FCP7 with snow leopard - choppy playback in monitor

Ive been fine running fcp6 with a jvc 1080 hd monitor connect via DVI from my MBP duo intel 2.4 (4 gigs ram)
its not the fastest setup but its been fine.
ive noticed my playback into my monitor is always choppy now since upgrade to fcp7 and snow lep. i have it set as DIGITAL CINEMA DESKTOP PREVIEW- FULL SCREEN, when i set displays to mirror and use DIGITAL CINEMA DESKTOP PREVIEW - MAIN it plays smooth and normal. any ideas?

I am finding actually, that playback is smoother when moving my cursor along the timeline when a simply zoom in on the timeline. Does that make sense to you guys?

Similar Messages

Colors not consistent with Snow Leopard 10.6 on an Eizo SX2761W monitor

I am unable to get any color consistency with Snow Leopard 10.6 on my Eizo SX2761W display.
Most of the actual "content" (i.e. images, videos, websites, etc.) is displayed very saturated and dark, much more saturated and dark than in 10.5.8. I presume that's because of Snow Leopard's new gamma value. The problem is, all of OS X's GUI elements, like the dock, icons and color labels in the finder, title bar buttons, etc. are not displayed in the same manner. These elements are all very desaturated, pale and grayish. NoMachine NX sessions running in X11 (via Rosetta) also have this desaturated look in Snow Leopard.
Here's a screenshot comparison I put together, that shows those color inconsistencies using the example of Mozilla's Firefox logo on the web in Safari, on the web in an NX session and as an icon in the Finder and in the Dock:
http://dl.getdropbox.com/u/7276/SnowLeopard-ColorsAndContrast.png (1 MB)
As far as I could test it, I get these color/contrast discrepancies only on the Eizo SX2761W monitor. I checked this on a classic Mac Pro and a late Mac mini with the same results. On a MacBook and its internal display Snow Leopard's colors seem consistent.
I tried to recalibrate the SX2761W profile, I tried out all the other standard color profiles available in Snow Leopard, I tried to copy my old profiles over from a Leopard backup, but I was unable to get rid of the display inconsistencies. After a whole day of trying and tinkering I went back to 10.5.8 to get a consistent color environment back.
Any ideas what's causing this and more importantly what to do about it? I have to say I'm at my wits end. The only thing I can think of is mailing this issue to Apple in the hope there will be a point release in the not too distant future that fixes the problem.

I have what I assume is the same problem. It just started today on my DELL WFP2407 - but remains even when switching to my MacBook Pro's built in screen.
The Dock, Safari, the desktop background - and probably other colour managed applications; all show very pale blue hues with over saturated red. Blue goes towards purple and other colours get muddled and pale. Oddly the Finder displays colours correctly on icons, but not the dock. I took a screenshot of Finder's Safari icon next to The Dock's:
http://www.nuxx.dk/hosting/paledock.png
- Clearly showing significant inconsistency... I just updated to 10.6.1 which didn't change anything.
Needless to say I tried calibrating a new colour profile to no effect, and seeing as the finder itself renders things just fine I'm not sure that's where the issue lies.
This is a huge problem for me, I hope there is a simple solution.
Message was edited by: nuxxie

Mac Pro will not boot with Snow Leopard - need help!

I have had a lot of issues with Snow Leopard since I upgraded from 10.5.8. Most of my problems started after installing Office 2007. I finally wiped the hard drive and reinstalled everything. No problems until last week. Start up was taking longer and had to reboot a couple of times because of grey screen. So I would just put computer to sleep. Yesterday the computer was frozen on screen saver with scrambled rows of pixels on screen two and the main monitor had a frozen image.
I initially pulled all peripherals out and pulled the power plug for 5 minutes. I have left the peripherals out and pulled the second monitor as well. I tried pulling the power plug during a few more starts but nothing gets me to a complete start up screen.
I have tried resetting PRAM and VRAM and tried a safe boot. I tried booting from Snow Leopard and my Leopard disk stayed on either a blue or gray screen with spinning beach ball (on gray screen).
Put original install disk in and booted from using D to check the hardware. Good news is that the hardware test was OK. I did the extended test.
All different kind of start up problems.
- Some start with start up sound goes to Apple logo to blue screen to grey screen with beachball
- Some start ups with no initial sound then Apple logo to blue screen to grey screen with no cursor or beachball
- Some start ups with no sound to gray screen to blue screen to grey screen.
I have no problem wiping the HD1 again but I can't even get the OS disk to be recognized with holding the C key during start up. This last time it went to a blue screen (holding the C key) and a cursor.
I don't know what else to do - Please help!!!

