FCP X Export Problem

When I export my timeline by using Share / Export Using Compressor Settings and then use Apple Pro Res 4444 to generate a Quick Tiime movie, I get a thin vertical line on the right side of my image. See attached. I would prefer not to reimport the movie and crop to remove the white line. Am I missing a setting? When I run the timeline in Viewer, there is no problem. In this view the white line is barely visible but when the image is full screen in Quick Time 7, it is very noticeable.

Here is a smaller screen save file. Hope you can see the white line.
The original media was created in an animation program called Tune Boom Animate. The saved file was a 800 x 600 NTSC file at 30 frames / second. It was exported as a Quick Time movie using the Animation codec. The export out of FCP X was done via 4444 after multiple tests of different codecs. The color produced by 4444 was more accurate and the file lossless (at least I think so). The final video will be played on a large screen HD TV as the scrim / backdrop / commentary behind live puppets. The video will be played directly off a MacBook Pro. If there is a better method of producing the QuickTime file, I'd really like to know.
Thanks.

Similar Messages

FCP quicktime conversion export problem

issue exporting still image instead of video
FCP quicktime conversion export problem
within the last 2 weeks i have exported from FCP studio 7.0.3 as quicktime conversion, the settings are:
export as QuickTime Conversion:
> Options> quality> set to Best>
Standard Video Compression Settings
Compression Type: H.264
Motion:
Frame Rate: Current fps
Key Frames: Every 24 frames
check Frame Reordering
Compressor:
Quality: Best
Encodeing: Best (Multi-pass)
Data Rate:
Automatic
Filter… none
Size>
Dimensions:
NTSC 720x486 16:9
>ok
Sound: (don't change anything)
Format: Integer (Little Endian)
Sample rate: 48.000kHz
Sample size: 16-bit
Channels: (L R)
>Export
the results i get a odd. - the video exports fine, except for the beginning titles, instead a still frame image from somewhere else in the video occupies that intro, until the first transition- in this case- dip to white, then the rest of the video is fine. the portion of the beginning that does not show are composed of: livetype text credits in V2 - in which i have done a manual opacity fade up and down - so the livetype text fades in, over matte color solid in V1. in the exported video -i do not see any of this, all i see is a seemingly random still from somewhere else in the video. i can however hear the audio as it is supposed be.
cant figure out why this is happening. anybody know?
i think the livetype files are 1920 x 1080.
my FCP sequence is 720 p
this has only recently started happening and doesn't seem to be consistent.
im wondering if it has to do with the live type files, or the white solid?…
or the conversion settings above?

Alistair
Earlybird is exporting H264 ... the Key Frames setting is determining the GOP length. This value should really be determined based on the complexity of the video, to my understanding, the actual frame rate has no bearing on it. If you have very complex fast moving content then a low Key Frame rate is advisable to ensure good image quality (although it will adversely affect the filesize) whereas if you have slow moving or static content (like an interview subject) then a higher Key Frame rate will still produce a good image but at a smaler filesize. The default of 24 should be pretty much fine as a catchall starting point.
Earlybird
Corrupted render files (and render references) can be a pain because FCP will use those files and references in place of the original media when building the export. And so it should as it does't want to waste time re-rendering sections that are apparently already rendered. Unfortuantely, as noted, if the render file has gone bad and/or starts referencing the wrong media then you'll get these wierd flashes of completely unexpeced and unwanted footage showing up where it shouldn't be. When you trash those files then QT / FCP will just go back and re-reference the original media ... so it's usually a worthwhile step to take just in case thats the problem. The worse case scenario is that it only that doesn't work and you spend some time unecessarily re-rendering.
As to why these files go bad? That I don't know. Why do Preferences get corrupted? That I don't know either but it definitely happens :-(
Cheers
Andy

Jerky Export - FCP or Compressor Problem?

