FCP X 10.1 is always engraving the same project even if it has been modified and rended : is anyone capable to explain if my process is wrong ?
FCP X is alaways engraving the same version of my project even if modified and eventually renamed : it seems like FCPX reuse the same disc image. Is anyone having experienced the same issue ? Thanks for your help
Michel Bussac
As in the other trhead, what are the specs of the media, what are the project properties, and exactly what effects are you having the problem with?
And as Russ says, post screen shots.
Similar Messages
-
When I run a system utilities check and select HD. i always get a prompt the the SUID System/Library/CoreS has been modified and will not be repaired. How can I access this file so that I may repair it? Left unrepaired . There are a lot of files that do not have the correct code. They are one thing but should be another
Hello there, toestothenose.
It seems that you may not have gotten the entire message into your thread here, but the following Knowledge Base article offers a good resource on which messages from Disk Utility's Repair Disk Permissions can be safely ignored:
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
http://support.apple.com/kb/ts1448
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My company email is starting to save numerous drafts of the same email even after it has been sent
Earlier today my company email (set-up in Mail) started saving numerous drafts of emails even after they have been sent out? Any idea why this is-I have talked to the service provider and they have led me to believe it is an Apple issue
There is no anti-malware for iOS, at least none that actually does anything useful. The odds of getting any malware infection via an email attachment on an iOS device is quite low - practically non-existent. Unless you are seeing any issues, there isn't much to do, other than deleting the email and being more cautious in the future.
-
While verifying and repairing permissions using the disk utiliaty program, I get the message: Warning the SUID file "system/library/core has been modified and will not be repaired. What is this and do I need to take some corrective actions? Thanks. WDG
Ignore it, your fine.
http://support.apple.com/kb/TS1448?locale=da_DK
If your tuning up your Mac, you need to read all the tricks.
Step by Step to fix your Mac -
I have been transfering photos and movies to an external hard drive and when I try and secure trash contents off my computor i get the message it will not continue In utilities the message is: SUID file syst/library/coreS has been modified and will not be repaired. Hence I cannot free up space on my computor. What can i do?
Do not worry. It is probably a permission you should ignore, but you should check that the permission appears in this site > http://support.apple.com/kb/TS1448?viewlocale=en_US&locale=en_US
-
Can a subVI tell when the application it is part of has been stopped and restarted?
Can a subVI tell when the application it is part of has been stopped and restarted?
It is easy enough for a subVI to tell when it has been run for the first time after having been loaded into memory. But is there a way for a subVI to tell when the application it is part of has been stopped and restarted? Is there some property or application-invocation-specific refnum that when queried multiple times during the same run of the application would return the same value yet when queried during different runs of the application would return different values?
I don�t want to depend on anything that happens when a run is exited.
I don�t want to require code to be included in the main V
I to accomplish the solution.
(Otherwise I could, in the main VI create an un-named semaphore tied to a global; the subVI could then check the global to see if the value changed, which it would between runs of the application.)
Any ideas?Have you tried the First Call? function? It's on the Advanced>Synchronization palette.
-
Hi There! I have a question on Kernel Task-Threat. How can I clean my computer? This is the message that persists when cleaning disc--Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
That's a routine message and it means nothing. Don't waste your time repairing permissions unless you know you have a problem that can be solved that way, which you probably never will.
-
I got this message. What does it mean?
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.That the current software is installed. Ignore it.
(71759) -
Get the rows in the same order in which it has been inserted.
Hi,
I have a table with four columns(All varchars)...and there are no primary keys
i have inserted 15 rows where col1="xyz"
Now while retrieving the same...i dont get the same in the order i ahve inserted..
What is the way to get the rows in the same order in which it has been inserted..?
RegardsI have a table with four columns(All varchars)...and
there are no primary keys
i have inserted 15 rows where col1="xyz"
Now while retrieving the same...i dont get the same
in the order i ahve inserted..
What is the way to get the rows in the same order in
which it has been inserted..?
