FCPX & Event Manager problem

I trashed Event Manager as I don't need it with the FCPX upgrade to libraries. After trashing it, FCPX won't open. What now? This is what I see.

That shows 10.1 and the latest update is to 10.1.1
Have you updated to that?
If not, do so and see how it goes.
You could also try trashing the preferences for a start.
Assuming that does not do the trick we will need far more info about exactly what you did.
Corrupt preferences can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.

Similar Messages

Appraisals & training and event management problem

Hi gurus.
I'm trying to configured the integration between Appraisal and Training & Event management (Appraising a Business Event and Attendee Appraisal
I set an attribute HAP00 REPLA = A .
But two problems occurred.
1.
The definition of Appraisal catalog for employees is no problem. But I have a problem with definition of Appraisal catalog for Business event and for Attendees.
Through the definition of Appraisal catalog via SPRO (Training and Event Management/Recurring Activities/Appraisals/Edit Appraisals Catalog) its possible to create an appraisal templates only for employees (it looks like that, because there is only Category group Personnel Appraisals and its not possible to add new category for example Attendee Appraisal).
Can somebody help me where I can define appraisal templates for Event management or how can I get the Appraisal catalog category groups - Appraising a Business Event and Attendee Appraisal?
2.
I set the attributes SEMIN EVAEV/EVAPA to the values 2/3 in connection with table T77BF.
When I run tcode PV33 or PV34 the matchcode of appraisal templates contains the list of all object type VA. The problem is that when I run tcode PV33 I dont want to see all appraisal templates, but only for appraising a Business Event.
It is possible to configure that so? If yes, how.
Thanks in advance.
Regards

Hi,
1. transaction LSO_CATALOG
Regards and Groetjes,
Maurice Hagen

Problem with Embedded Event Manager and Object Tracking

Hi,
I have a 2801 running c2801-advipservicesk9-mz.124-24.T2.bin. It has the following configuration:
track 300 list boolean or
object 10
object 11
object 12
object 13
event manager applet clear_ipsec_tunnel
event track 300 state down
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
My problem is that after the tracked object number 300 transitions from an up state to a down state, nothing happens. It seems like the applet doesn't work with object tracking. Here's what I see in logs:
Dec 7 21:52:32.236 MCK: %TRACKING-5-STATE: 12 ip sla 12 reachability Up->Down
Dec 7 21:52:37.236 MCK: %TRACKING-5-STATE: 13 ip sla 13 reachability Up->Down
Dec 7 21:52:57.236 MCK: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
Dec 7 21:53:07.236 MCK: %TRACKING-5-STATE: 11 ip sla 11 reachability Up->Down
Dec 7 21:53:07.996 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
That's it. For some reason, the applet won't execute the CLI commands when the EEM applet is triggered. Am I doing something wrong or I have encountered some bug? Thanks.

