FCPX clip audio does not export, "Jingles" do.

When exporting my project from FCPX to Quicktime, the audio from my clips does not import but the jingles I used from the FCP media library do export.
I get "Quicktime error: -50"
I do have the audio portions of the clips overlapping each other. Maybe this is why?
Could it be an issue of permissions? I ran disk permissions.
Thanks,
Grace

Sys prefs Sound -> Output -> Internal Speakers... Built-in // Settings for selected device: The selected device has no output controls // Output volume: (slider)
When headphones in, Sys prefs Sound -> Output -> Headphones ... Headphone port // Settings for the selected device: Balance: (slider left-right) // Output volume: (slider)
Channel configs:
Media specs: Apple HDV 1080i60, 1440 x 1080, 16-bit integer (Big Endian), Stereo (L R), 48.000kHz
- Tisha

Similar Messages

Audio Does not export with ideo in quicktime conversion

I know i did something with a keyboard shortcut during the editing process, but i cant figure out what i did and how to change it back. What my issue is that when i try to export it to any format in quicktime (in quicktime conversion) the video is ok, but my audio does not export at all.
I dont know what went wrong but i should note i pressed something on my timeline that i didnt realize what it did. Its hard to explain what it looks like, when you press on different clips all the clips on my time line quickly turn a more silver/light color and then change back to the normal color(not effecting the video quality just the thumbnails). But it is has a weird color
is there a way i can reset all settings without adjusting my video clips?
Sound settings
Format: Lubear OCM
Channels: Stereo (L R)
Rate: 48.0000 hHz
Render Settings:
Quality: Normal
Linear PCM Settings:
Sample Size: 16 bits
Checked: Little Endian

Hi(Bonjour)!
Does the audio play when you run sequence?
Did you toggle off the monitor icon at the left side of timeline for audio track?
When export to quicktime conversion, select quicktime movie and click OPTION.
From this point, you should see a checkbox for SOUND. Be sure to check it ON.
Michel Boissonneault

Using GB'08 to create Chapters for iMovie'08 -- audio does not export

After fighting though learning Final Cut Express (oops I mean iMovie '08), I got a movie together. Then I wanted chapters, so I found a great article (http://imovie08.blogspot.com/2007/08/how-to-add-chapter-markers.html) showing that the only way to make them in a logical way was via GarageBand'08.
However, when I send the movie to iDVD, the audio does not make it (silent when I play the movie - either in preview mode or on the burned disc). Furthermore, I tried to "Export Movie to Disk" to see if GB was not outputting or if it was an iDVD issue of receiving. I found that the export also came over with no audio.
Please advise!

I am having the same exact problem. I have Final Cut Pro on my production computer at work, but I wanted to do some personal stuff at home on my MB Pro. I have like 15 old family 8mm home videos that I want to convert to DVD's for my parents for Christmas, so I used some of my hardware for A to D conversion to get these marathon 2 hour movies on my ext. Hard Drive. But of course you can't make chapter markers in the new iMovie '08, so I have to export to "media browser" and then switch to GarageBand to do this simple task. But unfortunately when I "share" from GarageBand to iDVD, disk, or even iTunes I get absolutely no audio. Ridiculous.
Not to mention the fact that these home videos are two hours long and it takes a freakin hour for it to compress/export just to find out there's an issue. And even before I realized there was no audio, I was having an amazingly awesome time in iDVD as it was lagging so badly that I considered putting my TV on to pass the time while I clicked and held on one of the folders waiting for it to highlight so I could move it. Then it was great to find out that all that time I spent in iDVD was in vain because there was no audio on the movies anyways!!!! yaaayyyy!!!
Obviously other people have presented this same GarageBand movie sharing audio issue and have received no good solutions as of yet, so I don't even know why I'm here posting this. It's 4:00 AM, and I've been fussing with this crap for over 8 hours now. I'm just going to do it all at work on more capable software (Final Cut, DVD Studio).
I just figured that I didn't have to do anything special to these home-videos editing-wise, why not just take advantage of my "cool" new iLife software? And do it on my spare time at home? Why not? Because they've made iLife so retard-proof that it's self destructing before my very tired eyes.
iLife? more like cryLife.

