Fcpx 10.2 export changed the shape and position of my shape masks. Ideas?

Fcpx 10.2. Upon export it changed the shape and position of my shape masks. It also created "cordoroy" looking screens where some photos had been. Looking for help.

Hi Tom,
Thanks for the response. My project is 1280x720 29.97 fps. Here's a shot of the corduroy. The first time I exported using the "export" choice. I rebooted and exported again choosing "master" file. The settings were the same on both- 1280x720, 29.97, H.264. The corduroy went away the second time. The masks are still off. I'm using them throughout my project. They are closer to center on both of the quicktime movie outputs than on my screen in the project. I could send pics.

Similar Messages

How to change the font and size in the fillable field of an encrypted PDF file?

hi!
I’d like to change the font and size in the fillable field of an encrypted PDF file I-485 from www.uscis.gov/files/form/i-485.pdf
I’m using Adobe Acrobat Pro 9 in Windows XP. I firstly tried Adobe LiveCycle Designer, but the I-485 file requires password to be opened, which I don’t know.
Then I tried to print it to a PDF file, and use the Typewriter tool to fill in the form. But got error message while printing it to PDF file:
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.
The I-485 file can be exported to unencrypted postscript file, but got the same error message while trying to open the ps file.
I don’t know much about pdf file, can anyone please help?
Thanks a lot!

Ask the creator of the file for a unprotected version.

Photoshop crashes when I change the roundness and rotation of brushes

Photoshop SC4 64bit Vista.
It appears to be very predictable crash that always happens within about 1 to 10 minutes every time after using brushes with different roundness and rotation.
I usually paint with 100% round brushes with Shape and Other Dynamics checked and set to pen pressure and Photoshop never crashes. However recently I started to change the roundness and rotation of the brushes and Photoshop started to crash when I do that.
So far the crashing occurs during painting when the brush palette is open and I start to change the roundness and rotation of the brush either interactively or by the sliders. It always crashes - sometimes right away, sometimes later. But as far as I have noticed it can't last more than about 10 minutes of active brush usage. The crash is a white screen with the clock spinning and when I click the Vista message comes saying that Photoshop stop responding and need to close. I also tried a few times to wait for hours to see if it will come back after the white screen but it never did.
Have you experienced or heard of this and some fixes?

Update to Photoshop 11.0.1.
And make sure your video card driver is up to date (check NVidia or ATI web sites).

How to change the width and height of the visible part of the of the report

I have define a report with paper size 'Letter', orientation 'landscape' and 30 columns. Dynamically I am changing width of columns and suppressing many columns of the report.
Mostly using first 16-20 columns and others get suppressed.
Now problem is that when navigating the report thru crystal viewer, a huge blank spaces getting display on right of the report. When we take jump to some part of report thru navigation tree, the whole report gets shifted to left and only blank part is visible and it is required to scroll left.
Even printing is not working correctly.
Is there any way to change the width and height of the visible part of the report in the viewer thru .net classes? Setting the width and height of the report in Load event handler doesn't help.
Example: CrystalReportViewer1.Width = 200; - is not helping.
Is there any other solution?
Please let me know.
Thanks
Mahesh Patel

Hi Yogesh,
Your suggestion 'reportDocument.PrintOptions.PaperSize=PaperSize.PaperLedger;' along with 'PaperOrientation' setting as follow works fine. I tried to switch between Landscape and Portrait depending on report width.
reportDocument.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
But problem with crystal viewer remain as it is.
While navigating report thru crystal viewer, when we take jump to some part of report thru navigation tree, the whole report gets shifted to left and it is required to scroll left.
Thanks for your very good suggestion.
Mahesh Patel

How to change the header and footer in the Section Breaks Next Page using OpenXML?

I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
button in the Word Application but I don't know how to change it using XML?
My code that adds the new page in the section breaks is:
class Program
static void Main(string[] args)
string path = @"C:\Riyaz\sample.docx";
string strtxt = "Hello This is done by programmatically";
OpenAndAddTextToWordDocument(path,strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
document.InsertSectionPageBreak();
Paragraph p1 = document.InsertParagraph();
p1.Append("This is new section");
document.Save();
Please help.

Here is the sample for your reference:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
namespace WordAddNewFooterHeader
class Program
static void Main(string[] args)
string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
string strtxt = "OpenXML SDK";
OpenAndAddTextToWordDocument(path, strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
// Open a WordprocessingDocument for editing using the filepath.
WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
Body body = part.Document.Body;
//create a new footer Id=rIdf2
FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
GenerateFooterPartContent(footerPart2);
//create a new header Id=rIdh2
HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
GenerateHeaderPartContent(headerPart2);
//replace the attribute of SectionProperties to add new footer and header
SectionProperties lxml = body.GetFirstChild<SectionProperties>();
lxml.GetFirstChild<HeaderReference>().Remove();
lxml.GetFirstChild<FooterReference>().Remove();
HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
lxml.Append(headerReference1);
lxml.Append(footerReference1);
//add the correlation of last Paragraph
OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
Columns columns1 = new Columns() { Space = "720" };
DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
sectionProperties1.Append(headerReference2);
sectionProperties1.Append(footerReference2);
sectionProperties1.Append(pageSize1);
sectionProperties1.Append(pageMargin1);
sectionProperties1.Append(columns1);
sectionProperties1.Append(docGrid1);
paragraphProperties1.Append(sectionProperties1);
oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
part.Document.Save();
wordprocessingDocument.Close();
//Generate new Paragraph
public static Paragraph GenerateParagraph(string text, string rsidR)
Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
Tabs tabs1 = new Tabs();
TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
tabs1.Append(tabStop1);
paragraphProperties1.Append(tabs1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = text;
run1.Append(text1);
Run run2 = new Run();
TabChar tabChar1 = new TabChar();
run2.Append(tabChar1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
paragraph1.Append(run2);
return paragraph1;
static void GenerateHeaderPartContent(HeaderPart hpart)
Header header1 = new Header();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
header1.Append(paragraph1);
hpart.Header = header1;
static void GenerateFooterPartContent(FooterPart fpart)
Footer footer1 = new Footer();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
footer1.Append(paragraph1);
fpart.Footer = footer1;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