RegardsWhy? What is your business case behind this?
In my experience an "order by" is used way too much without any real need to do it. Are your users interested to know in what order a few records from two years ago have been inserted? What about updates since that time? -
screen saver does not turn on. Have run the disc utility to repair disc permissions. Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
I am running 10.9.1 software
Help Diggs1936I would try reinstalling.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Besides the obvious, does anyone have any info. as to what this means:"Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
what do you mean by the obvious?, it's a permission issue, ARD must run as systems administrator to boardcast, tunnel IPv6 calls, etc.
-
What does the message "Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired" when repairing disk permissions?
It's just a status message, albeit a misleading one, and can be ignored.
http://support.apple.com/kb/TS1448
Regards. -
after running permission repair i get the following msg. anyone know how to fix this?
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
Poster rccharles has provided this description of what it all means:
drwxrwxrwx
d = directory
r = read
w = write
x = executeable program
drwxrwxrwx
| | |
| | all other users not in first two types
| |
| group
|
owner
a little more info
Before the user had read & write. A member of the group had read.
After, only the user had read & write. -
Revision: 15527
Revision: 15527
Author: [email protected]
Date: 2010-04-16 17:21:06 -0700 (Fri, 16 Apr 2010)
Log Message:
Fix bug FM-696: Capability change events being dispatched after the trait to which they refer has been modified. Updated unit tests.
Ticket Links:
http://bugs.adobe.com/jira/browse/FM-696
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/media/MediaPlayer.as
osmf/trunk/framework/OSMFTest/org/osmf/media/TestMediaPlayer.asMajor Update: The G-Keys can now be edited without recompiling by editing shell scripts at "/usr/share/g15daemon/macros/"
Each button has it's own script file named by it's label (e.g. to edit the functionality of G1, open the script named G1.) The button will try to execute the scripts as programs, so make sure they are executable (chmod +x) and as long as the name remains the same, if you want to replace the files with something different, know that the arguments currently given to the files ($1 and $2) are ($1)on/off and ($2)0-2 (where 0 is M1 and 2 is M3)
To download the updated sources, go here (only the g15daemon source/patch was updated). This thread's OP has been updated.
Last edited by rabcor (2015-02-12 04:46:48) -
When I try to open iPhoto it begins the process and then stops. It brings up a message that iPhoto has quit unexpectedly. Efforts to reopen it bring the same result. My timemachine has been accidentally turned off. I have over 20,000 photos on iPhoto. Help!
First, copy your iPhoto Library to an external so that you have a backup.
Second, see if you can create a new Library and have it open. To do this, open iPhoto while holding down the Option key. It will ask which Library to use, or allow you to create a new Library. Save the new library with a different name from the old one.
If that does open with a new library, the old library is corrupt, but all the files are still OK.
If it is a corrupt Library, iPhoto Library Manager can repair some corruption, or transfer the Library over to a new one.
Maybe you are looking for
-
Basically as the title states, I cannot publish a set of photos that originated as video frame captures, whether to my hard drive or using a service plugin for Flickr. I have tried multiple publish service plugins for Flickr and everything fails prec
-
Hi, we have upgraded our 4.7 system to extension set 2.0 patch level 09. I have made the required configuration for Thumbnails in the "Applications-> parameters- > check in original for thumbnail" and also defined the GIF workstation application, but
-
Can't switch back to 64bit mode in CS5!
I switched to 43 bit mode in CS5 clicking the checkbox in the info. section. I want to switch back but the check box is no longer visible! Where did it go and how can I switch back?
-
I am subscribed to a school calender for events for my child. The school say that they have grouped events, so that we can remove those we don't wish to see. I want to see only those relevant to my child. How do I remove the other groupings as I don
-
i am posting images to the "photo" template on iWeb. after publishing the site several times with problems (images didnt appear) i have now recieved an ALERT! page telling me this page is unknown does anyone know what this means? i have tried directi