FCP X Update 10.0.8 results in Multiple Crashes

HW=iMac 24inch Early2009, 8GB RAM; OSX 10.7.5
Made the mistake of updating FCP X to latest version 10.0.8, was having NO issues with previous build, was actually becoming happy with its stability given its shaky start a while back... Now, I can't even do something as simple as add text overlay to a video clip without crashing... Unbelievable!! I'm going to have to fall back to my old fateful Final Cut Express to just get this one job done quickly... Nice Job apple, now I have to trouble shoot your SW again... Sorry community, just had to vent...
Anybody seeing the same issue... Seriously, I have a 4 min clip I'm just trying to add text to, and I've already had 3 crashes in the app in a span of 15 mins... Only thing that has changed is I updated to latest build of FCP X
Very VERY frustrating

Thanks Russ H, I do seem recalling I did that previously with one of the earlier builds, way back when crashes were much more common in FCP X... For the life of me I can't remember the SW I used last time to reset the preferences to defaults.. I have done that again with the suggested SW... Honestly, I needed to get the video done ASAP, so I haven't done much follow up... But following the preference reset, I WAS able to at least hastily added two text overlays without FCP crashing immediately, which is what I was facing even after doing several SW and System Reboots following the update to 10.0.8... Apple has received multiple Crash reports from me today for this issue <smiling> Hopefully it's just me, and not a bunch of others,
I'll continue to trouble shoot On Monday... Pardon my previous rant... It is just so very discouraging when the previous evening everything is working well, and you simply apply an update, and your SW begins to act up...

Similar Messages

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

Hello SuzMiller
Check out the article for the troubleshooting steps for issues with email on your iPhone and iPad.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Dear Customer, It hase come to our attention that your account billing Information records are out of date. That requires you to update your Billing Information. Failure to update your records will result in account termination records... Click on

Dear Customer,
It hase come to our attention that your account billing Information records are out of date. That requires you to update your Billing Information. Failure to update your records will result in account termination records...
Click on the reference link below and enter your login Information on the following page to confirm your Billing Information records..
Verify Now >
Wondering why you got this email?
It's sent when someone adds or changes a contact email address for an Apple ID account. If you didn't do this, don't worry. Your email address cannot be used as a contact address for an Apple ID without your verification.
For more information, see our frequently asked questions.
Thanks,
Apple Customer Support
TM and copyright Â© 2014 Apple Inc. Apple Sales International, Hollyhill Industrial Estate, Cork, Ireland. Company Registration number: 15719. VAT number: IE6554690W.
All Rights Reserved / Keep Informed / Privacy Policy / My Apple ID
Anyone else get this today?
And yep i know this message doesn't go here however the ability to post in general postings to most viewers is lost to me in the ridicules way apple setup there support

It's phishing. Forward it to [email protected] and then delete it.
(118880)

How to update the test case result in MTM using C#

Hi
I have tried the following code but when I execute the same I am getting the testcase result as "In Progress".
How to update the testcase execution result as Passed.
I tried the below code:
public
static
void UpdateResult()
TfsTeamProjectCollection tfs =
new
TfsTeamProjectCollection(TfsTeamProjectCollection.GetFullyQualifiedUriForName(server));
ITestManagementService tms = tfs.GetService<ITestManagementService>();
ITestManagementTeamProject proj = tms.GetTeamProject(project);
ITestPlan Plan = proj.TestPlans.Find(1);
ITestRun testRun = proj.TestRuns.Create();
testRun = Plan.CreateTestRun(false);
ITestPointCollection points = Plan.QueryTestPoints("SELECT
* FROM TestPoint");
foreach (ITestPoint
p in points)
testRun.AddTestPoint(p,Plan.Owner);// null);
testRun.State = TestRunState.Completed;
testRun.Save();
ITestCaseResultCollection results = testRun.QueryResults();
ITestIterationResult iterationResult;
foreach (ITestCaseResult
result in results)
iterationResult = result.CreateIteration(1);
foreach (ITestStep
testStep in result.GetTestCase().Actions)
ITestStepResult stepResult = iterationResult.CreateStepResult(testStep.Id);
stepResult.Outcome = TestOutcome.Passed;
iterationResult.Actions.Add(stepResult);
iterationResult.Outcome = TestOutcome.Passed;
result.Iterations.Add(iterationResult);
result.Save();
results.Save(true);
testRun.Save();
testRun.Refresh();

