FCP6 any problem using "Render in 8-bit YUV" instead of "Render 10-bt material in high-precision YUV" video processing

I have a long and complex 1080p FCP6 project using ProRes442.  It is made up of mostly high resolution stills and some 1280i video clips.  Rendering has  laways been anightmare.  It takes extremely long and makes frequent mistakes whch have to be re-rendered.   Just today, I discovered the option of selecting  "Render in 8-bit YUV" instead of "Render 10-bt material in high-precision YUV" video processing.  The rendering time is cut down to a fraction and even on a large HD monitor I can tell no difference in quality.  I am getting ready to re-render the entire project in 8-bit and just wanted to check if changing to 8-bit would pose some problems and/or limitations that I'm not aware of.  This is not a broadcast or hollywood film thing. But it does represent my artwork and I burn it to bluray so i do want it to look good.  Lke I said, I can tell no difference between the 8-bit and 10-bit color depth with the naked eye.  Thank you all for all the help you have always given me with my many questions in the past.

Unless you have a 10bit monitor (rare and very expensive) you can not see the difference as your monitor is 8 bit.
10 bit is useful for compositing and color grading. Otherwise, 8 bit it fine for everything else.
x

Similar Messages

  • Render in 8-bit YUV or Render all YUV material in high-precision YUV

    Friends,
    I'm a wedding videographer and I work with the mini dv cams PD150. In a particular work I will have a lot (I mean a LOT) of color correction to do, this way, should I work my sequence with the setting Render in 8-bit YUV or Render all YUV material in high-precision YUV ?
    Thanks again!!!

    I read your commentary:
    "Selecting this option does not add quality to clips captured at 8-bit resolution when output back to video; it simply improves the quality of rendered effects that support 10-bit precision."
    So, 3 Way Color Corrector is a effect that support 10-bit precision? If I use "Render all YUV material in high-precision YUV" will the video look nicer?
    Thanks again

  • Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

    Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?

    If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
    ~Lyssa

  • Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

    Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.

    Hi .
    Apple no longer supports Safari for Windows if that's what you are asking >  Apple apparently kills Windows PC support in Safari 6.0
    Microsoft has not written IE for Safari for many years.

  • Are there any problems using a back cover.

    I want to protect the back of my iPad from scratches. Are there any problems using a skin or cover on the back?

    Is it  ok to cover the back of iPad 2? Won't it affect the cooling system? Coz I don't see any ventilation point and it may be the back metal plate itself which brings out the heat. I purchased a "Targus" back cover from apple store and it fits perfectly and beautifully also very comfortable to handle but I removed it thinking that it might harm., also Apple hasn't introduced any sort of back cover either, only the smart cover for the screen they have, may be coz the back is designed to be open to the air.

  • I have just installed Digital Editions 4.3 but am having poblems downloading digital books as I get an error message stating 'Error! Check Activation'. I have Windows 7 and didn't have any problems using the previous version of Digital Editions. Can anyon

    I have just installed Digital Editions 4.3 but am having poblems downloading digital books as I get an error message stating 'Error! Check Activation'. I have Windows 7 and didn't have any problems using the previous version of Digital Editions. Can anyone advise?

    Hi Siobhan ,
    Please refer to the following link and see if that helps.
    https://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
    I would also like to know ,does that error message has any specific number ?
    Regards
    Sukrit Dhingra

  • Render in high precision YUV

    Hello,
    My FCP (version 6.03) project contains several scenes. Each scene, which is made up of SD PAL clips, resides in its own sequence. I’m rendering each sequence in high precision YUV and nesting all of the sequences together in a new sequence. This parent sequence will be exported to Compressor. Should this parent sequence be rendered in high precision YUV too?
    Thanks in advance

    I'd make them the same...
    Ya know, you don't HAVE to nest these sequences to a master. You can copy and paste the clips from the various scene sequences too... That way you know they are using the renders from the earlier sequences whose settings are exactly the same all the way down the line. But match these sequences exactly as far as all settings go.
    Jerry

  • Any problems using 6' usb to micro usb cable for programming Apple TV

    Tried using configurator to program Apple TV with 6' USB to Micro USB and it would not connect.  Will connect with 3' cable.  Any info?

    Welcome to the Apple Community.
    If you are having problems using the 6' cable, it is because there is an issue with the cable rather than it being 6', USB should be fine up to 15'.

  • Are there any problems using an ipad imported to the UK from korea?

    Are there any problems buying an Ipad in South Korea to use in the UK?

    Me too - its a possible gift and (like most things) iPhones are cheaper in the states than in Canada.  
    I'm assuiming these phones are universal.  But i'd rather know before buying. 
    Thanks

  • Any problem using bseg and bkpf tables

    For fico details i using  bseg  and bkpf  tables.
    I noted that programming is very difficult because of these tables are cluster table.
    plz give me other tables
    if i using these tables any problem will come?

