FCPro either freezes while FW drives connected or unmounts them...

FCPro keeps either freezing while FW drives are connected or unmounts them. Unmount is the wrong word, I actually get the 'put away incorrectly' error message. Occasionally FC runs OK while the drives are connected except it wont give me a video preview (through both Sony DSR-30 and my camera). Typically it'll run OK and will capture OK until it has to access the external drives to render or import, then it freezes and sometimes also breaks the connection to the drives.
This has just started happening on two diff FC systems in my office running two separate copies of Final Cut (one 4.5, the other 5.0) with various brands of FW drives connected.
I've reinstalled Final Cut, reinstalled the OS, trashed Pref's, run FC3, tried different FW cables and trashed the QT version receipts all to no avail.
The FW drives run fine in the Finder as long as FCut isn't open.
PLEASE HELP ME! Argh!

New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
If we use the forums properly they will work well...

Similar Messages

Computer freezing while trying to connect to usb by pc card on laptop

Hi, im trying to help a friend out who has problems with his ipod. he has a compaq laptop presario 2108us. he only has 2 usb slots in the back which are broken. the broken one somtimes works as far as connecting the ipod to the computer, but does not charge it. when it does connect, it transfers files fine while at the same time, doesnt charge. so to try to fix his usb problem, i bought the pc card with 2 usb. his laptop is capable of card slot type 1,2,and 3, and compatible with 16 bits. with the card, it works fine with a jumpdrive, recognizes everything. when i try to connect the ipod to it, it shows up in my computer, but not itunes, and after a couple minutes the computer totally freezes, mouse and everything, shortly after i manually dissconnect my ipod, the computer responds like normal again. we've tried 2 different brands of cards, ive done all the microsoft updates. and the pc card does work with the ipod withanother laptop, so its the computer. although i think that a system recovery might help, i just wanted to get some more information before i take that step, thanks.

Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin

Error while testing Driver connection Through The EnterPrise Manager

Hi -
I am using OAS 10.1.3v for my application.I am using both SQL Server 2000 JDBC driver and Oracle JDBC driver for my application. I am encountering problems due to SQL Server 2000 JDBC driver.
I tried testing for connectivity for SQL driver through the enterprise manager.(on the em console, inside home/administration/JDBC resources ). I am getting the following error :
Unable to create : com.microsoft.jdbc.sqlserver.SQLServerDriver
Missing class: com.microsoft.jdbc.sqlserver.SQLServerDriver Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils Loader: oc4j:10.1.3 Code-Source: /E:/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar Configuration: in META-INF/boot.xml in E:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar This load was initiated at ascontrol.web.ascontrol:0.0.0 using the Class.forName() method. The missing class is available from the following locations: 1. Code-Source: /E:/product/10.1.3.1/OracleAS_1/j2ee/home/applib/mssqlserver.jar (from in /E:/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml) This code-source is available in loader global.libraries:1.0. This shared-library can be imported by the "ascontrol" application
I tried adding mssqlserver.jar to the shared library.Still, i got the same error.
The connection which i am trying to test, has the following entry in the data-sources.xml :
<connection-pool name="BPELPM_CONNECTION_POOL1" max-connections="30">
     <connection-factory factory-class="com.microsoft.jdbc.sqlserver.SQLServerDriver" user="sa" password="" url="jdbc:microsoft:sqlserver://localhost:1433;databaseName=WE411;selectMethod=cursor" commit-record-table-name=""/>
     </connection-pool>
     <managed-data-source connection-pool-name="BPELPM_CONNECTION_POOL1" jndi-name="jdbc/ExpressJDBCDataSource" name="ExpressJDBCDataSource"/>
I also tried with native-data-source option in the data-source.xml without a connection pool like -
<native-data-source
name="ExpressJDBCDataSource"
jndi-name="jdbc/ExpressJDBCDataSource"
description="Native DataSource"
data-source-class="com.microsoft.jdbc.sqlserver.SQLServerDataSource"
user="sa"
password=""
url="jdbc:microsoft:sqlserver://localhost:1433;databaseName=WE411 ;selectMethod=cursor ">
</native-data-source>
I am getting the same error as above.
Has anybody encountered a similiar problem ?
A related post that was posted by me is :
SQL Server Driver Problem in Oracle Application Server 10.1.3 data-sources