jclarke,
Today I added the router into the tacacs server database and the applet started working just fine by using my login name. So the working configuration looks like this:
event manager session cli username "my login name"
event manager applet clear_ipsec_tunnel
event track 300 state down maxrun 30
action 1.0 cli command "enable"
action 2.0 cli command "clear crypto session"
action 3.0 syslog msg "IPSec tunnel has been cleared by clear_ipsec_tunnel applet"
Then I tried to use a login name from the local database that has "privelege 15" access and of course the debug output showed me this:
Dec 8 18:12:58.203 MCK: %TRACKING-5-STATE: 300 list boolean or Up->Down
Dec 8 18:12:58.203 MCK: fh_track_object_changed: Track notification 300 state down
Dec 8 18:12:58.203 MCK: fh_fd_track_event_match: track ED pubinfo enqueue rc = 0
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: msg_type=64
Dec 8 18:12:58.215 MCK: fh_send_track_fd_msg: sval=0
Dec 8 18:12:58.219 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_open called.
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.227 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>enable
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Command authorization failed.
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.747 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : IN : Router>clear crypto session
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : ^
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : % Invalid input detected at '^' marker.
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT :
Dec 8 18:12:58.771 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : OUT : Router>
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel: IPSec tunnel has been cleared by clear_ipsec_tunnel applet
Dec 8 18:12:58.775 MCK: %HA_EM-6-LOG: clear_ipsec_tunnel : DEBUG(cli_lib) : : CTL : cli_close called.
So I guess this problem arises when you have command authorization enabled and the tacacs server is not reachable or something like that. I have tried to find a way to use the local database instead of using the aaa server but didn't succeed. Although I have found an interesting workaround. Here it is:
Link: http://blog.ioshints.info/2007/05/command-authorization-fails-with-eem.html
Workaround found after reading the "Executing IOS commands from Tcl shell" from the "Tclsh on Cisco IOS tutorial".
On the above article it is mentionned that the ios_config command is executed inside the context of another VTY line (also found with the AAA debug). The workaround is to define the FIRST VTY line with "transport input none" to prevent ssh or telnet to grab it and to configure the aaa authorization without any command authorization for this line.
Kind regards
Christian Chautems
Looks great, but I am not quite sure how to "configure the aaa authorization without any command authorization for this line".
Anyway, jclarke thank you so much for taking your time to look into my problem and for your help.

Does Event Manager 1.4.4 work in FCPX 10.1 (& 10.0.9)?

Hi
Does Event Manager 1.4.4 work in FCPX 10.1 (& 10.0.9)?
Otherwise, what are folks doing not to be overloaded with events and projects when using FCPX?

Ian!
Looks great. I'll consider it.
I've got a bunch to think about before creating the libraries.
I'm thinking I almost would prefer not to create libraries since I often use some media from old projects in new projects and don't want to be copying from one library to another.
I probably should post questions about that possibility separately, don't want to gush.
best to you, Ian,
elmer

Problem with Script Events Manager buttons not showing up

Hi,
First off let me say that the latest release of Adobe products is a steaming pile of @#$#$.
Countless software issues, it's slow, buggy, you name it.
That being said, has anyone had this problem and know how to fix it.
My Script Events Manager is broken. Yes broken. The only buttons I see are "Done" and "Remove". There is no "Add" button so that I can actually add events. Someone please tell me this is user error and that I don't need to reinstall PS.

My system has 8 Gb of Ram and 4 processors. I doubt it's the system. I've had problems with CS Master Collection since day one. My main complaint is the ******* tabs and interface. Everything is so chunky. CS2 was smooth as butter. They keep making their products use more RAM and it's ridiculous. The tabs don't help, they only make life harder.
Thanks for the suggestions, I was hoping not to have to reinstall PS, but looks like it's the only option.

Problem with Events Manager: 'slct'

I set up an Events Manager item to run a script whenever the event "Selection" ( 'slct' ) is activated. The script works beautifully and I'm having no problem with the script itself. I am, however, having problems with what happens after the script finishes. I have this problem even if I completely comment out the script or delete everything inside the script file and leave it blank. The purpose of the script is to automate things when I select specific layers. That works and the script has some checks to prevent anything from happening unless one of those specified layers is selected.
The problem is, when I select a tool using the keyboard shortcuts, it will revert back to the previous tool upon the next keypress. It basically acts as if I am using toggle mode for that tool by holding down the key for that tool.
I wiped out my preferences but that did not solve the problem. It makes no difference how my keyboard shortcuts are mapped...either default or user defined. So for an example, here is how some of my keys are mapped:
B-Paintbrush tool
S-Brush Size Increase
So if I'm using the Clone Stamp tool and want to switch to the Paintbrush tool, I will press the "B" key. The tool switches as it's supposed to. If I need to change the size or hardness of the brush, I press one of the corresponding keys...let's say "S" to increase size. When I press "S" nothing will happen until I release that key. Once I do release it, the tool switches back to the Clone Stamp tool. You can get this same effect yourself if you hold down the key of the tool you are switching to (use the toggle mode) and then try to change size/hardness using the keyboard shortcut for that function while still holding that tool's key down.
If I select the tool from the Tools Palette, I do not have this problem. If the tool is selected from within my script, I do not have this problem. The only time I have this problem is when using the keyboard shortcuts to select the tool.
Keep in mind that I have tried this with the script code completely bypassed/erased so no script code actually exedutes. When I turn of the Events Manager or remove the 'slct' item from Events Manager, I do not have this problem at all. If I hold the <SHIFT> key down while selecting the tool, I do not have this problem (this is the same as if you were to hold down the <SHIFT>+<tool key> and press the key to change size/hardness).
To me, it seems as though if there is a 'slct' event item in Events Manager and the keyboard is used to select a tool, Photoshop treats it as if that key is being held down (toggled) until another key is pressed (or even the same key).
If anyone knows how to get around this problem, I would greatly appreciate it. Thank you.

