FCPIO_TIMEOUT with ESXi 5.1 and 1.5.0.45 fnic driver
Hi,
we have a lot of trouble with a new setup. Brought a new open-e storage server with Qlogic HBAs into our fabric (nexus 55xx) connected this through zoning into our B200M3 with 2.1.2a and 2.1.3a BIOS and running ESXi 5.1 Update 1b on top.
After the reboot, no connected host sees any LUN from this device any more.
Only a reboot of the open-e server recovers the luns. When the device was properly rebootet, all hosts had immediatly access to the luns.
While rebooting a host, we got this messages:
vmkernel.log:2014-08-21T15:42:07.882+02:00 vmkernel cpu18:8210)<7>fnic : 4 :: abts cmpl recd. id 236 status FCPIO_TIMEOUT
vmkernel.log-2014-08-21T15:42:07.882+02:00 vmkernel cpu14:600697)<7>fnic : 4 :: Returning from abort cmd type 2 FAILED
vmkernel.log-2014-08-21T15:42:14.477+02:00 vmkernel cpu0:600785)<7>fnic : 4 :: Abort Cmd called FCID 0x10300, LUN 0x3 TAG f2
flags 3
vmkernel.log-2014-08-21T15:42:14.487+02:00 vmkernel cpu10:601534)<7>fnic : 4 :: Abort Cmd called FCID 0x10300, LUN 0x3 TAG f3
flags 3
vmkernel.log:2014-08-21T15:42:16.491+02:00 vmkernel cpu18:8210)<7>fnic : 4 :: abts cmpl recd. id 242 status FCPIO_TIMEOUT
vmkernel.log-2014-08-21T15:42:16.491+02:00 vmkernel cpu0:600785)<7>fnic : 4 :: Returning from abort cmd type 2 FAILED
vmkernel.log-2014-08-21T15:42:16.491+02:00 vmkernel cpu8:8840)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP device "
eui.3564333930626263" state in doubt; requested fast path state update...
vmkernel.log-2014-08-21T15:42:16.491+02:00 vmkernel cpu8:8840)ScsiDeviceIO: 2331: Cmd(0x4124003d20c0) 0x1a, CmdSN 0xaae9 from
world 0 to dev "eui.3564333930626263" failed H:0x8 D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0.
vmkernel.log-2014-08-21T15:42:16.491+02:00 vmkernel cpu0:9278)WARNING: ScsiDeviceIO: 7370: READ CAPACITY on device "eui.35643
33930626263" from Plugin "NMP" failed. I/O error
vmkernel.log-2014-08-21T15:42:16.491+02:00 vmkernel cpu0:9278)FSS: 4972: No FS driver claimed device 'eui.3564333930626263:1'
: Not supported
vmkernel.log-2014-08-21T15:42:16.492+02:00 vmkernel cpu2:601289)VisorFSRam: 752: inode 4773189553399820288
vmkernel.log-2014-08-21T15:42:16.492+02:00 vmkernel cpu2:601289)VisorFSRam: 770: ramdisk snmptraps
vmkernel.log-2014-08-21T15:42:16.492+02:00 vmkernel cpu2:601289)VisorFSRam: 911: for ramdisk snmptraps
vmkernel.log-2014-08-21T15:42:16.493+02:00 vmkernel cpu0:9278)VC: 1591: Device rescan time 361264 msec (total number of devic
es 14)
vmkernel.log-2014-08-21T15:42:16.493+02:00 vmkernel cpu0:9278)VC: 1594: Filesystem probe time 901243 msec (devices probed 14
of 14)
vmkernel.log:2014-08-21T15:42:16.501+02:00 vmkernel cpu18:8210)<7>fnic : 4 :: abts cmpl recd. id 243 status FCPIO_TIMEOUT
vmkernel.log-2014-08-21T15:42:16.501+02:00 vmkernel cpu10:601534)<7>fnic : 4 :: Returning from abort cmd type 2 FAILED
vmkernel.log-2014-08-21T15:42:17.487+02:00 vmkernel cpu14:600697)<7>fnic : 4 :: Abort Cmd called FCID 0x10300, LUN 0x0 TAG f5
flags 3
Talking to VMware, they gave me a KB article:
kb.vmware.com/kb/1033409
But we`ve already installed this drivers:
net-enic 2.1.2.38-1OEM.500.0.0.472560
scsi-fnic 1.5.0.45-1OEM.500.0.0.472560
Any help would be appriciated. Especially with troubleshooting SAN/traffic on nexus, fabric-interconnect and maybe the blades itself....
Thx!
Update: 22.08.14
What we can see now is, using a host with 4 vHBAs has problems. Not only with open-e. But also with another storage vendor.
Example the hosts sees after a reboot only 2 (of 4) paths into 4 of 5 luns. On one lun he sees (again) all 4.
Hosts having only two vHBAs, not connected to open-e, seems not having trouble.
Guess would be, there musst be some kind of trouble with the driver?
Hi wdey,
yeah that is another problem with this "matrix"-only thing....
It`s just a plain old intel x86 server hw from a well know manufactorer running open-e as so called "software definded storage" on it. The connection is done via plain old very well known QLA2562, 8 GBit Dualport HBAs. Them connected to our N5K.
Your question answered:
Regarding 4 hba configuration
- I assume your UCS FI is end host mode, and the N5k NPIV ?
YES
- do you have a dual fabric, with different VSAN's
YES
- do you see the flogi of all the 4 vhba's (show flogi database vsan ... on the N5k)
Only two vHBAs are connected to the N5K fabric but YES, see them all there.
And of course see them in our second non-N5K fabric. Also different VSAN`s then N5K
- did you see any strange error messages on UCS, resp. N5K
NO, none so far. Thats the thing. Not even error-counters etc.rising.
And thanks for your help!!!
Similar Messages
-
I have a 2008 MacBook with OX10.9.5 and has 160 GB in Hard Drive. Can I expand this in order to Storage more photos and music..?
Yes, any 2.5" dia SATA HDD will be compatible. The largest are 2 TB at the present time> Here is a selection from OWC:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
There are other vendors as well.
You will need a #00 Phillips and a #6 Torx drivers to install the HDD.
Ciao. -
hi
its a long and sorry story, i have a imac running mavericks
a few days ago i noticed that the dvd drive was ejecting every disc i put in, so i decide to check hd with onyx and reset permissions etc
onyx said the smart status couldnt be checked and i should check hd using disk utility.
i did this and it came up that hd had errors , so i ran the repair facility....it came up with disk can not be repaired, reformat and reinstall mavericks
this i did.
i reinstalled mavericks into mac hd, which took about 3 hrs, i then rebooted and a folder with flashing Qmark appeared, i cant get past this at all.
i have tried to use internet recovery but it comes up with 6002f error, and the dvd drive still does not accept boot disk, so i am at a lose as to how to proceed
anybody got any ideas?
thanks
LIf your hard drive has SMART errors then it is failing and should be replaced. Disk Utility cannot fix SMART reported errors.
