FCPX crashes all the time using the Intensity Pro Card for monitor preview wassup?

I have been using FCPX for a few months and I like it somewhat and could really love it for it not crashing on all my projects. If I scrub the timeline or apply a filter it crashes. I'm using the Blackmagic Intensity Pro card for monitor output and the latest drivers that they put out and can't really get through a project because it crashes all the time.I thought that if i get a different display card it would possible help I have the GForce 120 card which only has 256MB ram.Can anybody put some light on the issue?

FCP X currently does not support Intensity Pro cards.
Andy

Similar Messages

  • Premiere crashing. Using Blackmagic Intensity Pro HDV sequence

    Hi. I'm editing with Premiere. I'm using an intensity pro card(blackmagic design) with
    Q4000 Nvidia Graphics card. It keeps crashing on me. More so with the HDV footage I'm editing.
    I have included my computer specs as well as media info of my source footage and the sequence settings.
    Any help with this would be much appreciated!!!

    I checked your PSU based on your list of components and it gave me these results:
    These figures are without any safety margin. I usually advise to add around 10% for safety. If I look at your PSU, it shows these data:
    This tells me that your +5V rail may be a weak point because of the lacking amperage with this PSU and worth checking. Your system needs a combined wattage of nearly 190 W but delivers only 150 W on the +3.3 and +5V rails. This also shows that it will be hard to make this a more balanced system with better disk I/O, because the wattage is just not enough to add a dedicated raid controller and some more disks. I would not be surprised if the PSU is the culprit here, but let your IT guy check this out. And let him carefully check the temps of CPU, mobo and GPU, both idle and under load.
    A good disk setup for a balanced system with such a powerful CPU would be something like described in the 'Warrior' system here: Adobe Forums: What PC to build? An update...

  • Soundtrack Pro with Blackmagic Intensity Pro Card

    Hi
    Just wondering if anyone was using STP with the Blackmagic Intensity Pro card to monitor video on a TV?
    If so, whta are your experiences and especially does STP allow you to continue using your selected audio device (MOTU Ultralite over Firewire for me) while viewing your Quicktimes on the TV.
    Thanks in advance
    Gavin
    gavin little
    echolab
    dublin, ireland
    http://www.echolab.tv/
    http://www.imdb.com/name/nm1962022/

    Hey Bill
    Thanks for getting back so quick! No, I've checked the audio/midi and the default audio device is my MOTU Ultralite firewire interface - even when the default output is set to the mac's internal speaker, once you select the external video it mutes the output.
    I can still see levels withing STP as if the audio is playing. There is an official Apple Support document about audio not working when you are using external video to firewire and it says that it is a bug that can be bypassed by setting your bus to surround (1-6) instead of stereo (1-2) but this has no effect for me )-:
    Would love to know if it works for you! and if so, what way you have things configured
    Thanks
    gavin little
    echolab
    dublin, ireland
    http://www.echolab.tv/
    http://www.imdb.com/name/nm1962022/

  • I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so slow that I wind up having to crash and restart most of the time.  This is true regardless of the app I am using at the time.  The specs of th

    I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so unresponsive that I wind up having to crash and restart most of the time.  This is true regardless of the app I am using at the time.
    The specs of this iMac are:
    iMac 27 inch, late 2009 model with a 3.0 GHz Intel Core 2 Duo with 4 Gig 1067 Mhz DDR3, using OSX Lion 10.7.4 (11E53)
    I have Mackeeper installed and according to the scans I have run, everything is fine. No virus, no junk files . . . no problems at all . . .
    Except that for all practical purposes, my computer isn't working. 
    I am nearly totally deaf and live in an isolated, rural area of NW Missouri and this computer is what I mainly rely on to contact friends, relatives and business associtates!
    Any and all suggestions will be greatly appreciated!

    First, back up all data immediately, as your boot drive may be failing.
    If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
    If iCloud is enabled, disable it.
    Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Step 2
    You must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

  • I use floating time zone with all of my iCal entries.  But then the times of the entries do not print when printing month view.  Is there a fix for this?

    I use floating time zone with all of my iCal entries.  But then the times of the entries do not print when printing month view.  Is there a fix for this?

    Sorry to have repeated this question as if I were answering it.  Just a mistake.  I'm just now learning how to use this site.

  • I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

    I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

    . Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
    Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
    See:                  Keywords or ratings are applied only to one of the selected images - why?
    Uncheck the little square button with the "1".

