FCP5: Capture ERROR: "FCP was unable to read movie file just captured"

Something I've never had trouble before has just happened: I get the following error message when I try to capture DV footage as soon as it has completed the capture: "FCP was unable to read the movie file just captured" It doesn't matter what length the file is.
I am using a Sony Z1 and have captured hundreds of hours of footage. I tried capturing HDV footage and it works fine. My sequence and capture settings all match what's on tape.
When I try in iMovie HD, it captures DV fine.
I checked software update and there's nothing for me right now. The only thing that has changed on my system is updating to OS 10.5.4 along with the Quicktime and iTunes updates. Could that be the problem? But why does iMovie work fine then?
Any ideas would be mucho appreciado

Forgot to add, if I capture that same HDV tape but downsample it to DV within the camera, it also does not save the captured file. Thanks

Similar Messages

"Error: Final Cut Pro was unable to read the movie file just captured"

Hello everyone!
We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
We reinstalled the Final Cut Pro software all over again thinking that maybe the software got corrupted and we also rectified any disk permissions for the hard drives.
Any ideas?
Thanks
Efrain
G 5 Mac OS X (10.4.8)

We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.< </div>
You eventually want to figure out how that happened and make sure you fix it.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
<
You reformatted the external drive, yes? You might not have used the correct initialization setting. Should be Macintosh HFS, journalling is optional. Or you have a drive formatted for Winderz.
Aside from incorrect drive formatting, we have seen this error if the capture is incomplete or improperly terminated.
It's not an FCP issue, it's hardware.
bogiesan

I purchased a very expensive package, to convert files to PDF form. when it converted some of the text needs to be adjusted how do i fix this? When i e-mailed the file to myself i was unable to read the file??????

Question?? my name is Cecelia. I purchased your product and so far I am very unsatisfied with it. I need to fix or add to a converted PDF and I am unable to do so. I e-mailed this form to my self and it states no file avail.. is this what other will see too??????

First, when you e-mail a PDF you have to be sure the e-mail package you use encodes the PDF as binary file, not all do automatically. If the PDF is sent as an ASCII (text) file, then it will be corrupted. That is likely what happened. The alternative is to zip the PDF and send the zip file.
Fix ups are generally done in the application you used. The PDF should be a duplicate of what you see in your APP. If you are using WORD, be sure the selected printer in WORD is the Adobe PDF printer during your editing. WORD and many other word processors reflow documents based on the attached printer. It is not clear what your problem is, but that might be the issue.
As for forms, are you actually creating an electronic form or is this something that looks form for someone to print and fill in. If you want an electronic form, then you need to use the Form Tools in the tools menu. You can let Acrobat try to guess the form fields that are needed, then go back and edit the form fields. Of course, you may not have actually meant a form as such, but the layout of your document that is messed up. If it is the layout, then attaching the Adobe PDF printer during the editing of your document should solve that issue. You should also consider using the Press or Print job settings to embed all fonts.

ERROR: Final Cut cannot read the file just captured.

I get this message whenever I attempt to capture via DV NTSC using Capture Now.
I have used basic A/V, capture settings.
Please advise.

Perhaps you are capturing to a drive not formatted as Mac OS Extended.
x

Unable to read PDF files created by FTP Adapter

Hi,
I am unable to read pdf files generated by FTP Adapter with its default settings.
Can anybody guide me how to proceed with it. I guess I need to change something in encoding mechanism in FTP Adapter Outbound Connection Pool, but not sure what has to be.
Thanks,
Richa

Hi all,
I have got its solution. I was unable to read .pdf files because FTP adapter was sending the files just by changing the extension from .txt /.xml to .pdf that is the reason that it was not readable.
We had to write an java code to convert .xml file to .pdf file and then paas it to FTP ADapter.
Thanks

Error: File just captured could not be read and was deleted after capture.

