FCP X Import MXF files?

Is possible to import, in FCP X, MXF files?

MDSE
I have an XF100 which is almost the same as yours.
If youy download from the CF card via a card reader, you use the USB port.
If you download directly from the camera, you use a Firewire cable and connect to the FW800  port on your computer. The cable is not supplied with the camera. The output terminal is at the back of your camera, as you will see in your Instructions Manual.
jc

Similar Messages

  • I can't import MXF files shot on a Canon C300 into FCP 10.1.2.  I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.

    I can't import MXF files shot on a Canon C300 into FCP 10.1.2.  I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.  Any help is appreciated.

    Russ and Luis,
    I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in.   Still no luck.  I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support  This is where it is supposed to be as far as I can figure out. 
    Another piece of the puzzle is that  footage shot on a Canon C300 in 2013 and  I reimported today and it DOES import into FCP10.1.3.   Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX.  The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
    Any ideas?  (screen shots below)
    Thanks.
    Peace, Huey
    FYI Here is what Canon says
      "There is another trick that works sometimes though.  Try uninstalling the plugin and XF Utility.  Then, install the latest XF Utility, followed by the plugin, in that order."
    I did do this but no results.  Otherwise they say I need to wait for a new plugin.
    Here's 2014 Canon C300 files does NOT import to FCPX
    Here's 2013 Canon C300 files does import into FCPX.  I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that. 

  • Can't import mxf-files (Canon XF100) into FCP 10.0.8 after Mavericks

    Hello
    It's not possible for me, to import mxf-files into FCP.
    I haven't yoused FCP for a couple of days, but today I could not import files from my Canon XF100, so i think the problems came with Mavericks??
    Does any of you have same problems?
    What to do?
    Kind regards
    Thomas (Denmark)

    Hi Russ -
    I downloaded the utility and driver from here:
    http://www.learn.usa.canon.com/resources/blogs/2012/20120223_xf_utilities_and_pl ugin_updates.shtml
    But after looking around realized it isn't updated for Mavericks yet. I was only given two files and both weren't in any sort of directory structure- here is a screenshot.
    Thanks in advance for your help!
    -Robert

  • How to import MXF files to Final Cut Pro with smooth editing

    Summary: Follow this tutorial to learn how to import and edit MXF files in Final Cut Pro by converting MTS to FCP native format.
    If you have a Panasonic P2, Canon XF or Sony XDCAM series camcorder,
    you may be familiar with Material eXchange Format (MXF). Though MXF is a
    great video format to record high-definition videos, it is not easy to
    use in that they are not natively supported by most NLE systems like
    Final Cut Pro. In order to import MXF to FCP for editing, the easy workaround is to transcode MXF files to FCP compatible video formats.
    Along with some help from a top MXF Converter, it can be done. To
    help those who wanna edit MXF files in FCP without problems, here I
    share with you a simple guide on how to convert MXF files to edit in
    Final Cut Pro 6/7 or FCP X.
    First of all, downloading the App- Brorsoft MXF Converter for Mac
    Overall, the program is a professional yet easy-to-use MXF Converter
    on Mac (Mavericks included) which can not only convert XF100, Canon
    C300, XF105 and XF305, Panasonic P2 recorded MXF files, but also provide
    simple video editing functions for you. The MXF to FCP Converter not
    only can convert MXF to ProRes for FCP, but also can transcode MXF
    videos for editing in Avid MC, Adobe Premiere Pro, iMovie, FCE, etc.
    Just download it and follow the tutorial below to get the work done.
    Transcoding (P2) MXF files to ProRes for Final Cut Pro 6/7/X
    1. Import MXF files to the converter
    Launch the best MXF to FCP Converter, and then click the “add files” button to browse and import MXF videos from your camcorder or hard drive.
    2. Select FCP editable format
    Click the Format bar, and move mouse cursor to choose “Final Cut Pro > Apple ProRes 422 (*.mov)” as output format.
    Tips:
    a. Settings- click to set video
    resolution(1920×1080/1440×1080/1280×720/720×480), bitrate (from 1Mbps to
    20Mbps), frame rate (24p/30p)
    b. Editor (next to “Add” icon)- click to set deinterlace, trim, crop, add effect, attach subtitles, etc
    3. Start transcoding MXF video to FCP
    Click “Convert” button to start converting MXF files to Apple ProRes
    MOV for FCP 6/7/X under Mac OS. Once the MXF to ProRes 422 conversion
    is done, you can transfer MXF footage into Final Cut Pro (X) for editing
    smoothly on Mac with ease.
    Source:How to import MXF files to Final Cut Pro with smooth editing
    [quote] jacknjchn.tumblr.com/post/76914947404/cant-import-mxf-footage-to-fcp-transcoding-mxf-to-fcp [/quote]

    You may refer to this step by step guide on how to convert MXF to Final Cut Pro more supported Apple ProRes or DV at http://www.idealshare.net/imovie-fcp/mxf-final-cut-pro.html
    It also applies to convert MXF to other video or audio format. It even applies to convert other videos like AVCHD, MOD, TOD, AVI, and MPEG etc to FCP format.