Hi Mohammed,
Sorry for my delay.
According to your code, I have been modified your code in my side and it can work fine. So you can refer the following code to check your issue in your side.
Reference:
publicstaticvoidUpdateResult()
TfsTeamProjectCollectiontfs
= newTfsTeamProjectCollection(TfsTeamProjectCollection.GetFullyQualifiedUriForName(server));
ITestManagementServicetms
= tfs.GetService<ITestManagementService>();
ITestManagementTeamProjectproj
= tms.GetTeamProject(project);
ITestPlanPlan = proj.TestPlans.Find(1);
IStaticTestSuitesuite
= Plan.RootSuite.SubSuites.Where(s
=> s.Id == 1339).First()
asIStaticTestSuite;
ITestCasetestcase
= null;
testcase
= suite.Entries.Where(e
=> e.Title == "login").First().TestCase;
ITestRuntestRun
= project.TestRuns.Create();
testRun
= Plan.CreateTestRun(false);
ITestPointCollectionpoints
= Plan.QueryTestPoints("SELECT * FROM TestPoint WHERE TestCaseId ="+
testcase.Id);
foreach(ITestPointp
inpoints)
testRun.AddTestPoint(p,
Plan.Owner);// null);
//testRun.AddTestPoint(p, null);
testRun.State =
TestRunState.Completed;
            testRun.Save();
ITestCaseResultCollectionresults
= testRun.QueryResults();
ITestIterationResultiterationResult;
foreach(ITestCaseResultresult
inresults)
                iterationResult = result.CreateIteration(1);
foreach(ITestSteptestStep
inresult.GetTestCase().Actions)
ITestStepResultstepResult
= iterationResult.CreateStepResult(testStep.Id);
                    stepResult.Outcome
= TestOutcome.Passed;
                    iterationResult.Actions.Add(stepResult);
               iterationResult.Outcome
= TestOutcome.Passed;
result.Iterations.Add(iterationResult);
result.Outcome
= TestOutcome.Passed;
result.State = TestResultState.Completed;
result.Save(true);
testRun.Save();
testRun.Refresh();
Note: you will need to
base on your requirement to modify the code such as modify the testsuite id and title in your side.
In addition, I find a blog about TFS API that can help you:
# Code snippets on Test Management APIs
http://blogs.msdn.com/b/aseemb/archive/2012/08/07/code-snippets-on-test-management-apis.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to clear last payroll result of multiple workers?

Experts,
My requirement is to delete the last payroll result of multiple employees.
PU01 allows to delete for only one employee at a time.
I tried to create a BDC but not working. Is there any other alternative to do so.
Regards.

here it is:
loop at pa_pernr.
PERFORM bdc_dynpro     USING 'RPCDPU01'   '1000'.
PERFORM bdc_field          USING 'BDC_CURSOR' 'RP50G-PERNR'.
PERFORM bdc_field          USING 'BDC_OKCODE' '=STAR'.
PERFORM bdc_field          USING 'RP50G-PERNR' pa_pernr-low.
PERFORM bdc_dynpro     USING 'SAPLSLVC_FULLSCREEN' '0500'.
PERFORM bdc_field          USING 'BDC_OKCODE' '=DELE'.
PERFORM bdc_dynpro     USING 'SAPLSPO1'   '0300'.
PERFORM bdc_field          USING 'BDC_OKCODE' '=YES'.
CALL TRANSACTION 'PU01' USING bdcdata MODE 'A' UPDATE 'S'.
endloop.
" pa_pernr-low contains the employed id number.