Does this involve iPhoto in some way?

I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that account. How do I change the email address to a new one that I can access?

I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that same account. Now I can't seem to login to that account and I can't choose the option for forgot password because it will send email to the old workplace. How do I change the email address to a new one that I can access?

If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you!

I have an ipod touch and it is disabled cause my cousin changed the password and forgot what it is so now it is stuck .. i connected it to the itunes but still the keypad didnt appear and couldnt remember the password.. anyone can help me ?

i have an ipod touch and it is disabled cause my cousin changed the password and forgot what it is so now it is stuck .. i connected it to the itunes but still the keypad didnt appear and couldnt remember the password.. anyone can help me ?

Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

How can I change the Country and Credit card Apple ID without loose the app installed ?

Hi, I move from Brazil to Qatar and keep using my account at Brazil since I have a credit card there and the old address.
Today Ireceived a message when I was updating my app at my iPad that I should change my payment method that was rejected (???), I try to update and keep the same message... So now maybe better to use address and card from Qatar.
I could not understand how can I change the country and shop since everything at the address is linked to Brazil.
Also I'm afraid to lose the installed app...
Please, a step by step will help a lot, I have a very low computer experience ...

You won't lose apps that are installed.   You will lose the ability to update them
Business with the App stores is restricted to those stores in your formal country of residence (your billing address) and a bank supported credit card from that same country.   You can buy and update apps with those details only in that country.
If you have established residences and bank supported accounts in other countries you can also use those.   You can buy and update apps in those countries using those details.
You cannot interchange them.   You cannot merge IDs or purchase details.

I have a balance of 0.95c on my apple id (from gift card) but now i moved, and i want change the country and credit card. How can i do that?

I have a balance of 0.95c on my apple id (from gift card) but now i moved and i want to change the country and add credit card. Every time i tried to change the info it says that i need to spend the existing balance. What should i do?

Click here and ask the iTunes Store staff to zero your account balance.
(92880)

I have changed the name and password for my Time Capsule and now the Time Machine will not connect

Mac Book Pro
1TB Time Capsule.
Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
When I enter the time machine preferences it shows as below that there are no back ups.
Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
(And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).

Simply reset the Time Machine.
See A4 here http://pondini.org/TM/Troubleshooting.html
You can then mount the TC disk in finder after you reboot the computer.
You should be able to reselect the TC disk and then it will say it is going to start a new backup.
Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
Please also install the widget A1 so you have some idea what TM is doing.

How can I change the font and color of an email signature?

How can i change the font and color of an email signature?

Mail > Preferences > Signature
Highlight the Signature.
Click Format in the menu bar and select " Show Fonts".
Select the Font.
Highlight the Text.
Click Format in the menu bar and select " Show Colors".
Select the color.
Mail > Preferences > Composing > Message Format: Rich Text
Best.

My iPhone 4 broke so I had to buy a new one. I backed up the old one on iTunes and when I went to restore the new one it won't allow me to because it is saying that I have the wrong password. I tried changing the password and it still won't work. HELP!

My iPhone 4 screen shattered so I had to buy a new one. I backed up my shattered iPhone to iTunes so that I could restore my new one. When I went to restore it, it said that I had an incorrect password although I know it was right. I tried changing the password and it still told me that I had an incorrect password. So now my new phone has lost all its pictures, its music, its apps.... is there anything I can do to get my phone to restore?? PLEASE HELP!

If you can't get the password correct, you CANNOT restore from that backup.
However, if you've been using your phone as recommended by Apple, there should be minimal data loss.
Your iTunes library is on your computer, so you can synch all your apps, music, movies, ringtones, etc, on to your new phone.
Similarly, contacts should be synched to Address Book, Outlook, or a cloud service for you to easily synch back to your new phone.
Pictures taken from your old phone and not synched to your computer are lost, but you would have been synching those photos to your computer frequently as recommended. Other photos that you synch TO your iPhone are still on your computer.
You won't be able to get text messages back.

Just had an ipad and made a mistake on the password. Have now changed the password and everthing works great except facetime it will not accept the password. how can i change it please

Hi Just had an ipad for xmas and it worked great,but I wasn't sure of my password and guessed (should have waited till I got home), eventually I changed the password and left it over night.
Success I could now access my apple account, but could not gain access to the "Facetime", telling me to reset password or check internet connection all of which are working great. How can I get round this problem please.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Fcpx 10.2 export changed the shape and position of my shape masks. Ideas?

Similar Messages

Maybe you are looking for