  • Can not import MXF files into Final Cut Pro

    I am full of anger and frustration!!! I purchased final cut pro only to find out that it WILL NOT import MXF files. How insane is that? ADOBE - NO PROBLEM. Then I had to go back to YOUR STORE and buy two different file converter applications before I found one that worked. Now FINAL CUT PRO will only import the audio segment of converted files after converting to PRORES in PAVTUBE. Are you BUCKING kidding me? This work flow BLOWS. Why the FELL does this have to be sooooo hard!  I am gone to creative cow and other forums to try to find out why I am sooo stupid that I can't get this simple process sorted out. YOU BUCKING MONEY MACHINE! How many more aps will I have to buy before I can edit CANON XF100 files in Final Cut Pro. BUCK politics! You should make your software with plugins that would allow you to edit without this kind of added step. JUST LIKE ADOBE. I want refunds for my final cut pro purchase. This is BUCKING rediculous. What a waste of time!

    Jeff Eyler wrote:
      Good thing I still have an iMac on Snow Leopard with FCP7 where I can import these files.  I was hoping to upgrade that system next month when the new iMac comes out
    There is definite upside to dragging one's feet on upgrades until necessary and this is a prime example. On a desktop running 10.6, and the XF Utility, FCP 7 L&T works reliably. And like you, that's my workflow for FCPX projects. Running 10,7 on a laptop, the EOS plug-in works well for FCPX imports – no workarounds needed. When I finally get around to updating, I will partition the HD, with one SL partition and the other partition with a later OS. Of course this strategy will work only as long as my hardware holds up.
    Russ

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • Media Encoder won't import MXF files from Canon XF100

    I'm running Media Encoder CC on two laptops: a macbook pro and a macbook air. Both systems are running the most recent version of Media Encoder CC (including updates) but only one will import MXF files from a Canon XF100? The macbook air imports and encodes the files without issue, however the macbook pro won't import the same MXF files and kicks the following error:
    The file /Users/.../.../.../AA0106.MXF could not be imported. Could not read from source. Please check the settings and try again.
    I could understand if both computers errored but using the same file, one will import and the other will not. Any help would be greatly appreciated. Thanks.

    Just try this and see if it will work for you.
    Open iPhoto > Preferences > General and deselect 'Connecting camera opens: iPhoto'.
    Change it to 'No Application' and close iPhoto.
    Now connect your camera to your computer and turn it on or better still use a card reader.
    If iMovie tries to open, close it.
    Your camera/card should now appear as an external drive.
    Copy/paste your video files into a new folder on your desktop.
    Eject and disconnect your camera/card.
    Now open iMovie and go File > Import > Movies... and navigate to that folder.
    Z.

  • Importing .MXF file into Premiere Pro

    Hi there, I'd like some advice on how to import .MXF files into Adobe Premiere Pro for editing.
    At university, the Premiere software there can support it. It even has a Canon XF100 preset all ready for .MXF files to be imported into and editing. However, the version I have does not have that preset and thus can not support it.
    I have come across a decent video converter that maintains the HD quality it was recorded in. However, it places a watermark above it unless I buy the full version. I am unsure, and as a student, it is pretty expensive.
    So I'd like to know, is there a way of adding the Canon XF100/.MXF preset into Premiere so I can edit these clips? Or is there a free converter out there which maintains the HD quality without placing a watermark above the video?
    I would greatly appreciate any help and advice for this situation.

    Hi kazpar0071,
    I'm using the latest Macbook Pro, OSX Yosemite. 8.0.1 is the Build number of the software.
    The preset is not there when creating a new sequence, however, I usually just create any sequence then drag and drop the media into the sequence, where Premiere will notify me that the sequence settings are different and whether or not I want to keep the existing settings, or change it, which automatically changes it according to the media.
    This is not the case, as even when I attempt to import the media into Premiere, I get the error message 'Unsupported format or damaged file'.
    Thanks for the info. In your case, the solution usually lies in signing out of Creative Cloud and then signing back in. Sign out, Sign in | Creative Cloud Desktop app
    Does it work now? Afterward, be sure to ingest from the Media Browser and not File > Import or by dragging.
    Thanks,
    Kevin

  • Trouble importing .mxf files into Premiere Pro CS6

    Having problems importing MXF. file types into my Premiere CS6 project. I will go to import the folder and the yellow loading bar will come up to say that it's importing. Then it will freeze and the color wheeled loading symbol will come up (I'm using a Mac) and will just sit there. From there I'm forced to do a force quit on my project and re-open it again. Is there any way to fix this issue and if so what is the problem causing this issue?
    Also my mac is running on OSX v10.7.5 and Premiere is running on cs6 v6.0.2

    Yes, MXF should play perfectly in PP CS6, but if you can't work this out at this point, you may wrap your MXF video to something intermediate. as a matter of face, Adobe Premiere Pro CS6 seems to work fine if you import your MXF clips directly from a camera or camcorder, but if have already copied MXF recordings your HDD or you downloaded them from somewhere else, the import error may occur.
    So i suggest you convert the MXF footage to something mezzanine we would recommend DNxHD.mov (if you are on a PC) or Apple ProRes .mov (if on a mac). those two intermediate codecs are good mezzanine codecs that handle recompression well and standup well in other areas of post-production (color grading, graphics, compositing, etc,). You can see what I wrote about the solution. "Why Premiere Pro CS6 can't import MXF files?" i hope that it is helpful to you.