I have a 20-second sequence using the maximum zoom in. The background trees swaying in the breeze are "bumpy" or seem to be dropping frames once exported and burned to DVD. It seems the video in full zoom can't keep up with them. Yet the scene looks fine when played in Final Cut Pro, which does not display any dropped frames or struggling to produce smooth video in this sequence. But once exported to Compression it gets rough in spots and gives the jumpy illusion of dropping frames.
Not sure if it's a FCP or Compressor problem. Any suggestions?

Translation problem on your end or ours?
Burn to DVD? You mean you encoded to MPEF2 for playback on a set top DVD or you burned your QT to a DVD? H-U-G-E difference.
MPEG2 hates that kind of detail and fine motion. Of course it's going to skip and jump unless you very carefully tweak the encoding settings. Very carefully. There are entire books written on how to do that, how to get the best possible compression. The defaults in Compressor just don't do it for you, they are strictly generic but totally applicable to 90% of what you throw at it.
bogiesan

Please help. Color Crashes on "Send to FCP" or export XML

This error has just started happening and it's driving me nuts.
I'm using FCS3 and I've got all the latest updates.
I'm grading 60 sec commercials (source is XDCAM EX HD 1080p and I'm rendering in Pro Res HQ 1080)
I did 3 this morning with no probs.
Now on my 4th; Color "quits unexpectedly" every time i try to export XML or send to FCP.
I haven't done anything differently.
After trying and crashing 3 times, I restarted the computer and tried again.
No change.
I thought that maybe the file is corrupt so I started a new project and did the grade again.
Still no joy.
Anybody got any ideas what's wrong?
Thanks
Hills

I also am having this problem. I am running a Macbook Pro with 2 gigs of ram, OS 10.6.2, FCP 7.01 and Color 1.5. I am working on a film which is is in small 4-5 minute segments with nothing fancy, DVCPRO HD-1080i60. There are some B/W tiff files at the start of each segment. They are all rendered fine. Color crashes the second I try to send back to FCP or export XML. The error code message is:
Build Info: Color-5780000~8
Code Type: X86 (Native)
Parent Process: launchd [150]
Date/Time: 2009-11-23 18:24:19.698 -0800
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report: 8840 sec
Crashes Since Last Report: 2
Per-App Interval Since Last Report: 84 sec
Per-App Crashes Since Last Report: 2
Anonymous UUID: C8316C14-1827-4836-98E1-887D049B4C75
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000012
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 com.apple.color 0x002b2a60 RemoveCacheSequenceNodes(scxml_node*, std::map<std::string, scxml_node*, std::less<std::string>, std::allocator<std::pair<std::string const, scxml_node*> > >&) + 592
1 com.apple.color 0x002b2a6b RemoveCacheSequenceNodes(scxml_node*, std::map<std::string, scxml_node*, std::less<std::string>, std::allocator<std::pair<std::string const, scxml_node*> > >&) + 603
2 com.apple.color 0x002b2a6b RemoveCacheSequenceNodes(scxml_node*, std::map<std::string, scxml_node*, std::less<std::string>, std::allocator<std::pair<std::string const, scxml_node*> > >&) + 603
3 com.apple.color 0x002b2a6b RemoveCacheSequenceNodes(scxml_node*, std::map<std::string, scxml_node*, std::less<std::string>, std::allocator<std::pair<std::string const, scxml_node*> > >&) + 603
4 com.apple.color 0x002b2a6b RemoveCacheSequenceNodes(scxml_node*, std::map<std::string, scxml_node*, std::less<std::string>, std::allocator<std::pair<std::string const, scxml_node*> > >&) + 603
5 com.apple.color 0x002b2a6b RemoveCacheSequenceNodes(scxml_node*, std::map<std::string, scxml_node*, std::less<std::string>, std::allocator<std::pair<std::string const, scxml_node*> > >&) + 603
6 com.apple.color 0x002bfff7 ft_fcphandler::getExportWithFcpXml() + 567
7 com.apple.color 0x001334a0 ft_project::sendToFCP() + 288
8 com.apple.color 0x0000ad06 ftapplication_noReallysendToFCP() + 70
9 com.apple.color 0x002455cb sui_multitask::callMultitaskingCallbacks() + 283
10 com.apple.color 0x00245e20 sui_multitask::taskEvents() + 32
11 com.apple.color 0x001d9421 libmac_mouseEvent(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 3025
12 com.apple.HIToolbox 0x98a24e29 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1567
13 com.apple.HIToolbox 0x98a240f0 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 411
14 com.apple.HIToolbox 0x98a46981 SendEventToEventTarget + 52
15 com.apple.HIToolbox 0x98a58457 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 1257
16 com.apple.HIToolbox 0x98a2527a DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2672
17 com.apple.HIToolbox 0x98a240f0 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 411
18 com.apple.HIToolbox 0x98a46981 SendEventToEventTarget + 52
19 com.apple.HIToolbox 0x98bcf81b ToolboxEventDispatcher + 86
20 com.apple.HIToolbox 0x98bcf953 RunApplicationEventLoop + 243
21 com.apple.color 0x00009a65 main + 3093
22 com.apple.color 0x00002986 start + 54