There are lists (MacIntouch and MacFixit) of hardware / software support issues with 10.6. Accelerateyourmac is another place to watch.
There were some really long threads back in Sept about printer driver support.
The 7300 firmware was more about Windows support; those cards are failing and dropping like flies (how DO they know 3 yrs has expired anyway?) and they don't support SL features like OpenCL etc so I'd invest in ATI 4870, best graphic card and works in all models Mac Pro.
Lots and lots of bootable clones for backup. Never need to wipe and install again.

SmoothCam: FCP7 or Snow Leopard or QTX or combo to blame?

I have done several searches on the topic but It is not clear as to the specific root of the jitter issue - I read several users with OS 10.5+ are OK with FCP7 so it appears that the problem is SL/QTX??? Does SmoothCam in FCP6 work OK with SL? My reason for the concern is that I may soon be updating from a PPC G5 to a new MacPro that would obviously come with Snow Leopard. I am considering running it on OS 10.5.8 with FCP6 (my current combo) to retain SmoothCam. I have no need/want to upgrade to FCP7.
Thoughts?
Thanks in advance.

If there is a jitter issue in Smoothcam on FCP 7 there will be a jitter issue with Smoothcam on FCP 6. There was no real change in the smoothcam filter's code from 6 to 7. It is important to know that if you plan on getting a new MacPro to replace your ageing G5 Quad core you will not be able to take full advantage of the MacPro multithreading & multicore perfomance enhancements with out FCP 7. Since the new Final Cut Studio is designed to take full advantage of the Intel's Quadcore performance in the Lastest MacPro's that Final Cut Studio 2 is not. Although FCS 2 is designed to be capatable with the Intel Processors it does not take full advantage of the Intels perfromance enhancements.

Brand new 27" iMac with Snow Leopard has constant hard disk activity

I just purchased a new 27" iMac which was an upgrade for my 24" with Leopard. I have used my older machine for a good year and not noticed any hard drive activity when idle.
Now on the new machine with Snow Leopard I constantly get hard disk activty every few seconds.
This will happen from:
1) Restart
2) leaving at login screen
3) loggin in and not running anything.
4) Computer screen in sleep mode.
5) well, all the time really.
I have looked at the activity monitor and can see spikes every 5-10 seconds.
I have turned off all processes possible, watched processes for CPU spikes, etc to no avail.
Is anyone else having the same problem and if so can they suggest a fix? I originally thought it may be something writing to a log every so often but I have no idea what and how to find it.
Using iStat just confirms the activity.
Hope you can help as this is driving me mad!
Message was edited by: RedDwarfUK

RedDwarfUK wrote:
I havent really installed much as well. Here are the list of programs I have installed.
Adium
Firefox
New icons
app cleaner
skype
spotify
chicken of the VNC
GoToMeeting
Cisco VPN Client
Xmarks for safari and firefox
I would start by checking each of these items, making sure you have the latest versions of each & that they are compatible with Snow Leopard. Do the same for any Firefox extensions or any plugins associated with any of these applications. In particular, chicken of the VNC hasn't been updated since 2006 & what little compatibility info I can find for it suggests it supports only Tiger (10.4) & 10.3.9. The Download Xmarks page indicates that it is beta software.
Also note that some of these items may do more than just run as applications. On first run or install, some might install startup or login items, or preference panels that remain in effect even when the application is not running. Check /Library/StartupItems & /System/Library/StartupItems -- both are empty by default, so anything you find in them is suspect. Likewise, check the System Preferences > Accounts > Login Items tab. Anything you find in them that does not appear to come from Apple (like iTunes helper) is suspect. Also check the "Other" category of System Preferences.

FC Studio 2 compatible with Snow Leopard?