thank you very much for your help. for update server's full name, may I put the mapping values into host file in the format of <ip address> <hostname.domain name> <hostname>, do you think it is OK?
in the second blog you suggest there is something about Server port(please refer to the following):
in the window machine, there should be an entry like sapms<SAP System ID> , can you please give me a full example:
let's say my system ID is EC1, so it would be sapmsEC1 8000/tcp, right ?
Here you have to enter the port of your application server. By default this is 80<SAP System ID>. But your basis administrator can modify this setting, thatu2019s why you should check it in the transaction SMICM (Goto -> Parameters -> Display). For example the IBSolution Development System Erinome the port is 8000.
You can also have a look into your services file on your machine. If you have a windows machine then the file exists e.g. here C:\WINDOWS\system32\drivers\etc\services
In this file you should search a entry like sapms<SAP System ID>.
Edited by: jingying Sony on May 24, 2010 4:41 PM

Programs crash/freeze while attempting to connect to internet-databases

Without any replicable reason, programs like Transmission, SoundGenie, CoverScout oder iTunes (when trying to access Gracenote Database) are freezing/crashing immediately after startup.
It just happens on my MacBook Air (2011), SSD with OS X 10.6.8
Any ideas?

She has connected it to another internet source and told it to forget the internet password. Then reconnected it to our internet and it is working. However if anyone knows why or how to prevent this in future....It's quite a long, complicated password and would hate to have to input it every time.

Freeze while accessing iTunes Store

When it try to use column browser to search for podcasts iTunes freezes while "accessing iTunes Store" and I have to force quit iTunes. Why is this?

No error messages are given. It will either freeze while saying "Accessing iTunes Store," or without saying anything at all.
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I copied all my CD's onto a hard drive. Can I transfer each CD from the hard drive to my iPhone either wirelessly or by direct connection?

I copied all my CD's onto a hard drive. Can I transfer each CD from the hard drive to my iPhone either wirelessly or by direct connection? Do I have to make a playlist for each cd and then transfer it to my iPhone?

When you buy your new iMac you will be able to have the installation process transfer all your applications, data (including music, pictures, documents, etc) and settings to your new computer. In the past that was done via Firewire. I'm not entirely sure of the process with the new iMacs that don't have firewire. I think it can be done via ethernet and probably via tha thunderbolt cord using a firewire adapter but you'll want to check that out.
    With the your new computer properly connected to your old computer, the initial booting of the new computer will include the ability to move everything over.
    If for some reason you don't want to do that (smart if you have some horrible software issue that is causing problems) you can connect your old computer to the new one and start it in Target Disk mode where it will be seen as a hard drive. You can then manually copy over all your music and import that into iTunes (and any other data you want).
    Somebody here will surely point you to directions for connecting an older iMac with no Thunderbolt to a newer iMac with no Firewire.

TS1363 When I connect my Iphone 5 to Itunes, Itunes either freezes up or I get a message saying Itunes cannot connect to this device and I need to hit restore phone. How can this be fixed?

When I connect my Iphone 5 to Itunes, Itunes either freezes up or I get a message saying Itunes cannot connect to this phone and I need to restore Iphone.

After uninstalling and reinstalling Itunes- issue was fixed. Thanks!

Freezes when waking up with Firewire drive connected??

When you put your mac to sleep are you supposed to unmount your external drives(firewire)? is this different for firewire vs. usb?
I have a Dual 2GHz G5 and an Iomega "black" 250Gig external hard drive connected through firewire and many times (not always) when i put the computer to sleep or it goes to sleep by itself when it wakes up the computer freezes (spinning ball) but un-freezes if i pull the firewire cable.
what am i doing wrong?

There could be a problem with the FW drive's firmware. Older, non-standards-complying versions have been known to do stuff like this, especially with newer Macs that are more stringent in what they tolerate. Check with the manufacturer for updates.

Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
Specs;
Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
Processor - Intel Core i7 Processor - i7-3820 LGA 2011
Processor fan - Intel Thermal Solution RTS2011 AC
RAM - Ballistix by Crucial - 2x 8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
Power Supply - Cooler Master Extreme Power Plus 700W
Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
I have, as far as software goes...
Windows 7 64-bit SP1
Adobe Creative Suite 5, student version or what have you.
- I do have several plugins installed as well for After Effects only.
Autodesk 3ds Max 2012
-I have several maxscripts as well as a couple plugins for 3ds Max.
UDK 2-2012 & 3-2012
NVIDIA PhysX Lab 1.1
NVIDIA Texture Tools 2
NVIDIA plugin for Photoshop
xNormal
ConTEXT
UnCodeX
Quicktime
AVG Free
Malwarebytes
7-Zip
Java
Sculptris
As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
"Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

Toshiba Satellite C655 SP4168M freezes while playing a game

So i've been having problems with mi laptop very recently with a game i'm playing (League of legends), the game normally works perfectly, but at random times it just completely freezes (making an awkward sttutering sound) and i have to forcefully shutdown and restart the PC. It doesnt happen ALL the time, but when it happens it's really annoying, and i can either happen once every week, or several times daily. I already repaired the video driver but that didnt help, i was thinking about updating the BIOS; but cant find the correct version for my laptop, and i cant even be sure that's actually the problem. Any help would be greatly appreciated.

try using a program like "Piriform Speccy" (free version), and monitor the CPU temps as you are using the system. If it gets up into the orange and red while watching videos, you may need to apply fresh thermal paste to the CPU.
My old L355 is starting to freeze while watching youtube videos the other day, and just confirmed that the CPU is overheating. Will be tearing it apart hopefully tonight to be cleaned up and have a fresh application of arctic silver on the CPU.

Backup an external hard drive connected to Airport -- is this possible?

Currently I have a hub connected to my airport extreme. There are 2 external hard drives connected to the hub. One has my iTunes library on it, and the other is being used for time machine backups.
I have no problem doing the backup wirelessly to the one hard drive. In time machine, I could pick either external drive to back up to. What I am trying to do is back up the external drive too. Time machine is only seeing the hard drive on my laptop. The exclude list is blank and when I try to add the itunes HD to the exclude list (to remove it), it won't let me select it-- it is greyed out.
If I connect the itunes HD directly into my laptop, I can run the backup, but that is not very convenient. Is what I am trying to do possible? Does anyone have any ideas? Are there any other posts discussing this (I could not find any with my specific problem).
Thanks!

nealmay wrote:
Currently I have a hub connected to my airport extreme. There are 2 external hard drives connected to the hub. One has my iTunes library on it, and the other is being used for time machine backups.
I have no problem doing the backup wirelessly to the one hard drive. In time machine, I could pick either external drive to back up to. What I am trying to do is back up the external drive too. Time machine is only seeing the hard drive on my laptop. The exclude list is blank and when I try to add the itunes HD to the exclude list (to remove it), it won't let me select it-- it is greyed out.
That's correct. Time Machine will not back up a network drive (see #2 in the Frequently Asked Questions *User Tip* at the top of this forum).
You're going to need a different app. Which one will depend on where you want the backups to go; some apps will not back-up from a network drive; others won't back up to a network drive. I don't know, offhand, of any that will do both. Perhaps Kappy, V.K., or others will.
For backups to a local disk, try either CarbonCopyCloner (which I use to make a full bootable "clone" in addition to Time Machine), and I think SuperDuper will do this as well. CCC is donationware, so you can try it for a while, then send them some $$ so they can keep it current. It can be scheduled to run automatically, and you have the choice of it keeping only current copies or to archive prior versions as well. SuperDuper has a free version, but you need the paid one (about $30) to do scheduling. I don't know if it will keep archive copies.
There are many other backup apps, some of which will handle network drives. Check Google, VersionTracker.com, or MacUpdate.com.

Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool

In both Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool with horizontal images. Im running Lightroom on a Quad-Core Intel Xeon Mac with 32 GB of memory with OS 10.8.4, this problem has gotten worse and worse to the point where the crop tool is unusable. Please help!

