FCP7 and Compressor 4 stopped working together
I upgraded OS X to 10.8.5 a few days ago, and ever since FCP7 and Compressor 4 have stopped working together. Any help would be greatly appreciated.
lots of things may work for a while, but will not work indefinitely. Do some searching here for people using h264 quicktimes in fcp. they may work for a while... compressor 3.5 is included with the fcp7 installer so you might want to go back to it.
But first, how were they working together? Were you able to send from within fcp?
Similar Messages
-
My phone doesn't have any cellular phone functions...but it CAN send text messages and access data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, the last two have this problem and the first stopped working all together. I've had new sim cards put in, ive done hard resets on the phone, i've rebooted the phone, done battery pulls, and tech support has reset the signal to my phone. Nothing has worked. (I just "upgraded" <- lol.... and my old phone IS turned off.)
Im in 79707. So to recap my whole case: I upgraded my device using the verizon wireless website. I received my phone and switched my old SIM card from my Droid Razr Maxx HD into the new Galaxy S5. Everything worked fine until the next morning (May 31st) when I woke up and the phone wouldn't turn on. I took the phone to the local Verizon store and they were also unable to turn it on. They issued me a new Galaxy S5 (referred to as phone 2) and switched my SIM card into that one.
With PHONE 2 i was able to make calls and receive calls, along with text and data for approximately four hours. After that, i was unable to use the phone function of the device, but text and data were still functioning. I took PHONE 2 back to the Verizon store where they attempted to hard reset the phone twice, they also installed two new SIM cards at the store. After this they would get the same error, which is the phone just reading "Dialing..." after attempting to make a call. The Verizon associate declared the phone "DOA" and issued me another Galaxy S5 (referred to as PHONE 3).
PHONE 3 worked well, with phone text and data featured intact from when I received it on the after noon of the 31st until approximately 2:30PM on June 1st. I contacted Verizon Tech Support via Gmail phone to attempt the correct the problem. They reset the connection, had me do a battery pull, had me close the "phone" application, and erase the data and catche, then restart the phone. All of which had no effect. My phone is still able to receive texts and use data (even with wifi off) it simply cannot make or take phone calls. all it says is "dialing..." when I attempt to make a call. When other phones call my device it rings once on their end and directs them to voicemail, PHONE 3 does not ring on my end.
I have made sure my old phone is completely powered down. -
Camera and camera roll stopped working
A week after updating to the ios5, my camera and camera roll stopped working. It shuts down as soon as it opens. I have tried to retrieve them from my phone to put on my computer, but my computer no longer recognizes my phone. I DONT want to lose any pictures. Can anyone help please?
I'm having the same problem. I found that if I can get the camera roll to open long enough to select viewing photos by places rather than albums I can access my photos that way. You could then forward them to yourself on another device.
However, I have no clue on how to fix the issue. I've tried resetting my phone (Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo) and restoring my phone to default settings. Neither has helped.
If anyone knows a fix, please let me know. -
Ipad 3 ios5.1 apps categories and top charts stopped working.
Ipad ios 5.1.
Apps categories and top charts stopped working. It this an ipad problem or server problem. The ipad is two days old and all setting are default.
Thanks.Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!
-
User sip folder have manu Mailitem&username&.cache files until folder is full and Lync client stops working.
Hi,
You can try to change the Lync Profile name. After you do it, Lync will create a new Profile. The Lync Profile path is following:
%UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
If the issue persists, please repair Office 2013 and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
I clicked on a bad link, and my safari stopped working,
hi guys I clicked on a bad link, and my safari stopped working,
when I click on safari, appears a phrase,
( SAFARI QUIT UNEXPECTEDLY )
CLICK REOPEN TO OPEN THE APPLICATION AGAIN, THIS REPORT WILL BE SENT TO APPLE AUTOMATICALLY..
when I press the ok or reopen, the screen is frozen and Safari does not open.
please can anyone help me please? thanks....Malware or adware may be the culprit.
If you have a backup browser installed, download and run the AdMedic adware / malware removal tool here > AdwareMedic
Easy and only takes a minute or two.