    >
    mysvijai197715 wrote:
    > Hi Aniesh,
    >
    >            BSEG and BKPF are cluster tables. It contains transperant tables like BSIS, BSIK etc. For example to take vendor details usr the BSIK.If you use BSEG and BKPF it will take long time search. suppose your concern having lot of data means may be your server will get shutdown. So use only trasnperant tables like BSIS, BSIK etc.
    >
    >
    > Regards
    > R.Vijai
    Incorrect.  BKPF is a transparent table and not a cluster table and you can use it just like any other transparent table.  BSEG is a cluster table but there is no problem selecting from it so long as you use the key of BUKRS, BELNR, GJAHR - unless you are selecting a very large amount of data, but then this can cause problems when selecting from any type of table.
    The advantage of using BSEG over the other FI line item tables such as BSIS and BSIK is that it holds all the lines of an FI document while the others will hold only a subset eg BSIK will only hold lines that contain a vendor reference and BSAS holds only cleared GL account lines.  Though you can only use it when you have the key.  If you need to search on vendor, you can use BSIK as a starting point, but since I usually need to get hold of all the lines on an FI document, I then have to select from BSEG anyway.

  • Any problems using CSS3PIE?

    I am modifying a template using CSS3PIE and am quite impressed. Just using it for gradients and rounded corners is a huge improvement over large image files. Have any of you had any problems implementing it in you websites?
    The URL is: http://css3pie.com/

    I've not used this one specifically, but I have used .htc workarounds for IE with mixed results. 
    http://alt-web.com/DEMOS/CSS-Rounded-Corners.shtml
    http://alt-web.com/DEMOS/CSS-Shadows.shtml
    Providing your layout is basic and you don't apply different values to each corner of your rounded boxes, it usually works OK.  But there are many situations where .htc workarounds produce unwanted side effects -- the cure sometimes worse than the disease.
    http://css3pie.com/documentation/known-issues/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/

  • Is there any problems using LabView 5.1.1 on Win2K?

    I am currently upgrading the company's system from Win NT 4.0 to Win2K and I am wondering if there is any problems in upgrading LabView to Windows 2000?

    No infact i'm running LV5.1.1 and LabVIEW 6.0.2 on the Win2k system.
    A Rafiq
    National Instruments
    http://www.ni.com/support

  • HT201442 my iphone 5 is saying 'Activation Required' and ive had ios7 since it came out and never had any problems using it. how can i fix this ?

    someone help me fix my phone i have had ios7 since it came out and it has randomly come up with 'Activation Required' never had any problems with the iphone so how do i fix this ?

    Were you, by chance, running a beta version of iOS 7 on your phone?
    If so, this will be the problem. You will need to log Into the private developers forum at https://developer.apple.com/support/ios/
    If you are not a developer, you will need to seek help by way of your favourite search engine.

  • Are there any problems using the Ipad while is is plugged into the wall and charging?

    Are there any contraindications using the Ipad while it is plugged into the wall and charging???

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
     Cheers, Tom

  • MobileMe in system preferences and Airport extreme don't recognize my password. The password and username are correct. I don't have any problem using ICloud and my Apple ID and account

    When I try to connect to MobileMe in system preferences, it keeps saying that my password or username is incorrect. The same problem occurs on idisk.mac.com and when I try to connect to the hard disk connected to my AirPort Extreme. I don't have any problem to access my Apple ID account or ICloud. My password and username are corrected (I have one principal e-mail and two alternatives e-mails in my Apple ID). I don't how to solve it. The biggest problem is that I can't connect to the hard disk on the AirPort Extreme USB entrance and share files and backup. 

    Place the iOS device in Recovery Mode and then connect to your computer and restore to factory settings/new iPod via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

Maybe you are looking for

  • Not Working exportData("filename.xdp")

    Why not working xfa.host.exportData("filename.xdp"); with acrobat Professional Thanks

  • ITunes won't open, different from other problems

    Yeah. I don't have Norton (I do have the windwows firewall and stuff, but I already have it on the allowed list) and I've tried deleting the file. I double click on iTunes (I've even tried from the actual .exe file in the program files) and I get the

  • Maintain Super/Subtype Business Rules

    Headstart Utilities Utility : Maintain Super/Subtype Business Rules Revision : 6.5.1.1 Message : Activity aborted with ORACLE internal errors. -6502 ORA-06502: PL/SQL: numeric or value error Situation : Super-entity, with two sub-entities. Both the s

  • Cisco NAC Guest Server and shellshock

    Hello, We are running NAC server v2.0.2 and would like to know if it's vulnerable to shellshock as the bug report CSCur05629 isn't clear on this. 

  • Trigger an IDOC

    Hi Guys, I am doing the IDOC to File scenario I want to know how to test my scenario and how to trigger an IDOC. Thanks, RameshBabu