Alright,
no replies so far! Anyways, here's some more information which is leading me to the conclusion that the bug causing the effect described above is a combination of Apple's SMB implementation of Mavericks and the way Lightroom is actually using SMB network access:
I did another trial by connecting a USB hard drive to the USB port of my router (Netgear). The connection is quite slow, but moving one of the folders in question (see my 1st post above) to the shared drive connected to the Router made Lightroom on my Windows machine to see the photos again, when I told Lightroom where to find the moved folder!
Everything was working as expected, on the Windows machine again! Moving the folder back again to the Mac Mini fileshare was causing Lightroom on the PC to get blind again for the pictures trying to sync or import. However, accessing and modifying a photo was possible again, like it was before the trial. So it's only the sync and import function having a problem!
I also did some trial in re-building ACLs and access rights on the file server with no luck. So there's got to be a functionality in sync and import of Lightroom which is using a certain SMB feature which is not supported by Apple's SMB implementation!
Any thoughts or hints?
Thanks!

ITunes 7.6.2.9 freezing while syncing, won't shut down without reboot.

I've been lurking here for the past few days hoping to find a solution to my problem. So far nothing is working. Here's the scoop:
I have two iPods as seen below. iTunes updated the other day and I now have 7.6.2.9 which Apple reports is the most recent version. After this update I had synced the older iPod and did a firmware update on it (it isn't home very often so it had been a while since it's last sync). The Classic is normally synced every few days to keep it all up-to-date. After iTunes updated I started getting odd error messages when plugging in the Classic. One told me I had purchased content on my iPod that was not in my library... this could not be true as this iPod has never touched another computer to get such things and it syncs automatically. I told it to delete the stuff and sync, it seemed to work, but I noticed some of my songs had stopped playing. I looked around and all the suggestions on this issue were to restore the iPod. So I did. Thats when the fun started. For some reason 7.6.2.9 WILL NOT re-sync my iPod Classic. There are over 2000 tracks of audio that are now gone from my iPod because I restored it and the most I have been able to sync is around 200. Everytime I plug the iPod in and iTunes starts syncing (on both manual and automatic), iTunes freezes up and stops syncing the iPod. iPod goes from "synchronizing" to "connected".. but it hasn't finished transfering the songs. When this happens, iTunes WILL NOT shut down. Can't get to the iTunes screen... it's on the taskbar, but clicking it does nothing, nor will Alt+Tab take me there. Right clicking on the taskbar and selecting Close will bring up the "program is not responding blah blah blah" dialog box and I tell Windows to close it, but it will not. I can't even kill the process in the Windows Task Manager to get it to stop running. EVERYTIME I plug in my iPod, I end up rebooting my computer to get iTunes to stop running. This of course is leaving my iPod only partially sync'd. This is really making me mad. PLEASE somebody help!

FYI...
I think I found my problem. I'm doing a partial sync now to my iPod to see if it works. After going through every step possible including uninstalling iTunes 7.6.2.9 and rolling back to 7.5 without success I had pretty much given up to taking my iPod to the Apple Store to see if they could test it's hard drive. Which, makes me wonder why they took the HDD scan off the Classic's diagnostic mode and left the Firewire test which you can never complete.
While talking to my husband on the phone and explaining to him what it was doing and questioning whether his iPod had been acting strange... I ran across an article in iPod Support talking about how to fix issues with iPod not recognizing the hard drive properly and songs disappearing. It mentioned another of my symptoms... Windows kept treating it like a hard drive and wouldn't eject it when iTunes did. It had completely stopped ejecting on it's own afer a sync. The problem started out simple and progressively seemed to get worse.
The article mentioned a network drive causing the iPod to change drive letters and iTunes would sometimes put files meant for the iPod on the drive. I don't have any network drives connected.. haven't in about a year. So I shrugged it off at first... then it dawned on me. The iPod had always came up as drive K:. But now it was showing as L:. I had created a partition last weekend to install a second OS and it had taken the K: spot. Apparently my iPod did not like this and iTunes was too accustomed to it being K: that it would forget partway through the syncing process and start looking for K: again? I went into Disk Management and changed K: to Z: and the iPod back to K:. I have done a few small syncs with success (only certain playlists, etc). No error messages, the iPod ejects when it's done and the songs STAY on the iPod. I'm doing a larger sync now of about 800+ tracks. If that works, I'll put the remaining 2000 back on.
Apparently ever since the day I had both iPod's plugged in, the 5th Gen has been known as L:, so iTunes didn't see anything different with it when it synced. Mine had moved, however, and was throwing a temper tantrum!