I'm having the same problem where a keystroke (like changing size "[ or "]") will revert to a previous tool rather than change size. Particularly annoying when you left your previously selected eraser slightly larger or smaller than your brush size and don't realize it till you've erased.
So far, from reading across quite a number of forums, it seems the event listener istelf causing the issue
At the moment I've just been thinking of "BB" as my shortcut instead of "B" so when it reverts it reverts back to the brush anyway.
I'll come back if I find a real solution to this annoyance ;P
CS5
Wacom Intuos4
Windows7

EEM event manager applet problem

I'm trying to create an EEM applet to log the output of a command to file every 5 minutes. The idea is to get a traffic baseline for implementing control plane policing but I want statistics from at least a whole week (not just while I'm at work). I have a 6506-E running 12.2(18)SXF17a for WLSM (WS-SVC-WLAN-1-K9) support. Initially I was trying to save the file to tftp but it turns out one cannot "| append" to a file on a tftp server. I thought about trying to increment the file name with a counter but instead I opted for this:
event manager applet controlplanelog
event timer cron name controlplanelog cron-entry "0/5 * * * *"
action 1.0 cli command "enable"
action 1.1 cli command "show policy-map control-plane | append disk1:log.txt"
This didn't seem to work because the contents of the file "disk1:log.txt" didn't change over the course of my lunch time. I thought I had the timer messed up so I changed the entry "0/5 * * * *" to "0,5,10,15,20,25,30,35,40,45,50,55 * * * *". That didn't work either so I changed the event to none and ran it manually using "event manager run" and still, the file "disk1:log.txt" contents did not change.
Am I trying to execute an unsupported command or is this an error or am I just doing it wrong? Any help would be appreciated.

That is wierd. I must have typed it in wrong somewhere....
I had already removed all eem commands since I used the numbers from the other 6500 log file. When I added them back in with the command changed to "show version" the text file was modified as expected. Even before checking the file, I noticed a difference because I had debugging on per your previous suggestion and these lines showed up in addition to the lines which previously showed up.
545685: Sep 10 15:41:24.674 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT :
545686: Sep 10 15:41:24.674 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT : 6506#
545687: Sep 10 15:41:24.674 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : IN : 6506#exit
545688: Sep 10 15:41:24.674 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : CTL : cli_close called.
At this point I reverted to the original command and it now works as expected.
For the sake of progeny, here is the debugging when not appending to a file.
545990: Sep 10 15:50:27.016 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : CTL : cli_open called.
545991: Sep 10 15:50:27.120 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT :
545992: Sep 10 15:50:27.120 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT : 6506>
545993: Sep 10 15:50:27.120 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : IN : 6506>enable
545994: Sep 10 15:50:27.132 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT :
545995: Sep 10 15:50:27.132 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT : 6506#
545996: Sep 10 15:50:27.132 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : IN : 6506#show policy-map control-plane
545997: Sep 10 15:50:27.144 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT :
545998: Sep 10 15:50:27.144 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT : Control Plane Interface
545999: Sep 10 15:50:27.144 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT :
546000: Sep 10 15:50:27.144 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT : Service-policy input: copp-policy
546001: Sep 10 15:50:27.144 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT :
546002: Sep 10 15:50:27.144 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : OUT : Hardware Counters:(ouput omitted)546017: Sep 10 15:50:27.148 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : CTL : 20+ lines read from cli, debug output truncated
546018: Sep 10 15:50:27.148 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : IN : 6506#exit
546019: Sep 10 15:50:27.148 KST: %HA_EM-6-LOG: controlplanelog : DEBUG(cli_lib) : : CTL : cli_close called.
On a side note I have been pondering something unrelated to my original question but maybe you know the answer to that too. If I have NTP restricted by an access list using the "ntp access-group peer" and "ntp access-group serve" commands as well as through control plane policing, which list is processed first: Do the "ntp access-group" commands keep packets from entering the control plane that don't match the list or do they hit the control plane before being dropped by the access-list?