Export problems- it's renaming my MOVs to strange things and they're huge!

Hey guys,
strange fcp export problem. I have a 10 minute anim compressed fcp project, 1920x1080, 30fps on a top-of-the-range macbook pro with external terabyte HD. I did a test export a couple of days ago, because our deadline is really soon, and that all worked fine - a 10 minute quicktime, 100% anim codec, was 26GB. That was fine. I did another test clip, just a spinning bitmap for 10 mins, from AfterEffects with similar, succesful, results and file sizes.
Now, however, when I export, it comes out as 60GB, and FCP changes the filename to something which is the first half of the filename I chose, and a strange number for the second half which is different each time I try it. Something like "filena#CF342.mov", for example. This file seems to have video in it OK, but it's 3 times the size, and the data rate is much higher, too high to play back.
The only changes I've made since my successful test are replacing many of the low res previews with hi res versions, and adding 1 minute to the end. And I changed my QMaster setup, not sure if that's anything to do with it.
Anyone got any ideas? I'm getting pretty worried.....
thanks in advance....

Thanks for the quick reply! No, don't think that's the problem. The new render doesn't have an alpha channel - it's Animation 100% Millions (not Millions+), and I don't think that would add more than 25% to the file size anyway. It also wouldn't account for the strange renaming of filenames. And the increase in length is only 10%. The file size has tripled!
The final delivery format was going to be animation, 1920x280, because it's going to projected on a 30m wide cinema screen and live TV tomorrow night but our playback solution (while it handles the test files ok) can't handle the data rate of these strange new files: it's 800mb/s, which is pretty ridiculous.
The renaming of the files suggests (to me at least) some kind of bug/error, but it doesn't report any kinda error in either fcp or quicktime.
Plan B is to recompress the strange big file using h264 which gives an ok quality and is 10% of the size. Reason I'd like to do it animation is I need to do several versions with different gamma, so I need to do further processing on the rendered file after it's dumped from FCP.
Any thoughts? I'd like to get to the bottom of this.
one thought - I didn't tick "recompress all files" and some of the source DOES have alpha - would it be taking the alpha channel even though I didn't ask for it?

FCP cant export any video

Hi,
I have been dealing with editing a feature film for some months now. I've been able to easily export the sequence until now. I have tried a few things. I exported a self-contained quicktime movie, I used compressor in FCP to export it that way and none work. I even erased my hard drive, and installed all the software again. With no luck. I use to have an aja kona LSe card connected to an external monitor, but that stopped working about a week ago. When the problems started happening. I am trying to play with that and see if I can get it to work again, but no luck. When the project is open now FCP in general has become very slow. My settings now for FCP are the standard DV-NTSC anamorphic set-up. Any help would be much appreciated thanks.

