FCP7 Problem rendering crawl titles...

hi folks,
big problems here...
i am trying to create a crawl title that runs smooth (worked fine in FCP6!)...
i also tried "boris title crawl generator". same problem!
seems that FCP doesnt render fields in text generators anymore...
no problems with normal camera-footage...
dont know why... anybody with the same problem?
Is that a new "nice" bug in FCP7?
i am editing DVCAM via firewire connected to Sony DSR-11 --> connected to CRT-Monitor.
sequenz-setting DV 48kHz
thanks

thanks. interesting article but it wont help...
it doesnt matter how long my titles are or how big they are...
in ANY case! FCP7 dont render moving titles with fields anymore.
in FCP6 i could create crawl and roll titles without any problems...
it wont work in FCP7. where is the difference?
please, maybe there is somebody who can try to create a crawl title with FCP7?
let me know if it works for you (or even not!).

Similar Messages

Crawling title stutter

I am using crawling titles, and as they move across the screen, I get an occasional, (not at regular intervals) stutter.
It shows up very slightly within Final Cut Express, a little more in the quicktime movie I export, and even more when it's played back on a DVD burned with iDVD.
(I guess the frame gets bigger each time)
Any clue on how to make it smooth?

Make sure FCE is the only program running, select all clips on your timeline and then render all video and also mixdown all audio. This way you'll correct for anything that might not have been completely rendered. Mixing down audio is also very important - I've seen more dropped frames due to audio not being mixed down than any other cause.
Once you have done that, export your movie to QT as a reference movie, not a self-contained movie. And when you prepare & burn your DVDs, make sure iDVD is the only program running.
If that doesn't fix the problem, you might try re-creating the title clip from scratch and replace the current title clip with a new one (but also make sure you render & mix down again).
The other thing that comes to mind is - how much memory is in your Mac? If it's under 1GB your Mac may be paging memory to disk, which could interrupt the flow enough to cause a problem like this. Also, make sure to turn off any screen saver & that your energy prefs are set to never sleep.

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

Holding the end of a crawling title.

I have a crawling title, but I want the final phrase to stay stationary in the middle of the screen, rather than just disappear at the end. How do I make this happen?
I thought changing ease out to 500 and post roll to 500 would make it slow down, and then pause on the final frame, but instead, if i change post roll to anything, the whole title is just the final frame, and it doesn't display any of the rest of the title.
Chris

Here's a look at the Motion>Position Keyframes for a Title:
Hope that this helps,
Good luck,
Hunt

My mac Mini has problem rendering images and video

THE PROBLEM:
My mac mini has problem rendering JPEG image. There are strips on the images. Other images such as GIF, PNG, TIFF, and BMP are displayed nicely.
The images shown in the links below illustrate the problem:
http://www.flickr.com/photos/terencewong/71481156/
http://www.flickr.com/photos/terencewong/73360989/
(Please note that this image is grabbed from my faulty Mac Mini and saved into TIFF. For uploading purpose, I converted it into JPEG on ANOTHER computer.)
For movies, AVI can be playback without problem. But when it is converted to MPEG, it looks like an untunned TV channel.
FIXES TRIED:
I did erase and install 3 to 4 times using both the install disc and my Tiger Family Pack. All ended up with strips on the JPEG images and the generated MPEG movies.
I've also tried to flash the firmware to 113-xxxxx-124 using ATI's october 2005 universal ROM update, however, the ROM Revision shown in System Profiler is still 113-xxxxx-116 no matter how many time I reboot the system.
INVESTIGATION:
Yesterday, I did some research and got to know that JPEG and MPEG are using DCT (Discrete Cosine Transform) for decompression. And the ATI Radeon 9200 chip provide such a transform on hardware basis, which free the CPU from doing something else. Feel free to point out my inaccuracy.
HARDWARE SPECIFICATION:
I bought the Mac Mini in the last Februray.
The system Boot ROM version is: 4.8.9f1
Display card is ATI Radeon 9200
Chipset Model: ATY,RV280
Revision ID: 0x0001
ROM Revision: 113-xxxxx-116
A POSSIBLE CONCLUSION:
I suspect that it is this part of the chip (the DCT) that is faulty.
Anyone know how to fix this problem?
Many thanks!