10.5.7 Update Possible Fix for Mail and Safari crash

Hi all,
I'm far from a computer whiz, but I've had both my MBP and my MacMini go kaput within 12 hours of each other from what had to be 10.5.7 update. I did the software update install on both without backup :0(
Anyhoo, I was experiencing same problems as many on the boards. Mail would crash, Safari would crash, etc. Spent three hours and two minutes on phone with Apple Care. Not overly helpful but they tried.
Ended up creating a new user and migrating data. Took the better part of a day. I do not recommend! Downloading whole installer kind of daunting as I am in Saudi Arabia where internet can be...sketchy...
I found this post below here and it fixed everything on my Mini. I'm not guaranteeing anything, but it sure helped me. You may want to try it if everything else is not working...
Props to rwtroxel!
Posts: 2
Registered: 6/26/09
Re: Mail 3.6 crash
Posted: Jun 26, 2009 12:22 PM
I think I figured it out. Deleted "Internet Plug-Ins/JavaPluginCocoa.bundle" and everything now works.

Problems arising right after installing a system update are usually the result of the problem already being there, or some filesystem corruption that should have been fixed first, or not having installed the update properly (e.g. applications running while installing it), or having ignored Apple’s “Important: Please read before installing” warnings, etc.
Quit all the applications and verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, if you’ve installed Safari 3 Beta, uninstall that first, then reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
About the Mac OS X 10.4.10 Combo Update
Mac OS X 10.4.10 Combo Update for PowerPC
Mac OS X 10.4.10 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
If you installed the latest Security Update, you may need to reinstall that as well:
Security Update 2007-006 (Universal)
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.
BTW, please update the Operating System field on your My Settings’s profile (and click Save), so that the version of Mac OS X you’re running now automatically appears in all your posts and not just in some of them.

BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next?

BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition

Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
End result, a successful restore to factory settings and a happy 14 year old.
Hope this helps others.

My Lion update includes Safari 5.1.6 which crashes as soon as it opens. Help!

My Lion update includes Safari 5.1.6 which crashes as soon as it opens. Help!

Many thanks, hpr3!! And to Gregory from Cork too!! The fix resolved the issue with Safari crashing immediately upon opening. Sweet! Craigvv

While updating to ios 6 my iphone has crashed

while updating to ios 6 my iphone has crashed, and is now stuck on the installation screen. anyone know what i can do from here?

I'm having the same problems. Can't even find out if Apple is working on it. Tried to downgrade but is not supported by apple so error 3194 comes up which is verifying with the apple web site. Which then stops everything. I understand you can modify the "hosts" file to by pass the issue, but hate doing that as it gets involved. May try it if I can't get any satisfaction from apple.

Last night I downloaded the latest Word update. Today the first Word document crashed and I lost 45 minutes of work in spite of having saved the document numerous times. Why is Word crashing the day after a safety update? I have Office 2008 for Mac

Last night I downloaded the latest Word update. Today the first Word document crashed and I lost 45 minutes of work in spite of having saved the document numerous times. Why is Word crashing the day after a safety update? I have Office 2008 for Mac

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Open Console in Applications>Utilities, check the system log for the date/time of the last problem & next startup for clues.

After the recent update on my Ipad Mini. It crashes frequently. The latest is that during saving, it crashed. Now I can't open my project file. It says, Not a valid Adobe Photoshop Touch file. What happened?!!

After the recent update on my Ipad Mini. It crashes frequently. The latest is that during saving, it crashed. Now I can't open my project file. It says, Not a valid Adobe Photoshop Touch file. What happened?!!

Sufficient free storage.... tried the reboot and install... Just received an iOS update I'll install tonight and do another reboot...see what happens. Going to have to start saving double..

HT201210 tried to update to ios 6.1 and it crashed my phone, plugged it into itunes like it told me to and it said i needed to restore it, so tried and it failed and it just keeps failing. its an iphone 4. what do i do?!

HELP.
tried to update to ios 6.1 and it crashed my phone, plugged it into itunes like it told me to and it said i needed to restore it, so tried and it failed and it just keeps failing. its an iphone 4. what do i do?!

it just says restore failed error 3194 but i can't find anything useful on google or anything i can understand, i don't get technology at all.