Training and Event Management

Can anyone guide me as how to create Training Events in bulk through SAP? I am getting stuck in all ways.. I am not sure where exactly FIRMLY BOOKED flag is stored coz of which we are not able to develop any programs.. Please guide me if ther is any way available to create Courses in bulk..

Firmly Booked flag is stored in Infotype 1026. If you want to create courses (E) in bulk, use planning Menu (PSVP in Training and Event Management and LSO_PSVP in LSO)
Close the thread if your problem is solved.

Training and event management issues

Hi guys,
i am stucked with some of issue in training and event management...
1. Altough client is using TEM but for frontend they are using ESS.. Now problem is search functionality is not working in system. I am getting 0 result.
2. I can see the catalog properly but when i do the booking for the future course then system shows course is successfully booked but in Training Activities list that course is not appearing and nothing updated in backend and if i do booking for future course in the backend then after that i can see that course in the frontend also. same is happening for cancellation. other functionality like prebook, qualification working properly in the system
3. Client is using Appraisal functionality. i have configured appraisal in the backend but how we can do for frontend.
kindly help me regarding these issue as early as possiblee....
Thanks and Best Regard
Puneet

Puneet
Can you please check SAP Note No. 1440812, 1439690, 1386556
Notes : 1421707, 1408134 ... if these can help.... Hope it helps...
Regarding training activities :
Can you please check the assignment of PERNR with User IT0105...
Also, are you using the customized BSP page ... If yes :
Please create a new BSP page copying from the standard BSP page and then enter the new page in the view LSPAGE_ALIAS_C.
Regarding appraisals in frontend, you will see a link of "perform course appraisal" under completed courses if you have configured this in a correct way.
Best Regards
Chetan

Change CSS colors in PSVI (Training and Event Management) ???

Hello All,
We're implementing Training and Event Management (PSVI). In EPD, the interface has some color issues. Namely, the background and color in a column is so dark, it's very difficult to read. (<a href="http://www.durhamcountync.gov/web_mgt/SAP/PV7I_color_issue.jpg">Screen Capture of Color Issue</a>)
I've searched on CSS, PSVI, Training and Event Management... and found all kinds of things. But, nothing on how to edit these color settings.
Is it through the ITS Theme Editor, an edit of a config/ CSS file on the portal server, edit to ABAP code in R/3? sigh. I'm at a loss.
Thank you for any wisdoms you can provide.
Ian

Hi Rick,
Thank you for your help.
The problem occurs in function module RH_OBJECTKEY_BUILD. Following raise is the problem.
    loop at bor_keyfields where bor_object_type = bor_object_type.
      read table structure_key with key
                               fieldname = bor_keyfields-reffield
                               binary search.
      if sy-subrc = 0.
        bor_objectkey+bor_keyfields-offset(bor_keyfields-ddlength) =
        hr_record_key+structure_key-offset(structure_key-leng).
      else.
*     FATAL ERROR!!!! BusObjectKey do not refer Infotypekey of DDIC!!!
        raise problem_to_build_borkey.*
      endif.
    endloop.
If found SAPNote 1066444 but the recommanted SP is already imported?!
Can you help me??