-
Issues with my USB HDD and can't uninstall the USB driver
Hi I have an external HDD USB 3.0 that when I plug in, windows detects it, but doesn't show in Computer
when I try to see it in device manager it shows as detected, but when I try to uninstall it the process just hangs there doing nothing
tried viewing the HDD with Disk Management, but that hangs and doesn't show a thing, just keeps saying contacting virtual disk service
I'm using Windows 7 ultimate service pack 1 64 bit with the latest updates
this started when I had to use a driver uninstaller for AMD and the HDD was connected, and I had to reinstall my USB driver while the HDD was connected through the whole process
my motherboard is a Z77X-D3H from Gigabyte if that helpsMy guess is you corrupted the data on the HDD. Windows has no capability to compensate for this type of problem. This is not a "hardware compatibility" problem. You already know the HDD worked until your incident with the driver.
Why would you be using an uninstaller for AMD on an Intel based MB? That just does not sound right. There are no AMD drivers on the Gigabyte website for your MB.
I suggest you find a computer repair shop and have them look at your situation.
Your problem is not really in the scope of this forum and it is not Windows fault your HDD is now messed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Problems with a Powermac G4 and OS9
Hi I'm new to the forum and new to Macs so please excuse me if my questions seem a little dumb.
I've just obtained a PowerMac G4 with OS9 that used to belong to a school. The school wiped out all their work but I'm wondering if they've also wiped off something else as I'm having problems getting it to boot.
If I turn the machine on I get an Apple icon then about a minute later I get a prohibitive sign.
The only way to get the machine to boot is to put in the Install CD and power up while holding the 'C' key. Then the system boots up ok and I can abort the install.
My first guess was that perhaps it was trying to boot from a network, so I made sure that the hard drive was the drive to boot from. That made no difference so I ran a repair on the drive but that was to no avail.
Any ideas what the problem could be?
There doesn't seem to be any applications or anything worthwhile keeping on the machine so perhaps it may be easier to reload OS9, if that's the case will I need to input some sort of product key.(is that the correct phrase?)
Problem is I don't know my product key, is it possible to look into the system and find it?
Edit Forgot to mention I have the System Install and System Restore CD's that originally came with the machine.
Message was edited by: B0BA123Hi, Bob -
From the info you have given, your machine is the G4 (AGP) model, the second model in the early G4 machine series (the first model was the G4 (PCI) machine).
Boot ROM version $0003.22f1
Yes, you should update the firmware before installing OSX. You can download the applicable updater from a link on this page -
Article #86117 - Firmware Updates
or directly from this page -
Article #120068 - G4 Firmware Update 4.2.8
Note that the machine must be booted to OS 9.1 or later (but not OSX) on a writeable local drive in order to install the firmware update. This means it must be booted using an OS 9.1, 9.2.1, or 9.2.2 which has been installed on the hard drive. In addition, the firmware updater itself must be on the same hard drive.
If OS 9 (9.1 or later) is currently available on the drive, you can use it to install the firmware update. If it is not, you will need to install it. The original disk set that came with that machine may have been for OS 8.6, but more commonly is for OS 9.0.x.
If the disk set you have is for OS 8.6, you will need to acquire the use of a retail OS 9.0.4 or later Install CD, install that and update it (via download updater) to OS 9.1.
If the disk set you got with it is for OS 9.0.x, install that and update it to OS 9.1 using the download update for OS 9.1. The updater for OS 9.1 is designed to install on top of any previous version of OS 9.
You can download the update for OS 9.1 from this page -
Article #75103 - Mac OS 9.1 - Download and Info
Since your Software Install CD is in the International English version, be sure to download the OS 9.1 update in that same version; a different language version, such as North American English, will not install on top of the one you have.
In any case, once you have installed the firmware update you can wipe the drive to get rid of OS 9, and then install OSX. The installation of the firmware update changes some of the coding on one or more chips on the main logic board, and is not residual on the hard drive - wiping the hard drive will not undo a firmware update.
You can then install OSX.
Once the Boot Rom has been upgraded will the machine be able to take a straight OSX load or will it have to be OS9 and OSX ?
You can install OSX directly without needing to have OS 9 on there.
Built in memory 320Mb RAM
You have sufficient RAM for installing and using OSX 10.4.x. However, since OSX likes a lot of RAM, you should consider adding more RAM. I would recommend at least 256MB more; 512MB would be better. For reference, that machine can hold 2.0GB (2048MB) of RAM in the form of four 512MB modules.
Macs of the vintage of your machine can use only RAM designed for Macs - be sure the place you get it from is savvy to that. Things to look for from vendors of RAM - a no-cost return policy; and a lifetime warranty.
Suggestions re OSX:
Try to keep at least 5GB of drive capacity unused after OSX and programs have been installed, and documents created. OSX needs that space to use as a memory swap file, for use in its automatic on-the-fly defragmenting routines, and for other purposes.
You can reduce the amount of space the installation of OSX will need. Its default install will install all language versions of that version regardless of your intended usage. You can alter that via a Custom install, choosing only those languages (or just the one language) you will be using. This can reduce the drive space consumed by the installation considerably.
If in the future you find that you need additional drive space, you can replace the internal drive with a larger one; and/or add a second internal drive (that model is pre-equipped to accept a second internal drive); and/or add firewire drives as needed. The max drive size that will be recognized on the internal bus is 128GB; larger drives can be used, but only 128GB will be 'seen'. This 128GB limit does not apply to firewire drives, nor to USB drives (that machine's internal USB is v. 1.1; hence, USB hard drives are generally too slow for use other than as archiving volumes).
The G4 (AGP) model you have is one of the best models of the early G4s (the only better of those is probably the G4 (DA) model). If you find you need more speed, you can get processor upgrades for it from 3rd-party sources; as I recall, one such vendor offered a dual 1.8GHz processor upgrade for it (though this may have changed). -
Is it possible to install ESXi 5.5 on a PC I5 3770K with windows 7, 64bits and motherboard asus Z77 ?
Hi(Bonjour)!
Here's the follow up:
I took a chance and installed MAC OS X 10.4.9 COMBO and QT 7.1.6 update, installed FCS 2 suite and my old TRV 340 still works perfectly.
