FCP X 10.1 release and price

Has anyone any idea of when and at what price will be the next version .
I want to buy FCP X but if I buy it now, will I be obliged to a paying upgrade in one month ( or less as I hope ) ?
What do you think about it ?

Speculation about future software releases is against the terms of use of the forum.

Similar Messages

Retriggering Release strategy for PR with Document Type, Company Code and Price Range as Characaterstics

Hi Friends,
I have a issue to fix. The issue is releated to PR.
There are some PR's in the system which has wrong release strategy picked up or wrong approvers picked up due to some congif change. now that the config changes are rectified correctly, we need to find a solution to correct the PR's which got affected due this.
I have to retrigger the release strategy for all the affected PR's.
The characterstics which we have consider for release strategy is Document Type, Company Code and Price Range.
Can anyone suggest how can we retrigger the PR in bulk or individual to all the affected PR's, so that it picks up correct release strategy as per new config changes.
Regards,
Manjunath K

Hi,
Refer the discussion to triggers release again on release code addition/change in release strategy.
release code is changed on PR release strategy - old PR can´t be approved
Regards,
Biju K

Nokia N71 Release Date and Price???

Hey guys sorry to bother you but do you no when the Nokia N71 its going to be released and at what price SIM Free?? also there are loads of people claiming to be selling them on ebay they are all fake so if you see one dont but it from there
thanks

hi nokia n71 is nt goin to come cheap sim free
released in the shops in a couple of months

Avoid check for article number and price from ORDRSP inbound

Hi,
i m working on an integration (with PI) of a 3rd party vendor with a SAP ERP (7.1) backend system. The vendor sends a soap message which is transformed by PI to an IDoc ORDRSP.ORDERS05.
The vendor sends a purchase order confirmation but unfortunately without information regarding article number and price. Therefore the IDoc remains in status 51 with 2 errros:
- Price outside tolerance range (order price 531,60 , new price 0,00 )
- Article number differs from that of ordered article 000000000000152672
Is is possible to avoid the check so that the purchase order's article number and price are not updated by the IDoc?
Regards,
Udo

Hi Udo,
This error seems to be explicitly populated into Status records of IDOC processing from the include LEINMF2O, form "CHECK_MATERIAL_PO_IDOC" (For Material) & Include LEINMF2D, form "PRICE_CHANGE".
One way to suppress the error message is to populate the existing values in EKPO table to IDOC segment using enhancment component EXIT_SAPLEINM_007, which is called from include LEINMF2X, line number 113.
Documentation of enhancement component reads
Functionality
Reading of further IDoc segments at the time of acknowledgment receipt.
The current segment is passed on in the parameter segment.
Data can be stored in the structure CUSTOMER_EKPO.
As of Release 4.6A, modification of the program-internal table FEKPO is possible.
This is just a suggestion and don't know how far it will be helpful to your requirement.
Regards
Vinod

Quantity and Price block on MM docs not appearingin MRBR list

Hi Gurus
Even if there are quantity and prices blocks in the MM doument , the MRBR list doesnot display the blocked documents.
As a result we are not able to release the documents and remove the block.
What could be the possible reason for this?
And is there any other way to remove the block on MM document without going through MRBR.?
Early Response is highly Appreciated
Thanks a Lot
Rgds

hi,
If you do not want to check the Invoice for tolerance keys like quantity variance and price varaince then tick on don't check .In this case system will not block any invoice and invoice will post Automatically without any error.
Please check other tolerance keys in SPRO: OMR6
One more blocking is defined in the vendor master also under payment transactions accounting screen.There you are defining the tolerance group for Invoice Verification.
Regards,
Amit

Any idea when FCP 7 will be released or what apple is working on?

any idea when FCP 7 will be released? does anyone have a link to any info regarding FCP 7?

Apple is extraordinarily tight lipped about product developement. If anyone knows, they can't say. If they can say, they don't know.
Speculation about future versions is not really part of the forum protocol -Terms of Use and all that.
If you need the software now, buy it. If you have a feature you'd like to see included, use the Software feedback form found under the FCP item on the program's Menu Bar.
x

Help meuFF01uFF01uFF01I can't release future price by CKME

Dear Everybody
     I use material ledger(S+3), I have marked future price,but can't release future price to current standard price,I had try many methods,but failure,so help me.   My SAP is R/3 4.6
   Period 012/2008
     standard price 5800
     Per. Unit price 5900
    Future price 5900
    Future pirce from 12/01/2008
MM Open period is 12/20008,and current period(12/2008) has goods movement.So I how to release Future price (5900) to standard price, or tell me standard flow

No error message, just standard price don't have changed. I have found many information---it is easy to use CKME releasing future price to standard price. But I had try many times, is failure, Why?
Anyone can tell me the prerequisite or attention before using CKME? Thank you very much.
I regret the user of ML,Now It's Month End,I am going mad.

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

How to forbid any further changes for PO (QTY and price )?

