FCPX 120fps slow down
Hi all
I have some Gopro 120fps footage which I want to slow down
I imported the clip to fcpx dropped it into to the timeline (30p rate) and then thought that i could retime it 50% or 25% and then get smooth slow motion slowed down to 1/2 or 1/4.. but its not working ?
What am I doing wrong here ?
Thx
Dennis Hansen
First, select the clip in the timeline and from the retiming menu select automatic speed (I'm assuming a current version of the app). See how that looks and then apply a speed change. Activate the retiming bar in the timeline (Cmd-R) and drag the tab at the end to adjust the speed.
Similar Messages
-
Published motion template slows down FCPX
Hi, I have published a simple snow effect made in Motion 5 to FCPX. Every time I try to add the effect to a clip in FCPX, it slows down everything and I get the beach ball spinning. If I switch off the effect everything goes back to normal. What is the deal? Ant suggestions?
One more thing, I have an Imac 10.6.8 early 2010 2.8 i7 8gb. FCPX uses all the ram available when rendering, etc. I thought that you need only 4gb as minimum req. Do I need more ram? I just use it for simple videos, I'm not a pro, but at times it gets really annoying when the imac slows down.
Thanks,
AndreaIt depends on what the Motion template is doing. If it's doing a lot of work, which is very easy to make a Motion project do, it will grind things down. The minimum specs of FCP X are for doing minimum work. I'd never touch FCP X, and especially Motion 5 with anything less than 8GB RAM. But more important is the graphics card you're running. What card are you running?
-
How to slow down FCPX titles in motion?
In FCPX I can slow down the tiles motions by dragging the tiles out.
But that does not always help.
So I try to use Motion to slow down the typing tile in FCPX. I get it to work by doing this:
But in FCPX the clip is too long. The speed is ok, and the text in the title behaves beautiful, but when the motion text is finished typing the clips is still too long and empty.
By shortening it by dragging it will of course effect the speed of the typing again.
Guide anyone?Found the answer here:
Re: Speed of text in typewriter generator
https://discussions.apple.com/message/18153728#18153728 -
Compressor 4.1.2 slowing down my computer until it is unusable
Hey all,
I'm using an iMac (specs below) and I have the latest versions of FCPX and Compressor (4.1.2). I've had a HUGE number of issues with the new Compressor update, specifically when it comes to 4K video. I'll take a project that is in 4K, OR that I shot in 4K and downscaled to 1080p by making the FCPX Project specs 1080p, then I "Send to Compressor."
Then I try to export from Compressor using default 1080p settings to my desktop.
Previous versions of Compressor would take their time in giving me my final project, but would otherwise leave my computer unaffected. However, Compressor 4.1.2 is slowing down my computer to the point where it is unusable. Moving windows/folders around on the desktop takes forever to load. I can't browse the internet or do ANYTHING when Compressor is doing its thing now.
Interestingly, when I export using FCPX's "share" function, I have no problems.
Help! Is there anything I can do with Compressor to stop it from destroying my computer memory every time I export something in 1080p from 4K? Is anyone experiencing the same problems?
Thanks!
Specs:
iMac: 3.4 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GTX 680MX 2048MBIf you have system backups, you can probably restore to an earlier version. That would take care of your needs prospectively. Any libraries that had been updated, would;t open in an earlier version of FCP X. But of course, your master files could be used in both Final Cut and Compressor.
Also, send your results to Apple using the Provide Compressor Feedback link in the Compressor drop down menu.
Russ -
Ive recorded a test video with audio/music playback slowed down 65% what speed do I need to speed the video back up to to get it into "real" time?
If I'd slowed the audio playback down 50% I would make the video 100% faster.
If I'd slowed the audio playback down 100% I would make the video 200% faster.
So its obviously somewhere inbetween speeding up by 100-200%
Sorry but its melting my brain today and I cant remember the calculation.
thankshey all
Thanks for the advise on this. I will explain a little more what am have/am intending to do.
I have used Audacity to slow the song down (Effect>Change Tempo)
Audacity will allow me slow the original song down by up to 99% (Or anything in-between up to 3 decimal places)
Unfortunately I am working to a time restraint of 12 minutes per clip (as my DSLR will only allow up to a 12 minute clip).
The song at normal speed is 4 minutes long.
Originally I slowed the audio down by 50% (Making the audio 8 minutes long), lip synced to it using a rasta blaster and recorded the video using my DSLR at 720p 50fps.
I then imported the video and audio I had been lip syncing to into FCPX.
I sped up the video by x2 (equivalent to speeding it up 200%)
Retime>Fast 2X
Layered the PROPER normal speed audio back over the top and all was fine.
Test video complete.
(You can ignore the 65% slowed down audio I mentioned earlier if you like, that was just an example of a slower than 50% audio test)
Firstly what I really want to do is to be able to slow the AUDIO down as much as possible (But still within the restraints of only being able to adjust FCPX retiming within a whole 1 percentage in the final video edit), but have the AUDIO of the song as near to/under 12 minutes as possible.
I will then re-record the video again to this new slowed down audio.
Secondly I will speed up the video from 12 minutes to 4 minutes.
Thirdly I will layer the correct 100% Normal AUDIO on top.
The FINISHED video should then look like everyone is wizzing around at high speed but the guitar playing/lyrics look like they are being played/sung at the normal speed.
Whatever happens (due to the constraints of FCPX) I need the calculations to work so that FCPX is retimed exactly to a whole 1% for the final video to sync up correctly.
So what I need to know in a nut shell is:-
What calculation do I use to work out the percentage to slow a 4 minute song down to a 12 minute song?
What calculation do I use to work out the percentage of how much I need to then speed the 12 minute video up to turn it back into a 4 minute video?
My mind is melting -
My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?
DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money. -
System Slow-Down After Printing
I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Timer Class not accurate and slows down my animation!?
Does anyknow how why my timer object is not accurate and why it slows down my animation that is also present on my GUI at the same time?