You likely have some media that's corrupt and that is what is stopping the export. The LHe card is another thing altogether.... you might call AJA about that. Try moving your media to another folder on the same hard drive, then open the project and reconnect the media files a few at a time until you see a crash or warning, or something that lets you know that the media needs recapturing. If this fails to fix you up, I'd suggest a clean erase and install of OS X, then FCS on top of that on a fresh startup disk. If you've not done this in a while, it's likely time anyway to do it.
Jerry

Hi Expert , crystal report export problem. system not responding

Hi,
crystal report export problem. system not responding.
Thanks
Rajkumar Gupta

Dear Raj,
Please try this
          Try
            Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
            Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
            Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
            Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            rptDoc.Load(rptPath)
            rptView.ShowExportButton = True
            rptView.ReportSource = rptDoc
            For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
            Next
            For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                    If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                        oSubReport = rptObject
                        rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                        For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                            oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                        Next
                    End If
                Next
            Next
            'Setting Paper
            Dim rawKind As Integer = 0
            Dim printSet As New System.Drawing.Printing.PrinterSettings
            For i As Integer = 0 To printSet.PaperSizes.Count - 1
                If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
                    rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
                    Exit For
                End If
            Next
            Dim MyTest As New SaveFileDialog
            rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
            rptDoc.ExportToStream(ExportFormatType.Excel)
            'rptDoc.SaveAs("C:\TBKING.xls", True)
            '''How to export the report
            Try
                Dim CrExportOptions As ExportOptions
                Dim CrDiskFileDestinationOptions As New _
                DiskFileDestinationOptions()
                Dim rename As String
                rename = rptName.Replace(".rpt", "")
                Dim CrFormatTypeOptions As New ExcelFormatOptions
                CrDiskFileDestinationOptions.DiskFileName = _
                                            "c:\Report\" & rename & "_Export_File.xls"
                CrExportOptions = rptDoc.ExportOptions
                With CrExportOptions
                    .ExportDestinationType = ExportDestinationType.DiskFile
                    .ExportFormatType = ExportFormatType.Excel
                    .DestinationOptions = CrDiskFileDestinationOptions
                    .FormatOptions = CrFormatTypeOptions
                End With
                rptDoc.Export()
            Catch ex As Exception
                MsgBox(ex.ToString)
            End Try
            '' end by kevin shah
            rptView.Show()
            rptView.ShowExportButton = True
            Dim oFrm As New System.Windows.Forms.Form
            rptView.DisplayGroupTree = True
            rptView.Dock = System.Windows.Forms.DockStyle.Fill
            rptView.Location = New System.Drawing.Point(0, 0)
            oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
            oFrm.Controls.Add(rptView)
            oFrm.Name = "Report Viewer"
            oFrm.Text = "Report Viewer11"
            oFrm.ResumeLayout(True)
            oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
            oFrm.TopMost = True
            oFrm.ShowDialog()
        Catch ex As Exception
            objMain.objApplication.MessageBox(ex.Message)
        End Try
By pressing this button XLS file be generated on C:\report\
Hope this will resolved the issue
Thanks
Kevin

CS4 Audio Export Problem

Hi
I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
Any help would be greatly appreciated.
Thanks and regards
Videoman 1
SA

Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
Thanks to you all.
Regards Paul ( Vryheid, South Africa )

FCP 5 export to .AVI for Windows client? Advice needed!