I erased livetype included with FCE HD as suggested by apple tech note, and the installing process worked like a charm.
I keep my version of FCE HD 3.5.1 and original soundtrack . Both applications work well side by side with FCP 6.
Great.
Michel Boissonneault -
Raid management on UCS 210M2 with ESXI 4.1
Hi there,
I'm trying to figure out what is the best way to monitor the raid on an 210M2 with the megaraid card. Currently I have install ESXI 4.1 with a windows 7 worksation. On this workstation I have install the MSM but of course you can only see the raid of that workstation... What I've read on the LSI doc is that you need to install some kind of "drivers" on the esxi console to be able to monitor the whole raid... But with the limited options in the console shell of esxi, ( no rpm ), its impossible to install that driver ...
The question is how its possible to use MSM with ESXI 4.1 to monitor/manage the raid of the ucs210m2 ?
I've install the esxi 4.1 cisco iso
regardsHello,
Based on what I have read, we do not need to install anything on ESXi hosts. MSM works with ESXi through CIM provider.
Refer to section .6.5.4.1 in the LSI doc. Also, here is the KB article from LSI
http://kb.lsi.com/KnowledgebaseArticle16430.aspx
Make sure the requried network ports are open between the system running MSM and ESXi host.
HTH
Padma -
Compatibility between ESXi 5.1 and Dell PowerVault TL2000 (PCI-E SAS HBA 6Gbps Dual Port)
Hello Folks,
I have the following environment:
2 PowerEdge R720 Servers with ESXi 5.1 OS
15 VM's (Win2008 64x R2) in one of R720 Servers
Replication method is vRanger 6.0.2 with VA in Both ESXi Servers
I would like to use a PowerVault TL2000 (LTO5) to backup user files of VM's, but I need to install this device on ESXi 5.1 Server and access it from VM's. Dell has informed this is not supported by them, so I would like if anybody has the similar environment and if it works.
The connection Card that will be used is PCI-E SAS HBA 6Gbps Dual Port and Backup software is Symantec Backup Exec Server Express Essentials 2012
Thank you for any information!
Br,
EdneyHi Is your issue resolved, I'm facing the same problem, I can see the Tape Library in VMWare, however there are 2 paths and only 1 of them is active, the other one is dead.....
-
Disable LRO with ESXi 5 environment?
Hi All,
I have a question regarding building UC on UCS using a C210M2 rackmount server with ESXi 5 installed.
I am trying to find out if I still need to disable LRO.
I think that I do but my colleague seems quite sure we would only need to disable LRO if in a Vmware 4.0 or 4.1 environment.
Can anyone please help me out with an answer?
I have proveded a link below which I am using as my reference on the issue.
Thanks for any help.
Regards
Amanda
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CA526319_00_cucm-on-virtualized-servers_chapter_00.html#CUCM_RF_L7C7DA14_00Good News.
Doc wiki was updated in April; VOS\RHEL 5+ supports LRO. CUCM 8.6+ UCCX 9.0+
http://docwiki.cisco.com/wiki/Disable_LRO
Note: If you're running CUCM 8.6, UCCX/ IP IVR 9.0 and above (i.e., UC applications using VOS/ RHEL 5+), the Linux version used in these releases is compatible with LRO, you don't have to worry about the settings (disable LRO is not required) on the host or which version of ESXi is running. However, Disabling LRO is required for CUCM including other UC applications such as UCCX/ IP IVR, etc. versions 8.0 and 8.5 (prior to VOS/RHEL 5.0) irrespective of ESXi version.
http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX#Unified_CCX_or_IPIVR-Specific_Information_for_OVA_Templates -
Customer/Vendor A/C with line item details and with opening and closing Bal
Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balancesHello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah -
I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.
I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014 -
Printing Issues with HP OfficeJet 100 and Windows 8.1
We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.
Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Corrupted video with Linux 3.8 and i915
Ever since I upgraded my Linux Kernel to 3.8, I've been getting corrupted graphics after booting. I can get past the corruption if I add "nomodeset" kernel option, however this causes X to use a fallback driver instead of the Intel one.
This is the dmesg logs with the default modesetting and corrupted graphics:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 13 09:01:47 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bad8bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad8c000-0x00000000badd5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000badd6000-0x00000000badddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000badde000-0x00000000baddefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baddf000-0x00000000bae00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae01000-0x00000000bae01fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bae02000-0x00000000bae11fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae12000-0x00000000bae1ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae20000-0x00000000bae44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae45000-0x00000000bae87fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae88000-0x00000000baffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000e00fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fe407fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed93fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: BIOSTAR Group H61MGC/H61MGC, BIOS 4.6.4 01/19/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 43FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbae02 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcd80-0x000fcd8f] mapped at [ffff8800000fcd80]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbae01fff]
[ 0.000000] [mem 0x00000000-0xbadfffff] page 2M
[ 0.000000] [mem 0xbae00000-0xbae01fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbae01fff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x43fdfffff]
[ 0.000000] [mem 0x100000000-0x43fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x43fdfffff @ [mem 0xbad7e000-0xbad8bfff]
[ 0.000000] RAMDISK: [mem 0x37982000-0x37cb8fff]
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000badd6068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000baddcfe0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000badd6150 06E89 (v02 ALASKA A M I 00000014 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bae17f80 00040
[ 0.000000] ACPI: APIC 00000000baddd0d8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000baddd150 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000baddd258 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000baddd298 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASPT 00000000baddd2d0 00034 (v07 ALASKA PerfTune 01072009 AMI 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43fdfffff]
[ 0.000000] NODE_DATA [mem 0x43fdfb000-0x43fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f400000-ffff88043f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xbad8bfff]
[ 0.000000] node 0: [mem 0xbae01000-0xbae01fff]
[ 0.000000] node 0: [mem 0x100000000-0x43fdfffff]
[ 0.000000] On node 0 totalpages: 4171547
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11879 pages used for memmap
[ 0.000000] DMA32 zone: 748326 pages, LIFO batch:31
[ 0.000000] Normal zone: 53240 pages used for memmap
[ 0.000000] Normal zone: 3354120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000bad8c000 - 00000000badd6000
[ 0.000000] PM: Registered nosave memory: 00000000badd6000 - 00000000badde000
[ 0.000000] PM: Registered nosave memory: 00000000badde000 - 00000000baddf000
[ 0.000000] PM: Registered nosave memory: 00000000baddf000 - 00000000bae01000
[ 0.000000] PM: Registered nosave memory: 00000000bae02000 - 00000000bae12000
[ 0.000000] PM: Registered nosave memory: 00000000bae12000 - 00000000bae20000
[ 0.000000] PM: Registered nosave memory: 00000000bae20000 - 00000000bae45000
[ 0.000000] PM: Registered nosave memory: 00000000bae45000 - 00000000bae88000
[ 0.000000] PM: Registered nosave memory: 00000000bae88000 - 00000000bb000000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0100000
[ 0.000000] PM: Registered nosave memory: 00000000e0100000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fe408000
[ 0.000000] PM: Registered nosave memory: 00000000fe408000 - 00000000fe800000
[ 0.000000] PM: Registered nosave memory: 00000000fe800000 - 00000000fea00000
[ 0.000000] PM: Registered nosave memory: 00000000fea00000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fed94000