Error While Creating Informix Connection Pool

Hi,
I am trying to port an application from Weblogic 6.1 to Weblogic 8.1. The Application accesses Informix database. I used the following driver, url and properties while connecting to this database using Weblogic 6.1
url:->jdbc:weblogic:informix4:snss_live
Driver ClassName :-> weblogic.jdbc.informix.InformixDriver
Properties :->
port=22000
user=snssadmn
password=snssadmn
server=10.115.26.40
The above used to work fine with weblogic 6.1
With Weblogic 8.1, I am using the following properties
url :-> jdbc:bea:informix://10.115.26.40:22000;informixServer=10.115.26.40;databaseName=snss_live
Driver ClassName :-> weblogic.jdbc.informix.InformixDriver
Properties :->
informixServer=10.115.26.40
user=snssadmn
portNumber=22000
databaseName=snss_live
serverName=10.115.26.40
However using these properties I am getting the following error while deploying the Connection Pool to the Managed Server
<Dec 29, 2004 12:26:53 PM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "Btv_Vms_Pool": [BEA][Informix JDBC Driver][Informix]INFORMIXSERVER does not match either DBSERVERNAME or DBSERVERALIASES.>
<Dec 29, 2004 12:26:54 PM EST> <Error> <JDBC> <BEA-001150> <Connection Pool "Btv_Vms_Pool" deployment failed with the following error: 0:Could not create pool connection. The DBMS driver exception was: [BEA][Informix JDBC Driver][Informix]INFORMIXSERVER does not match either DBSERVERNAME or DBSERVERALIASES..>
Any idea as to why this is happening
Regards
Nitin Nair

Hi. I suspect that the databaseName property is causing the problem in
8.1. Remove it and see if that works. Also, try running:
java utils.dbping, and giving it the properties it asks for, for your
Informix connection. Once it succeeds in making a connection, it will
print out the URL and properties it used. Then define the pool with
those (and only those) properties and URL.
Joe
Nitin Nair wrote:
Hi,
I am trying to port an application from Weblogic 6.1 to Weblogic 8.1. The Application accesses Informix database. I used the following driver, url and properties while connecting to this database using Weblogic 6.1
url:->jdbc:weblogic:informix4:snss_live
Driver ClassName :-> weblogic.jdbc.informix.InformixDriver
Properties :->
port=22000
user=snssadmn
password=snssadmn
server=10.115.26.40
The above used to work fine with weblogic 6.1
With Weblogic 8.1, I am using the following properties
url :-> jdbc:bea:informix://10.115.26.40:22000;informixServer=10.115.26.40;databaseName=snss_live
Driver ClassName :-> weblogic.jdbc.informix.InformixDriver
Properties :->
informixServer=10.115.26.40
user=snssadmn
portNumber=22000
databaseName=snss_live
serverName=10.115.26.40
However using these properties I am getting the following error while deploying the Connection Pool to the Managed Server
<Dec 29, 2004 12:26:53 PM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "Btv_Vms_Pool": [BEA][Informix JDBC Driver][Informix]INFORMIXSERVER does not match either DBSERVERNAME or DBSERVERALIASES.>
<Dec 29, 2004 12:26:54 PM EST> <Error> <JDBC> <BEA-001150> <Connection Pool "Btv_Vms_Pool" deployment failed with the following error: 0:Could not create pool connection. The DBMS driver exception was: [BEA][Informix JDBC Driver][Informix]INFORMIXSERVER does not match either DBSERVERNAME or DBSERVERALIASES..>
Any idea as to why this is happening
Regards
Nitin Nair

Firewire drives connect only rarely

I have two Firewire drives connected through a Belkin hub. Everything used to be hunky dory. Then one would no longer connect, now both will no longer connect. Once in a while, they'll both appear when I turn the computer on - they were both available all last week. Today I can't get either to appear.
Both drives always work fine on other computers. Using the hub or not makes no difference. Both drives work fine via USB. I have zapped the pram many times and reset the SMC per other recommendations, no luck.
Anything else I can try?????? Desperate!

I believe that there is a BIG problem with MBP and FW. Apple is not acknowledging a SERIOUS problem. I have not been able to get my FW drives to work properly and even invested in a FW express card. But still, my MBP is finicky.
good luck

FCPro either freezes while FW drives connected or unmounts them...

Similar Messages

Maybe you are looking for