Premiere CS6 - MXF export with 8 channel audio does not export my audio channels correctly

Hey Volks,
when i try to export an mxf file with 8 channel audio, premiere does a kind of main mix in channel 1 and 2 and channel 3 to 8 remain silent. It does not include my assignment of audio channels in the mxf file.
im very thankful for any idea...

Hi Dast Media,
Have you resolve the multi channel export?
I have the same problem...(the export it's ok but i hear only the first two tracks)
i need to export a MXF file with 8 tracks, 6 stereo and 2 mono.
Thank you for help!

Can't hear audio on FCPX except thru earphones; audio does not export.

Clips have audio through my headphones, but not otherwise (no problem with audio in other programs).
Sometimes I can hear bits of audio when I scrub, but it's inconsistent.
Exported video also has no audio.
I'm on a very new Mac Mini running Lion OSX 10.7.4.
No, the headphones are not still plugged in while I'm trying to hear it normally.
Thanks for any advice...
Tisha

Sys prefs Sound -> Output -> Internal Speakers... Built-in // Settings for selected device: The selected device has no output controls // Output volume: (slider)
When headphones in, Sys prefs Sound -> Output -> Headphones ... Headphone port // Settings for the selected device: Balance: (slider left-right) // Output volume: (slider)
Channel configs:
Media specs: Apple HDV 1080i60, 1440 x 1080, 16-bit integer (Big Endian), Stereo (L R), 48.000kHz
- Tisha

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

Audio does not fit with video FCPX 10.1.3

Hi, I have a little bit unusual (at least for me) problem. I have old video from camera (maybe 20 years) on my HDD and I would like to edit it. Problem is the audio does not fit with video - when somebody talks it is apparently delayed. Can you give me a hint how to fix it in FCPX? I tried to detach audio and move just audio line but it is not possible.
Thanks

I tried it again from the beginning and now I can move audio to the right. I would just need to move video to the right, so audio stays still.. I need to delay audio so one option is to delete part of beginning of audio track or somehow move video to the right but it is not possible, i guess video track in the beginning cannot be empty....
It is difficult to explain

CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
Jeremy

I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck!

Exporting does not export the music tracks.

hello- i am needing help exporting my movies from Adobe Premiere Pro 2014. When i try to export a movie, it does not export the music tracks. the audio is fine, but it is not exporting the music beds. any ideas as to why would be VERY helpful! thank you!
==============================================
Edited by moderator to trim the title down to the essential.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

My audio does not work on my pavilion dv4. i just bought this laptop a few days ago. what's going on

my audio does not work on my pavilion dv4

This worked for me.
Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences/com.apple.dashboard.plist. Move the .plist to your desktop.
Log out/in
If it works, delete the .plist on your desktop.
If the same, return the .plist to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

My Facetime audio does not work on my MacBook

My Facetime audio does not work on my MacBook, video is fine. Volume set to max, internal mic is "on", mute is 'off'. Advise

While we all have MacBooks in this forum not all of us use FaceTime. There's a FaceTime Support Community where everybody uses FaceTime. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_app_store/facetime_for_mac

I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

Hi pgrillo,
I'm sorry that you're disappointed with your ExportPDF subscription. I checked your account, and see that the order is still processing. As such, I'm unable to cancel it for you myself. However, a Customer Care agent can take care of your cancelation/refund quickly. Here is the contact information: Contact Customer Care. Click Still Need Help? Contact Us at the bottom of the page to find both phone and chat support options.
Best,
Sara

Devanagari font in layed out in Indesign (using IndicPlus) does not export correctly to a PDF.