I was just recording an extremely important interview. I have recorded literally 10.000 recordings before with the same setup, every day, over a period of some three years now. I'm recorging DV PAL through SDI input on a AJA KONA LS card.
It seemed to be going well last night while recording but as soon as I pressed 'Esc' to end the capture I got an error message saying (not exactly in these words) : Error: The file just captured could not be read.
The file couldn't be found anywhere on the HD or in the trash. Usually when something goes wrong during capture, you can find the file in the capture folder named 'filename-av'. Not this time, I have never seen this error message before.
The person being interviewed was absolutely furious and said he would not do the interview again. So I'm up against the wall here, and need to recover the files.
What's more, the problem still persists. When I try capturing again, as soon as I stop the same error occurs. So now my FCP is not capturing anymore
I tried running Data Rescue 3.1 and found the recording in deleted files, but:
1. the recording is in several parts (not sure if it's all there, but probably most of it)
2. Data Rescue 3 interprets the files as .dv files, as opposed to .mov files as all my other recorded material.
3. THERE IS NO AUDIO IN THE .DV FILES, which pretty much nullifies the file recovery altogether.
I tried googling this error, but it did not help much:
1. None of the people were capturing the same way I do (most were capturing from tape, none straight through KONA SDI input)
2. There was no solution to prevent the error.
3. No solution to recover the files either.
I must say, this experience really taught me the essence of Murphy's law: 'Anything that can go wrong, will go wrong at the worst possible moment'
Any suggestions as to the reasons for this?
Any suggestions as to how the files can be recovered?

Good news!
I beleive I have found the cause and solution. At least now I am able to reproduce the problem at will and therefore, hopefully prevent it.
I discovered that there is nothing wrong with my AJA KONA setup, as I was able to capture with both QuickTime movie capture and Adobe Premier just fine. But every time I try capturing in FCP I get unreadable capture files (since 2 days ago).
Trying all possible capture settings, capture presets or easy setups did nothing. (although capturing thru Firewire still works every time).
I was about to give up when I noticed that where I usually have my video scopes window running, for convenience sake, under it the Voiceover utility was running.
So here is the deal: Usually when you try and capture with the Voiceover utility running, you can't. FCP wont allow you to capture, it will return an error message saying: 'Log and capture can not be opened while Voice Over is running. Please close Voice Over and try again.' As it turns out, this warning is probably for a good reason.
BUT...
If you shut down FCP with Voice Over running and start it up again THEN you CAN run Log and Capture at the same time... everything looks OK, until you stop the recordin, then you get an error message saying your recording is screwed.
I tried this over and over again, every time it behaves the same way. Shutting down with VO util>starting up again>recordings get screwed .. close VO utility>back to normal operation.
I'm not sure if it was the VO utility the last time this happened (few weeks back), but it might very well be. I might not have noticed that the VO utility was running as it was hidden behind the videoscopes and there are no warnings when running Log and Capture if you start up FCP with VO utility still running.
My educated guess to what is going on is that the VO utility is taking up priority over the sound inputs and by doing so making the audio of the capture unreadable. This theory is supported by the fact that when my data recovering experts found the recordings on the HD, there was no audio on the files, but the video was intact.
The only reason setting up the AJA drivers helped in the past was probably because that flushed the FCP settings and in doing so closed the VO utility window. How very ironic
Hope this helps someone out there. And I hope Apple find a way to prevent this from happening.
cheers!
Vidar F.

Error:SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. --- There is an error in XML document (1, 447). --- Input string was not in a correct format.

Hi All,
We have a scenario of FTP-->PI---> Webservice. While triggering the data in the FTP, it is failing in the PI with the below error
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 447). ---> Input string was not in a correct format.
Can you please help?

Hi Raja- It seems to be a data quality issue.
Check for the value @ 1447 position in the xml message that you are trying to send to web service..
may be a date filed/decimal value which is not in expected format.

Unable to Redact or Bates due to Error: There was a problem reading this document (16)

I am using Acrobat Pro X. I have hundreds of account statements where I need to redact and bates stamp. Somehow I keep getting this error: There was a problem reading this document (16)
The files open and print fine. There is no security settings in the PDF that will disalllow me to do this. The next thing I checked to see if they were PDF/A but they were not. Also, I tried Print to PDF but it garbles up the PDF results. Re-scanning them is not a solution for me given the time it would takeme.
Any idea why I would get this error when the PDFs open, save and print ok?

This means there is an internal error in the PDF files, even if they seem to display OK. Contact the document creator.

Error: Unable to read footer file

Hoping someone out there can help me. I get this error on
everypage in my site and have no idea how to stop it.
Error: Unable to read footer file
The error does not show up when I preview inside dreamweaver
but only rears its ugly head after I post the site up on the
internet. I have searched for hours through the Dreamweaver menus
and can not find these elusive footers and have no idea where they
are coming from or what footer file it is trying to read.. Please
help. This probably has a simple solution and I am just not able to
understand it. Thank you.

sdrouillard wrote:
> This probably has a simple solution and I am just not
able to understand
> it.
Possibly, but without a URL we can't comment. Post it, and
we'll see.
At a guess, sounds like an include file is missing. Are you
on some sort of
free hosting plan where the host puts some adverts in the
footer? If that
file is removed from your site directory you might get the
error you've
mentioned (at least, that was the case on the only other time
I've seen this
error)
Regards,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
Derby
UK
Skype ID: acutecomputing

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it fr

Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.