[ 0.000000] PM: Registered nosave memory: 00000000fed94000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xcfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043fa00000 s85184 r8192 d21312 u524288
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4106358
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16342728k/17823744k available (4908k kernel code, 1137556k absent, 343460k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3392.088 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6786.85 BogoMIPS (lpj=11306960)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000027] AppArmor: AppArmor disabled by boot time parameter
[ 0.000680] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003594] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004879] Mount-cache hash table entries: 256
[ 0.004996] Initializing cgroup subsys cpuacct
[ 0.004998] Initializing cgroup subsys memory
[ 0.005003] Initializing cgroup subsys devices
[ 0.005004] Initializing cgroup subsys freezer
[ 0.005005] Initializing cgroup subsys net_cls
[ 0.005006] Initializing cgroup subsys blkio
[ 0.005023] CPU: Physical Processor ID: 0
[ 0.005024] CPU: Processor Core ID: 0
[ 0.005027] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005289] mce: CPU supports 9 MCE banks
[ 0.005298] CPU0: Thermal monitoring enabled (TM1)
[ 0.005305] process: using mwait in idle threads
[ 0.005308] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.005431] Freeing SMP alternatives: 20k freed
[ 0.006105] ACPI: Core revision 20121018
[ 0.007846] ftrace: allocating 19310 entries in 76 pages
[ 0.014700] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047607] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.047612] TSC deadline timer enabled
[ 0.047615] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.047619] ... version: 3
[ 0.047620] ... bit width: 48
[ 0.047620] ... generic registers: 8
[ 0.047621] ... value mask: 0000ffffffffffff
[ 0.047622] ... max period: 000000007fffffff
[ 0.047622] ... fixed-purpose events: 3
[ 0.047623] ... event mask: 00000007000000ff
[ 0.084381] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.070954] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.124713] Brought up 4 CPUs
[ 0.124716] smpboot: Total of 4 processors activated (27147.40 BogoMIPS)
[ 0.127034] devtmpfs: initialized
[ 0.128242] PM: Registering ACPI NVS region [mem 0xbad8c000-0xbadd5fff] (303104 bytes)
[ 0.128247] PM: Registering ACPI NVS region [mem 0xbadde000-0xbaddefff] (4096 bytes)
[ 0.128248] PM: Registering ACPI NVS region [mem 0xbae12000-0xbae1ffff] (57344 bytes)
[ 0.128249] PM: Registering ACPI NVS region [mem 0xbae45000-0xbae87fff] (274432 bytes)
[ 0.128713] RTC time: 12:28:08, date: 04/21/13
[ 0.128739] NET: Registered protocol family 16
[ 0.128821] ACPI: bus type pci registered
[ 0.128858] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.128860] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.134043] PCI: Using configuration type 1 for base access
[ 0.134456] bio: create slab <bio-0> at 0
[ 0.134491] ACPI: Added _OSI(Module Device)
[ 0.134492] ACPI: Added _OSI(Processor Device)
[ 0.134492] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.134493] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.135068] ACPI: EC: Look up EC in DSDT
[ 0.135781] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.137166] ACPI: SSDT 00000000bae16c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.137329] ACPI: Dynamic OEM Table Load:
[ 0.137331] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.137344] ACPI: SSDT 00000000bae17e18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.137479] ACPI: Dynamic OEM Table Load:
[ 0.137480] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.137815] ACPI: Interpreter enabled
[ 0.137817] ACPI: (supports S0 S1 S4 S5)
[ 0.137825] ACPI: Using IOAPIC for interrupt routing
[ 0.137957] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.140373] ACPI: No dock devices found.
[ 0.140376] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.140460] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.140461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.140644] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.140660] PCI host bridge to bus 0000:00
[ 0.140662] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.140663] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.140664] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.140666] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.140667] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.140668] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.140669] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.140670] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff]
[ 0.140676] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.140703] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
[ 0.140710] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.140714] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.140717] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.140761] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.140782] pci 0000:00:16.0: reg 10: [mem 0xfe407000-0xfe40700f 64bit]
[ 0.140852] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.140882] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.140901] pci 0000:00:1a.0: reg 10: [mem 0xfe406000-0xfe4063ff]
[ 0.140986] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.141009] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.141022] pci 0000:00:1b.0: reg 10: [mem 0xfe400000-0xfe403fff 64bit]
[ 0.141084] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.141106] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.141179] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.141202] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.141274] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.141305] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.141327] pci 0000:00:1d.0: reg 10: [mem 0xfe405000-0xfe4053ff]
[ 0.141412] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.141435] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.141547] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a
[ 0.141560] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
[ 0.141566] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
[ 0.141573] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
[ 0.141580] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
[ 0.141587] pci 0000:00:1f.2: reg 20: [io 0xf0d0-0xf0df]
[ 0.141594] pci 0000:00:1f.2: reg 24: [io 0xf0c0-0xf0cf]
[ 0.141635] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.141648] pci 0000:00:1f.3: reg 10: [mem 0xfe404000-0xfe4040ff 64bit]
[ 0.141666] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.141696] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[ 0.141709] pci 0000:00:1f.5: reg 10: [io 0xf0b0-0xf0b7]
[ 0.141716] pci 0000:00:1f.5: reg 14: [io 0xf0a0-0xf0a3]
[ 0.141723] pci 0000:00:1f.5: reg 18: [io 0xf090-0xf097]
[ 0.141730] pci 0000:00:1f.5: reg 1c: [io 0xf080-0xf083]
[ 0.141737] pci 0000:00:1f.5: reg 20: [io 0xf070-0xf07f]
[ 0.141743] pci 0000:00:1f.5: reg 24: [io 0xf060-0xf06f]
[ 0.141821] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.141889] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.141908] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.141941] pci 0000:02:00.0: reg 18: [mem 0xe0004000-0xe0004fff 64bit pref]
[ 0.141961] pci 0000:02:00.0: reg 20: [mem 0xe0000000-0xe0003fff 64bit pref]
[ 0.142050] pci 0000:02:00.0: supports D1 D2
[ 0.142051] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.147998] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.148003] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.148013] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.148056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.148071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.148131] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.148233] pci0000:00: ACPI _OSC control (0x19) granted
[ 0.148555] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.148580] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.148604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.148627] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.148651] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.148675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.148699] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.148724] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.148771] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.148772] vgaarb: loaded
[ 0.148773] vgaarb: bridge control possible 0000:00:02.0
[ 0.148791] PCI: Using ACPI for IRQ routing
[ 0.150239] PCI: pci_cache_line_size set to 64 bytes