I have a Windows platform client that wants my Exported FCP 5 Sequence in .AVI format.
Obviously, I normally always use Export to Quicktime Movie in FCP, and I do know that their is not a direct choice in FCP to export/convert as an .AVI file. (I usually hand off the FCP file to another facility that does DVD Studio Pro authoring work, and haven't had a need to make different file formats).
This has made me to ponder of few bits of info, that I'm sure I could get great ansers to, here.
My normal "workaround" for making an .AVI for a Windows user is to Export as Quicktime Movie in FCP, like normal, and then open that exported file in Quicktime Pro, and use Export Movie to AVI in Quicktime Pro. Is this the best method? Secondly, I am a little unsure as to the best settings I should use in QT Pro to achieve this. For example:
I just did a routine NTSC 48k,16 bit stereo, 30 second ad in FCP, and my normal, Export to Quicktime Movie was about 260 meg in size for the finished, self-contained movie file.
I opened this in QT-Pro and ran Export to AVI. In the settings dialog, I chose "uncompressed" for video and 48k-16 bit stereo for audio. The resulting export was about 680 meg in size! Because of file size restrictions for the clients product, what settings change or choice should I be making in QT-Pro to get an "equivalent" of the 260 meg file the FCP is exporting? Should I not get an equal file size of the QT-Pro AVI versus the FCP export (both 260 meg?).
If the answer is compression, what is the best settings in QT-Pro? Cinepak? Intel Indeo?
Perhaps, I have always misunderstood what FCP Export to Movie is giving me, but I thought that was uncompressed video? If so, why do I get the 260 meg out of FCP, and then 680 meg from QT-Pro Export to AVI (uncompressed) for the same 30 second clip? Is it simply a data rate difference?
Lastly, I have actually had a Windows user take a FCP Export to Movie file, straight from me, and they say it opened fine in Windows Media Player as is for viewing. However, there is no (dot) file extension name on the end of the filename. They can simply click File/Open in Windows Media Player and choose the "unrecognized" file because of no extension, and play it just fine to at least view the clip.
So what exactly is the file type that FCP is creating? It's not a .MOV and not an AVI file. What would be the equivalent file type association (just for my curiosity).
Thanks for any help to the above as I value the more-experienced users here.
Wade

Hi Wade,
Sorry for letting your post unanswered for two days, we were all busy (I know, it is not an excuse).
Seriously, I think the reason you are not getting answers is you have asked too many questions in one post. Don't know about others, but I get slightly confused.
Let me tell you what I do with FCP material when I send it to our sound department where they work with Nuendo on PCs. I export sequence using QT Conversion. My settings are: Format - AVI, Compression type - DV-PAL, Compressor quality - Best. I do not bother much about the sound. I sent the resulting file over network to a Maxtor FireWire external drive connected to a colleague's PC and then take the drive down to the sound guys. If the AVI file is smaller than 2 GB I can burn it to a DVD and a PC can open it, if it is larger, PCs cannot open. Also, the sound guys ask me not to use Cinepac, they do not like it. Therefore, I use DV-PAL; I guess you may safely use DV-NTSC but it depends on who will open the AVI file. Ask your client what it wants.
I think my routine is a bit more streamlined than yours - I export straight from FCP and do not bother with QT. You are wrong in saying that there is no direct way in FCP to export AVI.
Hope this is a starter for more answers. Also, have you tried searching the forum? I am sure all the answers are already there.

Export Problem in LR 3.5

Hi folks,
I have been working with LR 2.7 for a while now and was happy with it.
PC - Win XP - LR3.5
Photo's stored on external hard disk (K:)
The RAW captures of a Nikon 3100 I recently won were not being recognized/imported by LR 2.7 and I installed the 3.5 version to see if it was any better. I would have to buy it anyway by the time I switch to Win7. In 3.5 the Raw files were imported, the settings of 2.7 were nicely taken over but now and I cannot export the files I have worked on to the K: drive of the external hard drive as I used to do with 2.7.
I get the message 'The folder could not be found' though it is set in the Export Window and I am looking at it in Win Explorer.
The original RAW captures are on the D: drive but that was always the case with 2.7 as well... I am doing it exactly as I used to with 2.7.
I tried with a photo from an older folder of my usual camera and everything works fine there.
The problem seems to be only with the Nikon files. Now I start wondering if there is something with raw format of this Nikon camera that is putting LR in a twist...
Anybody any ideas to help me out?
Thanks and grts
Nil