If you can't download AdwareMedic, follow the instructions here > Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support -
Hello
My system version 10.5.8
I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
"Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
I then tried the following experimental steps:
a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
Guys, please solve the problem
Regards
Ruslan Reed
[email protected]MayaMa --
There are many threads on this. I typed "Uninstalling TastyApps" in the Google search, and came up with these:
http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
I do not know which of the many TastyApps haxies you have. Perhaps it would be better to contact them directly, once you know which of their products you have. -
HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad Suddenly Stops Working
Hi there,
I have an HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 Ultimate 32-bit for more than a couple of years already. During those times up until now, whenever my laptop is on standby for an hour or so, its keyboard and touchpad suddenly stops working, regardless if its running on battery or on AC power.
I always ensure that I have an external mouse in order for me to navigate properly and pull up the on-screen keyboard in order to type once that issue arises.
All appears to be updated in terms of Windows Updates and I even reformatted it, but issue still persists.
Is this particular issue that I am experiencing a harware issue? Perhaps a software issue? Or maybe a defective model itself?
Your prompt response is highly appreciated.
Sincerely,
Led
This question was solved.
View Solution.Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties to resolve Touchpad Issues with your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 or F9 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please download and re-install the touchpad drivers for your Notebook from the HP Support Site
Please Click this Link to find more troubleshooting steps to resolve this issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem. I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
I am in film competition overseas and need to have deliverables in less than a month's time. I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
Any assistance would be greatly appreciated.Still getting software freezes but found a way to mitigate for the mean time.
Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
You will want to highlight Adobe QT32 Server.exe
Right click and select "End Process Tree"
You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
Right-click to "End Process"
No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
Hope this helps until the bug is fixed. -
I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?
Read here:
http://support.apple.com/kb/TS2755 -
I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working
I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
usbccgp Microsoft USB Generic Parent Driver c:\windows\system32\drivers\usbccgp.sys Kernel Driver No Manual Stopped OK Normal No No
usbcir eHome Infrared Receiver (USBCIR) c:\windows\system32\drivers\usbcir.sys Kernel Driver No Manual Stopped OK Normal No No
usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver c:\windows\system32\drivers\usbehci.sys Kernel Driver No Manual Stopped OK Normal No No
usbfilter AMD USB Filter Driver c:\windows\system32\drivers\usbfilter.sys Kernel Driver No Manual Stopped OK Normal No No
usbfltr Razer Copperhead Driver c:\windows\system32\drivers\copperhd.sys Kernel Driver No Manual Stopped OK Ignore No No
usbhub Microsoft USB Standard Hub Driver c:\windows\system32\drivers\usbhub.sys Kernel Driver No Manual Stopped OK Normal No No
usbohci Microsoft USB Open Host Controller Miniport Driver c:\windows\system32\drivers\usbohci.sys Kernel Driver No Manual Stopped OK Normal No No
usbprint Microsoft USB PRINTER Class c:\windows\system32\drivers\usbprint.sys Kernel Driver No Manual Stopped OK Normal No No
usbstor USB Mass Storage Driver c:\windows\system32\drivers\usbstor.sys Kernel Driver No Manual Stopped OK Normal No No
usbuhci Microsoft USB Universal Host Controller Miniport Driver c:\windows\system32\drivers\usbuhci.sys Kernel Driver No Manual Stopped OK Normal No No
uwbusb UWB Bus Control USB-Miniport Driver c:\windows\system32\drivers\usbuwbmini.sys Kernel Driver No Manual Stopped OK Normal No NoDid you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.
-
My Iphone4 Home button sometimes work nicely and sometimes it stop working. India Apple care says they cant give me even paid support because i bought phone from Australia. i don't know what to do. i m disappointed with the product and service support
When you buy an iPhone in the U.S. it's locked to that country with the carrier you bought it for.
If you bought the device unlocked in the U.S. it's unlocked, you can use it on any carrier. Even one's outside the country.
If you want to do a repair on a device you bought in the U.S. and your using it in another country, you must send it back to the U.S. Why? That's where you bought it from.
AppleCare Protection Plans and AppleCare Limited Warranties are registered to your hardware.
Your hardware is your iPhone.
Wherever hardware that was bought then that's the country it was designed to be used in and that's where it was manufactured.