UPDATE: The true error is : '
"itunes was unable to load data class information from sync services"
Any of the topics didnt work.
Sync on my wife's laptop works.

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

Is this on a Windows XP, Vista or 7 system?

Error "PortalSiteMapProvider was unable to fetch current node"

I have a publishing site collection. (SP2010)
Whenever I activate one of my solutions, I get the error “PortalSiteMapProvider was unable to fetch current node, request URL: /_layouts/ManageFeatures.aspx, message: Specified method is not supported., stack trace:
at Microsoft.SharePoint.SPChange.get_InternalListId()” In the ULS log.
When debugging the feature activation, the error shows after all the code is done.
Anyone has a clue what the issue is?.
Ofer Gal

Hi Ofer,
Would you please check out the following link, it described a similar issue:
http://buddhian.blogspot.com/2011/09/portalsitemapprovider-was-unable-to.html
"Resolution
There could be multiple reasons for this, one possible reason is that your application pool account does not have full permissions to read the complete site collection.
Identify your web apps' app pool account using inetmgr
Login to central site administration
Go to Application management > Policy for web application
Choose the web application where the inaccessible site collection exists
Add a full control policy for the app pool account
Possible cause
Derived from resolution :) this could be because portal site map provider uses elevated privileges within its code and when you use elevate privileges it is always the app pool account that is used internally (you may see it as system account on the ui)."
Thanks,
Lhan Han

The server encountered an internal error and was unable to complete your request.

Hello
i am getting this error:
Server Error
The server encountered an internal error and was unable to
complete your request.
Could not connect to JRun Server.
the problem is that when i try to submit for email i am
getting this
the button is supposed to submit a email to ---->

Sometimes a quick trick to try is to do a <CFABORT> on
the first line of code..run it, nothing will happen, then take it
out.. and when you run it again you'll probably get the detailed
diagnostics that'll tell you what it's not happy about.
Otherwise...just progressively comment out code until it
starts working, and you've isolated where the issue is.

Server was unable to read request. RuntimeFaultMessage

Hi, I'm trying to orchestate a .Net web service that receives a String... the String that this .Net web service receives is called "xml" and it represents a xml like this "<rc><ho>hjh</ho><h><h1>hj>/h1><h2>hjh</h2></h></rc>"
When I instantiate the call of this web service through BPEL I get this error:
web_rc_asmx (ReporteRC) (faulted)
[2004/09/22 12:31:04] "{http://schemas.oracle.com/bpel/extension}bindingFault" has been thrown. Less
faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
code: {Client}
summary: {Server was unable to read request. --> There is an error in XML document (3, 114). --> 'Element' is an invalid node type. Line 3, position 114.}
parts: {{}}
The xml string that receives is good because I have tried it directry from the web service page.. or even calling it from an stub/skeleton.. Any idea what could be wrong???
Thanks a lot,
PAOLA LINARES

this is the Bpel file:

<process name="PAOLAPRO" targetNamespace="http://oracle.com" suppressJoinFailure="yes" xmlns:tns="http://oracle.com" xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:bpelx="http://schemas.oracle.com/bpel/extension" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:ns0="http://tempuri.org/">
     
     
     
     
     <partnerLinks>
          
          <partnerLink name="client" partnerLinkType="tns:PAOLAPRO" myRole="PAOLAPROProvider" partnerRole="PAOLAPRORequester"/>
          <partnerLink name="ReporteRC" partnerLinkType="ns0:WSInfRCSoapLink" partnerRole="WSInfRCSoapProvider"/>
     </partnerLinks>
     
     
     
     
     <variables>
          
          <variable name="input" messageType="tns:PAOLAPRORequestMessage"/>
          
          <variable name="output" messageType="tns:PAOLAPROResponseMessage"/>
          <variable messageType="ns0:ReporteRCSoapIn" name="IN_"/>
          <variable messageType="ns0:ReporteRCSoapOut" name="OUT_"/>
     </variables>
     
     
     
     
     
     <sequence name="main">
          
          <receive name="receiveInput" partnerLink="client" portType="tns:PAOLAPRO" operation="initiate" variable="input" createInstance="yes"/>
          