[ 0.150274] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.150275] e820: reserve RAM buffer [mem 0xbad8c000-0xbbffffff]
[ 0.150276] e820: reserve RAM buffer [mem 0xbae02000-0xbbffffff]
[ 0.150277] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
[ 0.150330] NetLabel: Initializing
[ 0.150330] NetLabel: domain hash size = 128
[ 0.150331] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.150338] NetLabel: unlabeled traffic allowed by default
[ 0.150351] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.150354] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.152358] Switching to clocksource hpet
[ 0.154978] pnp: PnP ACPI init
[ 0.154986] ACPI: bus type pnp registered
[ 0.155052] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.155054] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.155055] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.155056] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.155057] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.155060] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155126] system 00:01: [io 0x0a00-0x0a0f] has been reserved
[ 0.155127] system 00:01: [io 0x0a30-0x0a3f] has been reserved
[ 0.155128] system 00:01: [io 0x0a20-0x0a2f] has been reserved
[ 0.155130] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.155242] pnp 00:02: [dma 0 disabled]
[ 0.155272] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.155473] pnp 00:03: [dma 0 disabled]
[ 0.155550] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.155556] pnp 00:04: [dma 4]
[ 0.155565] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.155584] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.155595] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.155622] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.155624] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.155639] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.155737] system 00:09: [io 0x0400-0x0453] has been reserved
[ 0.155738] system 00:09: [io 0x0458-0x047f] has been reserved
[ 0.155740] system 00:09: [io 0x1180-0x119f] has been reserved
[ 0.155741] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.155742] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.155744] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.155745] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.155746] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.155748] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155778] system 00:0a: [io 0x0454-0x0457] has been reserved
[ 0.155779] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.155841] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.155914] pnp: PnP ACPI: found 12 devices
[ 0.155915] ACPI: ACPI bus type pnp unregistered
[ 0.161646] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.161657] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.161660] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.161666] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.161686] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.161687] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.161688] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.161689] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.161690] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.161692] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.161693] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff]
[ 0.161694] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.161695] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.161711] NET: Registered protocol family 2
[ 0.161855] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.162134] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.162257] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.162268] TCP: reno registered
[ 0.162280] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.162322] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.162389] NET: Registered protocol family 1
[ 0.162397] pci 0000:00:02.0: Boot video device
[ 1.491880] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.821411] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.821534] PCI: CLS 64 bytes, default 64
[ 2.821560] Unpacking initramfs...
[ 2.860148] Freeing initrd memory: 3292k freed
[ 2.860410] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.860412] software IO TLB [mem 0xb6d7e000-0xbad7e000] (64MB) mapped at [ffff8800b6d7e000-ffff8800bad7dfff]
[ 2.860631] audit: initializing netlink socket (disabled)
[ 2.860638] type=2000 audit(1366547290.869:1): initialized
[ 2.869024] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.870168] VFS: Disk quotas dquot_6.5.2
[ 2.870192] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.870287] msgmni has been set to 31925
[ 2.870432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.870451] io scheduler noop registered
[ 2.870452] io scheduler deadline registered
[ 2.870455] io scheduler cfq registered (default)
[ 2.870600] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 2.870600] vesafb: scrolling: redraw
[ 2.870602] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.871275] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 8128k, total 8128k
[ 2.980432] Console: switching to colour frame buffer device 240x67
[ 3.089134] fb0: VESA VGA frame buffer device
[ 3.089141] intel_idle: MWAIT substates: 0x1120
[ 3.089141] intel_idle: v0.4 model 0x3A
[ 3.089142] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.089165] GHES: HEST is not enabled!
[ 3.089198] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.109690] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.109934] Linux agpgart interface v0.103
[ 3.109973] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.110328] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.110343] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.110406] mousedev: PS/2 mouse device common for all mice
[ 3.110446] rtc_cmos 00:05: RTC can wake from S4
[ 3.110549] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.110579] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.110620] cpuidle: using governor ladder
[ 3.110670] cpuidle: using governor menu
[ 3.110671] EFI Variables Facility v0.08 2004-May-17
[ 3.110696] drop_monitor: Initializing network drop monitor service
[ 3.110739] TCP: cubic registered
[ 3.110796] NET: Registered protocol family 10
[ 3.110880] NET: Registered protocol family 17
[ 3.110888] Key type dns_resolver registered
[ 3.111039] PM: Hibernation image not present or could not be loaded.
[ 3.111044] registered taskstats version 1
[ 3.111641] Magic number: 9:762:481
[ 3.111722] rtc_cmos 00:05: setting system clock to 2013-04-21 12:28:11 UTC (1366547291)
[ 3.112698] Freeing unused kernel memory: 820k freed
[ 3.112774] Write protecting the kernel read-only data: 8192k
[ 3.115117] Freeing unused kernel memory: 1224k freed
[ 3.116059] Freeing unused kernel memory: 440k freed
[ 3.120597] systemd-udevd[55]: starting version 201
[ 3.121991] [drm] Initialized drm 1.1.0 20060810
[ 3.122543] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.122548] ACPI: Power Button [PWRB]
[ 3.122604] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.122606] ACPI: Power Button [PWRF]
[ 3.124834] [drm] Memory usable by graphics device = 2048M
[ 3.124837] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 3.124838] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.124847] Console: switching to colour dummy device 80x25
[ 3.124912] i915 0000:00:02.0: setting latency timer to 64
[ 3.147632] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 3.147637] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.147638] [drm] Driver supports precise vblank timestamp query.
[ 3.147660] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.160432] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 3.170403] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 3.223613] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 4.074424] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 4.094365] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 4.094384] tsc: Refined TSC clocksource calibration: 3392.294 MHz
[ 4.094386] Switching to clocksource tsc
[ 4.147630] [drm:init_ring_common] *ERROR* bsd ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 4.147706] [drm:i915_driver_load] *ERROR* failed to init modeset
[ 4.148415] i915: probe of 0000:00:02.0 failed with error -5
[ 4.161263] ACPI: bus type usb registered
[ 4.161317] usbcore: registered new interface driver usbfs
[ 4.161324] usbcore: registered new interface driver hub
[ 4.161413] usbcore: registered new device driver usb
[ 4.161574] SCSI subsystem initialized
[ 4.162262] ACPI: bus type scsi registered
[ 4.162335] libata version 3.00 loaded.
