Fcp4 Excessive render time and save time

Excessive render time and save time ...... i mean this can take 2 hours!!! what can be done to fix this? is this normal? what may be the problem? its killing me!! mac g5 duel 1.8 512 meg

More info.
Is it a long sequence?
Is it effects and layer intensive?
How large is your project file after saving?
What are you rendering to/
What are you editing... DV... HD etc.
Render time can vary greatly depending on these and other issues.
As for long saves, is only one project open when you are saving?
When projects get really large they start to take longer and longer to save and become harder to work with.
rh

Similar Messages

  • Read data in real time and save as an excel file

    Hi,
    I want to write a LabVIEW progarmme which able to read data in real time and save it as an excel file from Varian Vacuum muli-gauge.
    It is using RS232 port.
    Can anyone give me some examples or point me in the right direction?
    I am a beginner of LabVIEW. Hope anyone can help me.
    Thank you very much!!
    Joanne

    Thanks for your reply.
    I just use MAX to verify that the rs232 port is operational.
    However, there is an error (please refer to the attachment).
    One possible reason is in MAX I am trying to do the default command *idn? ...but it doesn't work.
    I read the vacuum multi-gauge manual but I don't know which command should I use...
    I attached the manual and can you tell me which command should I use?
    Or can you tell me other possible reason for this error code?
    Thank you very much. 
    Joan
    Attachments:
    Varian Multi-Gauge Controller.pdf ‏2747 KB
    error1.JPG ‏111 KB

  • I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this?

    I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this? I have 4 blocks of Single Choice fields in order for the summary page to give me each day in the final report. But, I need the user to be able to make a selection of any day and time and that apointment to no longer be available to future users when they log in. Plus, when the user clicks on the time, they are unable to change their mind and choose another time. Here's the link if you want to see what I'm talking about: 2015-2016 Workload Apportionment Review

    I'm afraid not.    It's not rocket science but you need to do some coding. 
    You'll need to find a script (php) and save it to your local site folder.  Then reference the script in your form's action attribute like so.
         <form action="path/form-to-email-script.php" >
    The input fields in your HTML form need to exactly match the script variables. 
    I'm  assuming you're hosted on a Linux server which uses PHP code.  Linux servers are also case sensitive, so upper case names are not the same as lower case names.  It's usually best to use all lower case names in your form and script to avoid confusion.
    Related Links:
    Formm@ailer PHP from DB Masters
    http://dbmasters.net/index.php?id=4
    Tectite
    http://www.tectite.com/formmailpage.php
    If this is all a bit beyond your skill set, look at:
    Wufoo.com (on-line form service)
    http://wufoo.com/
    Nancy O.

  • Hide the start time and end time in ESS portal

    Experts,
    We have a requirement to hide the Start time and End time on the header section of the travel request / expense sheet in the ESS portal.  I have searched through the configuration and found several place to hide the start time and end time of segment yet these have no impact on the porta start and end time fields.
    Please Advise.
    Best Regards,
    Martin Weakley

    Hi Martin,
    you can achieve this with administrative personalisation. In portal content navigate to the role where you deltalinked your iView, click "preview". When a new Window for the preview is opened, notice the URL contains "&sap-config-mode=true". Now right click on the fields you want to hide and choose "enter configuration" (or the like, wording is not exact) from the context menue. The WD-UI-Element tree opens where you can directly hide/customize properties of the WD. When clicking save+exist you can also transport the alterations you did.
    maybe this helps or gives you a helpful alternative to the already stated measures in this thread
    regards, Lukas

  • When I use Iphone 4 personal hotspot on USB, it works for a short time and then times out.

    When I use Iphone 4 personal hotspot on USB, it works for a short time and then times out.
    When pinging my iphone directly at 172.20.10.1, while I'm surfing and it times out, the ping shows nothing but "request timed out" .. Sometimes it "comes back" and sometimes I have to reboot my phone or disconnect the USB.. It's always done this and only on USB, it's very frustrating.
    I have packet sniffed also, using Wireshark. When the "timeouts" happen, there's no more data coming from the Iphone. My PC continually sends ARP requests as well and don't get responses.
    Have searched google endlessly and have gotten no where. This has been going on for several months and I'm just getting a bit fed up now.
            Description . . . . . . . . . . . : Apple Mobile Device Ethernet #3
            Physical Address. . . . . . . . . : 42-A6-D9-94-82-9D
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : Yes
            IP Address. . . . . . . . . . . . : 172.20.10.2
            Subnet Mask . . . . . . . . . . . : 255.255.255.240
            Default Gateway . . . . . . . . . : 172.20.10.1
            DHCP Server . . . . . . . . . . . : 172.20.10.1
            DNS Servers . . . . . . . . . . . : 172.16.206.215
                                                172.16.206.215
            Lease Obtained. . . . . . . . . . : Saturday, August 20, 2011 7:38:28 PM
            Lease Expires . . . . . . . . . . : Sunday, August 21, 2011 7:24:04 PM

