FCPx doesn't recognize Premiere Pro CS6 XML

Seriously?

THe only application I'm aware of right now that will allow you to convert a Premiere XML to FCPX is Black Magic Resolve. They have a free version of the software. Resolve is not the easiest program to use, but it's worth learning how to use it just for the utility it can offer.

Similar Messages

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

How to get Adobe Premiere Pro CS6 to Recognize Proxy files created on an Omneon Server

I work for a non profit at Rice University. For years we have been shooting multicam and recording to an Omneon Server system. The Omneon creates its own proxy files which we used to just load onto Fincal Cut 7. We have now upgraded our computers and programs and are using Premiere Pro CS6. When I load the Proxy file created by Omneon, Premiere won't recognize the file as a proxy, it will just tell me there is no video or audio attached to the file.
Thank you

Thank you,
The formate is MXF : Apple XDCAM HD 1080i60 (35 Mb/s VBR), 1440 × 1080, Millions 24-bit Integer (Little Endian), 4 Channels, 48.000 kHz 29.7 fps
The Proxy has a QT wrapper it looks like but won't play on the latest version of QT I have to use QT7.
Thank you

XML PROBLEM EXPORT PREMIERE PRO CS6

hello to all, the program is not running Premiere Pro CS6 upgrades and does not export more in XML format, there is the option in the dropdown menu of exporting premiere.
com and I need to know I can do to reappear the option to export XML in premiere pro CS6
thanks to those who will help me

I have a similar issue. This is the article you should probably read: http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premiere-pro.html

Importing a Final Cut Pro7's XML into Premiere Pro CS6 - 2

Hello, im trying to import an xml exported from Final Cut Pro 7 into Premiere Pro CS6, but Premiere returns me an error message saying that the sequence cant be opened because the codec cant be accessed.
The codec is Apple Prores 422 (HQ), and also all of the codecs that Final Cut Pro gives, dont appear as an option when Im creating a new project file. Only the standart DV, DVCPRO50 and DVCPROHD are available.
My quicktime is updated, and I already have Final Cut installed.
Can anyone help me please?

FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

Importing a Final Cut Pro7's XML into Premiere Pro CS6

Hello, im trying to import an xml from Final Cut Pro 7 into Premiere Pro CS6, but Premiere returns me an error message saying that the sequence cant be opened because the codec cant be accessed.
Anyone has any clue for me?
thanks!

Hi Kevin, thanks for helping out...
The codec is Apple Prores 422 (HQ), and also all of the codecs that Final Cut Pro gives, dont appear as an option when Im creating a new project file. Only the standart DV, DVCPRO50 and DVCPROHD is available.
My quicktime is updated.

I downloaded Premiere Pro CS6 trial on my mac and it doesn't show up! Any Ideas?

I was looking into buying adobe Premiere Pro CS6, so I signed up for the trial and signed in and downloaded it. But straight after downloading it, NO applictaion showed up in my applications folder!
I don't think I've done anything wrong, I've done the same thing for Premiere Pro as I did for my Adobe Photoshop.
Any Ideas Anyone?

Locate the downloaded file:
1. try to launch the file and see if you get prompts.
2. drag the downloaded file to applications folder

Can choose 5.1 in Audition CS6 for monitoring, but not in Premiere Pro CS6

System: Z820, Win 7 Ultimate x64
Audio: Creative SoundBlaster Recon3D PCIe, Altec Lansing 5.1 speaker system
SW: Master Collection CS6
I've been using Premiere Pro CS6 for a while now, but only for stereo video projects. I recently started working on a short film and needed 5.1 Surround Sound as well. I created a 5.1 surround track in Au, and have been able to monitor the sound and surround panning effects in Au during development. Here are the Audio and Channel Mapping settings I used to get my 5.1 to work so I could monitor it:
As can be seen, I've chosen the default MME Device Class here, and all seems well. I have 6 channels identified and mapped to the right corners. I've also confirmed my Master Track in Au is 5.1 Surround. I exported a 5.1 WAV and imported it into Pr, into a 5.1 surround session, confirming that both the track where the WAV file landed and the Master are both 6 channels (and although the order is displayed differently, the content correctly mapped from Au into Pr).
Now, my fun began. When I monitor the audio in Pr, I hear only Stereo. So, I check my channel mapping in Pr, as shown below:
As can be seen here as well, I've chosen the 'default' Premiere Pro WDM Sound. I've learned that WDM is a newer version of MME and encapsulates all the functionality of MME. I'm not sure why Au uses MME and Pr uses WDM. However, as shown, with WDM chosen, I only have 2 channels in the mapping dialog to work with, not the 6 I have (and had in Au). Nothing I can do will produce those other four channels.
As seen in the drop down captured in the above screen grab, I also have ASIO4ALL installed, but that too only shows 2 channels in both Pr and Au. Interestingly, when I hover the mouse over the speaker selection in the ASIO4ALL control panel, it only indicates there are 2 channels (but indicates that there are 6 INPUT channels). The Creative SBZ Series ASIO option is no better, providing only 2 channels.
So, I was off to check my system settings, which are all shown below:
As seen above, Windows knows there is 5.1 surround on the system, and the Test available in the bottom left dialog proves that each speaker is configured and working correctly. Audition also knows there is 5.1 available on my system and uses it correctly as described earlier. However, Pr refuses to recognize this and as a result I am unable to monitor any 5.1 surround projects on my system. If neither Au nor Pr worked, then I'd mark it down as Sound Card or Driver issues, but since one Adobe product uses the system audio correctly, and the other doesn't, it leads me to believe that it is Pr who is at fault.
So, my question is this: Why won't Pr recognize my 6 output channels like Au does?
Any advice would be appreciated.
Cheers,
Shane