[ 4.162367] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.162577] ehci-pci: EHCI PCI platform driver
[ 4.162612] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 4.162615] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 4.162619] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.162631] ehci-pci 0000:00:1a.0: debug port 2
[ 4.166507] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 4.166520] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe406000
[ 4.174224] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.174406] hub 1-0:1.0: USB hub found
[ 4.174411] hub 1-0:1.0: 2 ports detected
[ 4.174488] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 4.174491] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 4.174494] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.174504] ehci-pci 0000:00:1d.0: debug port 2
[ 4.178376] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 4.178387] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe405000
[ 4.187519] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.187706] hub 2-0:1.0: USB hub found
[ 4.187709] hub 2-0:1.0: 2 ports detected
[ 4.187805] ata_piix 0000:00:1f.2: version 2.13
[ 4.187823] ata_piix 0000:00:1f.2: MAP [
[ 4.187824] P0 P2 P1 P3 ]
[ 4.340467] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4.340720] scsi0 : ata_piix
[ 4.341117] scsi1 : ata_piix
[ 4.341342] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
[ 4.341347] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
[ 4.341360] ata_piix 0000:00:1f.5: MAP [
[ 4.341360] P0 -- P1 -- ]
[ 4.480019] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.493313] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 4.493326] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.493538] scsi2 : ata_piix
[ 4.493885] scsi3 : ata_piix
[ 4.494108] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[ 4.494109] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[ 4.603626] hub 1-1:1.0: USB hub found
[ 4.603699] hub 1-1:1.0: 4 ports detected
[ 4.709364] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.832948] hub 2-1:1.0: USB hub found
[ 4.833043] hub 2-1:1.0: 6 ports detected
[ 4.898989] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 4.999004] usbcore: registered new interface driver usbhid
[ 4.999005] usbhid: USB HID core driver
[ 4.999367] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 4.999427] hid-generic 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 5.002139] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
[ 5.002355] hid-generic 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 5.055167] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 5.360826] ata2.00: failed to resume link (SControl 0)
[ 5.424109] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[ 5.517457] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input4
[ 5.517569] hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input0
[ 5.523155] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input5
[ 5.523390] hid-generic 0003:045E:0745.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input1
[ 5.538878] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/input/input6
[ 5.539104] hid-generic 0003:045E:0745.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input2
[ 5.616931] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 5.679916] ata1.01: failed to resume link (SControl 0)
[ 5.702724] input: Western Digital External HDD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input7
[ 5.702795] hid-generic 0003:1058:0705.0006: input,hidraw5: USB HID v1.10 Device [Western Digital External HDD ] on usb-0000:00:1d.0-1.3/input1
[ 5.703448] Initializing USB Mass Storage driver...
[ 5.703513] scsi4 : usb-storage 2-1.3:1.0
[ 5.703555] usbcore: registered new interface driver usb-storage
[ 5.703556] USB Mass Storage support registered.
[ 5.832877] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.832888] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 5.839930] ata1.00: ATA-8: Hitachi HDS721010CLA330, JP4OA3MA, max UDMA/133
[ 5.839934] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.853220] ata1.00: configured for UDMA/133
[ 5.853398] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 6.381306] ata2.01: failed to resume link (SControl 0)
[ 6.392485] ata2.00: SATA link down (SStatus 4 SControl 0)
[ 6.392498] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 6.393465] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.393486] sd 0:0:0:0: [sda] Write Protect is off
[ 6.393488] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.393496] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.398867] sda: sda1 sda2
[ 6.399148] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.684261] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.704492] scsi 4:0:0:0: Direct-Access WD 5000BEV External 1.75 PQ: 0 ANSI: 4
[ 6.705358] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.706072] sd 4:0:0:0: [sdb] Write Protect is off
[ 6.706077] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6.706816] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6.706824] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.709057] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6.709064] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.709536] sdb: sdb1 sdb2 sdb3
[ 6.712170] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6.712177] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.712182] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 7.159102] systemd[1]: systemd 201 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 7.170787] systemd[1]: Set hostname to <monolith>.
[ 7.649154] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.649194] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.649202] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 7.649209] systemd[1]: Starting Network is Online.
[ 7.649215] systemd[1]: Reached target Network is Online.
[ 7.649220] systemd[1]: Starting mnt-netfs.automount.
[ 7.661823] systemd[1]: Set up automount mnt-netfs.automount.
[ 7.661832] systemd[1]: Starting Remote File Systems.
[ 7.661838] systemd[1]: Reached target Remote File Systems.
[ 7.661843] systemd[1]: Starting Syslog Socket.
[ 7.661864] systemd[1]: Listening on Syslog Socket.
[ 7.661870] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.661885] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.661890] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.661900] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.661904] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.661918] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.661923] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.661934] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.661940] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.661962] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.661980] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.662020] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.662026] systemd[1]: Starting Journal Socket.
[ 7.662050] systemd[1]: Listening on Journal Socket.
[ 7.662059] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.682703] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.686581] systemd[1]: Starting Apply Kernel Variables...
[ 7.690932] systemd[1]: Mounting Debug File System...
[ 7.694343] systemd[1]: Starting Journal Service...
[ 7.700886] systemd[1]: Started Journal Service.
[ 7.712541] systemd[1]: Starting Load Kernel Modules...
[ 7.714248] systemd[1]: Starting Encrypted Volumes.
[ 7.714259] systemd[1]: Reached target Encrypted Volumes.
[ 7.714267] systemd[1]: Starting Setup Virtual Console...
[ 7.730815] systemd[1]: Starting udev Kernel Socket.
[ 7.730835] systemd[1]: Listening on udev Kernel Socket.
[ 7.730869] systemd[1]: Starting udev Control Socket.
[ 7.730884] systemd[1]: Listening on udev Control Socket.
[ 7.730912] systemd[1]: Starting udev Coldplug all Devices...
[ 7.747426] systemd[1]: Starting udev Kernel Device Manager...
[ 7.770676] systemd[1]: Mounting Huge Pages File System...
[ 7.787329] systemd[1]: Starting Swap.
[ 7.787341] systemd[1]: Reached target Swap.
[ 7.787360] systemd[1]: Started File System Check on Root Device.