Firefox crashes on Youtube site. "Restore session" window is corrupted & results in repeated crashes

Running Firefox 3.6.13 on Mac G5 OS 10. 4, dual 2.0GHz, ton of memory.
This started happening 6 months ago.
With 4 or mare other tabs open, watching video on youtube results in a crash 50% of the time. The "Opps This is embarrassing" window appears, but the checkmarks are not there next to the icons. Clicking the icons makes the icons reappear and disappear, but ultimately, Firefox attempts to load ALL the tabs/pages, so obviously "clicking" is not unchecking anything.
This means '''I never was able to uncheck''' the possible offending site(s), which makes troubleshooting nearly impossible because I essentially can't trouble shoot a problem site(s), using Firefoxe's method. I don't know it youtube, I simply suspect that.
'''When Firefox restarts it immediately crashes again, and over and over. '''
I have four crash report codes from today.
The only solution is to log out of my account, and log back in. That seems to work.
But I'm trying to fix the "restore window" that never shows the checkmarks anymore. Do I reinstall forefox? This has happened with the last 3 versions, and has never solved the problem. Seems like some kind of preference file corruption?, since firefox acts the same way no matter what version of 3.6 I run.
The last four error codes from the first crash to the most recent are:
Crash ID: bp-9d0ea936-8c65-42e6-a659-7e0c82110520
Crash ID: bp-1618de88-bdc9-4023-abd3-4e0632110520
Crash ID: bp-13e7319a-0327-4d52-a77a-0db032110520
Crash ID: bp-60e0489f-3762-4517-b175-703fc2110520
Any help appreciated. Thanks

No, you wont lose any bookmarks.<br />
You only lose tabs that you have marked as "Pin as App Tab" via the right-click context menu of that tab and other tabs from the current session.<br />
You can bookmark an Ap tab if you haven't done that yet.

I downloaded firefox update had nothing but troubles since comp crashing how do i send my bookmarks from firefox to ie on this system

i downloaded firefox update, had nothing but troubles since, computer crashing when i try to open, or cursor lag for a long time ie. i try to move to do something it has to think about for 30 seconds to having to pushing reset to get anthing hapening
but still freezes up i put my comp into a very good repair store cost me $119 to only to find no problem with computer, they had it running ,burning , doing everything properly, but they were using ie, as soon as i stoped that and went to firefox, back to lag etc. com bluescreen then crashing when i got home twice so far tried using previous version in system same problem, how do i send my bookmarks from firefox to ie on this system, so i can completely uninstall then reistall a fresh earlier version

I have to agree, fixing something that was working fine and replacing it with the new crap has led me to switch browsers.BIG FAIL MOZILLA
Why do people do this shit.
Turn off updating to keep your good working version or you will be forced to use the new version that is missing some well used features.

Trying to launch Flash builder 4 results in a crash.