ryclark, I believe you are correct in that Au uses MME while Pr uses WDM, but both MME and WDM (which, according to the Microsoft specification, encapsulates ALL of the MME capabilities, and expands on them) are 5.1 capable. I can play my export from Au as a 6 channel interleaved WAV file as well as an AC3 conversion of that same file in both VLC and Windows Media Player and get the same 5.1 channel surround sound field I do from Au.
After more research, I'm beginning to think this might be a result of the fact that Pr is 64 bit and Au is still 32 bit in CS5.5 and 6. I don't know if Au CC is 64 bit, but if it is, I'd be interested to know if what I am seeing is reproducible in the CC versions of Pr and Au (to eliminate the 64 bit vs 32 bit argument). Some have suggested that perhaps the standard SB driver is only 32 bit, although it 'supports' 64 bit supposedly, but maybe Pr just can't handle that 32 (faux 64) bit driver. A possibility.
Thanks for the read and response. Seems lots of people are in this boat together. You have recommended elsewhere to use an external audio interface, but just to do 5.1 monitoring (I don't do any live recording to my PC, this if for movie sound post/mixing) sounds pretty clunky. At the least, I think I'd need not only an external audio device with at least 6 channels out, but a receiver to take those outputs, and 6 new audio speakers to connect to that AVR. I currently use my computer's soundcard, as you know, and your standard 5.1 powered computer speaker system attached to that. Not the best, I know, but at this point, I'm just going for surround, but THX, so it is sufficient ;-).
Cheers,
Shane

Premiere pro cs6 upgrade problem

why doesn't premiere pro cs6 upgrade recognize my cs5.5 serial number??

Exactly what steps have you taken so far and what error messages are you receiving?
Are you upgrading a standalone version of CS5.5 or is it part of a suite? Is CS6 a standalone upgrade?

"Adobe Premiere Pro CS6 has stopped working" but was working fine a week ago...

On my desktop (Dell XPS 8300), I keep getting the error message "Adobe Premiere Pro CS6 has stopped working" when openng up a previously created project or trying to create a new one in Premiere Pro CS6.
On my laptop (MS Surface Pro 2), I can load projects and edit them, but I cannot export media. When I try, it just sits there and does nothing. I've also tried sending it to Media Encoder, but that doesn't help either. Sometimes, it crashes too.
I'm running Windows 8.1 on both with the latest updates installed.
Oddly, this started roughly around the same time on both computers.
I've tried uninstalling and re-installing, but that didn't help.
I've run the Windows troubleshooter and that didn't help either.
I've tried running as an administrator, and running the program in compatibility mode for Windows 8, 7 and Vista - that doesn't solve the issue either.
At this point, I can't do any work and am even considering paying for CC even though I just dropped $700 on CS6 last year, but I'm wondering if that would even solve the issue, or if the CC version would also not work...

>started roughly around the same time on both computers
Most likely cause is a Windows update that changed "something" about the video system
Check the vendor site (NOT Windows update) for a newer video driver
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Premiere Pro CS6 - A low level exception has occurred in ImporterMPEG