I have a timer in the form of 0.00 the left of the decimal point should represent a second but it doesnt, run my code and see for yourselves. below is my code if anyone can fix these 2 problems i will be very thankfull:
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.Shape;
import java.io.*;
import java.text.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.Timer;
import java.sql.*;
import java.text.*;
public class RT extends JFrame implements MouseMotionListener
//declares a number of swing componets to be used for the JFrame
private JTextArea infoJTextArea;
private JPanel showJPanel, startJPanel, helpJPanel, resultsJPanel;
private JLabel de4JLabel, de3JLabel, mainTitleJLabel, nameJLabel, ageJLabel,
deJLabel, de1JLabel, de2JLabel, timeJLabel,nameResultJLabel,
ageResultJLabel, timeResultsJLabel, ratingJLabel, coJLabel, shJLabel;
private JTextField nameJTextField, ageJTextField,nameResultJTextField,
ageResultsJTextField, timeResultsJTextField, ratingJTextField;
private JButton exitJButton, showJButton, loginJButton, startTestJButton,
tempObjectJButton;
private JScrollPane scroll;
public JComboBox colourJComboBox, sizeJComboBox, shapeJComboBox, speedJComboBox;
private static Connection dbcon;
int temp=0;
private String[] col = { "Red", "Blue", "Green","Yellow","Orange","Black"};
private String[] shapeA = { "Normal Rectangle", "Normal Circle", "Normal Oval","BIG Rectangle", "BIG Circle","BIG Oval","small rectangle","small circle", "small oval"};
private String[] speed = { "Fast", "Normal", "Slow"};
public int checking;
static int flag, flagshape, flagspeed;
// creates and sets up a number of varibles to be used by the class
public long timeLimit = 0;
DecimalFormat timeDec = new DecimalFormat (":00");
public int age;
public String name, shapeChoice="Normal Rectangle(Never selected anything)", colourChoice="Black(Never selected anything)";
private Timer TimeNow;
private JTextField timerJTextField;
ShapeMovingPanel testJPanel;
Random seed;
Shape shape;
Shape[] shapes = {new Rectangle2D.Double(50, 30, 75, 25),new Ellipse2D.Double(175, 125, 50, 50),new Ellipse2D.Double(90, 100, 75, 35),new Rectangle2D.Double(50, 30, 175, 125),new Ellipse2D.Double(175, 125, 125, 125),new Ellipse2D.Double(90, 100, 175, 135),new Rectangle2D.Double(50, 30, 55, 15),new Ellipse2D.Double(175, 125, 20,20),new Ellipse2D.Double(90, 100, 55, 15)};
//50, 30, 75, 25 change starting point here****************************************
public RT() // constructor method
seed = new Random();
shape = shapes[0];
//sets up the Timer
TimeNow = new Timer((1), new TimerListener());//++++++++++++++++++++++++++timer -17
createUserInterface(); // method that creates the user interface
private void createUserInterface()
new Thread(new Runnable()
public void run()
String results = "";
int count = 0;
boolean journeyOn = true;
while(journeyOn && count < 3)
try
Thread.sleep(1000);
catch(InterruptedException ie)
System.err.println("show interrupt: " + ie.getMessage());
journeyOn = false;
results += count++ + ", ";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
dbcon = DriverManager.getConnection("jdbc:odbc:CMT3991", "", ""); // Access/ODBC
//connection ash used to connect to the user table in access
} catch(Exception eee)
eee.printStackTrace(); //exception if error occurs during the driver connection
System.out.println("* UserDA CONNECTED *");
}).start();
Container contentPane = getContentPane();
contentPane.setLayout( null );
// set up infoJTextField
infoJTextArea = new JTextArea();
infoJTextArea.setBounds( 20, 420, 550, 170 );
infoJTextArea.setEditable( false);
infoJTextArea.setText("\n Welcome to the reaction testing program, this " +
"program is designed to test your reactions in a \n"+
" number of different situations.\n"+"\n Please " +
"enter your name and age, or select show previous results.");
contentPane.add( infoJTextArea );
scroll = new JScrollPane(infoJTextArea);
scroll.setBounds( 20, 420, 550, 170 );
contentPane.add( scroll );
startJPanel = new JPanel();
startJPanel.setBounds( 16,16, 560, 375 );
startJPanel.setBorder(
new TitledBorder( "WELCOME - PLEASE ENTER YOUR NAME AND AGE:" ) );
startJPanel.setLayout( null );
contentPane.add( startJPanel );
//sets up a JPanel
mainTitleJLabel = new JLabel();
mainTitleJLabel.setIcon( new ImageIcon( "title.png" ) );
mainTitleJLabel.setBounds( 30, 10, 520, 170 );
mainTitleJLabel.setHorizontalAlignment( JLabel.CENTER );
startJPanel.add( mainTitleJLabel );
//creates a newJLabel
nameJLabel= new JLabel();
nameJLabel.setBounds( 52, 200, 70, 35 );
nameJLabel.setText("Name:");
startJPanel.add( nameJLabel);
//creates a new JTextField
nameJTextField = new JTextField();
nameJTextField.setBounds( 130, 200, 300, 24 );
startJPanel.add( nameJTextField );
//creates a newJLabel
ageJLabel = new JLabel();
ageJLabel.setBounds( 52, 245, 100, 35 );
ageJLabel.setText("Age:");
startJPanel.add( ageJLabel );
//creates a new JTextField
ageJTextField = new JTextField();
ageJTextField.setBounds( 130, 245, 300, 24 );
startJPanel.add( ageJTextField );
//creates a JButton
loginJButton = new JButton();
loginJButton.setBounds( 440, 200, 90, 24 );
loginJButton.setText( "Login" );
loginJButton.setBackground( Color.YELLOW );
startJPanel.add( loginJButton );
loginJButton.setEnabled(true);
// loginJButton.setVisible(true);
loginJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
// not necessary to pass events to these methods...