Hi,
After installing the Flash builder 4 any attemp to launch it results in a crash with the following message :
A fatal error has been detected by the Java Runtime Environment:
Internal Error (0xe06d7363), pid=2612, tid=2548
JRE version: 6.0_16-b01
Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode windows-x86 )
Problematic frame:
C [kernel32.dll+0x12afb]
An error report file with more information is saved as:
C:\Documents and Settings\eyal.EYAL-NEW2\hs_err_pid2612.log
If you would like to submit a bug report, please visit:
   http://java.sun.com/webapps/bugreport/crash.jsp
The crash happened outside the Java Virtual Machine in native code.
See problematic frame for where to report the bug.
the error log output :
# A fatal error has been detected by the Java Runtime Environment:
# Internal Error (0xe06d7363), pid=2856, tid=3052
# JRE version: 6.0_16-b01
# Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode windows-x86 )
# Problematic frame:
# C [kernel32.dll+0x12afb]
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x00906c00): JavaThread "main" [_thread_in_native, id=3052, stack(0x00030000,0x00130000)]
siginfo: ExceptionCode=0xe06d7363, ExceptionInformation=0x19930520 0x0012be20 0x35f00800
Registers:
EAX=0x0012bd78, EBX=0x0012bee0, ECX=0x00000000, EDX=0x00000003
ESP=0x0012bd74, EBP=0x0012bdc8, ESI=0x0012be00, EDI=0x0012c194
EIP=0x7c812afb, EFLAGS=0x00000206
Top of Stack: (sp=0x0012bd74)
0x0012bd74:   0012bec4 e06d7363 00000001 00000000
0x0012bd84:   7c812afb 00000003 19930520 0012be20
0x0012bd94:   35f00800 360bb9a8 360bda10 00000017
0x0012bda4:   00000017 0012be2c 00000000 35e119cf
0x0012bdb4:   360bb9a8 0000001f 360bda10 00000017
0x0012bdc4:   0012c194 0012be00 35e5716a e06d7363
0x0012bdd4:   00000001 00000003 0012bdf4 e06d7363
0x0012bde4:   00000001 00000000 00000000 00000003
Instructions: (pc=0x7c812afb)
0x7c812aeb:   8d 7d c4 f3 a5 5f 8d 45 b0 50 ff 15 10 15 80 7c
0x7c812afb:   5e c9 c2 10 00 85 ff 0f 8e 36 93 ff ff 8b 55 fc
Stack: [0x00030000,0x00130000], sp=0x0012bd74, free space=1007k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [kernel32.dll+0x12afb]
C [amtservices.dll+0x4716a]
C [amtservices.dll+0x727a8]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.adobe.flexide.amt.AMTLib.AMTObtainProductLicense(IILjava/lang/String;Ljava/lang/Strin g;Ljava/lang/String;Ljava/lang/String;IILjava/lang/String;)I+0
j com.adobe.flexide.amt.AMTLib.ObtainProductLicense(Ljava/lang/String;Ljava/lang/String;Lja va/lang/String;Ljava/lang/String;IILjava/lang/String;Z)I+27
j com.adobe.flexide.amt.Activator.AMT_ObtainLicense(Ljava/lang/String;Ljava/lang/String;IIZ )I+32
j com.adobe.flexbuilder.ui.asn.ASNUIBridge.start()Z+43
j com.adobe.flexbuilder.ui.UIPlugin.start(Lorg/osgi/framework/BundleContext;)V+21
j org.eclipse.osgi.framework.internal.core.BundleContextImpl$1.run()Ljava/lang/Object;+64
v ~StubRoutines::call_stub
j java.security.AccessController.doPrivileged(Ljava/security/PrivilegedExceptionAction;)Lja va/lang/Object;+0
j org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(Lorg/osgi/frame work/BundleActivator;)V+22
j org.eclipse.osgi.framework.internal.core.BundleContextImpl.start()V+23
j org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(I)V+379
j org.eclipse.osgi.framework.internal.core.AbstractBundle.start(I)V+20
j org.eclipse.osgi.framework.util.SecureAction.start(Lorg/osgi/framework/Bundle;I)V+8
J org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(Ljava/lan g/String;Ljava/lang/Class;Lorg/eclipse/osgi/baseadaptor/loader/ClasspathManager;)V
J org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(Ljava/lang/String;)Lj ava/lang/Class;
J org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass(Ljava/lang/String;)Ljava/lan g/Class;
j org.eclipse.osgi.internal.loader.SingleSourcePackage.loadClass(Ljava/lang/String;)Ljava/l ang/Class;+8
J org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(Ljava/lang/String;ZLjava/ lang/ClassLoader;)Ljava/lang/Class;