Assuming that your display is tightly connected, thus the problem is not caused by something as simple as that, the fact that a full erase and install has not removed the problem would, I think, point to this being a hardware issue, and given that everyone's mini (with the possible exception of some of the latest ones) has the same video chipset as yours, and do not suffer the problem that you appear to, it seems very likely that your mini has a fault which is in need of repair.
If you have an Apple Store nearby, I would take it there to have it checked out - at the very least they should be able to replicate your problem using an in-store display, and if not, thusly suggest it's something external to the mini and concerning your display or something very unusual in the immediate environment of the mini. If you don't have an Apple Store in reach, I'd take the system to an Apple authorized service provider since at the present time it is under warranty.

Having problems rendering

Hello everyone:
OK now I'm having problems rendering. I have about 6m:22sec of video that I need to render. But I get this Render Error:
Insufficient disk space. Free up space with the Render Manager and Retry?
There is no files in the Render Manager Section?
What do I do. The project is on a 1 TB Western Digital Ext Hard Drive with plenty of HD space.
Any help would be great.
This is not my day
Damon

The project is on a 1 TB Western Digital Ext Hard Drive with plenty of HD space.
Fine. But where are the Render files being written to and how much space is on that drive?
Look at your Scratch Disks setting to find out.

Problems with the Title Option in Adobe Premiere

I am having a problem with this option because when it shows the title panel, it is very incomplete; it doesn't have as many option as it had before, such as color or shape options. It started happening when I tried to blur our somebody and pick an hoxigonal shape from the panel and a sign showed up saying that there was a problem and then the program would shut down and wouldn't open later on unless I restarted the computer. Now, it opening without any problem but the title panel is still very basic.

What the other users have said is correct. Premiere captures through FireWire or through SDI/HDMI via a 3rd party solution.
For your situation I would say the best bet is to connect you camera to your computer via USB or use a card reader and copy the entire directory to your hard drive and ingest into Premiere via Media Browser.
If you Google 'how to make stop motion in premiere pro' there are tons of great tutorials.
Best,
Peter Garaway
Adobe
Premiere Pro

Crawling Title Very de-interlaced

Hi all.
Well, I am not sure if I am using the correct tool for the job. I filmed my child’s choir recently and one of the songs they sing is the renowned Dr Seuss Grandmas Killer Fruit cake. Sending this across continents the exact wording will get lost so I wanted use a crawl title and show the words as they were sung.
Well, after a little repositioning etc I was able to do it and felt really good about my newly found PRE 8 skills. Well, once I exported this to a WMV 1080i 30 to preview on my XBOX 360, the title is almost unreadable. It has very bad interlace, or deinterlaced lines running horizontally.
Is there a trcik to make these better ?
The source video is 1920X1080 30P from a Canon HF21 shot in MXP. The video looks stunning.
For the title, I went to Title -> New Title and selected Default Crawl.
Thanks

You may also get better results if you just burn a BluRay disc and play it on that xBox.
WMVs can be highly compressed files, designed to be viewed on computers, not TVs. It's quite possible that WMV format is what's causing the interlacing.

Mac Pro has problems rendering and RAM previewing in Adobe AE

I've been using Adobe After Effects 7 and I have a 3g new Mac Pro. It's a great computer, really fast with Final Cut Studio Universal, etc. and when rendering sequences in FCP the program doesn't quit. BUT, when I'm trying to RAM preview or render a composition in Adobe After Effects the application will quit unexpectedly everytime. I found that it would only quit when the composition was over approx. 30seconds, but I've used an eMac that never had problems rendering much longer clips. The fact that the program quits after a certain amount of time makes me think it is an issue with RAM availability to the program, as in a conflict with the program, and the new intel-based Mac Pro. I've asked around on the Adobe website but there is no specific solution. Has anyone heard talk that the intel-based Macs or new OSX, are conflicting with Adobe applications, etc?