Login(); // calls the Login method
//creates a JButton
showJButton = new JButton();
showJButton.setBounds( 200, 320, 180, 24 );
showJButton.setText( "Show previous results" );
showJButton.setBackground( Color.YELLOW );
startJPanel.add( showJButton );
showJButton.setEnabled(true);
// showJButton.setVisible(true);
showJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
showData(); // calls the showData method
//sets up a JPanel
showJPanel = new JPanel();
showJPanel.setBounds( 16,16, 560, 375 );
showJPanel.setBorder(new TitledBorder( "PREVIOUS RESULTS:" ) );
showJPanel.setLayout( null );
contentPane.add( showJPanel );
//sets up a JPanel
helpJPanel = new JPanel();
helpJPanel.setBounds( 16,16, 560, 375 );
helpJPanel.setBorder(
new TitledBorder( "CHOOSE A NUMBER OF OPTIONS AND GET READY:" ) );
helpJPanel.setLayout( null );
helpJPanel.setVisible(false);
contentPane.add( helpJPanel );
//creates a newJLabel
deJLabel= new JLabel();
deJLabel.setBounds( 23, 390, 530, 35 );
deJLabel.setText("Details:");
contentPane.add( deJLabel);
//creates a newJLabel
coJLabel= new JLabel();
coJLabel.setBounds( 70, 40, 530, 35 );
coJLabel.setText("Choose a colour:");
helpJPanel.add( coJLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds( 25, 100, 530, 35 );
de1JLabel.setText("You are about to start the reaction test, when you " +
"press the start button it will begin.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds(160, 145, 530, 35 );
de1JLabel.setText("Simply catch the moving item and click.");
helpJPanel.add( de1JLabel);
colourJComboBox = new JComboBox( col );
colourJComboBox.setBounds( 70, 70, 135, 21 );
colourJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( colourJComboBox );
colourJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
colourChoice="Black";
int x = colourJComboBox.getSelectedIndex();
if( x == 0)
flag = 1;
colourChoice="Red";
else if(x == 1)
flag = 2;
colourChoice="Blue";
else if(x == 2)
flag = 3;
colourChoice="Green";
else if(x == 3)
flag = 4;
colourChoice="Yellow";
else if(x == 4)
flag = 5;
colourChoice="Orange";
else if(x == 5)
flag = 6;
colourChoice="Black";
shJLabel= new JLabel();
shJLabel.setBounds( 340, 40, 530, 35 );
shJLabel.setText("Choose a shape and size:");
helpJPanel.add( shJLabel);
shapeJComboBox = new JComboBox( shapeA );
shapeJComboBox.setBounds( 340, 70, 135, 21 );
shapeJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( shapeJComboBox );
shapeJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
int xshape = shapeJComboBox.getSelectedIndex();
//shapeChoice="Normal Rectangle";
if( xshape == 0)
{ flagshape = 1;
shapeChoice="Normal Rectangle";
else if(xshape == 1)
{ flagshape = 2;
shapeChoice="Normal Circle";
else if(xshape == 2)//**********here
{ flagshape = 3;
shapeChoice="Normal Oval";
else if(xshape == 3)
{ flagshape = 4;
shapeChoice="BIG Rectangle";
else if(xshape == 4)
{ flagshape = 5;
shapeChoice="BIG Circle";
else if(xshape == 5)
{ flagshape = 6;
shapeChoice="BIG Oval";
else if(xshape == 6)
flagshape = 7;
shapeChoice="small rectangle";
else if(xshape == 7)
{ flagshape = 8;
shapeChoice="small circle";
else if(xshape == 8)
{ flagshape = 9;
shapeChoice="small oval";
/* speedJComboBox = new JComboBox( speed );
speedJComboBox.setBounds( 10, 150, 135, 21 );
speedJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( speedJComboBox );
speedJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
int xspeed = speedJComboBox.getSelectedIndex();
if( xspeed == 0)
flagspeed = 1;
else if(xspeed == 1)
flagspeed = 2;
else
flagspeed = 3;
System.out.println(flagspeed);
//creates a newJLabel
de2JLabel= new JLabel();
de2JLabel.setBounds( 20, 380, 70, 35 );
de2JLabel.setText("Details:");
helpJPanel.add( de2JLabel);
//creates a JButton
startTestJButton = new JButton();
startTestJButton.setBounds( 185, 205, 180, 60 );
startTestJButton.setText( "START" );
startTestJButton.setBackground( Color.YELLOW );
helpJPanel.add( startTestJButton );
startTestJButton.setEnabled(true);
// startTestJButton.setVisible(true);
startTestJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
startTest();
//sets up an animation panel
testJPanel = new ShapeMovingPanel(this);
testJPanel.setBounds( 16,16, 560, 375 );
testJPanel.setBorder(new TitledBorder("Click the moving object:"));
testJPanel.setLayout( null );
testJPanel.setVisible(false);
contentPane.add( testJPanel );
testJPanel.addMouseMotionListener(this);
//creates a newJLabel
timeJLabel = new JLabel();
timeJLabel.setBounds( 440, 330, 100, 35 );
timeJLabel.setText("Time:");
testJPanel.add( timeJLabel );
//creates a new JTextField
timerJTextField = new JTextField();
timerJTextField.setBounds( 480, 335, 60, 24 );
timerJTextField.setText(String.valueOf(timeLimit));
timerJTextField.setHorizontalAlignment(JTextField.CENTER );
timerJTextField.setEditable(false);
timerJTextField.setBackground( Color.YELLOW );
testJPanel.add( timerJTextField );
resultsJPanel = new JPanel();
resultsJPanel.setBounds( 16,16, 560, 375 );
resultsJPanel.setBorder(new TitledBorder("HERE ARE YOUR RESULTS:"));
resultsJPanel.setLayout( null );
resultsJPanel.setVisible(false);
contentPane.add( resultsJPanel );
de3JLabel= new JLabel();
de3JLabel.setBounds(20, 200, 530, 35 );
de3JLabel.setText("Below is also the movements you made with your mouse, " +
"you may exit the program now.");
resultsJPanel.add( de3JLabel);
de4JLabel= new JLabel();
de4JLabel.setBounds(135, 245, 530, 35 );
de4JLabel.setText("Thank you for trying the Reaction Testing program");
resultsJPanel.add( de4JLabel);
//creates a newJLabel
nameResultJLabel= new JLabel();
nameResultJLabel.setBounds( 62, 55, 50, 35 );
nameResultJLabel.setText("Name:");
resultsJPanel.add( nameResultJLabel);
//creates a new JTextField
nameResultJTextField = new JTextField();
nameResultJTextField.setBounds( 140, 55, 300, 24 );
resultsJPanel.add( nameResultJTextField );
nameResultJTextField.setEditable(false);
//creates a newJLabel
ageResultJLabel = new JLabel();
ageResultJLabel.setBounds( 62, 90, 100, 35 );
ageResultJLabel.setText("Age:");
resultsJPanel.add( ageResultJLabel );
//creates a new JTextField
ageResultsJTextField = new JTextField();
ageResultsJTextField.setBounds( 140, 90, 300, 24 );
resultsJPanel.add( ageResultsJTextField );
ageResultsJTextField.setEditable(false);
//creates a newJLabel
timeResultsJLabel = new JLabel();
timeResultsJLabel.setBounds( 62, 125, 100, 35 );
timeResultsJLabel.setText("Time taken:");
resultsJPanel.add( timeResultsJLabel );
//creates a new JTextField
timeResultsJTextField = new JTextField();
timeResultsJTextField.setBounds( 140, 125, 300, 24 );
resultsJPanel.add( timeResultsJTextField );
timeResultsJTextField.setEditable(false);
//creates a newJLabel
ratingJLabel = new JLabel();
ratingJLabel.setBounds( 62, 160, 100, 35 );
ratingJLabel.setText("Your Rating:");
resultsJPanel.add( ratingJLabel );
ratingJTextField = new JTextField();
ratingJTextField.setBounds( 140, 160, 300, 24 );
resultsJPanel.add( ratingJTextField );
ratingJTextField.setEditable(false);
//creates a JButton
exitJButton = new JButton();
exitJButton.setBounds( 235, 310, 90, 24 );
exitJButton.setText( "Exit" );
exitJButton.setBackground( Color.WHITE );
resultsJPanel.add( exitJButton );
exitJButton.setEnabled(true);
exitJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when exitJButton is pressed
public void actionPerformed( ActionEvent event )
System.exit(0); //closes the programme
}); // end anonymous inner class
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// set properties of application's window
setTitle( "Reaction Tester - CMT3991" ); // set JFrame's title bar string