          <scope name="scope-1">
               <sequence>
                    <assign name="assign-1">
                         <copy>
                              <from variable="input" part="payload" query="/tns:PAOLAPRORequest/tns:input">
                              </from>
                              <to variable="IN_" part="parameters" query="/ns0:ReporteRC/ns0:xml"/>
                         </copy>
                    </assign>
                    <invoke name="invoke-1" partnerLink="ReporteRC" portType="ns0:WSInfRCSoap" operation="ReporteRC" inputVariable="IN_" outputVariable="OUT_"/>
               </sequence>
          </scope>
          <invoke name="callbackClient" partnerLink="client" portType="tns:PAOLAPROCallback" operation="onResult" inputVariable="output"/>
     </sequence>
</process>
WSDL file:
<?xml version="1.0"?>
<definitions name="PAOLAPRO"
targetNamespace="http://oracle.com"
xmlns:tns="http://oracle.com"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
>

<types>
<schema attributeFormDefault="qualified"
elementFormDefault="qualified"
targetNamespace="http://oracle.com"
xmlns="http://www.w3.org/2001/XMLSchema"
>
<element name="PAOLAPRORequest">
<complexType>
<sequence>
<element name="input" type="string" />
</sequence>
</complexType>
</element>
<element name="PAOLAPROResponse">
<complexType>
<sequence>
<element name="result" type="string"/>
</sequence>
</complexType>
</element>
</schema>
</types>

<message name="PAOLAPRORequestMessage">
<part name="payload" element="tns:PAOLAPRORequest"/>
</message>
<message name="PAOLAPROResponseMessage">
<part name="payload" element="tns:PAOLAPROResponse"/>
</message>


<portType name="PAOLAPRO">
<operation name="initiate">
<input message="tns:PAOLAPRORequestMessage"/>
</operation>
</portType>

<portType name="PAOLAPROCallback">
<operation name="onResult">
<input message="tns:PAOLAPROResponseMessage"/>
</operation>
</portType>