[ 7.787366] systemd[1]: Mounting Temporary Directory...
[ 7.810621] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.817216] systemd[1]: Expecting device dev-disk-by\x2duuid-e2db39e9\x2d056c\x2d44ed\x2d8d42\x2d1b027e4a0d24.device...
[ 8.023502] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.045846] systemd-udevd[121]: starting version 201
[ 8.151804] loop: module loaded
[ 8.186713] vboxdrv: Found 4 processor cores.
[ 8.186976] vboxdrv: fAsync=0 offMin=0x216 offMax=0x9aea
[ 8.187033] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.187034] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[ 8.716904] ACPI: Requesting acpi_cpufreq
[ 8.728317] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.767237] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xa
[ 8.853130] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.853132] ACPI: Thermal Zone [THRM] (37 C)
[ 8.929755] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 9.026224] mei 0000:00:16.0: setting latency timer to 64
[ 9.026302] mei 0000:00:16.0: irq 40 for MSI/MSI-X
[ 9.032384] parport_pc 00:03: reported by Plug and Play ACPI
[ 9.032430] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 9.167592] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.167844] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 9.167971] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90005c22000, b8:97:5a:0a:fc:9e, XID 0c900800 IRQ 41
[ 9.167973] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.345693] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xa
[ 9.386088] ppdev: user-space parallel port driver
[ 9.386810] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xa
[ 9.387792] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xa
[ 9.388032] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 9.469096] media: Linux media interface: v0.10
[ 9.476345] Linux video capture interface: v2.00
[ 9.497387] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b)
[ 9.510837] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9
[ 9.510906] usbcore: registered new interface driver uvcvideo
[ 9.510907] USB Video Class driver (1.1.1)
[ 9.529106] iTCO_vendor_support: vendor-support=0
[ 9.537373] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 9.537428] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 9.537524] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.544558] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 9.607707] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 9.626188] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.626255] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.626287] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.626319] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.626349] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 10.336472] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.732413] 4:3:1: cannot set freq 16000 to ep 0x86
[ 10.881026] usbcore: registered new interface driver snd-usb-audio
[ 10.903764] r8169 0000:02:00.0 eth0: link down
[ 10.903796] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.903806] r8169 0000:02:00.0 eth0: link down
[ 11.696715] systemd-logind[297]: Watching system buttons on /dev/input/event1 (Power Button)
[ 11.696774] systemd-logind[297]: Watching system buttons on /dev/input/event0 (Power Button)
[ 12.498819] r8169 0000:02:00.0 eth0: link up
[ 12.498826] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.281485] FS-Cache: Loaded
[ 19.295688] FS-Cache: Netfs 'cifs' registered for caching
[ 19.295798] Key type cifs.spnego registered
[ 19.295811] Key type cifs.idmap registered
[ 74.361879] mtrr: no MTRR for d0000000,3ff0000 found
With modesetting disabled I no longer see " [drm:i915_driver_load] *ERROR* failed to init modeset", but get a new error that the agpgart module cannot be initialized:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 13 09:01:47 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet nomodeset
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bad8bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad8c000-0x00000000badd5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000badd6000-0x00000000badddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000badde000-0x00000000baddefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baddf000-0x00000000bae00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae01000-0x00000000bae01fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bae02000-0x00000000bae11fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae12000-0x00000000bae1ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae20000-0x00000000bae44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae45000-0x00000000bae87fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae88000-0x00000000baffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000e00fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fe407fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed93fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: BIOSTAR Group H61MGC/H61MGC, BIOS 4.6.4 01/19/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 43FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbae02 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcd80-0x000fcd8f] mapped at [ffff8800000fcd80]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbae01fff]
[ 0.000000] [mem 0x00000000-0xbadfffff] page 2M
[ 0.000000] [mem 0xbae00000-0xbae01fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbae01fff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x43fdfffff]
[ 0.000000] [mem 0x100000000-0x43fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x43fdfffff @ [mem 0xbad7e000-0xbad8bfff]
[ 0.000000] RAMDISK: [mem 0x37982000-0x37cb8fff]
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000badd6068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000baddcfe0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000badd6150 06E89 (v02 ALASKA A M I 00000014 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bae17f80 00040
[ 0.000000] ACPI: APIC 00000000baddd0d8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000baddd150 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000baddd258 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000baddd298 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASPT 00000000baddd2d0 00034 (v07 ALASKA PerfTune 01072009 AMI 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43fdfffff]
[ 0.000000] NODE_DATA [mem 0x43fdfb000-0x43fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f400000-ffff88043f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xbad8bfff]
[ 0.000000] node 0: [mem 0xbae01000-0xbae01fff]
[ 0.000000] node 0: [mem 0x100000000-0x43fdfffff]
[ 0.000000] On node 0 totalpages: 4171547
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11879 pages used for memmap
[ 0.000000] DMA32 zone: 748326 pages, LIFO batch:31
[ 0.000000] Normal zone: 53240 pages used for memmap
[ 0.000000] Normal zone: 3354120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000bad8c000 - 00000000badd6000
[ 0.000000] PM: Registered nosave memory: 00000000badd6000 - 00000000badde000
[ 0.000000] PM: Registered nosave memory: 00000000badde000 - 00000000baddf000
[ 0.000000] PM: Registered nosave memory: 00000000baddf000 - 00000000bae01000
[ 0.000000] PM: Registered nosave memory: 00000000bae02000 - 00000000bae12000
[ 0.000000] PM: Registered nosave memory: 00000000bae12000 - 00000000bae20000
[ 0.000000] PM: Registered nosave memory: 00000000bae20000 - 00000000bae45000
[ 0.000000] PM: Registered nosave memory: 00000000bae45000 - 00000000bae88000
[ 0.000000] PM: Registered nosave memory: 00000000bae88000 - 00000000bb000000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0100000
[ 0.000000] PM: Registered nosave memory: 00000000e0100000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fe408000
[ 0.000000] PM: Registered nosave memory: 00000000fe408000 - 00000000fe800000
[ 0.000000] PM: Registered nosave memory: 00000000fe800000 - 00000000fea00000