//setSize( 1280,995 ); // set width and height of JFrame
setSize( 608, 650 ); // set width and height of JFrame
setVisible( true ); // display JFrame on screen
//** set up of method main */
public static void main( String[] args )
RT application = new RT();
application.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
} // end method main
* action listener for TimeNow Timer
private class TimerListener implements ActionListener
public void actionPerformed(ActionEvent event)
timeLimit ++;
if (timeLimit==100)
temp++;
timeLimit=0;
timerJTextField.setText(String.valueOf(temp +""+timeDec.format(timeLimit)));
private void Login()
try
name = nameJTextField.getText();
age = Integer.parseInt(ageJTextField.getText());
startJPanel.setVisible(false);
showJPanel.setVisible(false);
helpJPanel.setVisible(true);
infoJTextArea.setText("\n Welcome "+name+" you will soon know how " +
"fast your reactions are.");
catch (NumberFormatException exception)
JOptionPane.showMessageDialog(this,
"There is either a blank field or a number hasn't been entered",
"Input Type error", JOptionPane.ERROR_MESSAGE);
//shows this is something has been entered wrong
private void startTest()
helpJPanel.setVisible(false);
// System.out.println(""+ seed.nextInt(shapes.length));
//shape = shapes[seed.nextInt(shapes.length)];//****************************
if (flagshape==1)
shape = shapes[0];// changed colour here***************************
else if (flagshape==2)
shape = shapes[1];// changed colour here***************************
else if (flagshape==3)
shape = shapes[2];// changed colour here***************************
else if (flagshape==4)
shape = shapes[3];// changed colour here***************************
else if (flagshape==5)
shape = shapes[4];// changed colour here***************************
else if (flagshape==6)
shape = shapes[5];// changed colour here***************************
else if (flagshape==7)
shape = shapes[6];// changed colour here***************************
else if (flagshape==8)
shape = shapes[7];// changed colour here***************************
else if (flagshape==9)
shape = shapes[8];// changed colour here***************************
// shape = shapes[8];
System.out.println(shape.toString());
testJPanel.setShape(shape);
testJPanel.setVisible(true);
testJPanel.start();
infoJTextArea.setText("");
TimeNow.start();
* called by animation panel after shape is clicked
public void stop()
TimeNow.stop();
movingObject();
* this will compete with your animation
* ie, it will slow it down or make it appear jerky
public void mouseMoved(MouseEvent e)
saySomething("\n Mouse moved", e);
public void mouseDragged(MouseEvent e)
saySomething("\n Mouse dragged", e);
void saySomething(String eventDescription, MouseEvent e)
infoJTextArea.append(eventDescription
+ " (" + e.getX() + "," + e.getY() + ")");
infoJTextArea.setCaretPosition(infoJTextArea.getDocument().getLength());
private void movingObject()
TimeNow.stop();
//timeLimit;
testJPanel.setVisible(false);
resultsJPanel.setVisible(true);
nameResultJTextField.setText(name);
ageResultsJTextField.setText(String.valueOf(age)+" years old");
System.out.println("shape used: "+shapeChoice);
String mouse = infoJTextArea.getText();
String tick = timerJTextField.getText();
timeResultsJTextField.setText(tick);
try
// create a file called welch.txt
final FileWriter outputFile = new FileWriter("Backup_of_"+name+"s_results.txt", true);
final BufferedWriter outputBuffer = new BufferedWriter(outputFile);
// converts data to a formatted string
final PrintWriter printstream = new PrintWriter(outputBuffer);
printstream.println("THIS IS A BACKUP");
printstream.println("The person's name is: "+name);
printstream.println("There age is: "+age);
printstream.println("Time taken: "+tick+" seconds");
printstream.println("The Shape and size was: "+shapeChoice);
printstream.println("It's colour was: "+colourChoice);
printstream.println("The mouse moved as follows: "+mouse);
//states what needs to be printed to the new file
printstream.close(); // closes teh printstream
catch(IOException eio)
//catchs the IO exception
if(temp<5.00)
ratingJTextField.setText("Thierry Henry");
else if(timeLimit<=10)
ratingJTextField.setText("Average");
else if(timeLimit<=15)
ratingJTextField.setText("You gotta be fat or something");
else if(timeLimit<=20)
ratingJTextField.setText("See a doctor");
else if(timeLimit>20)
ratingJTextField.setText("DO YOU KNOW WHAT YOU DOING!?");
String rate=ratingJTextField.getText();
try
Statement st = dbcon.createStatement();
String cmd = "INSERT INTO users (Name, Age, Time_Taken, Rating, Mouse_Movement,Shape_and_Size, Shape_Colour) VALUES ('" + name + "' , " + age + " , '" + tick + "' , '" + rate+"','"+ mouse+"','"+ shapeChoice+"','"+ colourChoice+"');";
//creates a SQL statement and executes it
st.executeUpdate(cmd);
st.close();//close the statement
} catch (Exception eDA)
eDA.printStackTrace();
private void showData()
// pretend this takes awhile -> 3 seconds (count)
new Thread(new Runnable()
public void run()
String results = "";
int count = 0;
boolean journeyOn = true;
while(journeyOn && count < 3)
try
Thread.sleep(1000);
catch(InterruptedException ie)
System.err.println("show interrupt: " + ie.getMessage());
journeyOn = false;
results += count++ + ", ";
infoJTextArea.setText("Here are your results:\n"+results);
startJPanel.setVisible(false);
showJPanel.setVisible(true);
}).start();
class ShapeMovingPanel extends JPanel implements ActionListener
RT host;
Timer timer;
Shape shape, xformed;
int x, y, dx, dy;
public ShapeMovingPanel(RT rt)
timer = new Timer(-20, this);
host = rt;
/* if (rt.flagspeed==1)
timer = new Timer(-20, this);
else if (rt.flagspeed==2)
timer = new Timer(20, this);
else if (rt.flagspeed==3)
timer = new Timer(100, this);
//change speed here******************************
x = 0;//0
y = 0;//0
dx =2;//2
dy = 3;//3
//setBackground(Color.pink);
addMouseListener(new ShapeTender());
public void actionPerformed(ActionEvent e)
int w = getWidth();
int h = getHeight();
if(w <= 0 || h <= 0)
return;
checkBoundries(w,h);
x += dx;
y += dy;
repaint();
private void checkBoundries(int w, int h)
Rectangle r = xformed.getBounds();
Insets insets = getInsets();
if(r.x + dx < insets.left || r.x + r.width + dx > w - insets.right)
dx *= -1;
if(r.y + dy < insets.top || r.y + r.height + dy > h - insets.bottom)
dy *= -1;
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
AffineTransform at = AffineTransform.getTranslateInstance(x, y);
if (RT.flag==1)
{g2.setPaint(Color.red);// changed colour here***************************
else if (RT.flag==2)
{g2.setPaint(Color.blue);// changed colour here***************************
else if (RT.flag==3)
{g2.setPaint(Color.green);// changed colour here***************************
else if (RT.flag==4)
{g2.setPaint(Color.yellow);// changed colour here***************************
else if (RT.flag==5)
{g2.setPaint(Color.orange);// changed colour here***************************
else if (RT.flag==6)
{g2.setPaint(Color.black);// changed colour here***************************
xfoI'm (being lazy and) using the older RT app posted on your last thread. I removed the
TimeNow timer from the RT class and used System.currentTimeMillis (as you requested) to
determine the elapsed time during the animation (see "startTest", "stop" and
"movingObject" methods). Also changed the DecimalFormat to NumberFormat and set the
"maximumFractionDigits" to "2" so it will truncate the fraction to two digits (more simple
than before). Made arrangements for the ShapeMovingPanel class to update the
"timerJTextField" during the animation (RT.updateTime method).