Mostly correct, Jim. Photoshop CS3 (UB) Beta is available for download and a time-limited license to CS2 license-holders. The time-limit is unspecified, but Adobe says it will end when CS3 is released.
All good reports the last time I checked on various fora.
(CS3 install does not overwrite CS2, so in case Adobe releases CS3 and pulls the plug on those time-limited CS3 Beta licenses, you'll still have CS2 to limp along with until you receive 3.)
CS2 seems to work fine on an Intel Mac, though slower because it's running in Rosetta. Heck, I'm using CS without difficulty, other than the slowness.
However, all that doesn't help the OP with AE, which isn't scheduled for a UB release until mid-2007, IIRC.

Problems sending mail-titles of Billing docs to the same Sold-to-party

Problems with mail-titles in sending Billing documents to the same Sold-to-party.
If we send, by using VF04, different Invoices to the same Sold-to-party, we expect in the mail-title not always the last Invoice (XVBRK-VBELN).
Mail-title: Invoice &XVBRK-VBELN& (your ref. &VBRK-BSTNK_VF&)
In transaction SOST we see:
Invoice 900014179 (your ref.)
Invoice 900014179 (your ref.)
The result should be:
Invoice 900014178 (your ref.)
Invoice 900014179 (your ref.)
How can we solve this problem ....

Hello,
You have this problem sending via external mail? If yes, had collegue with same problem & as I understand here's what was done to solve:
-- in output condition master set dispatch to be via scheduled job (previously had been immed) -- trans VV31 or VV32
-- set up the job itself -- trans VF31
I've not tested myself, but maybe you could try in your dev system to see if it works. Good luck

Perplexing Problem with Boris Title Crawl

This has been an ongoing problem that occurs whenever I use Boris Title Crawl to create very simple titles (i.e lower third, scolling titles, etc). Within the HD sequence, the titles work as intended, but when I down convert the sequence or export the sequence containing the titles to a QT file (whether via QT conversion or compressor) this is where I get the problems. Titles which were once centered become right justified or visa versa. It doesn't occur with all of the titles and there seems to be no recognizable pattern. Sometimes the title will flip back and forth between centered and justified. Sometimes I go back into the sequence and re-edit the title. This may solve it, but then another title will be effected. This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.

*This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.*
Not an answer to your question... I've never used Boris title crawl. But a suggestion that might save you time when trouble shooting... You can just export the title sequence at the end of your show as a test to verify if it's working properly rather than exporting the whole thing only to find you still have an issue.
rh

Problems with "crawl" option in titles

I'm doing some editing on a video that requires I have large amounts of text crawl across the bottom of the screen. I have selected "crawl" under "type" and selected "Start off screen" and "End off screen". Unfortunately, when I go to write more than a few words the curser does not follow the text past the text box I've created on screen. Any text written past this amount does not scroll after I've rendered the file. Has anyone else had this problem and know a fix?

NM guys, I figured out a fix. I changed my "X position" to something obscenely large and that seems to have fixed things. Hope this helps someone else out with the same issue.