J org.eclipse.osgi.internal.loader.BundleLoader.findClass(Ljava/lang/String;Z)Ljava/lang/Cl ass;
J org.eclipse.osgi.internal.loader.BundleLoader.findClass(Ljava/lang/String;)Ljava/lang/Cla ss;
J org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(Ljava/lang/String;Z)Lj ava/lang/Class;
J java.lang.ClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class;
J java.lang.ClassLoader.loadClassInternal(Ljava/lang/String;)Ljava/lang/Class;
v ~StubRoutines::call_stub
j com.adobe.flexbuilder.standalone.SplashHandler.init(Lorg/eclipse/swt/widgets/Shell;)V+120
j org.eclipse.ui.internal.Workbench$6.run()V+174
j org.eclipse.core.runtime.SafeRunner.run(Lorg/eclipse/core/runtime/ISafeRunnable;)V+5
j org.eclipse.ui.internal.Workbench.createSplashWrapper()V+32
j org.eclipse.ui.internal.Workbench.runUI()I+111
j org.eclipse.ui.internal.Workbench.access$4(Lorg/eclipse/ui/internal/Workbench;)I+1
j org.eclipse.ui.internal.Workbench$5.run()V+55
j org.eclipse.core.databinding.observable.Realm.runWithDefault(Lorg/eclipse/core/databindin g/observable/Realm;Ljava/lang/Runnable;)V+12
j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display; Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+18
j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/ecl ipse/ui/application/WorkbenchAdvisor;)I+2
j com.adobe.flexbuilder.standalone.FlexBuilderApplication.start(Lorg/eclipse/equinox/app/IA pplicationContext;)Ljava/lang/Object;+100
j org.eclipse.equinox.internal.app.EclipseAppHandle.run(Ljava/lang/Object;)Ljava/lang/Objec t;+135
j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(Ljava/lang/Ob ject;)Ljava/lang/Object;+103
j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(Ljava/lang/Object;)Lja va/lang/Object;+29
j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object; +149
j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnabl e;)Ljava/lang/Object;+183
v ~StubRoutines::call_stub
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object; [Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/l ang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Lja va/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+ 161
j org.eclipse.equinox.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+21 1
j org.eclipse.equinox.launcher.Main.basicRun([Ljava/lang/String;)V+114
j org.eclipse.equinox.launcher.Main.run([Ljava/lang/String;)I+4
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x33ee8400 JavaThread "Thread-1" [_thread_in_native, id=3284, stack(0x35ad0000,0x35bd0000)]
0x337c8000 JavaThread "Worker-1" [_thread_blocked, id=3304, stack(0x34d00000,0x34e00000)]
0x33e81800 JavaThread "[Timer] - Main Queue Handler" daemon [_thread_blocked, id=3308, stack(0x34ba0000,0x34ca0000)]
0x33d5e400 JavaThread "Provisioning Event Dispatcher" daemon [_thread_blocked, id=3292, stack(0x349a0000,0x34aa0000)]
0x34184c00 JavaThread "Worker-0" [_thread_blocked, id=3360, stack(0x348a0000,0x349a0000)]
0x33f51c00 JavaThread "Bundle File Closer" daemon [_thread_blocked, id=3508, stack(0x33f80000,0x34080000)]
0x336ee400 JavaThread "Start Level Event Dispatcher" daemon [_thread_blocked, id=3408, stack(0x33a80000,0x33b80000)]
0x336bc800 JavaThread "Framework Event Dispatcher" daemon [_thread_blocked, id=3456, stack(0x33980000,0x33a80000)]
0x336d8800 JavaThread "State Saver" [_thread_blocked, id=2624, stack(0x33880000,0x33980000)]
0x32d87400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3452, stack(0x333f0000,0x334f0000)]
0x32d81800 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2876, stack(0x332f0000,0x333f0000)]
0x32d7bc00 JavaThread "Attach Listener" daemon [_thread_blocked, id=2796, stack(0x331f0000,0x332f0000)]
0x32d7a800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3320, stack(0x330f0000,0x331f0000)]
0x32d64c00 JavaThread "Finalizer" daemon [_thread_blocked, id=1432, stack(0x32ff0000,0x330f0000)]
0x32d63400 JavaThread "Reference Handler" daemon [_thread_blocked, id=3288, stack(0x32ef0000,0x32ff0000)]