<plnk:partnerLinkType name="PAOLAPRO">
<plnk:role name="PAOLAPROProvider">
<plnk:portType name="tns:PAOLAPRO"/>
</plnk:role>
<plnk:role name="PAOLAPRORequester">
<plnk:portType name="tns:PAOLAPROCallback"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
WSINFRCWrapper.wsdl:
<?xml version="1.0" encoding="utf-8"?>
<definitions
     targetNamespace="http://tempuri.org/"
     xmlns:tns="http://tempuri.org/"
     xmlns="http://schemas.xmlsoap.org/wsdl/"
     xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
     >
     <import location="http://boinfrcs/wsdcrc/wsinfrc.asmx?WSDL"/>
     <plnk:partnerLinkType name="WSInfRCSoapLink">
          <plnk:role name="WSInfRCSoapProvider">
               <plnk:portType name="tns:WSInfRCSoap" />
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>
This is the XML String:
<RC><registro_control><tipo_llamado asin="false"/><usuario><id_usuario>xxx</id_usuario><clave>yyy</clave></usuario><documento tipo_documento="3988"><id_documento>1234</id_documento><NombreRegistro>solicitud_informacion</NombreRegistro></documento><cliente><nit>860001942-8</nit></cliente><solicitud><id_solicitud>5425</id_solicitud><url_respuesta>http://sevidor:puerto/RaizVirtual/ModuloTransmision/recibirEnvio.asp</url_respuesta><id_usuario_remoto>idUsuario</id_usuario_remoto><clave_usuario_remoto>claveUsuario</clave_usuario_remoto></solicitud></registro_control><Informacion><Dolar>2700</Dolar><Bolivar>1.38</Bolivar></Informacion><Cliente><Id>8913379</Id><TipoId>3</TipoId></Cliente></RC>
and this is the Error:
04/09/28 10:15:34 AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Client
faultString: Server was unable to read request. --> There is an error in XML do
cument (3, 114). --> 'Element' is an invalid node type. Line 3, position 114.
faultActor: null
faultDetail:
04/09/28 10:15:34 Server was unable to read request. --> There is an error in XM
L document (3, 114). --> 'Element' is an invalid node type. Line 3, position 114
04/09/28 10:15:34 at org.apache.axis.message.SOAPFaultBuilder.endElement(S
OAPFaultBuilder.java:135)
04/09/28 10:15:34 at org.apache.axis.encoding.DeserializationContextImpl.e
ndElement(DeserializationContextImpl.java:942)
04/09/28 10:15:34 at org.apache.xerces.parsers.AbstractSAXParser.endElemen
t(Unknown Source)
04/09/28 10:15:34 at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanE
ndElement(Unknown Source)
04/09/28 10:15:34 at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl
$FragmentContentDispatcher.dispatch(Unknown Source)
04/09/28 10:15:34 at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl
.scanDocument(Unknown Source)
04/09/28 10:15:34 at org.apache.xerces.parsers.XML11Configuration.parse(Un
known Source)
04/09/28 10:15:34 at org.apache.xerces.parsers.XML11Configuration.parse(Un
known Source)
04/09/28 10:15:34 at org.apache.xerces.parsers.XMLParser.parse(Unknown Sou
rce)
04/09/28 10:15:34 at org.apache.xerces.parsers.AbstractSAXParser.parse(Unk
nown Source)
04/09/28 10:15:34 at javax.xml.parsers.SAXParser.parse(Unknown Source)
04/09/28 10:15:34 at org.apache.axis.encoding.DeserializationContextImpl.p
arse(DeserializationContextImpl.java:232)
04/09/28 10:15:34 at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.j
ava:547)
04/09/28 10:15:34 at org.apache.axis.Message.getSOAPEnvelope(Message.java:
377)
04/09/28 10:15:34 at org.apache.axis.client.Call.invokeEngine(Call.java:21
72)
04/09/28 10:15:34 at org.apache.axis.client.Call.invoke(Call.java:2138)
04/09/28 10:15:34 at org.apache.axis.client.Call.invoke(Call.java:1308)
04/09/28 10:15:34 at org.apache.wsif.providers.collaxa.axis.WSIFOperation_
ApacheAxis.invokeAXISMessaging(WSIFOperation_ApacheAxis.java:1892)
04/09/28 10:15:34 at org.apache.wsif.providers.collaxa.axis.WSIFOperation_
ApacheAxis.invokeRequestResponseOperation(WSIFOperation_ApacheAxis.java:1451)
04/09/28 10:15:34 at org.apache.wsif.providers.collaxa.axis.WSIFOperation_
ApacheAxis.executeRequestResponseOperation(WSIFOperation_ApacheAxis.java:1022)
04/09/28 10:15:34 at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIF
InvocationHandler.java:306)
04/09/28 10:15:34 at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvo
cationManager.java:250)
04/09/28 10:15:34 at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvo
cationManager.java:133)
04/09/28 10:15:34 at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invok
e(BPELInvokeWMP.java:518)
04/09/28 10:15:34 at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__execu
teStatements(BPELInvokeWMP.java:276)
04/09/28 10:15:34 at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perfo
rm(BPELActivityWMP.java:175)
04/09/28 10:15:34 at com.collaxa.cube.engine.CubeEngine.performActivity(Cu
beEngine.java:3244)
04/09/28 10:15:34 at com.collaxa.cube.engine.CubeEngine.handleWorkItem(Cub
eEngine.java:1664)
04/09/28 10:15:34 at com.collaxa.cube.engine.dispatch.message.instance.Per
formMessageHandler.handleLocal(PerformMessageHandler.java:75)
04/09/28 10:15:34 at com.collaxa.cube.engine.dispatch.DispatchHelper.handl
eLocalMessage(DispatchHelper.java:84)
04/09/28 10:15:34 at com.collaxa.cube.engine.dispatch.DispatchHelper.sendM
emory(DispatchHelper.java:137)
04/09/28 10:15:34 at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEng
ine.java:5318)
04/09/28 10:15:34 at com.collaxa.cube.engine.CubeEngine.createAndInvoke(Cu
beEngine.java:1192)
04/09/28 10:15:34 at com.collaxa.cube.engine.delivery.DeliveryService.hand
leInvoke(DeliveryService.java:480)
04/09/28 10:15:34 at com.collaxa.cube.engine.bean.DeliveryBean.handleInvok
e(DeliveryBean.java:307)
04/09/28 10:15:34 at IDeliveryLocalBean_StatelessSessionBeanWrapper16.hand
leInvoke(IDeliveryLocalBean_StatelessSessionBeanWrapper16.java:1764)
04/09/28 10:15:34 at com.collaxa.cube.engine.dispatch.message.invoke.Invok
eInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:36)
04/09/28 10:15:34 at com.collaxa.cube.engine.dispatch.DispatchHelper.handl
eMessage(DispatchHelper.java:62)
04/09/28 10:15:34 at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.
process(BaseScheduledWorker.java:72)

FCP5: Capture ERROR: "FCP was unable to read movie file just captured"

Similar Messages

Maybe you are looking for