Kdenlive not rendering with title clip

After doing a system upgrade kdelive will no longer render my project, which rendered fine before the upgrade. After I click render, it either gets stuck in "waiting" or it gives an error saying that rendering crashed. If I turn off the title clip, rendering proceeds as normal. Looking around I saw some people with similar problems fixing it by running kdenlive as root, but in my case that didn't solve anything. Anyone have any ideas?
The kdenlive profile I'm using is HD 1080p 59.94fps and I'm trying to render an H.264 video (although trying other formats encounters the same problem).
Some relevant package info:
[root@labby ~]# pacman -Qs kdenlive
local/kdenlive 0.9.6-2
A non-linear video editor for Linux
[root@labby ~]#
[root@labby ~]# pacman -Qs ffmpeg
local/ffmpeg 1:2.1.1-1
Complete and free Internet live audio and video broadcasting solution
local/gstreamer0.10-ffmpeg 0.10.13-1 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
[root@labby ~]#
[root@labby ~]# pacman -Qs mlt
local/mlt 0.9.0-5
An open source multimedia framework

Have you upgraded the system?
I had this same problem until yesterday, only kdenlive did not render at all, with or without title clip. Googling about it, I think it was some kind of conflict with mlt and opencv. Opening kdenlive as root did not work for me. I initially downgraded to the previous version of mlt (0.9.0.1 if I remember cforrectly); with that I could render, but only without title clips present. Solution came with last update of opencv (and re-upgrade of mlt).
Also, while I was looking up this problem, I read about a similar bug being related to the sound, and installed ladspa (just in case all the previous doesn't completely solve your problem).
Last edited by Daerun (2013-07-14 13:52:30)

Resolution problems - rendering?

I'm using iMovie to cut a project. The titling and photos and I think videos are coming out really poor in terms of resolution. In the Preview when I choose which style of title, the resolution is crisp. Then I drag it in to the time line, it plays back really poorly (therefor don't think it's screen resolution).
I firewired an iMovie project from a coworker that has a new MacBook directly on to my computer. It was fine on his, then on mine, again, the resolution was horrible.
I'm not sure if a rendering setting is set to something because my last couple computers have all had poor resolution when it comes to iMovie projects. Can anyone give advice?
I just bought this computer MacBook Pro last week.

Since apparently my pictures seem to have disappeared:
zoom_400.jpeg:
zoom_600.jpeg:
So I assume it is an Acrobat problem then. Still strange though that is also appeared in the RIP (does Acrobat use the same PDF library or engine as the APPE to render PDF's)?
Thanks for the feedback BTW!

Kdenlive fail rendering if title clips or images are in the project

Hi.
Thats what happen if I try to render a project with title clips or images inserted, whatever is the output that I choose. If I hide title clips and images, the project renders
I get a popup that says
Rendering of /home/pathtooutputfile aborted, resulting video will probably be corrupted
And what I see in the error log is a little different with the output I chose:
If I choose mp4 I get
[libmp3lame @ 0xb0510e20]
Channel layout not specified
[mp4 @ 0xb050ae40]
Encoder did not produce proper pts, making some up.
If mpeg2
Channel layout not specified
[mpeg @ 0xb050ae40]
VBV buffer size not set, muxing may fail
If vob
Channel layout not specified
[ac3_fixed @ 0xb0510e60]
No channel layout specified. The encoder will guess the layout, but it might be incorrect.
If mov
[mov @ 0xb050ae40]
Encoder did not produce proper pts, making some up.
I'm going crazy (a month ago everything worked fine).
Any suggestions?
I search and found this http://www.kdenlive.org/forum/rendering … lip?page=2 but no way (and I don't know if it is my issue)
(my english is not so good... sorry)
Thanksssssss

Have you upgraded the system?
I had this same problem until yesterday, only kdenlive did not render at all, with or without title clip. Googling about it, I think it was some kind of conflict with mlt and opencv. Opening kdenlive as root did not work for me. I initially downgraded to the previous version of mlt (0.9.0.1 if I remember cforrectly); with that I could render, but only without title clips present. Solution came with last update of opencv (and re-upgrade of mlt).
Also, while I was looking up this problem, I read about a similar bug being related to the sound, and installed ladspa (just in case all the previous doesn't completely solve your problem).
Last edited by Daerun (2013-07-14 13:52:30)

FCP7 Problem rendering crawl titles...

Similar Messages

Maybe you are looking for