The MouseMotionListener is causing the animation to appear jerky and uneven. The
"mouseMoved" method is very busy while the mouse is moving. You might consider recording
the "mousePressed" events instead of the "mouseMoved" events, ie, the events where the user
is attempting to click inside the moving shape. It would allow the app to be more
responsive and might eliminate the uneven motion of the animating shape.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.io.*;
import java.text.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.Timer;
public class RT extends JFrame implements MouseMotionListener
//declares a number of swing componets to be used for the JFrame
private JTextArea infoJTextArea;
private JPanel showJPanel, startJPanel, helpJPanel, resultsJPanel;
private JLabel de4JLabel, de3JLabel, mainTitleJLabel, nameJLabel, ageJLabel,
deJLabel, de1JLabel, de2JLabel, timeJLabel,nameResultJLabel,
ageResultJLabel, timeResultsJLabel, ratingJLabel;
private JTextField nameJTextField, ageJTextField,nameResultJTextField,
ageResultsJTextField, timeResultsJTextField, ratingJTextField;
private JButton exitJButton, showJButton, loginJButton, startTestJButton,
tempObjectJButton;
private JScrollPane scroll;;
// creates and sets up a number of varibles to be used by the class
private long startTime;
private long endTime;
public int timeLimit = 0;
public int age;
public String name;
private JTextField timerJTextField;
ShapeMovingPanel testJPanel;
NumberFormat timeDec;
Random seed;
Shape shape;
Shape[] shapes = {
new Rectangle2D.Double(50, 30, 75, 25),
new Ellipse2D.Double(175, 125, 50, 50),
new Ellipse2D.Double(90, 100, 75, 35)
public RT()
timeDec = NumberFormat.getInstance();
timeDec.setMaximumFractionDigits(2);
seed = new Random();
shape = shapes[0];
createUserInterface();
private void createUserInterface()
Container contentPane = getContentPane();
contentPane.setLayout( null );
// set up infoJTextField
infoJTextArea = new JTextArea();
infoJTextArea.setBounds( 20, 420, 550, 170 );
infoJTextArea.setEditable( false);
infoJTextArea.setText("\n Welcome to the reaction testing program, this " +
"program is designed to test your reactions in a \n"+
" number of different situations.\n"+"\n Please " +
"enter your name and age, or select show previous results.");
contentPane.add( infoJTextArea );
scroll = new JScrollPane(infoJTextArea);
scroll.setBounds( 20, 420, 550, 170 );
contentPane.add( scroll );
startJPanel = new JPanel();
startJPanel.setBounds( 16,16, 560, 375 );
startJPanel.setBorder(
new TitledBorder( "WELCOME -PLEASE ENTER YOUR NAME AND AGE:" ) );
startJPanel.setLayout( null );
contentPane.add( startJPanel );
//sets up a JPanel
mainTitleJLabel = new JLabel();
mainTitleJLabel.setIcon( new ImageIcon( "title.png" ) );
mainTitleJLabel.setBounds( 30, 10, 520, 170 );
mainTitleJLabel.setHorizontalAlignment( JLabel.CENTER );
startJPanel.add( mainTitleJLabel );
//creates a newJLabel
nameJLabel= new JLabel();
nameJLabel.setBounds( 52, 200, 70, 35 );
nameJLabel.setText("Name:");
startJPanel.add( nameJLabel);
//creates a new JTextField
nameJTextField = new JTextField();
nameJTextField.setBounds( 130, 200, 300, 24 );
startJPanel.add( nameJTextField );
//creates a newJLabel
ageJLabel = new JLabel();
ageJLabel.setBounds( 52, 245, 100, 35 );
ageJLabel.setText("Age:");
startJPanel.add( ageJLabel );
//creates a new JTextField
ageJTextField = new JTextField();
ageJTextField.setBounds( 130, 245, 300, 24 );
startJPanel.add( ageJTextField );
//creates a JButton
loginJButton = new JButton();
loginJButton.setBounds( 440, 200, 90, 24 );
loginJButton.setText( "Login" );
loginJButton.setBackground( Color.YELLOW );
startJPanel.add( loginJButton );
loginJButton.setEnabled(true);
loginJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
// not necessary to pass events to these methods...