  • Trouble importing MXF files into Premiere Pro CC

    When importing MXF files into Premier Pro (CC or CS6) from a Canon C300, If I have stopped and started the Camera (during an interview for instance) ie, if there are several takes, multiple duplicate verions of my fooatge appear in the folder on my card, when viewed through the media browser in Premier Pro.
    If I try to ingest the footage into Premiere Pro (CC/CS6) or use Prelude (CC/CS6) the conformed footage file does not start in the right place. Example, an interview with two takes once ingested (as one file) has the second take first.
    Has anybody else encountered this?

    Yes, MXF should play perfectly in PP CS6, but if you can't work this out at this point, you may wrap your MXF video to something intermediate. as a matter of face, Adobe Premiere Pro CS6 seems to work fine if you import your MXF clips directly from a camera or camcorder, but if have already copied MXF recordings your HDD or you downloaded them from somewhere else, the import error may occur.
    So i suggest you convert the MXF footage to something mezzanine we would recommend DNxHD.mov (if you are on a PC) or Apple ProRes .mov (if on a mac). those two intermediate codecs are good mezzanine codecs that handle recompression well and standup well in other areas of post-production (color grading, graphics, compositing, etc,). You can see what I wrote about the solution. "Why Premiere Pro CS6 can't import MXF files?" i hope that it is helpful to you.

  • Issue with importing MXF files - Canon

    The issue is, when importing MXF files from a Canon camera, we experience "spanned" files. This has been occuring now for sometime. Why has Adobe not fixed this. Surely there is a large community using Canon MXF files? Can someone from Adobe or Canon reply to this message. If anyone else has a fix or a workaround other than mannually addressing this, please advise.

    I'm afraid I don't understand the question.
    7.2 now correctly parses the Canon XF .CIF sidecar files to determine whether the media is supposed to be spanned or not.  This has been a feature request that has been finally addressed to work correctly.
    (It also was there in 7.1 & previous, but had limitations:  the performance wasn't as good, there had been issues in the past with audio pops at cut points, and it required that the Canon XF folder structure remain intact, ie if you copied the media to a flattened folder structure, it would fail to do the spanning correctly.)
    If you are looking for a means to disable the automatic spanning, simply removing the .CIF files will achieve that.  Although i'm not sure I understand why you're looking to do that.  Most people *want* spanning to happen automatically, otherwise you're forced to manually sync spanned media segments by hand. 

  • Can´t Import .mxf Files.

    i´ve just updated to premiere pro cc 2014. now i can´t import mxf files anymore. when trying i get an error-message, that something went wrong, but no explanation. so what can i do?, does any body know the problem?
    [Please choose only a short description for the thread title.]
    Message was edited by: Jim Simon

    Try moving or renaming the folder the media is is.

  • How to import MXF file to final cut pro?

    how to import MXF file to final cut pro?

    Directly or XDCAM transfer depending on camera according to this:
    http://en.wikipedia.org/wiki/Material_Exchange_Format
    If it doesn't work, I'd ask the question on Final Cut Pro forum, being sure to mention which version of Final Cut Pro you are using. 

  • How do I import MXF files to final cut?

    I'm trying to import mxf files from avid workflow to cut in Final Cut Pro 7. Any suggestions?

    You ONLY have the Avid MXF files?  You'll need this:
    http://www.calibratedsoftware.com/MXFImport_Mac.asp

  • How to import .MXF files in to FCP?

    Greetings
    I got me some .mxf files on an external drive given to me by someone. They should contain 720p and 1080 video files but instead I was given .mxf files
    What the heck are these things, and how do I get them in FCP? I can't import them as FCP doesn't know what they are... preliminary research indicates that .mxf files have something to do with Panasonic P2 cards (!?)
    Please help

    Here we go again...someone didn't follow the proper procedures and now you are stuck. MXF files are most likely P2, but you really should ask. Because Avid captures as MXF files. Is there a CONTENTS folder, and inside 6 folders, then the MXF files? or just looks files? What are they named? If they have the CONTENTS folder and the entire structure in intact, you need to import them with LOG AND TRANSFER, in the FILE menu. Here's the workflow: P2 Workflow with FCP 6
    If there is no structure like that, then you need to either get RAYLIGHT or MXF4QT or Calibrated software to work with these files in FCP. And that would be the ONLY way. See what happens when people don't do things right?
    Shane

Maybe you are looking for