Namaste InDesign gurus,
I have a problem at hand. Wondering if anyone has encoutered similar problem before? Any help is greatly appreciated. And if you're in San Francisco bay area - I can buy you a lunch :-)
Short description: Devanagari font in layed out in Indesign (using IndicPlus) does not export correctly to a PDF. All the ligatures are assembled and displayed in the PDF.
Adobe Indesign Version: InDesign CS5 Design Premium - regular U.S. version (not ME).
Steps I took:
I purchased CS5 Design Premium and also purchased the IndicPlus plugin to author sanskrit documents in InDesign. I create Sanskrit text using either of the following methods.
1) Itranslator
2) Paste the devanagari from the Itranslator directly into InDesign or paste it first into MSWord and then copy from MSWord and paste it to Indesign.
It doesn't matter how I paste it. After I apply the IndicPlus character/paragraph style so that the sanskrit looks good in InDesign, when I try to export it to a PDF. The PDF does not display the ligatures currectly. It just lists all the characters in order without assembling.
I've spent a lot of money buying CS5, IndicPlus and then I can't even create a simple PDF document from InDesign. It is very frustrating.
Has anyone been able to successfully export a sanscrit document from InDesign PDF ?
(Please let me know if my problem description needs more fleshing out).
I could create the PDF from MSWord directly but I'm trying to use indesign to layout my book. If InDesign cannot export to PDF I'll just have to use MSWord for my book layout. I've spend probably scores of hours trying to learn InDeisn and formatting my book content - seems like it is all going to be waste.
Is MSWord the best choice or only choice for laying out books that have sanskrit text in them?
-Ravi

Has anyone been able to successfully export a sanscrit document from InDesign PDF ?
Not Sanskrit, no, but plenty of Hindi, Nepali, Marathi, and other languages written in Devanagari script - so it should be possible. I don't even use IndicPlus, which by most accounts makes working with Indic text much easier.
1) Itranslator
I've never seen this, but a quick Google led me to the homepage of ITranslator for Windows, where I saw this:
Itranslator 99 (Build 1.3.0.86) & New Beta Version
uses 8-bit true type fonts and is compatible
with Windows 95/98/ME/NT/2000/XP.
For more information, click here.
Itranslator 2003 (Build 2.0.0.38) & New Beta Version
uses 16-bit Unicode-compatible fonts and is working
only on Windows 2000 / XP / Server 2003.
For more information, click here.
So, if you're using ITranslator 99, there's the problem - those "8-bit true type fonts" won't work in InDesign. Can you post a sample of the text you're trying to paste into InDesign? Name the font(s) you are using, both in Word and in Indesign, and if possible make a small sample of the text available for us to test. It's also possible that InDesign is using a substituted font, which could cause this problem. So, if the font name in InDesign has brackets around it, you know that InDesign doesn't actually have that font installed and is auto-substituting. Also, if you go to View -> Screen Mode -> Normal and the text is highlighted pink, you know that the font has dropped. (Unless the highlighting for dropped fonts was turned off - check in Edit -> Preferences -> Composition and make sure that "Substituted Fonts" is checked.
Also, for what it's worth, is there any way you could Place your text instead of copying and pasting? This may be cause of your problem - but even though it probably isn't, it's still worth a try.
Lastly - no, I've found InDesign to be superior for typesetting for almost all languages, but the learning curve is pretty steep, and many of the problems faced by people working in non-English languages are not easy to research when you have a problem.

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

I use the CS6 suite with Acrobat XI at windows platform.
When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
What is the reason of this bug?
Before with Acrobat X this worked without problems

Hi Rob,
I was told the new way to work would be to draw files via Bridge direct into the InDesign file
and I thought automatically the color would not be changed.
my colourmanagement setting in bridge for the whole CS6 was ECI isocoated_V2_300
The Illustrator file was saved without color profile.
In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
“e.V.” was set to 100 % k
I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
no color conversion
convert to profile
convert to profile keeping existing values
in all tree files the pirates background has 322 % ink coverage instead of 291 %
Why does Acrobat convert “black” in the wrong way? If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
The same happens also by saving as .pdf X3 or .X1
The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
I also made test with the new ECI profiles for laminated prints from 2012.
And with newspaper profiles
In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
And then the 100 % k converts to cmyk, what I don’t want to have with text.
Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
enclosed you find my files
Kind regards
Lutz Hanbueckers
Hanbueckers Werbung GmbH
Brandsackerstr. 5
40764 Langenfeld
P.O. Box 40 02 01
40242 Düsseldorf
Tel. +49 02173 1 09 44 - 0
Fax +49 02173 1 09 44 - 10
[email protected] <mailto:[email protected]>
www.hanbueckers.de
Visit our site
Steady attractive offers!!!
HR Düsseldorf B 26 480
owner Manager: Lutz Hanbueckers
Von: Rob Day [email protected]
Gesendet: Samstag, 2. März 2013 04:26
An: Hanbueckers Werbung
Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

FCPX clip audio does not export, "Jingles" do.

Similar Messages

Maybe you are looking for