=>0x00906c00 JavaThread "main" [_thread_in_native, id=3052, stack(0x00030000,0x00130000)]
Other Threads:
0x32d60400 VMThread [stack: 0x32df0000,0x32ef0000] [id=2892]
0x32d89c00 WatcherThread [stack: 0x334f0000,0x335f0000] [id=3448]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation   total 18176K, used 4329K [0x029e0000, 0x03d90000, 0x05140000)
eden space 16192K, 20% used [0x029e0000, 0x02d30c68, 0x039b0000)
from space 1984K, 47% used [0x03ba0000, 0x03c89a88, 0x03d90000)
to   space 1984K,   0% used [0x039b0000, 0x039b0000, 0x03ba0000)
tenured generation   total 241984K, used 10583K [0x05140000, 0x13d90000, 0x229e0000)
   the space 241984K,   4% used [0x05140000, 0x05b95c38, 0x05b95e00, 0x13d90000)
compacting perm gen total 65536K, used 15300K [0x229e0000, 0x269e0000, 0x329e0000)
   the space 65536K, 23% used [0x229e0000, 0x238d13a8, 0x238d1400, 0x269e0000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0040e000 C:\Program Files\Adobe\Adobe Flash Builder 4\FlashBuilderC.exe
0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll
0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll
0x5d090000 - 0x5d12a000 C:\WINDOWS\system32\COMCTL32.dll
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f03000 C:\WINDOWS\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\MSVCRT.dll
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL
0x629c0000 - 0x629c9000 C:\WINDOWS\system32\LPK.DLL
0x74d90000 - 0x74dfb000 C:\WINDOWS\system32\USP10.dll
0x72000000 - 0x72014000 C:\Program Files\Adobe\Adobe Flash Builder 4\plugins\org.eclipse.equinox.launcher.win32.win32.x86_1.0.200.v20090519\eclipse_1206.dll
0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll
0x6d800000 - 0x6da8b000 C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin\client\jvm.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x7c340000 - 0x7c396000 C:\WINDOWS\system32\MSVCR71.dll
0x6d7b0000 - 0x6d7bc000 C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin\verify.dll
0x6d330000 - 0x6d34f000 C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin\java.dll
0x6d290000 - 0x6d298000 C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin\hpi.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
0x6d7f0000 - 0x6d7ff000 C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin\zip.dll
0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll
0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll
0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\netapi32.dll
0x6d610000 - 0x6d623000 C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin\net.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll
0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll
0x6d630000 - 0x6d639000 C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin\nio.dll
0x34ca0000 - 0x34cf9000 C:\Program Files\Adobe\Adobe Flash Builder 4\configuration\org.eclipse.osgi\bundles\298\1\.cp\swt-win32-3555.dll
0x774e0000 - 0x7761e000 C:\WINDOWS\system32\ole32.dll
0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.dll
0x763b0000 - 0x763f9000 C:\WINDOWS\system32\comdlg32.dll
0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.6028_x-w w_61e65202\COMCTL32.dll
0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll
0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\SHELL32.dll
0x3d930000 - 0x3da16000 C:\WINDOWS\system32\WININET.dll
0x34e10000 - 0x34e19000 C:\WINDOWS\system32\Normaliz.dll
0x78130000 - 0x78263000 C:\WINDOWS\system32\urlmon.dll
0x3dfd0000 - 0x3e1b9000 C:\WINDOWS\system32\iertutil.dll
0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll
0x74720000 - 0x7476c000 C:\WINDOWS\system32\MSCTF.dll
0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime
0x35250000 - 0x35264000 C:\Program Files\Adobe\Adobe Flash Builder 4\configuration\org.eclipse.osgi\bundles\298\1\.cp\swt-gdip-win32-3555.dll
0x4ec50000 - 0x4edfb000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.6001.22319_x-ww_f0b4c 2df\gdiplus.dll