H there,
I am in the process of buying a new computer, upgrading from a G4. I use Final Cot Studio 2 (with FCP6) and wonder, if this is compatible with snow leopard. I tired to find an answer on this, but a lot of people seemed to have problems when they install snow leopard. In my case, it would be installing Final Cut from the CD's and them upgrading to the latest version. Ideally, I would like to wait and not buy FCP7 yet. Can anyone advice me on the compatibility?
Many thanks,
Anita

From what I've read, it is important to install FCP 6 and all updates from the original install discs over a clean install of SL.
Problems seem to arise with upgrade installs.
Hope this helps.

New Macs not shipping with Snow Leopard?

I just bought 2 Mac Minis for media playback use; I ordered them on 9/9 and figured they'd come with Snow Leopard (the Apple Store has a "ships with Snow Leopard" banner at the upper right, even).
However, they both shipped with 10.5.6 installed, and a DVD in the box also with 10.5.6 - no sign of Snow Leopard.
Any ideas on what's the best way to get this remedied? Visit a store, or phone support? I just spent 10 minutes clicking around support.apple.com but it kept sending me in circles.

daviangel wrote:
Yes this is one of the many reasons Apple customer support is usually rated #1 because they will usually quickly resolve things like this.
Ha
I called support -- they did help me out, but it went like this
Me: Hi, I just ordered 2 Mac Minis, they said they'd come with Snow Leopard but when they arrived they had only Leopard
Support: do you have the Mac on right now?
Me: No, not now, but I do have serial numbers and order number
Support: Oh. Because a couple people have complained about that, and I was able to help them click on the Apple menu and say About This Mac and see that the version number was 10.6.
Me: Er, no, I'm not that [must... resist... urge... to... say... "clueless"...] ... hasty. I'm quite positive that the preinstalled version, and the only DVD in the box, was 10.5.6.
Support: Oh. I'm sorry. Well, have you heard about our up-to-date program? [http://www.apple.com/macosx/uptodate>
Me: Yes, but I'm not interested in paying $20 for stuff that was supposed to come with what I already ordered.
Support: It's not $20, it's $9.95.
Me: Right. And I need two of them. Sorry I was off by 10 cents, but I'm not interested in paying anything at all for this, actually.
Support: OK, let me look into this.
... long pause
Support: OK, and you've checked the entire box, and the version number, and it's not 10.6.
Me: Yup, quite carefully, a number of times now.
and then some more pauses, confirmations that I did check the installed versions, and apologies for the slip up, and they're sending me the upgrade.
So, in general, helpful, though this whole thing has been an extra set of hassles I wasn't expecting... Fight Club had it right, "the things you own end up owning you".

Belkin n52te Speedpad with Snow Leopard

Several folks have posted threads (now archived) asking how to get a n52te to work with Snow Leopard, but did not get responses. Here is how I got mine to work on my late 2010 Mac Pro (running with the 32-bit kernel (64-bit does not work for me)).
Install the belkin driver (v1.04) from the CD (the website has an older version). You'll probably get the error that at the kernel file did not install right. Reboot per instructions.
After rebooting, check to see if the file n52te.kext is installed in system/library/extensions. If not, get a copy from the installer (n52te Editor.pkg) and manually copy there. (Right click on the installer to Show Package Contents, copy the file Archive.pax.gz to your HD, expand this file, expand the folders, then move the n52te.kext file to system/library/extensions.) Reboot.
Open the prefpane "n52te editor" and go to the Device tab. You will probably get the message "n52te not connected". That means that the process "n52teHelper" is not loaded. Manually reinstall the prefpane "n52te Editor.prefPane" by getting a copy from the installer (n52te Editor.pkg) again. Right click on the installer to Show Package Contents, copy the file Archive.pax.gz to your HD, expand this file, expand the folders, then double-click the file "n52te Editor.prefPane" in the archive. If you open activity monitor, you should see the process n52teHelper and this process should run at boot-up (check your accounts log-in items). You might have to reboot again. Now the n52te works and is configurable.
If you want to run with the 64-bit kernel, configure the n52te booted in 32-bit kernel and reboot for the 64-bit kernel. The n52te works (except for application autoswitching) but you cannot edit the configuration. To edit, boot back into 32-bit kernel or use virtualization and run the windows version of the editor (I can use Parallels 6 running XP). Both options work for me.

