need to find the installer in the decompressed package.
Peter
P.S., are you the Mary I know from Cape Cod? -
Encore was launching and working fine but,as many others before me, I had no content in the Library panel and downloaded the content files from the link Adobe provides. When I relaunched Encore it froze at the bottom of my screen. I have restarted the application, the computer, and even deleted the preferences file but Encore still freezes. I am using a Mac, OSX ver. 10.6.8., 6 gigs of ram. Any help would be appreciated.
Are you sure you meant to write CS5?
My understanding is that CS5 had a "self contained" installer that installed everything, and it was CS6 that required extra downloads from Adobe -
Hi I have downloaded compressor4 from Apps store but it won't open - says compressor not properly installed. The reason for my purchase was that compressor 3 stopped working. I tried to reinstall from the FCP disk but it was 'greyed out'. I followed suggestions from the apple site to clear various library files - mainly relating to Qmaster but this didn't make any difference, an iwonder igf perhaps this is the reason for the compressor 4 programme not working. Thanks
TomYou need to export a self-contained video from FCP 6. Import the self-contain video into Compressor 4.
•iMac 27", 3.4GHz Quad-Core Intel Core i7, 16GB 1333MHz DDR3, 2TB HD + 256GB SSD, AMD Radeon HD 6970M 2GB GDDR5•FCS 3•Compressor 4•OS X 10.7 (Lion)•iPad 1&2•Apple Tv 2• -
Motion 3 Won't Open After Installing
Hi,
I reinstalled Motion 3 after doing it 2 days ago because the beach ball keeps coming up and never leaves causing me to force quit. I let it stay up one night and when i awoke 8 hours later it was still up. thus, i reinstalled after trashing it. there's never any motion files in the library to delete and no motion files in the receipts. this time it won't open after installing it and booting down computer. I have lion 10.7.5 the fcp studio disk that i install for motion says version 3 but could have sworn on the computer when it was working it said motion 4. Any suggestions? did all my software updates too.
Thanks,
joeMotion 3 is part of Final Cut Studio 2. There are many threads on these boards about trying to get those apps to install properly on OS versions above 10.6.8. Here's one such thread. A search will bring up additional ones.
Russ -
ITunes won't open after installing update.
After installing the latest itunes update, itunes won't open at all. I click on it and it just won't open. I tried uninstalling and reinstalling and it still doesn't work.
hello Nevada!
After installing the latest itunes update, itunes
won't open at all. I click on it and it just won't
open.
are you getting an error message? if so, what does it
say?
or are you getting no error messages whatsoever? if
so, could you let us know the results of the
following observations?
reboot your PC. open Task Manager to the Processes
Tab. now try to launch itunes again.
does an itunes.exe process appear in Task Manager? if
so, does it persist in there, or does it disappear
after a few seconds?
love, b
b noir - i have been following your advice and i want to thank you for taking your time to try and solve these problems for ipod users.
i have been following this message board each day for the past week - ever since my iTunes stopped working. i have not yet seen anyone who is receiving the same error message as myself.
like most others, i downloaded the recent update for iTunes - since then, iTunes will not open. i have tried most of the other proposed solutions to no avail, such as downloading a stand-alone version of quicktime, making sure my msconfig start-up has the correct check marks, etc.
the iTunes set-up completes with no problem - i have tried installing by saving the file to my hard drive and then running and also by running the program straight from the download window. same results.
once i go to open iTunes, i receive the following error message: "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. if you were in the middle of something, the information you were working on might be lost. Please tell Microsoft about this problem." Then I click "Send Error Report" just hoping I will receive a required update to make this work.
i was wondering if you could attempt to help me resolve this issue? i have my music saved to my external hard drive, so i am in no danger of losing my music. however, i need to open iTunes to update my iPod.
thanks in advance for your help.
rence -
Iphoto 8.1.2 won't open after upgrade to 10.8.2?
iphoto 8.1.2 won't open after upgrade to 10.8.2. I have tried to upgrade iphoto to 9.1 but it won't work.
To upgrade to iPhoto '11 (version 9.x.x) you musdt purchase the upgrade in the App store - that is not a free update.
what happens? What error messages do you get? if it crashes post the first 50 lines of the crash report
LN -
My Itunes won't open after a failed attempt at upgrading.
My ITunes won't open after a failed attempt at upgrading. Keep getting the error message...Failed to start because MSVCR80.dll was not found. I have tried uninstalling and reinstalling and notheing works. Help!
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Aperture library won't open after using new iphoto
My Aperture library won't open after accidently using iphoto to view it. It says Aperture is outdated but I run 3.4.5 version which is the last.
Now I CAN'T DO MY WORK thanks to this lunacy.
Anyone any suggestions how to fix this ****?Also one more thing
On the MacBook Air - Where aperture is working fine and loading the library, i tried to change the name of the library and then when I tried to open it it shouted with the error ""Error Opening Library--The library could not be imported because it is from an out of date version of Aperture 3. Please upgrade the library to the latest version of Aperture 3 and try again""
But when I changed the name back it was working fine again on the MacBook AIr
Should i be worried that when i look at the get info on my library it says it's an aperture library 3.5.1 ?
Pandava
Maybe you are looking for
-
Dear All, I have created a returns PO with ED (821) now in J1IS while capturing the excise I've maintianed different value from the purchase order since the vendor has come up with different value so I changed it in j1is and migo now while doing MIRO
-
I now have an iPad and want to know do I still need to have iTunes on my pc?
-
[ora_hash] different value for the same input
hi all, i'm using 2 different machine running the same version of oracle (11g). on those 2 db i have the same tables with the same datas. for the comparisson of the data i'm using the ora_hash function (both on numeric and string fields) and for some
-
Can iPhone be tracked by the serial number instead of apple id?
can iPhone be tracked by the serial number instead of apple id?
-
Hi. I am running VSS on 4506-E switch with Supervisor 7L-E. Currently running IOS on both switches is "cat4500e-universalk9.SPA.03.05.03.E.152-1.E3.bin" which is latest one. I have been asked to run "cat4500e-universalk9.SPA.03.04.03.SG.151-2.SG3.b