Login(); // calls the Login method
//creates a JButton
showJButton = new JButton();
showJButton.setBounds( 200, 320, 180, 24 );
showJButton.setText( "Show previous results" );
showJButton.setBackground( Color.YELLOW );
startJPanel.add( showJButton );
showJButton.setEnabled(true);
showJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
showData(); // calls the showData method
//sets up a JPanel
showJPanel = new JPanel();
showJPanel.setBounds( 16,16, 560, 375 );
showJPanel.setBorder(new TitledBorder( "PREVIOUS RESULTS:" ) );
showJPanel.setLayout( null );
contentPane.add( showJPanel );
//sets up a JPanel
helpJPanel = new JPanel();
helpJPanel.setBounds( 16,16, 560, 375 );
helpJPanel.setBorder(
new TitledBorder( "HELP DETAILS:" ) );
helpJPanel.setLayout( null );
helpJPanel.setVisible(false);
contentPane.add( helpJPanel );
//creates a newJLabel
deJLabel= new JLabel();
deJLabel.setBounds( 23, 390, 530, 35 );
deJLabel.setText("Details:");
contentPane.add( deJLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds( 25, 100, 530, 35 );
de1JLabel.setText("You are about to start the reaction test, when you " +
"press the start button it will begin.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds(160, 145, 530, 35 );
de1JLabel.setText("Simply catch the moving item and click.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de2JLabel= new JLabel();
de2JLabel.setBounds( 20, 380, 70, 35 );
de2JLabel.setText("Details:");
helpJPanel.add( de2JLabel);
//creates a JButton
startTestJButton = new JButton();
startTestJButton.setBounds( 185, 205, 180, 60 );
startTestJButton.setText( "START" );
startTestJButton.setBackground( Color.YELLOW );
helpJPanel.add( startTestJButton );
startTestJButton.setEnabled(true);
startTestJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
startTest();
//sets up an animation panel
testJPanel = new ShapeMovingPanel(this);
testJPanel.setBounds( 16,16, 560, 375 );
testJPanel.setBorder(new TitledBorder("Click the moving object:"));
testJPanel.setLayout( null );
testJPanel.setVisible(false);
contentPane.add( testJPanel );
// this is causing the animation to appear uneven
// you can try the app with and without this to see
// testJPanel.addMouseMotionListener(this);
//creates a newJLabel
timeJLabel = new JLabel();
timeJLabel.setBounds( 440, 330, 100, 35 );
timeJLabel.setText("Time:");
testJPanel.add( timeJLabel );
//creates a new JTextField
timerJTextField = new JTextField();
timerJTextField.setBounds( 480, 335, 60, 24 );
timerJTextField.setText(String.valueOf(timeLimit));
timerJTextField.setHorizontalAlignment(JTextField.CENTER );
timerJTextField.setEditable(false);
timerJTextField.setBackground( Color.YELLOW );
testJPanel.add( timerJTextField );
resultsJPanel = new JPanel();
resultsJPanel.setBounds( 16,16, 560, 375 );
resultsJPanel.setBorder(new TitledBorder("HERE ARE YOUR RESULTS:"));
resultsJPanel.setLayout( null );
resultsJPanel.setVisible(false);
contentPane.add( resultsJPanel );
de3JLabel= new JLabel();
de3JLabel.setBounds(20, 200, 530, 35 );
de3JLabel.setText("Below is also the movements you made with your mouse, " +
"you may exit the program now.");
resultsJPanel.add( de3JLabel);
de4JLabel= new JLabel();
de4JLabel.setBounds(135, 245, 530, 35 );
de4JLabel.setText("Thank you for trying the Reaction Testing program");
resultsJPanel.add( de4JLabel);
//creates a newJLabel
nameResultJLabel= new JLabel();
nameResultJLabel.setBounds( 62, 55, 50, 35 );
nameResultJLabel.setText("Name:");
resultsJPanel.add( nameResultJLabel);
//creates a new JTextField
nameResultJTextField = new JTextField();
nameResultJTextField.setBounds( 140, 55, 300, 24 );
resultsJPanel.add( nameResultJTextField );
nameResultJTextField.setEditable(false);
//creates a newJLabel
ageResultJLabel = new JLabel();
ageResultJLabel.setBounds( 62, 90, 100, 35 );
ageResultJLabel.setText("Age:");
resultsJPanel.add( ageResultJLabel );
//creates a new JTextField
ageResultsJTextField = new JTextField();
ageResultsJTextField.setBounds( 140, 90, 300, 24 );
resultsJPanel.add( ageResultsJTextField );
ageResultsJTextField.setEditable(false);
//creates a newJLabel
timeResultsJLabel = new JLabel();
timeResultsJLabel.setBounds( 62, 125, 100, 35 );
timeResultsJLabel.setText("Time taken:");
resultsJPanel.add( timeResultsJLabel );
//creates a new JTextField
timeResultsJTextField = new JTextField();
timeResultsJTextField.setBounds( 140, 125, 300, 24 );
resultsJPanel.add( timeResultsJTextField );
timeResultsJTextField.setEditable(false);
//creates a newJLabel
ratingJLabel = new JLabel();
ratingJLabel.setBounds( 62, 160, 100, 35 );
ratingJLabel.setText("Your Rating:");
resultsJPanel.add( ratingJLabel );
ratingJTextField = new JTextField();
ratingJTextField.setBounds( 140, 160, 300, 24 );
resultsJPanel.add( ratingJTextField );
ratingJTextField.setEditable(false);
//creates a JButton
exitJButton = new JButton();
exitJButton.setBounds( 235, 310, 90, 24 );
exitJButton.setText( "Exit" );
exitJButton.setBackground( Color.WHITE );
resultsJPanel.add( exitJButton );
exitJButton.setEnabled(true);
exitJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when exitJButton is pressed
public void actionPerformed( ActionEvent event )
System.exit(0); //closes the programme
}); // end anonymous inner class
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// set properties of application's window
setTitle( "Reaction Tester - CMT3991" ); // set JFrame's title bar string
//setSize( 1280,995 ); // set width and height of JFrame
setSize( 608, 650 ); // set width and height of JFrame
setVisible( true ); // display JFrame on screen
//** set up of method main */
public static void main( String[] args )
RT application = new RT();
application.setDefaultCloseOperation( EXIT_ON_CLOSE );
} // end method main
private void Login()
try
name = nameJTextField.getText();
age = Integer.parseInt(ageJTextField.getText());
startJPanel.setVisible(false);
showJPanel.setVisible(false);
helpJPanel.setVisible(true);
infoJTextArea.setText("\n Welcome "+name+" you will soon know how " +
"fast your reactions are");
catch (NumberFormatException exception)
JOptionPane.showMessageDialog(this,
"There is either a blank field or a number hasn't been entered",
"Input Type error", JOptionPane.ERROR_MESSAGE);
//shows this is something has been entered wrong
private void startTest()
helpJPanel.setVisible(false);
shape = shapes[seed.nextInt(shapes.length)];
testJPanel.setShape(shape);
testJPanel.setVisible(true);
testJPanel.start();
startTime = System.currentTimeMillis();
infoJTextArea.setText("");
* called by animation panel after shape is clicked
public void stop()
endTime = System.currentTimeMillis();
movingObject();
* called by timer actionPerformed in ShapeMovingPanel
public void updateTime()
long timeNow = System.currentTimeMillis();
double elapsed = (timeNow - startTime)/1000.0;
timerJTextField.setText(timeDec.format(elapsed));
* this will compete with your animation
* ie, it will slow it down or make it appear jerky
public void mouseMoved(MouseEvent e)
saySomething("\n Mouse moved", e);
public void mouseDragged(MouseEvent e)
saySomething("\n Mouse dragged", e);
void saySomething(String eventDescription, MouseEvent e)
infoJTextArea.append(eventDescription
+ " (" + e.getX() + "," + e.getY() + ")");
infoJTextArea.setCaretPosition(infoJTextArea.getDocument().getLength());
private void movingObject()
testJPanel.setVisible(false);
resultsJPanel.setVisible(true);
nameResultJTextField.setText(name);
ageResultsJTextField.setText(String.valueOf(age)+" years old");