  • For the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

    for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

    If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
    http://concierge.apple.com/reservation/us/en/

  • When I copy and paste from one source material to another  within adobe reader, all the words are in one sentence. I have to take extra time to separate  the words using the space bar. Can this be fix?

    When I copy and paste from one source material to another  within adobe reader, all the words are in one sentence. I have to take extra time to separate  the words using the space bar. Can this be fix?

    Hi Bernie,
    Are you trying to copy and paste from a pdf to another pdf?
    Regards,
    Rave

  • All the time using password it's say "wrong password. It a get a new one on the ipad2 do a new one it's "wrong password" Help me please

    All the time using password it's say "wrong password. It a get a new one on the ipad2 do a new one it's "wrong password" Help me please

    Is this with your iTunes account password ? If so, and if you haven't already done so, then try logging out of your account by tapping on it in Settings > Store and then log back in and see if that fixes it.

  • HT201263 my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

    my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

    You may want to look at this about using recovery mode to restore your iPad.
    http://support.apple.com/kb/ht4097

  • Restore using Time Machine to new hard drive, but last "full" backup was 2012.  how do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user?

    Restore using Time Machine to new hard drive, but last "full" backup was in 2012.  How do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user? 
    I entered Iphoto for my user and only photo up until 2012 were in the library.  I thought the restore would do the incremental Time Machine backups too.....
    Running 10.8.2

    It usually means you are running Mavericks but have an earlier version of iPhoto. Open the App Store and upgrade your version of iPhoto to the Mavericks version.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
    iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

  • Hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive?

    hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive? please help for i only have around 618mb left out of 189GB!!!!!!!!!!!!!!!!

    If what doesn't work?
    If cloning your internal drive to the external drive is not successful, I expect CCC will tell you so. Assuming that doesn't happen, you will have a bootable replica of the internal drive on the external drive once CCC has finished.
    You can then do any of several things:
    1. Replace your internal drive with a much larger one (320GB or 500GB, or even larger), and clone the external drive's contents onto the new drive so you'll have all your data in one place. Note that if you do this, you'll also need to buy an external drive that's large enough to back the new internal drive up on.
    2. Boot from the external drive as a temporary measure while you clear at least 30-40GB of data off the internal drive, allowing you to keep using it and saving small amounts of data to it. The external drive will then contain the only copies of the files you've deleted from the internal drive, so you'll need a seond external drive large enough to back both the other drives up on.
    If you can't comfortably clear a minimum of 30GB off the internal drive, you really need a larger internal drive right now, and you shouldn't bother fooling around with the inadequate one you have — you'll just quickly overfill it again.
    3. Replace the optical drive in your MBP with a large conventional hard drive, giving you two hard drives inside the machine. You will then need one or more external drives large enough to back up both of the internal drives.
    If you sense a theme here — back up, back up, back up — you are correct. It's flat-out foolhardy to own or use a computer without maintaining complete, up-to-date backups of everything at all times.

  • With the new fcpx...can we use the plug ins I paid for..like FxFactory?

    ....with the new fcpx...can we use the plug ins I paid for..like FxFactory?

    It's highly likely, Apple are not in the habit of shooting themselves in the foot and have an excellent track record for handling major architectural transitions (68000 to PowerPC, PowerPC to Intel, OS 9 to OS X etc) but of course nothing can be guaranteed until further official announcements are made. Your existing software however will certainly continue to work for some time yet to come with  compatibility for the existing FCP, Motion, After Effects versions.
    Why not drop an email to FxFactory / Noise Industries support?

  • Does leaving the bluetooth on all the time drain the battery?

    Does leaving the bluetooth on all the time drain the battery?

    In my experience, the impact is minimal, especially on something like an iPhone 5S. Mine is on all of the time because I use it all of the time, mostly for my Pebble Smartwatch but also for headsets and speakers.
    Best of luck.

  • After putting still photos into the time line the pop up all over my video when I burn a CD or load to YouTube

    After putting still photos into the time line the pop up all over my video when I burn a CD or load to YouTube.
    The video in FCPX looks fine, But when I load it the photos will play over top of each other or double play.

    Export your project as Quick Time Current Settings by choosing Export Media in the Share menu. See if the movie plays correctly in QT Player. If it does, upload that to Web.
    Russ

Maybe you are looking for