FCP5 has GONE MAD, it WONT QUIT CRASHING.

FCP5 GONE MAD, WONT QUIT CRASHING.
The problem started earlier with a simple "Preview Disable" problem. While trying to fix this a new problem arouse, FCP5 has crashed at every single attempt to do anything with it... Here is a thread that will give you some background information leading to this problem. Jeff Hubbach, "PREVIEW DISABLE; [VTR OK]; read TimeCode and control camera" #6, 12:30pm Oct 17, 2005 CDT
I have run Disk Utility, trashed FCP5 preferences and restarted the computer and I had to force quit the program every time I have opened it today.
What do you? please help

Hello Patric,
The sofware "crash" meaning it locks up (So far what is does is that it shows the loading icon and thats it) I wait just a few minutes, but when I press the Cmd + Option + Esc to force quit, FCP5 reads " Final Cut Pro Is Not Responding" everything on red.
The other things is that even after force quiting, on the dock it still indicates that is open, and when I press the Cmd + tab to navigate through the programs, it still shows FCP as if it was open.
I don't have any network drive mounted. I am using one drive the same that is running the the OS and others...

Similar Messages

We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years) and the screens has gone black and wont turn on. Phone is charged. We have tried force quit- home screen and top button. help pls

We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on. Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer. help pls

FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.

I have just updated OX10.8.5 and mail has gone mad and ^have lost emails

I have just updated my I mac (OSX 10.8.5) and mail has gone mad and I have lost a lot of emails additionally it keeps requesting me to enter my email password..

Launch Mail.
Click Mailbox in the menu bar.
Select "Rebuild" from the drop down.

Iphone5 has gone flat and wont turn back on??

iphone 5 has gone flat and wont turn back on??

I got similar issue today..While restoring IOS 8.3 from itune iphone5 battery got drained and am not able to complete restore . i am not able to start my Phone. It is showing charging but not getting switched on. Please Help...

My JVM has gone mad !

my JVM has gone mad !
Runtime r = Runtime.getRuntime();
          long free = r.freeMemory();
          long total = r.totalMemory();
          long used = total - free;
          System.out.println("total"+total/(1024*1024));
          System.out.println("used"+used/(1024*1024));output :
total 1
used 0
this output is absurd ! bcause by default JVM eats up 64 MB RAM. how can it show total is only 1 MB ?
is my JVM corrupted ?
i want to see my JVM to print 64 MB RAM . how ?

First, try writing:
System.out.println("total"+total/(1024d*1024));
System.out.println("used"+used/(1024d*1024));
it is already in the code . whats wrong with it ?Uh, uh. There are two "d"'s more, so that you can se a floating-point amount of megabytes.
Then...
freeMemory
public long freeMemory()
Returns the amount of free memory in the Java
Java Virtual Machine. Calling the gc method may
result in increasing the value returned by
freeMemory.
Returns:
an approximation to the total amount of
mount of memory currently available for future
allocated objects, measured in bytes.
how much memory JVM consumes when it starts ?Isn't that exactly what your program tells you ?

Spotlight has gone mad...

Spotlight has gone crazy in Snow Leopard...
All day long my MBP has been running hot and the fans have been a spinning.
My main disk name is "Macintosh HD" and my backup disk name is "MBP".
Every time I try to use spotlight I get the "unavailable" message and the barber pole
spins with a message that is something like:
Estimating time for indexing mbp.
Note the lower case. ( mbp is also the name of the mac).
I have told spotlight to ignore "MBP" but that does not appear to be working.
The console log shows many crashes:
8/29/09 7:46:29 PM com.apple.launchd[1] (com.apple.metadata.mds[493]) Job appears to have crashed: Segmentation fault
In desperation I have turned off indexing for the root volume "Macintosh HD".
This has returned some normalcy to the system ( but search can't find anything).
Is this a widespread problem?
Any fixes that allow spotlight to work?
Thanks
Jerry

Hi Jerry.
This does seem to be a widespread problem, and putting your root in the Privacy Pane as you have done is the only fix I've found so far:
http://discussions.apple.com/message.jspa?messageID=10074229#10074229

Battery power consumption has gone mad...!

I have an iphone 5 IOS 7.0.4
Suddenly the battery consumption has gone crazy. The phone feels warm and and 100% of power is used over 4hours with phone in standby.
The power lasts if I turn off mobile data. I have no apps running and location services icon is not showing?
I did find that I have used up all of my icloud storage .. I have resolved this issue now..
There seems to be a hidden process that is using power.. I do not know how to track this down... any suggestions please?

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Sorry to hear that you're having issues with battery performance.
I recommend that you first check what's using battery. Charge the battery full and then use the phone as you normally do. When battery level is low, go to Settings -> Power management -> Battery usage. What does it say here? By tapping the apps/functions in the list you can also se how long they have been active.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Updated itunes has gone mad

Hi, just updated Itunes to newest version and now everytime i click a song or movie or anything itunes strats blasting down the list playing every song/movie for 1 sec then skipping to the next one, what has gone wrong here.
cheers in advance

Hi, just updated Itunes to newest version and now everytime i click a song or movie or anything itunes strats blasting down the list playing every song/movie for 1 sec then skipping to the next one, what has gone wrong here.
cheers in advance

Help my iPad3 ( 64gb wifi+4G ) has gone mad !