double elapsedTime = (endTime - startTime)/1000.0;
timeLimit = (int)elapsedTime;
timeResultsJTextField.setText(timeDec.format(elapsedTime)+" seconds");
String mouse = infoJTextArea.getText();
String tick = timeDec.format(elapsedTime);
try
// create a file called welch.txt
final FileWriter outputFile = new FileWriter(name+".txt", true);
final BufferedWriter outputBuffer = new BufferedWriter(outputFile);
// converts data to a formatted string
final PrintWriter printstream = new PrintWriter(outputBuffer);
printstream.println("The person's name is: "+name);
printstream.println("There age is: "+age);
printstream.println("Time taken: "+tick+" seconds");
printstream.println("The mouse moved as follows: "+mouse);
//states what needs to be printed to the new file
printstream.close(); // closes teh printstream
catch(IOException eio)
//catchs the IO exception
if(timeLimit<5)
ratingJTextField.setText("Thierry Henry");
if(timeLimit>5)
ratingJTextField.setText("Average");
if(timeLimit>10)
ratingJTextField.setText("You gotta be fat or something");
if(timeLimit>20)
ratingJTextField.setText("See a doctor");
String rate=ratingJTextField.getText();
private void showData()
// String results = "";
// infoJTextArea.setText("Here are your results:\n"+results);
startJPanel.setVisible(false);
showJPanel.setVisible(true);
class ShapeMovingPanel extends JPanel implements ActionListener
RT host;
Timer timer;
Shape shape, xformed;
int x, y, dx, dy;
public ShapeMovingPanel(RT rt)
host = rt;
timer = new Timer(25, this);
x = 0;
y = 0;
dx = 2;
dy = 3;
setBackground(Color.pink);
addMouseListener(new ShapeTender());
public void actionPerformed(ActionEvent e)
int w = getWidth();
int h = getHeight();
if(w <= 0 || h <= 0)
return;
checkBoundries(w,h);
x += dx;
y += dy;
repaint();
// update RT.timerJTextField
host.updateTime();
private void checkBoundries(int w, int h)
Rectangle r = xformed.getBounds();
Insets insets = getInsets();
if(r.x + dx < insets.left || r.x + r.width + dx > w - insets.right)
dx *= -1;
if(r.y + dy < insets.top || r.y + r.height + dy > h - insets.bottom)
dy *= -1;
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
AffineTransform at = AffineTransform.getTranslateInstance(x, y);
g2.setPaint(Color.red);
xformed = at.createTransformedShape(shape);
g2.draw(xformed);
public void start()
if(!timer.isRunning())
timer.start();
public void setShape(Shape s)
shape = s;
Rectangle r = shape.getBounds();
x = r.x;
y = r.y;
repaint();
private class ShapeTender extends MouseAdapter
public void mousePressed(MouseEvent e)
if(xformed.contains(e.getPoint()))
timer.stop();
host.stop();
} -
Need some help with Slow Downs in Java3D and Servlets
Hi,
I realize that there is a separate forum for Java 3D, but I posted there, and did not get any response. This is kinda the crux of my program, so I would like to invite anybody on this forum with knowledge of Java 3D and servlets to give it a stab. Between this post and that one, there are TWENTY duke dollars up for grabs.
Thanks.
http://forum.java.sun.com/thread.jspa?threadID=603198Let me have an educated guess.
You calculated the time elapsed before sending in a server request - and at that point you have you updated timeLastStateChange yet, which means by the time of the next calculation of time elapsed this apparent delay is not counted in, hence the slow down in animation rate.
Hope this helps~
Alex Lam S.L. -
Photoshop CC slows down suddenly, for several minutes
Hi!
I have a problem with Photoshop CC. I sit on a 27" iMac, 8GB RAM and an i5 processor, OS X Mavericks, Wacom intuos Pro tablet.
My problem, that suddenly occurs is tha Photoshop CC suddenly slows down to a halt. No error messages, it just gets very very slow. The first sign is that I suddenly cant zoom. I try to zoom, and nothing happens. Then the cursor, still able to move around with no problem, wont change to an arrow when hovering over buttons or menu items. If I open Safari, everything works fine, exept if I go back to Photoshop, then only the properties window will show. Photoshop is like this for up to ten minutes, then suddenly everything happens at once. All the zooming, closing of images if I tried that (with the keyboard), and then it is all fine again.
The problem occurs both when I do complex work with many layers, but also when doing simpler work with just a few layers.
I have 850GB free storage space and Photoshop is allowed to use 5GB of RAM. I usually dont have open more than two pictures at once. I use Lightroom 5, and PS CC as an external editor.
Any ideas how to solve this? It does sound like PS is writing alot to the HD sometimes, but it should not get this slow anyway, and the program does not freeze as in software error. I dont need to force quit PS, I just need to wait it out. Very annoying!
Sorry for my bad English! It is not my first languageTells us a bit more about the work you are doing:
How many layers?
What types of layers? Shape? Text? etc.
Document dimensions?
Bit depth?
File size on disk?
Also, tell us a little about how things are set up:
Where is your scratch disk?
How much free space on that disk?
How much RAM? -
My mid 2011 MacBook Air has slowed down significantly overnight?
Last night my MacBook Air was working fine.
When I went to use it this morning, it has slowed down significantly. It takes awhile for it to respond to trackpad movement or the keyboard. Opening finder is delayed now, opening any app is delayed now. Booting it back up takes extra long now, probably around a minute compared to thirty seconds before.
I've tried an SMC reset, repairing the disk and repairing disk permissions.
From what I can see, the hardware doesn't appear to be failing, but I could be wrong.
Can anyone help me out? What could possibly be going on with my MacBook? How did this happen overnight?Your MacBook Air's memory is not upgradable, and as you already determined unused storage capacity is not a relevant factor.
There are many reasons a Mac may be performing slower than expected.
Back up your documents and everything else important to you before proceeding.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
To identify potential hardware problems: Apple Hardware Test. -
My mid 2011 MacBook Air fell off my couch onto carpet. Slowed down.
I made a post a few weeks ago about how my mid 2011 MacBook Air slowed down randomly over night. A few days later it randomly started functioning properly again. I was stoked.
Today, I was using my MacBook on the couch, when it slipped off and landed on the carpet bottom up with the lid closed.
The moment I opened it up again, it was back to being slow again.
I ran the Disk Utility, tried repairing it, it said that the hard drive 'appeared to be ok'
But yeah. I'm gonna say it's a pretty safe to assume that the drop has everything to do with the slow response time.
Would anyone happen to know what actually might have went wrong, though?I would think a poor connection of some sort, may be a plug and socket or a soldered joint problem. I think you need to take it in for repair, I cannot think it will be software that is causing the fault, but...... you never know.
-
New Mac has slowed down dramatically
My mac is only a few weeks old and I have noticed that it has slowed down dramatically. It takes quite awhile for programs to load. The fill-in boxes are not keeping up with my typing and it is getting quite annoying. I am new to Imac, so I am not sure how to go about checking the processing speed, etc. Any help would be appreciated.