Hi Adobe Community,
I'm having a bit of an issue with the ImporterMPEG.prm plugin for Premiere Pro CS6 that's causing playback and exporting issues.
Computer Specs: Win7 PC, NVIDIA GeForce 6150SE nForce 430 graphics card
Description: After playing back video for a while, Premiere will eventually start repeatedly reporting "A low level exception has occurred in ImporterMPEG". The preview player will be completely frozen, and I'll be unable to export. The exporting will fail with a generic "Unexpected error" message.
This issue has only started a week ago. Until now, I've been able to use Premiere Pro CS6 with no issues. If possible, I'd like to avoid upgrading to CC 2014, because the CS6 version was working fine before.
So far, I've tried a few things:
• Deactivating and reactivating (which, by the way, apparently doesn't help subscription users like me, per my recent chat with Adobe support on this issue)
• Uninstall and reinstall (I didn't know about the CC Cleaner tool at the time, so I haven't tried a clean uninstall yet)
• Change the Preview File Format in Sequence Settings (from I-Frame Only MPEG which had worked since I installed the software over a year ago to Microsoft AVI)
• Crying silently to myself (this did not help, the computer is cold and cruel)
• Clearing out the media cache (which I'd never done before and let it get up to ~75GB without me noticing)
• Moving the plugin from its location in Program Files, hoping that maybe Premiere Pro would notice it was missing and to try to find a new fresh one (it didn't work)
So far, only the Preview File Format change seemed to bring relief, but the bad behavior came back after about a week.
I'm thinking maybe the ImporterMPEG.prm plugin got corrupted somehow? The one notable thing I can remember with the computer in the last few weeks was a power event that shut down my computer unexpectedly. I think I had Premiere Pro open at the time.
If it's relevant, I mostly work with .AVI, .MP4, and .TS files in my projects, all varying resolutions and FPS. I'm usually working with about 1GB of files in a project, very rarely more than 2GB.
Has anyone else had this issue? Or, even better, has anyone else resolved this issue?
Thanks!

But really, the real solution for me was to not update Premiere Pro CS6 after a reinstall. The most recent updates just do not like my computer, I guess.
Figured I should post this solution here in case anyone in the future has this problem. (relevant: xkcd: Wisdom of the Ancients)
-Sam

Adobe Premiere Pro CS6 has stopped working when importing music (Windows 8)

I have a problem with Adobe premiere Pro CS6 on windows 8. When I use Premiere Pro CS6 for the first time, it's doesn't have any problem, but now I can't import music to Premiere Pro CS6 and it's say ''Adobe Premiere Pro CS6 has stopped working'', I don't know what should I do. How to fix it ?

>started roughly around the same time on both computers
Most likely cause is a Windows update that changed "something" about the video system
Check the vendor site (NOT Windows update) for a newer video driver
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Premiere Pro CS6 - Mp4 Error. Green Previews

Hey, So i'm using Premiere Pro CS6 currently.
My issue is when I import a .h26 MP4 file either A, the file will show but keeps saying media pending, or B (the more common one) will show a pure green preview through the whole clip.... when I go into the properties of the clip it shows a weird error where it shows the frame rate a 0.139 FPS. Yet the footage is 23.976 fps, and when put into the time line it is the correct length at this 0.139 fps, I tried changing the frame rate manually to 23.967 and it shrunk the clip to under a second, Its strange when I work in AE the footage shows fine yet as soon as its in Premiere Pro it greens out. I never had this issue until a few weeks ago. We were working on a large movie and I had a month or so off work so I didn't touch Premiere or the files, I have verified the file locations as well and tried re linking them but it still shows the green error. As well I know it is only the .H264 codec as I can import a video with an mpeg4 codec with no issues... I have tried re installing Premiere but still no fix.. the strange thing is to if I export in AME only it doesn't show the green, yet out of premiere through the export dialog it shows the green in the exported video yet has all the audio of that clip...As well I never have had this issue before..I could always import .h26 MP4's with no issue up until now.
Any suggestions?

Hi Wes,
WesBeiko wrote:
Hey, So i'm using Premiere Pro CS6 currently.
My issue is when I import a .h26 MP4 file either A, the file will show but keeps saying media pending, or B (the more common one) will show a pure green preview through the whole clip.... when I go into the properties of the clip it shows a weird error where it shows the frame rate a 0.139 FPS. Yet the footage is 23.976 fps, and when put into the time line it is the correct length at this 0.139 fps, I tried changing the frame rate manually to 23.967 and it shrunk the clip to under a second, Its strange when I work in AE the footage shows fine yet as soon as its in Premiere Pro it greens out. I never had this issue until a few weeks ago. We were working on a large movie and I had a month or so off work so I didn't touch Premiere or the files, I have verified the file locations as well and tried re linking them but it still shows the green error. As well I know it is only the .H264 codec as I can import a video with an mpeg4 codec with no issues... I have tried re installing Premiere but still no fix.. the strange thing is to if I export in AME only it doesn't show the green, yet out of premiere through the export dialog it shows the green in the exported video yet has all the audio of that clip...As well I never have had this issue before..I could always import .h26 MP4's with no issue up until now.
Any suggestions?
Other people with "green frames" solved their issue by updating GPU drivers. Can you try that?
You say you are working on a movie. What is the camera these files were shot on?
Do sequence settings match clips settings precisely?
You say you never had this issue before a few weeks ago. Did you make any updates to Premiere Pro? Your OS?
Thanks,
Kevin

