FCP3 capturing media for internet use

I was wondering how to capture media on fcp3 for use on the net. Without compressing afterward if possible. Is there a preset I can set up for or is my only chance to compress the video afterward? Example: Load a 3minute clip in as a mp3 or wmv or anything else?
G4 Flatscreen Mac OS X (10.3.9)

Once it is captured, you can export it to a number of formats if you have the installed codecs.
Having Quicktime Pro is very useful for this as is Sorenson and/or Flash Pro (if you are trying to compress for web use).
One of the great things about FCP4.5 and up is Compressor, which has a great array of alternative output formats.
good luck.
x

Similar Messages

IMAQdx USB Camera low Resolution -- "For internet Use" Option?

Hello,
I have a USB camera that is directshow compliant. The resolution of the camera should be close to 2600x2000 (not sure on exact). When I see available "Video Modes", the highest resolution is 352x288 resolution.
The company supplying the camera told me to uncheck "For internet Use" in the property Panel to help fix the resolution problem.
I don't see this option anywhere. I looked in the IMAQdx property node as well for any "internet attribute"
Any ideas on where this option is or how I can fix this poor resolution?
Thanks,
Tony
Solved!
Go to Solution.

Hello Lawrence,
I contacted the vendor and they sent me a "registration entries" file. To update you just open the file. I was using a Moticam camera and the original SDK didn't allow for some of the changes in the directshow driver so that is why they sent an update. If you are also using Moticam, I can send you the same file, otherwise, contact the vendor directly.
-Tony

Is jdbc thin driver not designed for internet use?

Is jdbc thin driver not designed for internet use?
The size of the thin-driver file is about 1MB of size and is
too large if were to ask clients to download it from the
internet.
Can anyone advise on this issue?
null

You need to remote onto the server and go into start->control panel-Administration-> ODBC (or sometimes start->administration->ODBC) and set up ODBC connections . Make sure you set them up on the system tab, then you should see them in EAS. I don't remember, b ut don't think you need to restart the Essbase servise for them to take effect

Log and capture problems for HDV using FCP 5.0.1

I cant seem to get a picture in my log and capture browser when using HDV. The screen says my camera is connected, I see timecode correctly rolling in sync with my cameras timecode, I can use the controls, but no picture on the screen?
When I hit capture now, the capture screen pops up and gives a message "waiting for data from device".
we shot at 720p at 25fps, there is no capture preset for this in my version of FCP. Could this be the problem? Please help!!

Thanks for responding.
It's a mac osx 10.4.11 and a 2 ghz intel core duo. I'm using easy set up in final cut pro, but there is no option for hd fire wire basic (which apple support told me to look for). The only hd options are 1080i50, i60 and 720 p30. The other hd options are for the apple intermediate codec. When I use the easy set up for hd 1080i60, then go to log and capture, it doesn't give me the preview window to set in's out, batch capture etc. It only lets me capture straight from the camera and I have to manually stop it and start it which is a major pain. Plus the clips need to be rendered once I put them in a timeline. I've shot and edited on mini dv with final cut for nearly 7 years, but now that i've tried to upgrade and shoot hd mini dv, all of these problems have arrived in capturing. I'm starting to think my version of final cut pro (5.0.1) just doesn't work with hd, unless it's very time consuming. Any ideas?

Brand new iMac, and the load time for internet use is very poor

Brought my new iMac home today. 2.7 GHz intel core i5
Got it set up with my wireless and i am very unimpressed with the internet and loading speed. My phone, 1 lap top, and 1 ipad use wireless in our house along with the iMac. i have a cisco linksys E2500 is that sufficient enough all of my usage? No gaming more than what a todler would play on. Basic internet use and editing pictures.
My question i guess is, is it my router or are iMac's just not that fast?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

I'm going to Europe and will have my iPad along, any tips on the best plans for Internet use etc?

Any tips for international use with iPad?

Since storage space is not a limiting factor for you, you might want to take a look at Apple Lossless. Lossless will give you the equivalent audio quality of an uncompressed format such as WAV or AIFF with about a 30% decrease in file size compared to the uncompressed formats. Keep in mind that if you have an iPod, these Lossless fies will severely decrease your iPod capacity. For instance, a 30GB iPod importing the avg. 4 minute song in Lossless will only hold about 1150 songs.
Personally, I use AAC @ 256 which I find comes pretty darn close to the original CD quality with a large decrease in file size. I have a 60GB iPod, so I was willing to sacrifice some iPod capacity for the improved audio quality.

Resizing for internet use

Hi all,
I'm hoping you can help with this one. In order to upload some photos to the internet they need to be not more than 100 pixels wide by 100 pixels in height, they must also be not more than 10KB in file size. My Aperture photos are normally around 2 megapixels. Is there a way of downsizing to the above dimensions in Aperture?
Help appreciated
Pete

I do not have Aperture on the box I am using at the moment, but you can achieve 10KB size in Photoshop by using File/Save For Web with low enough settings. Standard JPEG saves in PS will not go that low.
-Allen Wicks

Connecting SonyE K750i + MacBook Pro for Internet use

Hi there,
i´tried to connect my Mobile Phone Sony Ericsson K750i with my MacBook Pro. It worked so far as i tried so sync both. Or to send pictures from MacBook to the Phone. But, and that gets on my nervs, i tried to use the Phone as a modem - to download my e-mails. I didn´t worked so far. My Provider is O2 Germany. I tried the numbers *99#, 99**1# to 99**6# (APN) and other tricks.
Does anybody have an Ideeeeeeee!
Thanks anyway

a suggestion that worked for me;
http://www.taniwha.org.uk/files/GenericPhoneScripts2005-09.zip
that file includes a couple of GPRS script for macosx.
if you use one of them as your dialup profile and then instead of dialing your gprs number(*99# or whatnot) enter your APN in the dialup string (i entered "internet"). This way i get a connection to the web through gprs.