0x356e0000 - 0x35721000 C:\Program Files\Adobe\Adobe Flash Builder 4\plugins\com.adobe.flexide.nativelibs_4.0.1.277662\os\win32\x86\BridgeTalk.dll
0x35860000 - 0x358ca000 C:\Program Files\Adobe\Adobe Flash Builder 4\plugins\com.adobe.flexide.nativelibs_4.0.1.277662\libs\adobe_caps.dll
0x77920000 - 0x77a13000 C:\WINDOWS\system32\SETUPAPI.dll
0x77690000 - 0x776b1000 C:\WINDOWS\system32\NTMARTA.DLL
0x71bf0000 - 0x71c03000 C:\WINDOWS\system32\SAMLIB.dll
0x35730000 - 0x35747000 C:\Program Files\Adobe\Adobe Flash Builder 4\plugins\com.adobe.flexbuilder.utils.osnative_4.0.1.277662\os\win32\x86\JNIToNativeBridg e.dll
0x35cd0000 - 0x35cda000 C:\Program Files\Adobe\Adobe Flash Builder 4\plugins\com.adobe.flexide.amt_4.0.1.277662\os\win32\x86\amt_win_jnilib.dll
0x78480000 - 0x7850e000 C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.30729.4974_x-ww_d889290f\MSV CP90.dll
0x78520000 - 0x785c3000 C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.30729.4974_x-ww_d889290f\MSV CR90.dll
0x35d00000 - 0x35de6000 C:\Program Files\Adobe\Adobe Flash Builder 4\plugins\com.adobe.flexide.amt_4.0.1.277662\os\win32\x86\amtlib.dll
0x35e10000 - 0x35f24000 C:\Program Files\Adobe\Adobe Flash Builder 4\plugins\com.adobe.flexide.amt_4.0.1.277662\os\win32\x86\amtservices.dll
0x76d60000 - 0x76d79000 C:\WINDOWS\system32\IPHLPAPI.DLL
0x4d4f0000 - 0x4d549000 C:\WINDOWS\system32\WINHTTP.dll
0x361c0000 - 0x3622a000 C:\Program Files\Adobe\Adobe Flash Builder 4\plugins\com.adobe.flexide.amt_4.0.1.277662\os\win32\x86\adobe_caps.dll
0x36350000 - 0x36378000 C:\Program Files\Adobe\Adobe Flash Builder 4\plugins\com.adobe.flexide.amt_4.0.1.277662\os\win32\x86\asneu.dll
0x364a0000 - 0x36765000 C:\WINDOWS\system32\xpsp2res.dll
0x76fd0000 - 0x7704f000 C:\WINDOWS\system32\CLBCATQ.DLL
0x77050000 - 0x77115000 C:\WINDOWS\system32\COMRes.dll
0x74ef0000 - 0x74ef8000 C:\WINDOWS\system32\wbem\wbemprox.dll
0x75290000 - 0x752c7000 C:\WINDOWS\system32\wbem\wbemcomn.dll
0x74ed0000 - 0x74ede000 C:\WINDOWS\system32\wbem\wbemsvc.dll
0x75690000 - 0x75706000 C:\WINDOWS\system32\wbem\fastprox.dll
0x76080000 - 0x760e5000 C:\WINDOWS\system32\MSVCP60.dll
0x767a0000 - 0x767b3000 C:\WINDOWS\system32\NTDSAPI.dll
0x76c30000 - 0x76c5e000 C:\WINDOWS\system32\WINTRUST.dll
0x77a80000 - 0x77b15000 C:\WINDOWS\system32\CRYPT32.dll
0x77b20000 - 0x77b32000 C:\WINDOWS\system32\MSASN1.dll
0x76c90000 - 0x76cb8000 C:\WINDOWS\system32\IMAGEHLP.dll
VM Arguments:
jvm_args: -Xms256m -Xmx512m -XX:MaxPermSize=256m -XX:PermSize=64m -Djava.net.preferIPv4Stack=true -Dorg.eclipse.equinox.p2.reconciler.dropins.directory=dropins
java_command: <unknown>
Launcher Type: generic
Environment Variables:
PATH=C:/Program Files/Adobe/Adobe Flash Builder 4/jre/bin/client;C:/Program Files/Adobe/Adobe Flash Builder 4/jre/bin;C:\Program Files\ATI Stream\bin\x86;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\Core-Static;D:\1Dev\apache-ant-1.8.0RC1\bin;D:\1Dev\1Funtactix\Anima tionEarth\ci_scripts;D:\1Dev\1Funtactix\AnimationEarth\ci_scripts\moreshell;D:\1dev\php;D: \1Dev\php\ext;D:\1Dev\php;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Java\jre1.6.0\bin;C:\Program Files\Java\jre1.6.0\bin\client;
USERNAME=eyal
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 4 (4 cores per cpu, 1 threads per core) family 6 model 23 stepping 10, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3
Memory: 4k page, physical 2097151k(2097151k free), swap 4194303k(4194303k free)
vm_info: Java HotSpot(TM) Client VM (14.2-b01) for windows-x86 JRE (1.6.0_16-b01), built on Jul 31 2009 11:26:58 by "java_re" with MS VC++ 7.1
time: Mon Dec 20 10:01:49 2010
elapsed time: 3 seconds
Need help A.S.A.P!
thanks.

Which OS, JVM?
Try installing Java 1.6 (32-bit) again. Also verify that right clicking FlashBuilder.exe, Properties, Digital Signatures, it confirms that the executable is from Adobe.

FCP X Update 10.0.8 results in Multiple Crashes

Similar Messages

Maybe you are looking for