As per title , it started to go sluggish while playing Angry Birds Space and now nothing is working properly . Touchscreen is unresponsive even to enter the password . Tried syncing with iTunes but cant enter the password at the prompt ( buttons inactive ) . Tried Home + Enter but cant power off for the same reason . When the screen is on , the Time and Slide to Open buttons appear but have no effect and a set of Audio buttons appear and flash in order ( Stop , Play , Next etc ) at the top .
It has now cooled down ( it was quite warm ) , not connected wirelessly and pressing the Power button the display appears normal but no reaction from buttons. How does one get it going again without access ? Or have I got a dud ?
M

Hi , and Thanks for that . Unfortunately , it made no difference . According to iTunes I have successfully restored the iPad 3 but the problems are :
1) No response from the screen . Slide to Open etc do not work .
2) Audio Controls at the top of the screen appear randomly and flash and alternate with the clock . The Volume slider moves up and down all on its own while each of the other buttons are highlighted one after the other !
3) The few photos on board roll along on a permanent Slideshow .
4) A black bar , the same size as the Slide to Open bar , containing and exclamation mark and the words ' No Sim Card Installed ' has appeared in the middle of the screen . Inserting a Sim card has no effect .
5) Brightness flickers as if its own Slider Control is being moved up and down .
6) Basically , its now a brick . I cant gain access without the screen and cant properly shut it down without the ' Off' slider working !
7) Very disappointing with something < one month old
M~

My iphone has gone off and wont turn back on again

My IPhone 4 has crashed/gone off and it will not turn back on again, how do I fix this and what do I do to fix it???

Here is a support article to help:
IOS RECOVERY MODE RESTORE
Best of luck,
GB

Aperture 3 has gone mad...

I was making adjustments to a photo when the whole computer crashed. Could not even Force Quit. Had to push the button in the back to turn it off. When I restarted and launched Aperture 3, a window popped up telling me there was a problem with the library and that it was going to be rebuilt, and then Aperture would restart. OK. Did not really have a choice here. I let it do it's thing, but now I have this album with the same name scattered all over the place with photos in that should not be there. My projects seems to be in order, but I don't really trust it. I also have some empty albums in the trash that will not delete. Should I restore from my vault or TM?

Personally I would move the damaged Library to another drive and detach that drive to keep that Library just in case, then restore from a vault.
HTH
-Allen

Express wont quit, crashes when saving

I just brought a brand new copy of logic express and installed it without trouble, but whenever I try to save my project on it the I get the spinwheel for a few seconds and then it crashes before the "save options" window can even open. Additionally, if I try to quit before saving logic doesn't register that I pressed quit at all. I've tried updating to the newest version of logic, but the only difference now is that instead of a pinwheel, the screen flashes(like its taking a screen shot) right before crashing. Does anybody have any idea how to fix this?

Hi,
since quitting invokes the save project routine, it's probably the same error.
Questions:
1. Is Logic Express installed in the applications folder?
2. Do you have Admin permissions? Try to repair permissions with the disk utility. This may be part of the problem.
3. What 3rd party software is running on your machine? Try to remove this applications temorarily to make sure they are not involved.
4. Try launching Logic Express from a new created user account and see if the problem persists.
If you still have guarantee on your Mac, call Apple support. That's what friends are for
Fox

My Iphone has gone black and wont turn on, what happened?

my phone was working fine an hour ago, fully charged and everything. Why wont it turn on now ?

Hi lauraaashley88,
Thanks for visiting Apple Support Communities.
If your iPhone wont power on and you've already tried to charge it, see the troubleshooting steps below. In your case I'd suggest starting with step 5.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

KeyChain has gone mad.

hi, help. i have two mac's updated to 10.6, the macBook is doing fine but the MacPro is having issues. Keychain starts up works. (i used to have to type the password in but now it's auto) BUT... about ten mins into work, suddenly it stops working and asks for the password, which it promptly rejects. (yep i know the password) so suddenly i have windows everywhere demanding it.
so far i've fixed permissions (nothing)
first aided keychain (nothing)
killed all the .mac keychain items (nothing)
tried to change the keychains password (rejected)
help... its driving me mad...
cheers
g

Babowa has offered a solution. The reason Apple is not supporting you unless you pay is because you opted to not get AppleCare which would have extended the warranty to 3 years and also provided 3 years of telephone support. Unfortunately you have to get AppleCare within the original 1 year warranty period, let it go beyond that and you are self insuring.
Sorry to hear you dissatisfied though. I think if you spend a little time with Mavericks you will find it stable and accommodating. Is it possible you may need a little more training or education on Mavericks? If so, there are many resources available including Apple Store classes, courses on-line, community colleges and of course books at the local bookstore.

Mouse pointer has gone mad on NB100

Started a download from the iTunes store, came back 30 minutes later to find my mouse pointer jumping erratically in a vertical direction. Had to disable the synaptics pointing device driver and plug in a USB mouse. After rebooting and restarting the mouse driver it appeared to work mostly correctly again until today where it's doing the same thing.
Has anybody else experienced this? I'm coming to the conclusion that the touchpad and keyboard on this device are just very poor indeed.

Hi,
Thanks for your reply. I uninstalled the Synaptic driver and installed the Microsoft one. Still does it, although it is intermittent. When it happens, if I tap the touchpad in the right place it stops. So, it does look like there is something wrong with my touchpad.
Once I back my HD up I am going to revert back to the original factory install. If it still does it then - and I'm fairly sure it will - I guess it's off to Toshiba to get repaired.
I wouldn't mind so much had it not been for the fact that the netbook has had very little use indeed - maybe as little as 100 hours in total as I tend to only use it when on holiday / visiting the parents.

FCP5 has GONE MAD, it WONT QUIT CRASHING.

Similar Messages

Maybe you are looking for