TS3367 Face time settings for Internet use only.

What setting do I use to ensure that I am only using the Internet to face time and not using my mobile?

Settings>FaceTime.
Turn "Use Cellular Data" off.

Wired for office wifi for internet

please help me on how to assign ip address to work station that uses wired connection for office office server and wireless connection for internet use, simultaneously
Posted by WebUser Betong Lim from Cisco Support Community App

hi seb_rupik
i found out that the network that has internet uses both wired and wireless connections, and also uses dhcp, and an access point is also connected to this network for the wireless clients on the other office, we use cisco wireless router for this network that has internet
and the other network that we use for our office network and connected to a server uses only wired connections and uses dhcp also
clients need to use both internet and server connection simultaneously as required by our job
it seems that there are conflicts, when connected to office server the internet connection drops, and when about 2 0r 3 clients are connected to the net others cant make it,
ill try try to post the output of ipconfig
thank you very much
Posted by WebUser Betong Lim from Cisco Support Community App

Paying for 3G use

I do not know if i should buy the ipad with 3g or not. I would like to buy it if they have the 250 mb data use for 15$. Can anybody answer me if the 15$ price is worldwide for internet use. I live in Norway so I do not know if it would be the same price.....?
Message was edited by: MrDaniel96

You'll have to ask your carrier what they will charge. It sounds like you are looking at the US website which lists the data plans for ATT in the US. If we travel outside the US then ATT charges us international roaming which is quite expensive.

Prerequisites for using capture media

I am a true believer in using Build and Capture and have never used capture media to generate a WIM from a reference computer. I do believe there are some scenarios where the capture media is required. I have a few questions about using capture
media. Should the ConfigMgr client be deployed on the reference computer before capturing? I believe the answer is no. I think it could be buty it would be cleaner to leave it off.
Should SCEP be deployed on the reference computer before capturing? I believe the answer is no. Are there any guidelines outlining these particular type questions?
I believe there is a reason why SCEP should not be deployed before the capture, but I can't find a reference to the reason.
Thanks

Hi,
Install the ConfigMgr client, the SCEP client could be installed, I would leave it of and use Chris script solution to install it during OSD,
http://www.chrisnackers.com/2012/10/18/configuration-manager-2012-installing-endpoint-protection-during-a-task-sequence/ so you deploy it together with the latest Definition updates as well. the biggest reason to leave scep out of the image is that it will
be outdated anyway.
But in some scenarios with speific requirements I have left it in there, in that case read this on how to prepare the SCEP client :
http://technet.microsoft.com/en-us/library/dn236350.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Since the capture media is no longer working for capturing Windows 8.1 images,

Since Copy Profile doesn't work when you use the sccm capture media to capture a Windows 8.1 image
This is how I been capturing my Windows 8.1 image.
1. Manually sealing the image. Logged in as Administrator, I run, C:\Windows\System32\sysprep\sysprep.exe /generalize /oobe /shutdown /unattend:"C:\Windows\System32\sysprep\sysprep64-81-std.xml" this points to my answer file which contains copy
profile=true. Once Windows is shutdown, I boot directly to PXE, using a TS of the method found in the link below.
2. I then use this method to capture the image directly to a wim file. http://blog.coretech.dk/mip/capture-none-syspreped-image-using-sccm-running-imagex-from-a-ts/
I'd like to hear how others are capturing there Windows 8.1 images, because I am always looking for a better method.

Adding more info:
Deployment Image Servicing and Management (DISM) Command-Line
http://msdn.microsoft.com/en-us/library/jj980032(v=winembedded.81).aspx
Sysprep (Generalize) a Windows installation
http://technet.microsoft.com/en-us/library/hh824938.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can you capture video from the internet, using premiere pro cc?

trying to capture video from the internet, using premiere pro cc, is that possible?
also - it keeps saying "video capture offline" - any solutions for that?

I am going to go out on a limb and say that while it may be against the YouTube terms of service to download or scrape a video off of their service, there are times that I really don't care since it is for my personal use. Providing myself or my wife with entertainment that she can watch or listen to on her smartphone while on an airplane, or in a car traveling down the road, just doesn't bother my moral compass. Doesn't make it twitch in the least.
Perhaps I am wrong. Perhaps I shouldn't do it. Tough. I do, and will continue to do so until the Google police come knocking on my door.
This is pretty much the same argument that they tried to kill the VCR with. The simple act of time shifting was something that was considered wrong, and illegal, until people came to their senses.
As for the editing capability, you might be surprised at the ways it is possible to download video that works just fine for what I use it for. Premiere Pro has no problems allowing me to edit out the parts I don't like, or just aren't funny, and the quality really doesn't suffer much at all.
Now, with the exception of something I did for my two year old Great Niece, I have never used any video that I have downloaded for anything except a tutorial, or in her case, a Sesame Street song I used when I shot video of me reading her the Sesame Street book that I purchased.
Would it be wrong to post downloaded video, intact or edited, for public consumption? Sure it would. No question about it.
But please do not assume that everyone downloading video from the Internet is doing so for nefarious purposes, and I promise not to assume everyone is a perfect angel and is following all the rules.

So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,it takes forever to back up my iPad AND my iPod so what can I do ?

So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?

If you're on windows try the following:
This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
1. Quit itunes
2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
4. press ENTER
5. Reboot your machine
6. Restart itunes & connect device to sync
7. Good luck

FCP3 capturing media for internet use

Similar Messages

Maybe you are looking for