Apple is very localized - if you call U.S. tech support, you'll speak to somone in your country.
So, what does all this mean?
In order to do a repair, you need to send it back to the country you got it from.
And we're all customers like you. We understand that you're upset, but Apple isn't gonna bend the rules to one individual.
Policy is policy. Get over it. -
Hi I have an iPhone 4 and suddenly it stopped working. Could here notifications and nothing on the diisplay. Wake up button on top is not working. so unable to restart the phone. Wanted to try restore from iTunes but Find my iPhone (iCloud) is on. How to recover or restart my Phone
Follow these steps to log into your iCloud account on your computer and deactivate "Find my iPhone" on your device:
Remove an iOS device or Mac on which you can’t turn off Find My iPhone
If you can’t turn off Find My iPhone on the device, turn off the device so it goes offline, then remove it from Find My iPhone on iCloud.com.
Note: You can also remove your iOS device by first erasing it—just follow the instructions below for removing an iOS device you don’t have. You can later restore the device from an iCloud or iTunes backup.
Turn off the device you want to remove.
Sign in to icloud.com/#find on another computer with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, select the offline device, then click Remove from Account. If you don’t see Remove from Account, click All Devices again, then click the Delete button next to the device. If the device comes online again, it will reappear in Find My iPhone. If your device reappears, turn off Find My iPhone on the device (follow the instructions above for removing a device by turning off Find My iPhone), or if it’s an iOS device and you no longer have it, follow the instructions below for removing an iOS device you no longer have.
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.
Note: If you’re trying to erase a family member’s device, that person will need to enter his or her Apple ID password on this device. If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased, and someone else can now activate the device.
copied from: iCloud: Remove your device from Find My iPhone -
Does 2 firewire audio and video interface can work together on FCP ?
hello,
My audio interface is a TC Electronic Konnekt 24D
my video interface is a Canopus ADVC 110
my hard drives are plugged in firewire too
and I use Final Cut Pro 5.0.4
So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
I want to use the voice over tool with the konnekt 24D, so what should I do ?
Does 2 firewire audio and video interface can work together ?
If so, maybe I only have a driver problem from TC Electronic.
But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
thanks
eMac G4 1,25 Ghz Mac OS X (10.3.9)
eMac G4 1,25 Ghz 1 Go RAM DDR Mac OS X (10.3.9)The 1082 does show up as a possible input when I open
the VO tool.
Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
I use my Aja box for export & external monitoring.
All my audio sources run back into the Tascam and I
use the analog mixer in the 1082 to monitor different
sources.
When I view external video, the audio follows it to
keep sync.
that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110) -
Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
SteveNone of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers.
Maybe you are looking for
-
Can not load data into the ods.
When I was trying to load data into BW3.5 from R3 system, I am getting this message "For InfoSource ZSD_A507_011, there is no Hierarchies for master data in source system R3PCLNT300 " any idea. There is no hierarchies for this.
-
Nano Died - Got a New because of Insurance - Computer Not Findng New Nano
My Nano recently died. I had an insurance policy with the retailer. I took my old one in and they gave me a new nano...but, nothing else...no software, etc. Can I use the software I got 5 months ago? If so, what the heck is going on? I can't do anyth
-
Very Slow Copy Operation on HP Pavilion 15 p001tx
Hi everyone. I recently bought the HP Pavilion 15 p001tx. Here are the Specifications if you need them Intel Core i5 4210U 1.7Ghz ,Turbo Boost to 2.4GHz 4 GB DDR3 RAM 1 TB HDD Nvidia Geforce 830M 2GB DDR3 My problem is with extremely slow copying/mov
-
Partial solution for iTunes not playing songs or playing partial songs
Like a lot of other people, my iTunes (latest version 6.0.3.5 as well as previous versions), would refuse to play certain songs, or, would play only the first X seconds of a song. I had been thinking all along that the song was encoded correctly and
-
Mix overview and detail records in same report
Hello, in substance I need to mix results from overview table and records from details table in same report. For creating the scenario: CREATE TABLE ALPHA ALPHA_ID NUMBER, ALPHA_NR NUMBER, ALPHA_TOTCT NUMBER, ALPHA_FUND NUMBER ALTER T