    I guess if it were me I'd try hotter/longer, then never allow it to Sleep except for the Monitor, & set Processor to Highest Energy Saver>Options tab.
    If you still want a G5, they've been getting cheaper on eBay & such, here's a 1.8 with bad PSU FOR $85+...
    http://www.ebay.com/itm/Apple-PowerMac-G5-1-8-GHz-DP-Dual-Processor-Bad-PS-/1107 15492187#ht_794wt_1398
    But the 2.3s were the most reliable G5s overall...
    http://www.ebay.com/itm/APPLE-POWERMAC-G5-2-3GHZ-DUAL-CORE-8GB-MEM-500GB-SATA-/3 80363233623
    An hour left on this one...
    http://www.ebay.com/itm/Apple-PowerMac-G5-Dual-Core-2-3Ghz-2GB-250GB-Super-Leopa rd-A1177-/160680216830?_trksid=p4340.m185&_trkparms=algo%3DSIC.NPJS%26its%3DI%26 itu%3DUA%26otn%3D5%26pmod%3D380363233623%26ps%3D63%26clkid%3D4264672915595326464 #ht_6431wt_1165

  • ESS Working Time - Start Time  and End Time in Weekly View

    Hello,
    I'm having a problem with the business package ESS - functionality Working Time (cat2).
    I need that information to Start Time and End Time appear in the Weekly View of the portal.
    In Daily View that information are already visible, but In Weekly View that information does not appear.
    Does anyone have any suggestions?
    Thank you very much your attention.
    Att,
    Jair de Oliveira Junior

    Hi Bala
    You can have clock in and clock out in a weekly view.
    you have to change the data entry profile settings.
    In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
    And you can view the weekly entry in clock in and clock out.
    Ravee
    +91.99206.33669

  • I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read.  I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

    I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read.  I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

    I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read.  I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

  • If I have manually set "Start Time" and "Stop Time" for songs, and my hard drive is backed up in Time Machine, when files/songs are transferred on new hard drive, will my "Start Time" "Stop Time" options be there?

    My Macbook Pro will be going in for reimaging and my hard drive will be wiped, I want to know if all my iTunes preferences will be copied if I have backed them up on Time Machine. Specifically, if I have set certain "Start Time" and "Stop Time" for my songs, and I copy my iTunes library, will these "Start Time" and "Stop Time" options remain or will I have to manually set them one by one once again? I need a reply ASAP! Thanks so much!

    As far as I'm aware the start & stop times are stored in the library database, not the media files. If you backup/restore/transfer the whole library then the settings are included. If you create a complete copy of your iTunes folder on another drive you can connect to that copy by holding down option/alt as you start iTunes so you can check that everything is working properly before you send the Macbook away.
    tt2

  • Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

    Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

    Hi Glenn,
    Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
    Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
    Try Solution 2: Clean up cached user login information.
    Please share the results after performing the steps.
    Thanks,
    Atul Saini

  • How to track the login time and logout times of clients

    hai
    please give me the solution
    suppose there are 5 systems connected in LAN.
    how to track the login time and logout times of clients
    for a given time(may be one day or 1 hour) using any programming language.
    please give me the solution

    When the client logs in you write the client's ID and the current time to a database. Likewise when the client logs out. Assuming of course that you have a program that knows when those events occur.

  • Usage dependency is created at Build time and installation time

    Hi,
    The infrastructure guys have selected the usage dependency as Build time and Installation time, while creating software components.
    "Y" SWC is created as depedency for "X" software component.
    In SLD(software catalog),  we are able to view the Y component as dependency in X component(at both build time and installation time).  In usage dependency we are able to view Y component but when we click Y component in usage dependecy we are also able to view X component. Is there any problem with this ?
    There is another issue. we are able to view basis object(in IR) in Y component but not in X component.  Actually as per the above configuration basis object in IR should appear in X component.
    Please refer to another forum which may give you some more idea.("BPM - Message interfaces of one component are not appearing in another comp") pasted on 17 Nov,2006.
    Please could you provide us the inputs.
    Thanks,
    Ramesh

    hi,
    as you see per my weblog try choosing Installation Time
    /people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
    more about it on:
    http://help.sap.com/saphelp_nw04s/helpdata/en/d4/8d784289b4de54e10000000a155106/content.htm
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • In SharePoint Calendar lists, fields [Start Time] and [End Time] do not exist at the Site Column level.