[ 0.000000] PM: Registered nosave memory: 00000000fea00000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fed94000
[ 0.000000] PM: Registered nosave memory: 00000000fed94000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xcfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043fa00000 s85184 r8192 d21312 u524288
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4106358
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16342728k/17823744k available (4908k kernel code, 1137556k absent, 343460k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3392.360 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.41 BogoMIPS (lpj=11307866)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000027] AppArmor: AppArmor disabled by boot time parameter
[ 0.000670] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003579] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004861] Mount-cache hash table entries: 256
[ 0.004978] Initializing cgroup subsys cpuacct
[ 0.004980] Initializing cgroup subsys memory
[ 0.004985] Initializing cgroup subsys devices
[ 0.004986] Initializing cgroup subsys freezer
[ 0.004987] Initializing cgroup subsys net_cls
[ 0.004988] Initializing cgroup subsys blkio
[ 0.005004] CPU: Physical Processor ID: 0
[ 0.005005] CPU: Processor Core ID: 0
[ 0.005009] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005270] mce: CPU supports 9 MCE banks
[ 0.005280] CPU0: Thermal monitoring enabled (TM1)
[ 0.005287] process: using mwait in idle threads
[ 0.005289] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.005412] Freeing SMP alternatives: 20k freed
[ 0.006082] ACPI: Core revision 20121018
[ 0.007828] ftrace: allocating 19310 entries in 76 pages
[ 0.014664] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047574] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.047580] TSC deadline timer enabled
[ 0.047582] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.047586] ... version: 3
[ 0.047586] ... bit width: 48
[ 0.047587] ... generic registers: 8
[ 0.047588] ... value mask: 0000ffffffffffff
[ 0.047588] ... max period: 000000007fffffff
[ 0.047589] ... fixed-purpose events: 3
[ 0.047590] ... event mask: 00000007000000ff
[ 0.087678] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.074249] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.128013] Brought up 4 CPUs
[ 0.128016] smpboot: Total of 4 processors activated (27149.66 BogoMIPS)
[ 0.130345] devtmpfs: initialized
[ 0.131553] PM: Registering ACPI NVS region [mem 0xbad8c000-0xbadd5fff] (303104 bytes)
[ 0.131558] PM: Registering ACPI NVS region [mem 0xbadde000-0xbaddefff] (4096 bytes)
[ 0.131559] PM: Registering ACPI NVS region [mem 0xbae12000-0xbae1ffff] (57344 bytes)
[ 0.131560] PM: Registering ACPI NVS region [mem 0xbae45000-0xbae87fff] (274432 bytes)
[ 0.132024] RTC time: 13:15:37, date: 04/21/13
[ 0.132050] NET: Registered protocol family 16
[ 0.132136] ACPI: bus type pci registered
[ 0.132173] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.132175] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.137361] PCI: Using configuration type 1 for base access
[ 0.137775] bio: create slab <bio-0> at 0
[ 0.137809] ACPI: Added _OSI(Module Device)
[ 0.137810] ACPI: Added _OSI(Processor Device)
[ 0.137811] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.137811] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.138385] ACPI: EC: Look up EC in DSDT
[ 0.139103] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.140495] ACPI: SSDT 00000000bae16c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.140660] ACPI: Dynamic OEM Table Load:
[ 0.140662]Meanwhile, I encountered it seems to be a problem of the gdm in conjunction with the gpu and the intel driver - once again :-(
Look at this thread: https://bbs.archlinux.org/viewtopic.php?id=161964
Actually, I can start my DE (Gnome 3.8) manually with the following workaround:
First, I disable gdm on my machine
# systemctl disable gdm
After bootin the machine, I'm logging in into the console
$ startx
stopping the X system again
$ sudo systemctl start gdm
logging in into the Gnome Shell.
I need to start the X server first manually. Otherwise the gdm will hang again.
Last edited by thesofty (2013-04-24 21:12:10) -
I have been using a Mac Mini with an external hard and Time Machine. I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme. I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme. I have been using the optical drive from the Mac mini to load programs into the Mac Book Air. I think I'm just getting confused in Finder. I am just not seeing the hard drive. I ended up plugging the hard drive back into the Mac Mini and that is work fine again. How do I setting the external hard drive up to the AirPort Extreme and use for both computers? Or at least to start with the Mac mini.
It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to. -
HD needs repair but only get a looping Restart with a Leopard DVD and USBHD
Ok here are my specs
Model Name: MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB51.0073.B06
SMC Version (system): 1.32f8
Ok so here is a quick a dirty break down.
Computer has been acting Programs freezing and CPU slowing down.
I ran Verify Disk in Disk Utilities and it said I need to repair Disk.
After a day of head aches I am finally asking for help.
So here is the problem on my old powerbook pro I could just load in Target Mode and repair with tech tool or disk warrior but alas my macbook has no firewire.
So just incase of emergancy's I have a thumbdrive with a live 10.5.3 and all my disk utilities. I've used it on my wifes older Intel Macbook Pro 17" and it works fine.
Today though when i restart hold down the option key "alt" and select the drive my macbook restarts acts like its going to load and the restarts again. This restart loop will go on as long as I let it.
Ok so usb drives can be problematic. Surely starting to the OS X Retail DVD with 10.5.4 and running disk utilities will work. Nope still get the endless restart loop when I've loaded the install dvd and restart with command "c" as well I get the same response if I select it after holding the option key.
Now my hard drive won't even start up either unless I boot in single user mode.
I am lost.
HELP Please.Have you tried booting into safeboot (safemode)? You may want to try resetting your PRAM and or SMC. Another thing you might try is to plug the thumbdrive in the other USB port.
If you could get an external USB drive with osx on it you could try booting from it.
Apple sure did screw up not putting firewire on that Macbook, my wife has one and I just can't get over it. Sure can make it hard to troubleshoot.
Maybe you are looking for
-
Has CS6 been repaired so it can record 4 channels at 24 bit 96 kHz?
When I tried the demo it botched my files by using a 16/48 format for writing a 24/96 files. I lost a lot of work on that plus 2 tracks.
-
Questions before I SWITCH to Mac...
Few questions before I switch to Mac (hoepfully when Leopard comes out).... Currently I have a Dell XPS Media Center PC and a Vista laptop. 1. TV/DVR CAPABILITIES: I love using my PC as a tv tuner & DVR. Does mac have this capability? If I run Vista
-
Hi, I am trying to create inventory count in transaction MI09 with out reference to invenory document. After creating one, when I tried to create again with the sample material numbers and batches (for testing), I am getting the error message "Physic
-
Problems with Illustrator CC 2014 in Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen.
Hello to everybody! Some times ago Adobe has updated Illustrator to CC 2014 version and now it support touch pressure\pan\zoom in Windows 8 tablets. I have Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen with pressure-sensitive support.
-
Disabling wifi on time capsule
Hi all, I'd like to disable the wifi on my time capsule, so I can back up via ethernet instead (the back ups are way way too slow - taking weeks each time, then aborting if the wifi goes down). Anyone know how to do this? FYI. My imac is upstairs wit