Check out this thread:
http://discussions.apple.com/thread.jspa?messageID=7114123 -
Internet speeds keep slowing down to a crawl
I'm having a problem that has only developed in the past week which was during a time when I haven't changed any configurations in that period of time since my son was born a week ago yesterday and I obviously had more important things to do than mess with my network configurations. However, about 2 weeks prior to his birth, in the process of configuring a baby monitoring system with icam source, 3 weeks or so ago, I read that I might be able to improve my internet performance, I ran googles namebench a couple of times and added and re-ordered the DNS servers that had been listed prior to any problems developing based on its' reports. My internet speeds improved as a result of changing those DNS settings and stayed good until the past week. But of course, we now need to use the computer as part of our baby monitoring system and it's not working worth a **** and I'm getting frustrated since I can't put my finger on the problem and I don't really have time to spin around in circles right now. I'm sure it's probably something simple and I can't put my finger on it though. Sleep deprivation is new to me.......
I've kept running log of notes so this is a little deshoveled but I figured the more information I provide the better the chance someone might help me get this solved quickly.
In the last week, since my sons birth, my internet speeds would be okay after restarts and resetting everything, 2.5 Mbps or so but after a 10-15 minutes it starts to slow down to .2-.3 Mbps. I went thru all my network settings, restarted everything, repaired permissions, I've changed ethernet cables reset PRAM, firewall is running, stealth mode enabled, allow signed software incoming connections and my various other programs such as netsessionmac4f3c6b, skype, java, itunes, etc.
All sharing services off and pretty basic login items at startup including growl.
I had AT&T come out and check my DSL line and everything checked out on their end up to and out of the DSL modem based in their equipment tests.
The problem seems to start when I connect my imac (a fairly loaded 27" imac I got in Dec.) First off, as soon as the imac is connected to the modem via ethernet, the old ethernet modem flashes and continues to flash, even right after startup. So the tech thought something was running in the background and I can't figure out what. I looked through login items but don't see anything that would be a problem and am afraid to eliminate everything.
So I created a guest account to eliminate any login items (I think) and in I got 5.69 Mbps right off the bat. But after a minute or two, without changing anything my download speed slows down and I get for example .77 Mbps. The same thing happens with my administrator account on the imac. Fast speeds at startup and more importantly if I change the configuration by switching between ethernet and airport, I get fast speeds right after changing the configuration but after a minute or two I am well below 1.0 Mbps. I've got several network configurations with automatic, airport and ethernet set up in different ways including a clean ethernet connection with the original DNS settings.
I haven't set up an airport only account but that really isn't the way I want to hook up the computer that sits right next to the modem and runs my network. Restarting the old modem and direct connecting the computer to the modem results in the same thing happening.
I connected my ethernet from the (old?) modem directly to my ancient powerbook G4 and I got +5.6 Mbps download but it also slowed down to 300 kbps after 5 minutes or so the first time (old modem?)
Now to explain why I have "old?" listed above. I was then able to get a new DSL modem from AT&T, hook it up just fine, get enormously faster internet service in the 5,000 kbps only to have it slow back down to around 300 kpbs after connected for several minutes.
directly connected to imac-bypassing router
3,500 kbps
after 15 minutes-250 kbps
connected to imac thru router/time capsule with airport extreme
2500 kbps
after 15 minutes=166 kbps
directly connected to an older powerbook G4 with new modem
IP address of 192.168.1.64
5.65 Mbps on speedtest
after 15 minutes=5.67 Mbps
after 30 minutes= 5.59 Mbps
1 hour-5.66 Mbps
Very solid, stable readings for what I am used to. This would seem to isolate the problem to the imac.
directly connected to imac with new modem
IP address of 192.168.1.64
5.8 Mbps on speedtest
after 30 minutes= .60 Mbps-ping takes 250 ms
1 hour= .46 Mbps-ping takes 250 ms
Now a problem that only started last night after I hooked up the new modem and started up my old Time capsule/airport configuration, I got a message that said something to effect of "another device on this network is using computer IP address 192.168.1.64. So I tried manually changing last digit of the IP address on the computer to one number higher and it kept saying the start and end range were incorrect so I shut the airport station down since when it was connected, it would not allow the computer to connect thru the router via ethernet. I did a hard reset on the airport and I got it back up and running just fine but the internet speeds on the imacs' ethernet connections are so slow it's practically worthless. I also checked to see what was connected to my airport on any given occasion, 2 iphones, 2 pads, another imac running upstairs and a newer powerbook running icam source that is supposed to be the baby monitor. Except for the laptop everything can use "802.11n" but the powerbook only connects via 802.11g so I have set the airport to that limiting setting.
Any suggestions? Is there a way for me to log what is happening so I can report in more detail?First thing is to check if the wireless is on a sensible channel: HomeHub doesn't always make sensible choices. Install inSSIDer on your laptop and see what other devices there are around and if there is any clash. Also, try moving the HomeHub around a little, even quite small differences can make a big difference to wireless signals.
You could run an ethernet cable from downstairs to upstairs. Easy to do, but can be a bit unsightly. If most of your devices are upstairs, you could use this cable to connect the modem to the HomeHub. If you have devices both up and down, you may want to keep the HomeHub downstairs and add a switch upstairs.
HomePlug may be suitable for you. If you search Amazon for HomePlug you will see a couple of kits for just over £30. Don't go for an 85Mbps one. A 200Mbps such as the TP-link or D-Link should be much better than wireless, but not as good as a cable.
Depending excatly how many devices you want to connect and where, you can pay more and have a builtin wireless at one end: http://www.amazon.co.uk/Devolo-1408-Wireless-N-HomePlug-Adapter/dp/B00472MMCQ/ref=sr_1_15?ie=UTF8&qi... Or it may be best for you to use the basic devices and add an old wireless router in switch mode. -
I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?
The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter.
Maybe you are looking for
-
AirPort no longer working with Comcast
I have had my Airport Extreme, working great with my cable modem for the last year, but a few night ago it decided to stop working. I get a error that it can not get a IP address. If I wire direct from the cable to my imac the cable works fine. If I
-
in need of help..i accidentally inserted my SD in the cd drive,does it will affect my computer system and function?
-
How to stop ActionEvent for a button
Hi, I have a button "Start". On clicking the button, it will ask with a prompt "You really want to start" with Yes and No button. On clicking Yes button, the "Start" button is changed to "Cancel Stat..." and start running a process. If want to stop t
-
HT4847 how to store pdf files on iCloud ?
how to store pdf files on iCloud ?
-
Dear all, in the following code i want to cmpare the database user with the user in my table. here is a problem when i connect with the user which name is stored in upper case in table its okey. but when i login with a user which name is store in low