I'm afraid you a working with a lost cause.
Have you considered getting a Logitech G13? They cost about $65. They do have drivers for 10.6
Nobody here can upload any file (there's no upload function on this forum or a place to upload it to). All any user can do from this site is to point you at a download link that might exist somewhere on the Internet. A simple Google search for your device drivers for Mac comes up with just more problems with no solutions, and you should know by now that Belkin dropped development for your device back in 2009. Nobody on this site has ever gotten the device to work properly for several years.
Belkins' site only had drivers for 10.4 and 10.5 and they were a beta (test) version. I'd say that Razer has abandoned this product. There were reports that the firmware update conflicted with the 10.5.6 update and there's no reason it won't get broken with any system update we get from Apple in the future.
Razer (the company that designed the product that Belkin made) shows the n52te as a "Legacy" product so it doesn't appear they will be working with the drivers any longer. Their newer "Nostromo" device (also made by Belkin) doesn't have any Mac drivers at all...
With 10.7 on the way in the future, I wouldn't care to put buggy trickly installation junk in my OS. It will be very difficult to trouble shoot any problems the drivers might have or cause, and create problems or become totally useless whenever you have any system updates.
I'd be looking to sell that device to a windows user and buy a device that's fully compatible with the current Mac OS. If you really have to use the product then your best solution would be to use Bootcamp and install Windows on your Mac, use the device on a PC, or get an old Mac that will run Tiger.

FCP X is just as tetchy with Snow Leopard as it is with Lion

I did a clean install of Snow Leopard on one of my internal drives.
Now I have the choice of Lion or Snow Leopard to run FCP X (installed it on both).
So far, I can see no improvement at all with FCP X on SL.
Can anybody suggest an operation that runs better with Snow Leopard?
Andy

For some reason FCPX runs much better with Snow than Lion on my old Mac Pro. If I understand your question right, rendering is faster, it opens faster, there is no stuttering and I always use playback: High Quality, it never crashes. And I have no memory leak, on the contrary FCPX only uses 4-5 GB. I have another volume with Lion and FCPX and an can clearly see the difference when I switch. But I have no clue what is going on. Maybe my computer likes Snow better.

I use FCP 7 Studio on an iMac with Snow Leopard. If I upgrade to Lion so I can use iCloud, can I still use FCP 7?

I use FCP 7 Studio on an iMac with Snow Leopard (10.6.8). If I upgrade to Lion so I can use iCloud, can I still use FCP 7?

Thanks X! I use Office 2011 as this iMac is only a year old. I don't have Rosetta (is it an add-on?) at least, I've never seen it... so... you're saying I could upgrade to Lion with no ill effect to my FCP7 Studio and all it's files and my saved projects?
z

HP 1312nfi Multi-funtion printer & brand new Macbook Pro with Snow Leopard

Hi,
I just got my Macbook Pro with Snow Leopard May 2010. I can only print and fax with my 1 year old HP 1312nfi color laserjet multi-function printer. I cannot SCAN at all. I tried loading the software that came with the printer but it wouldn't install the 'Print Director' as I had on my old iMac (with Leopard). Then I went to HP and it said not to install the software that came with the HP printer because Snow Leopard has it all. I read that there are 3 ways to scan from my computer which none of them work. I brought up the printer then clicked printer setup and when I try to bring up the 'print utility' from the last tab, it won't open anything. Where is the printer utility now? Why can't I scan? There has to be a way. HELP please?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

Dear Nathan,
Many thanks. To the best of my memory, that is how I got where I am today. Initially I had one failed setup, then discovered compatibility mode and ran using it. The result was not an obvious failure, but something was not there because not only were some drivers missing (wi-fi, trackpad, ...) but (much to my disappointment) the 3.1 update would not run. It complained that 3.0 wasn't there. If I hardwired to my home network, the machine would do almost everything I wanted, but the graphics were slow and clumsy. That is when I hunted around for the NVidia driver and downloaded it from NVidia. And that is where I stand now.
My son found this link http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/
which has instructions claiming to do the install straight to Win 7 without using compatibility mode.
Given that my clumsy efforts to patch things up have probably necessitated a Win 7 deinstall and reinstall to test either your plan or the one my son found, I am inclined to sit tight for a couple of days to see how much I can learn.
I appreciate your interest in this problem, and if you are up for reading the process at the link my son found and commenting, I would be grateful.
In any case, many thanks, Paul

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

FCP7 with snow leopard - choppy playback in monitor

Similar Messages

Maybe you are looking for