FCPX does it transcode media in the order it was imported?

Does any one know how FCPX handles transcoding media? Does it transcode in the order it was imported?

Not sure, but I wonder why that would be important. You can begin working immediately, and FCP X will use your original media or optimized media if present, seamlessly. So if it takes an hour for some clip A to be optimized, FCP X will use the original and then automatically start using the optimized when it is ready.

Similar Messages

My MacMini does not stop after giving the order ''switch off''.What can I do?

My MacMini does not stop after giving the order ''switch off''.
It stops only, after pushing the button ''on/off'' for some seconds.
What can I do?
frahsun

boot the Mac into safe mode, repair permissions while in it, then reboot normally.
if that doesn't help, try resetting the System Management Controller (SMC).

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
also use the Command-L to view logs during installation

"The class being compiled does not match the class that was imported"

----------Actions on timeline in
sixSpices/updateSite/updateSite.fla----------
import com.sixspices.updater.view.*;
var calDrawer:CalendarView = new CalendarView(); //Listener /
view
----------sixSpices/com/sixspices/updater/view/CalendarView.as
file----------
class CalendarView {
public function CalendarView(){
public function onRecieveData(listOfEvents:Array) {
displayEvents(listOfEvents);
public function displayEvents(listOfEvents:Array):Void {
trace(listOfEvents);
When I test the movie (updateSite.swf) in flash, it gives me
the error:
The class being compiled, 'CalendarView', does not match the
class that was imported,
'com.sixspices.updater.view.CalendarView'.

Here is my file structure:
sixSpices
-->updateSite
-->-->updateSite.fla
-->-->updateSite.swf
-->com
-->-->sixSpices
-->-->-->updater
-->-->-->-->view
-->-->-->-->-->Calendar.as
If I move updateSite.fla to the folder sixSpices so that
"com" is in the same folder as it, I get the same error.
The following works with no problems (no similar error):
----------Actions on timeline in
sixSpices/updateSite/updateSite.fla----------
import com.sixspices.updater.model.*;
var calModel:CalendarOverview = new CalendarOverview();
//Broadcaster / model
----------sixSpices/com/sixspices/updater/model/CalendarOverview.as
file----------
import com.sixspices.updater.model.*;
import mx.utils.Delegate;
import mx.events.EventDispatcher;
class CalendarOverview {
public function CalendarOverview(){
}

Help! FCPX is copying my media to the Original Media folder even though I tell it not to.

I made the transition to FCPX several months ago and in the beginning saw no issue with the import process - FCPX would create aliases when asked during the import process and all would be well. Now FCPX insists on copying my media to the Original Media folder. It no longer creates aliases. This consumes my RAM, takes up hard drive space as the files are duplicated, and slows down my editing process. What am I missing? None of the options to copy the media are checked. I review this every time but each time I try to import without copying, transcoding or anything I still find that FCPX copies the media instead of creating aliases. Please advise... many thanks.

What do you see in the import dialog? Is copy media grayed out? What preferences do you have set in importing? How are in importing? Drag and drop? Import window? What are you importing? Where are you importing from?

Does PSE13 download photos in the order they are taken on that date and show actual time when hovering over the photo as it did in PSE6?

In my work, I need to be able to look at photos I took throughout the day at various locations and group them by the time I was there on that date to distinguish the different properties I am taking photos of. In my previous version of PSE6, when the day's pictures were downloaded, they were downloaded to the computer in the order I took them, and if you hovered over the picture it would show the time the photo was taken. I just need a program that will organize in that fashion. I do not need a lot of editing options, more the organizational options.

Hi,
If you are happy with PSE 6, why not continue to use it?
PSE 13 can display the images in date/time order like PSE 6 does. The time doesn't appear when you hover over a thumbnail but can be displayed below the thumbnail. The best thing is for you to download the trial version (select version 13 from the following link) and try it for 30 days to see if you like it.
Download Photoshop Elements products | 13, 12, 11, 10
If you use the trial, to see the date and time under each thumbnail you need to go to the View menu in the organizer and ensure that Details is checked.
Brian

Shuffle does not play playlist in the order set in itunes, when play in order is selected

My new shuffle does not play the songs on a playlist in the correct order (as they appear in itunes), my previous shuffle allowed me to see tha tracks and swith the order.
Why won't this new shuffle play in the order I want (shuffle isn't selected)
Is there a way to see the tracks and order loaded onto the shuffle?
Thanks
Mark

I FINALLY GOT IT! after months of relentless synching/autofilling problems on my 4th generation i figured out the solution.
this is what i did: plugged in ipod on off mode~>manually deleting my ipod's songs~>restored factory settings~>unchecked automatic synch~>made a new playlist with exactly the songs & order i wanted for my ipod (just dragged old playlists into the new one)~>then autofilled that new playlist into my ipod. came out like a charm! (before u autofill UNCHECK random add songs)
my ipod always ended up autofilling/synching my customized playlists wrong or it would automatically do my music library (and that was way unorganized), so this worked.

IDVD changed the order of photos imported from Aperture

I created a project in Aperture from two different camera inputs. One had EDT and the other had PDT. I didn't think to make them the same time zone. After putting the combined photos in the order I wanted, I called the Aperture file from iDVD to create the slide show. IDVD changed the order. I am not sure what piece of Meta data it looked at to create its order. I had to go back into iDVD and recreate the order I wanted.
How does iDVD decide which order when the file has a mix of photos not from the same camera?
Thanks

How does iDVD decide which order when the file has a mix of photos not from the same camera?
Good question and frankly I don't know the answer.
But let me know if this helps:
http://www.automator.us/aperture/example-03.html

Is the order of adjustments important?