    <header style="box-sizing:border-box;color:#777777;line-height:1;font-size:13px;padding-right:46px;margin-bottom:3px;font-family:'Helvetica Neue', arial, sans-serif;">
    </header>
    I'm doing SP app development and have the following problem.
    I need to check Start time and End Time in SharePoint Calendar using CAML query and then add a new event to Calendar list using the Start time and End Time that user has entered in 2 datapickers
    in the form.
    function AddCalendarListItems() {
    var SD = document.getElementById("datepicker1").value;
    var SThh = document.getElementById("St1").value;
    var STmm = document.getElementById("St2").value;
    var ED = document.getElementById("datepicker2").value;
    var EThh = document.getElementById("Et1").value;
    var ETmm = document.getElementById("Et2").value;
    var T = document.getElementById("Title").value;
    var S1 = SThh;
    SD = SD.slice(6, 10) + "-" + SD.slice(0, 2) + "-" + SD.slice(3, 5) + "T" + SThh + STmm + ":00Z";
    ED = ED.slice(6, 10) + "-" + ED.slice(0, 2) + "-" + ED.slice(3, 5) + "T" + EThh + ETmm + ":00Z";
    //alert("SD= " + SD + " , ED= " + ED);
    var siteUrl = SiteCollurl + "/SharePointApp11";
    var clientContext = new SP.ClientContext(siteUrl);
    var oList = clientContext.get_web().get_lists().getByTitle('Calendar');
    var ListItemCInfo = new SP.ListItemCreationInformation();
    var newEvent = oList.addItem(ListItemCInfo);
    newEvent.set_item("Title", T);
    newEvent.set_item("EventDate", SD);
    newEvent.set_item("EndDate", ED);
    newEvent.update();
    clientContext.executeQueryAsync(Function.createDelegate(this, this.onQueryAddCalendarSucceeded2), Function.createDelegate(this, this.onQueryAddCalendarFailed2));
    function onQueryAddCalendarSucceeded2(sender, args) {
    alert("Success");
    function onQueryAddCalendarFailed2(sender, args) {
    alert('Add new item to the calendar failed. ' + args.get_message() + '\n' + args.get_stackTrace());
    But I receive the following error:
    Add new item to the Calendar failed. Column 'Start time' does not exist. It may have been deleted by another user.
    I've checked and 'Start time' does exist. So it seems in SharePoint Calendar lists, field [Start Time] and [End Time]  exist but do not exist at the Site Column level.
    Please advise.

    Hi Khojasteh,
    Use “EventDate” for Start Time field, and “EndDate” for End Time field. They are the internal name of the two fields, you can check it in the column settings page url like “Field=EndDate”.
    If it isn’t the issue, please debug the code, in which line the error occurs.
    Thanks,
    Qiao
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Qiao Wei
    TechNet Community Support

  • In Material Master Screen,functionally what is Safety time and safety time

    In Material Master Screen,functionally what is Safety time and safety time indicator in the MRP Screen.Pls explain its functionality

    Hi,
    The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
    The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
    Prerequisites
    ·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
    ·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
    ·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
    Regards,
    Vijay

  • I have put my serial number in several times and each time it is invalid now what?

    I have put my serial number in several times and each time it is invalid now what?

    Serial number in what program?
    Are you sure you have a serial number and not a redemption code?
    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
    Serial number and activation chat support (non-CC) may help
    http://helpx.adobe.com/x-productkb/global/service1.html

  • GR Processing Time and Delivery Time not coming in CS11 Output screen

    Hi,
    I am executing a BOM explosion report using CS11.
    In the CS11 report output I added columns for GR Time and Delivery Time using change layout option.
    After changing layout when I see the details in columns of GR Time and Delivery Time all the values are ZERO '0' for all the components in BOM.
    I checked the material master for component items and find that in MRP view values are maintained in GR Time and Planned Delivery Time field which are also seen in MARC table.
    I do not know from where CS11 is fetching the values for display of GR Time and Del. Time.
    How can we populate the values in CS11 report out put for GR Time and Delivery Time? Am I missing some master data maintenance apart from Material Master?
    Regards...

    Hi Prasobh,
    I looked at the note 101262 and it seems that it is suggesting us to create a new Z report by copying existing report and then modify the WRITE Bloack in new report to display GR Time and Del. Time.
    Is my understanding correct? If yes can you share with me the steps in some more details then mentioned in note 101262 that I need to follow for addressing this requirement.
    If no can you suggest any solution that you know by which it is possible to include GR Time and Del. Time in CS11 output without Z development.
    Regards,

Maybe you are looking for