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Better to post this in logistic forum.
THere will be some config option to do so but normal FI perosn would need to dig deep, a MM perosn should answer quickly.
Reg
Hein

Quantity and Price Totals on Sale Order and Delivery Order

Dear ABAP Gurus,
I want to add totals of line items (Quantity and Price) in sale order and delivery order screens. Can you please guide me how to do this. The price can be any from pricing procedure ie exclusive or inclusive price of sales tax.
regards,
RSA
Moderator message : Requirements dumping not allowed, show the work you have already done, thread locked.
Edited by: Vinod Kumar on Jan 28, 2012 9:23 PM

Hi,
Try this :
IF @transaction_type in ('A','U') AND (@OBJECT_TYPE='22')
BEGIN
If exists (SELECT t3.docentry FROM OWOR T0 INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry left join POR1 T2 on T2.[U_JONum] = T0.[OriginNum] and T0.[ItemCode] = t2.U_SubConItem] INNER JOIN OPOR T3 ON T2.DocEntry = T3.DocEntry WHERE T1.[PlannedQty] <> T2.[Quantity] and T1.[ItemCode] = 'subcon' and T3.DocEntry = @list_of_cols_val_tab_del )
Begin
SET @error = 10
SET @error_message = 'Not allowed to add more than planned'
End
End
Thanks & Regards,
Nagarajan

T code for Material,plant, stock and price data in std sap

Dear All,
In Std SAP is der any t-code to get Material,plant, stock and price data in 1 go..
waiting for ur early reply
Regards
Nainesh

Hi,
Try T.Code: MC.9 and MC.5 etc. These reports will give you total value of the stock but not unit price.
If you are looking at unit price please write a small query using SQVI or append the relevant info structure.
Regards
Srinivas.P

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

Autorization of Sales District and Price List Creation to the User

Dear Experts,
At Present the end user (customer) is sending the request of New Sales District and Price List Creation to SAP SD Consultant and the consultant creates the same in Development Client SPRO through T code OVR0 etc. and then transports the same to Quality and Production Server. This Process takes a lot of time
We want to provide the direct access of Sales district and Price List creation to the user in PRD.
Kindly Let me know what is the best way in which we can handle this situation.
Regards,
Ranjan Singh

Are you sure you want to do that? You will create inconsistencies between the systems which will jepardise future tests. I suggest you just train end-user to do the procedure him/her self. I don't think it costs so much time to transport a couple of requests.

Today update osx 10.6.8 to apple new 1.5gb release and macbookpro don't reboot

hi there averyone.
I updated today (9.30 gmt+1) my macbookpro os 10.6.8 to apple latest release and after 1 required reboot my apple macbookpro is deeply thinking on a gray apple with a loader under it...
Apple can provide a fast solution?
Are apple update tested anyhow?
Is there a secret way to have a working machine?
do i need to think my winzoz laptop will always save me from having a mac and giving me the chance to work?
cheers,
a sad apple use...
JT
my fisrt apple, coloru classic 4 mb4am, os7.0.1 was much better...

jt99x wrote:
6h.30 mins wasted on a supposed professional platform.
a 1.5gb update cannot be considerd a minor updates. a prerequired check of all necessary hw would be considered a starting point not a surprise at the end of the process!
How do you suggest this hardware check should be done? "OS" stands for "operating system," the software that runs the computer. The computer of necessity relies on the OS to do its checks. If the OS on the Mac is damaged or the drive needs to be reformatted to correct errors on it, how do you expect it to be able to use its damaged software to check for any damage to its own hardware?
Macs have a very limited hardware test built into their firmware called POST, for Power On Self Test. As the name suggests, this runs every time you power them up. But it can only check for gross errors, & can't check the OS software at all (because that software has to load & run the tests).
Apple provides a more extensive way to check for hardware problems known as the Apple Hardware Test, but for reasons that should be obvious from the above, it has to be initiated by the user. Likewise, Apple provides a way to test the hard drive for errors (Disk Utility), & for the same reasons it must be run from another start up volume (like the system DVD) to repair the drive normally supplying the OS.
Apple also provides Safe Mode, which loads only the essential parts of the OS from the start up drive. But it isn't magic -- if any of the essential parts of the OS have been damaged by file system corruption, it too will fail to start up the Mac.
The bottom line is Apple can't possibly provide any comprehensive way for your Mac to predict how a perfectly good update would react to existing hardware or software damage on it. That is something you must learn to do, especially if you rely on it for any professional purpose.

Hello, starting with today I have a strange problem: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Hello, starting with today I have a strange problem with Final Cut Pro X: all events are correctly shown in the finder but in FCP-X there`s`none and every time I open it creates a new event. What is wrong?

Here`s the screenshot.
But anyway:
The drive is Makintosh HD from my Macbook and it is shown in the event mediathek and in the projects. Since I`ve recognized this problem I installed FCPX again and consequently the event and project directory created by FCPX is where it should be and it shows all the test events including it`s files.
So what happens? Opening FCPX you see only one event and that a new empty event. All previous events are not shown there even if you can see them in the finder. So if you import again the clips they are in this new event library. After closing correctly FCPX and reopening there again is nothing than an new and empty event. What it does is that it recognized that i.e. there are events with previous numbers and so it creates an new one with the next available counting number.
If you want to open one event from the finder it by clicking to the file it opens FCPX but it says it cannot open the clicked file.

FCP X 10.1 release and price

Similar Messages

Maybe you are looking for