In a tutorial video on Aperture 1.5 on sharpening (http://www.apple.com/support/aperture/tutorials/edge_sharpen/) they tell me to make any other adjustments I want to make before sharpening. I have never read nor heard of this importance in Aperture before, although in extreme cases I did suspect it can make a difference in which order the adjustments are done.
Is the order of adjustments indeed important in Aperture 2.1.4?
If so:
- isn't it strange that at a later time you cannot see the order of adjustments made earlier?
- are there general guidelines what order is best in most cases?
- can I make an adjustment X twice (before adjustment Y and after adjustment Y). This could, theoretically, make a difference with adjustment X once and adjustment Y once.
This may be be rather silly and academic questions. In daily use I think it does not matter.
Koen, from the Netherlands

I think the order of adjustments isn't important +per se+, but it may change some stuff.
For example, if you boost your contrast and then adjust colours, it might not been as accurate as with "out of the box" colours. Again, it's my guess.
Non-destructive raw editing is made to prevent this kind of issue, so maybe my example is a bad one and there is no problem at all with the order of adjustments.

Does ANYONE using lP6 get the option not to import duplicates?

Not having the opetion to not import duplicates is a serious problem. It worked in iP4, it didn't work in iP5 until I trashed my prefs, but that fix doesn't work in iP6. I know there's a workaround with Image Capture, but I'd prefer that iP6 work at least as well as previous versions without my having to work around a bug.
Does anyone get the option not to import dupes?
BC
G4 450DP Mac OS X (10.4.5) 1.63GB RAM, 16" Paiste China Crash
G4 450DP Mac OS X (10.4.5) 1.63GB RAM, 16" Paiste China Crash

ber,
I did what you had done, and I got the No Duplicates option!
I am guessing that the reason I did not get the option before might be that the photos that were dupes had been originally imported into iP5, and for whatever reason iP6 couldn't detect them as dupes. The photos I just tested were imported in iP6, and it recognized them as duplicates.
Thanks for your help.
BC
G4 450DP Mac OS X (10.4.5) 1.63GB RAM, 16" Paiste China Crash

Itunes for Windows 7, cannot find the album which was imported to my library

Tried to import an album from a CD to my iTunes library. The iTunes dislogue box said the music was imported but it is nowhere to be found in My iTunes Library. I attempted to download the CD again and the dialogue box said it had already been imported. Where is it ??? The operation system is Windows 7. And, I have had no such porblems in the past.

The first thing I would try is Missing Artist or Album not with others by same artist. I've also seen reports of people compaining that the Music section of iTunes doesn't list all their content. For some reason adding a new track such as the current iTunes Single of the Week is proposed, and even confirmed, as a solution, though to be honest I can't see why it would make any difference.
If you make a smart playlist that should match your recent addition does it show up in that?
tt2

Having downloaded and installed the latest Maverick Ios I now have a problem with mail.All my mailboxes were in alphabetical order now they are arrange randomly under my mail account, sync does not rearrange them whilst the order in the ISP account is in

I have downloaded Maverick 10.9 and installed , now my mailboxes in mail are randomly arranged as opossed to being in alphebetical order from A at the top to Z at the bottom how do you rearrenge the mailboxes in an alphbetical order.
Sync with my provider Gmail does not rearrange them on my Imac

Thanks for that .
My actual problem I may not have made very clear - sorry.
i.e.
[email protected]
AA insurance
Xero
apple
building
insurance
etc.
Shows the way the mailboxes are listed in the mail program under any particular provider, in my case I have three mail provider accounts with mail moved from the inbox to the appropraite mailbox eg [email protected] , Xero - where the incomeing mail is filed.
My problem is to arrange these mailboxes/folders in an alphabetical order under the [email protected] account

Ordered an iPhone 6 Plus off contract with a credit card that has a different billing address than the account. Does it matter and is the order going to be cancelled if it doesn't process the card correctly?

Just don't want to find out Wednesday that my order was cancelled or delayed because the credit card has a different billing address than the account. If they check the validity of the card at the time you pre-order I don't see it being a problem.

Oh, should mention I ordered right at 3AM (EST) on the 12th and got a Confirmation email with a Deliver by: 9/19/14 but when you try the "Check Status page" it spits out "Expected Ship Date: Not available at this time."

HT1925 I uninstall all the itunes component except in the order i was supposed to as i found out later on, and know i can't remove Itunes and Apple software itself. What should i do..

I uninstalled all the Itunes components but not in the right order, now i can't uninstall the Itunes or the Apple Software thats left. What should I do?

many thanks. Okay, we'll give the following procedure a shot.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

(Windows 8.1) My iTunes takes a while to open, freezes and doesn't recognize any apple device plugged into it. I've uninstalled iTunes and other software components in the order I was told but still end up with the same result.Why is that?

Why is iTunes for Windows 8 (8.1) taking so long to boot up, not recognizing an apple device and freezing after a proper uninstall and reinstall?

Hmm....I just had another thought. All the machines are running Win7 SP1, BUT the 2 that can sync with MSE installed are 32bit versions, however the one that can't is 64bit. Not sure if that makes any difference though. All are clean installs with Win7SP1 media, not SP1 installed later.

FCPX does it transcode media in the order it was imported?

Similar Messages

Maybe you are looking for