@ web-weaver:
Of course they go to a different folder and they also get different
titels/names once processed in LR. The originals are always RAW (NEF) and I
export them as jpg or tiff files depending on what more I will do to them.
@ ssprengel:
I get the message when I have renamed the file in the export window, set
the folder it has to go to and hit export.
In the 2.7 version I got it already when I tried to import.
As I said, this only happens with the Nikon (NEF) RAW files. With the
Olympus (ORF) RAW files I have no problem at all and had no problem in LR
2.7 either.
I cannot see anything wrong in the Export panel nor in Preferences.
Plug in is Metadata Wrangler and has been updated to the latest version >
no joy...
I tried import/export with jpg files and no problem there.
Yesss! Got it! What I had overlooked was a question mark next to the folder
in Library (sooo small). A rightclick and telling LR where it was solved
the problem. Strange, though, as it has never done this before... the main
folder and the path are still the same as the ones that work perfectly with
Olympus exports... just a different subfolder named Nikon and another named
Test... Also strange that if I started off with jpg, it was no problem
either...
Anyway, thanks a lot for shaking my senses for me
Nil
2011/12/10 web-weaver <[email protected]>
Re: Export Problem in LR 3.5 created by web-weaver<http://forums.adobe.com/people/web-weaver>in
Photoshop Lightroom - View the full discussion<http://forums.adobe.com/message/4075999#4075999>

Anyone get FCP to 'export using compressor' without it crashing?

As per the subject lads, for a long while now FCP 6 produces the spinning beachball and hangs indefinitely when I try to 'export using compressor'. I have to export using QT, then import the QT file into compressor where it works from time to time ( I think it's a really buggy app ).
Done all the usual things to try to fix it including full updates etc but it still crashes FCP. It would be handy to get it to work so if anyone has an answer I'd be grateful.
Peter

Yep trashed the lot, but I do use instances. I've come across some folks who allow compressor to employ all the available instances but expect FCP to function in the background and they experience hangs and crashes. I have allowed compressor to use half my instances and it fairly whizzes through the work when dealing with self-contained QT movies ( when it isn't playing up ) but I didn't think that using half my instances would still crash FCp when exporting directly off the timeline.
I'll disable instances and see if that cures it. If it does then it's actually worth abandoning 'export using compressor' off the timeline when I know Compressor works so quickly with self-contained QT movies and instances.

Can FCP X export .m4v directly?

Can FCP X export .m4v directly without usig Compressor?

Looks like .m4v to me.
iPad is the same. Do not use the Mac & PC compatible option. That makes .mp4 for PC compatibility.

Export Problem Solved (new problem)

I had posted earlier about export problem it was a silly mistake as i had kept hide extention on dats y it happened
Now problem is when i export the exported video has some pixcels and it hangs in between dunno wats wrong

What's a pixcel?
Pixel?
All video has pixels.
Seriously, your question is completely incomprehensible.

CS4 Export Problem

I have an external hard drive to which I export my encoded CS4 video files once I have finished editing. The problem is that, in doing so, space seems to be used also on my C drive. I need to find and delete these files on my C drive once my PP project files are rendered to my external drive. I have looked in temp files but they not there. Can anyone advise me on this?

That's done it S.V. Many thanks!
Lewis B.
Date: Mon, 13 Sep 2010 11:13:53 -0600
From: [email protected]
To: [email protected]
Subject: CS4 Export Problem
I'm a newbie so don't take my word as gospel buuuuttt....
If you're using Vista you might be making the same mistake as me. Go edit>preferences>media, hover the mouse over the media cache files location (i.e. C:\yadayada) and TYPE that into the bar at the top of the my computer. Don't click through and try and find it, TYPE it like you would an internet address in a web browser.
Silly Vista.
>

Excel export problem using craxddrt

Hi,
I'm using craxddrt v.11.5 in our intranet application to export rpt.reports to different formats. My code works well with PDF and text exports, but when it comes to Excel after the .Export(false) method executes the browser window just goes into idle then the session finally expires. I never catch any error. I have tried several export options with no prevail.
I suspect the Excel export is missing some info to complete and it is trying to prompt me, but no visible prompt gets displayed/answered so it just expires.
Could anyone help me out. I've spent several days researching and fixing the code and ran out of ideas.
Sincerely
Steve Komaromi

Hi Steve, Is there some reason you are posting this question over and over again?
Try looking at your same post: Excel export problem using craxddrt
Also, RDC is legacy product. Look for you answer where you posted the exact same question in the legacy forum.

FCP X Export Problem

Similar Messages

Maybe you are looking for