Premiere Pro CS6 and Media Encoder CS6 Color shift on export

Hello,
I am working on an early 2008 Mac Pro with 2 X 3.2 GHz Quad Core Intel Xeon Processors 32 GB of RAM a NVIDIA GeForce 8800 GT 512 MB Graphics Card and I am running OS X 10.8.2.
I have the updated Version of Adobe Premiere Pro CS6 and Media Encoder CS6 through the awesome Subscription program that Adobe has started.
My footage is shot with the Canon 1D Mark IV shot 1920X1080 at 24 FPS
I am importing the camera files and then exporting them after I cut them up in to Quicktime Pro Res 422 HQ files
With the technical explination out of the way here is my problem. I have color right from the camera files that I like. and with out doing any thing to change the color I export the footage and get a dramatic color shift. The exported file looks desaturated and slightly green.
I have tried using Media Encoder CS6 to export my footage and that has the same result.
I started my career as a photographic retoucher and use photoshop and light room constantly so I am pretty confident that i know color. I also calibrate my Lacie 526 and Lacie 324i montiors monthly as well as have a sensor that will slightly shift the profile depending on the time of day.
I have attached three screen shots that show the color shift exactly. Now what I need is a solution. What I am not seeing is color settings for Premiere. I am totally open to any suggestions on what I might be doing incorrectly.
Ben

Benjamin Peterson wrote:
I started my career as a photographic retoucher and use photoshop and light room constantly so I am pretty confident that i know color. I also calibrate my Lacie 526 and Lacie 324i montiors monthly as well as have a sensor that will slightly shift the profile depending on the time of day.
I've been doing this for a few years now, and have come to some conclusions. Basically, the difference between still photography and video is like the difference between playing the trumpet and the sax. What you bring to the sax from playing trumpet is your ability to read music, what you know about composition, blending while playint with others, ect. But playing trumpet tells you nothing about how to physically play a sax. So it is with still photography and video.
For starters, your carefully calibrated computer monitor is just that, a computer monitor. It doesn't display the correct working space for video. What you need for WYSIWYG in video is a monitor that can show you the Rec.709 working space. Rec.709 has a different gamut, a different gamma, probably a different white point (D65), different phosphor colors, etc., etc., etc. Enought differences that it's difficult to make a computer monitor that can successfully display Rec.709. Yet there are a couple of computer monitors that can do this (a few Eizos, one HP). The vast majority of people doing serious color correction work in video use a production monitor for just this reason.
But a production monitor isn't enough. You also have to make sure that the signals you're sending the production monitor are correct. There's a sub-industry making signal converters for signals from NLE video cards (usually RGB based) -> signals for production monitors (usually YUV based).
That said, it is certainly possible to get a very good match between your NLE suite and a DVD / BD as displayed on an HDTV. But it's not as simple or easy as a calibrtated computer monitor for still photography use.
This is probably part of your problem. But Quicktime is probably the root of it. Quicktime is, well, I guess the polite way of saying it is that Quicktime is problematic. It gives all kinds of problems. Most people have abandoned it. You should too.

Exports From Audition CC Give "Header Error" in Premiere Pro CS6

Hello,
I have finished the audio mixing on a 15 track project in Audition CC. It is very heavy so I had to export all the tracks separately to import them back into the Premiere Pro CS6 movie project. That way I could also do further adjustments in individual tracks later on directly on Premiere, if needed (since mixing isn´t something we´re ever done with).
I´ve exported them all in wav 9600 Hz 32 bit (Audition doesn´t say whether it´s floating point or not) and also wav 9600 Hz 24 bit. The originals on all the tracks were eitther wav 9600 Hz 24 bit, or wav 9600 Hz 32 bit (converted from 24 bit to aplly declipping and normalization), except 2 tracks with music that had mp3, wav and m4a.
When importing the exported Audition files back into Premiere all of the 15 tracks, including the ones that didn´t have mp3 and m4a in it, give me the message "The file cannot be opened because of a header error".
Questions:
1. What could be wrong?
2. In case there isn´t a solution, what would be the best lossless formats to try and do the exports for importing into Premiere?
Thanks a lot.

I see...
Trouble is I´ve never had an answer for my posts in the Audition forum (I did originally post this here because I thought it´s more of a Premiere issue, though). I guess Audition just isn´t nearly as widely used as Premiere.
Also, I have done the same kind of exports for smaller tracks from Audition before and didn´t have an issue importing them into Premiere.
I find it really troubling that Adobe intends to make Audition a reliable pro audio suite integrated with Premiere and, on top of some weird issues like this one (and such as the 16 bit limit for sending a project from Premiere to Audition, making that integration probably useless for most pro uses), there´s so little support.
But thanks a lot, anyways!

FCPx doesn't recognize Premiere Pro CS6 XML

Similar Messages

Maybe you are looking for