Internal Activity Allocation in Training And Event Management

Hi,
I am facing a problem while internal activity allocation of attendees in Training and Event Management. When i try to run "Internal Activity allocation for Attendees" i get an error message as " Reference document 1005 could not be found".
I have done all the configuration but even then i am unable to understand the reason for this error.
Plz help
Regards
TS

Hi,
I have resolved the above error. it was due to master data maintainence.
But now while posting i am getting an error that " Activity type XYZ can not be allocated to 2008"
Can someone help with this?
Regards
TS

Getting Training and Event Management Data using IT0031

Scenerio:
One of the Employee Is Retired. Now we hire it again for the same role ( extending its period after posting it as retired).
So the good thing that we can use the IT0031 "Reference Personnel Numbers" to get the desired ITs and found that can get other cutomized ITs by checking in the "Copy Infotype" attribute of IT records.
Now this seems to be valid if we are in the same module
but waht if i want to get this magic "Referencing of ITs" done for the "Training and Event Managment" Data of the employee.
Is it Possible Automatically ... or have to go fro ABAP... (I will not prefer ABAP)...
I hope i have stated the problem clearly ...
Feedback ... need it ASAP ...

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Training and Event management in ESS

We have 2 services in Training & Event management.
1. PV7I - Training centre
2. PV8I - My bookings
These two services have to be provided in ESS portal.
Is there any way to configure it in SPRO???? or is it necessary to manually create iview in portal and assign it to overview page????
In IMG->Cross-Application Components->Homepage Framework->Areas->Define Areas (Add Entries) I tried adding New Area then in IMG->Cross-Application Components->Homepage Framework->Areas->Assign Areas to Area Group Pages (Add and Change Entries) i assigned the New Area to the next position of stranded Area. But my New Area is not showing in the ESS Portal. There is no problem with the connection between backend system and portal because if I change the position of Standard Areas it is getting reflected in the portal.
Please Help.......

hi
go through this wiki page [http://wiki.sdn.sap.com/wiki/display/ERPHCM/SAPEnterpriseLearningCommunityWorkspace]
Regards

Workflows in HR: Training and Event Management (BO PDRELA_025)

Hi expert!
I have a problem in the context of SAP HCM Training and Event Management and the generation of a workflow event for BO PDRELA_025!
I have created entries in table T779X (through SWEHR3) as:
E 1001 A025 * BOKF 0 PDRELA_025 REQUESTED
E 1001 A025 * BOKP 0 PDRELA_025 REQUESTED
E 1001 A025 * BOKW 0 PDRELA_025 REQUESTED
E 1001 A025 * CNOW 0 PDRELA_025 DELETEREQUESTED
E 1001 A025 * CPRB 0 PDRELA_025 DELETEREQUESTED
...but as soon as it calls function RH_OBJECTKEY_BUILD, it fails and doesn't create the REQUESTED event.
As the key field for AttendeeID in object PDRELA_025 references OBJEC-REALO, function RH_OBJECTKEY_BUILD tries to find a corresponding field in structure PPKEY to create the object key. As it can't find this field in PPKEY, it fails and doesn't create the REQUESTED event. Is there something I've done wrong?
Can anybody help me please?
Michael

Hi Rick,
Thank you for your help.
The problem occurs in function module RH_OBJECTKEY_BUILD. Following raise is the problem.
    loop at bor_keyfields where bor_object_type = bor_object_type.
      read table structure_key with key
                               fieldname = bor_keyfields-reffield
                               binary search.
      if sy-subrc = 0.
        bor_objectkey+bor_keyfields-offset(bor_keyfields-ddlength) =
        hr_record_key+structure_key-offset(structure_key-leng).
      else.
*     FATAL ERROR!!!! BusObjectKey do not refer Infotypekey of DDIC!!!
        raise problem_to_build_borkey.*
      endif.
    endloop.
If found SAPNote 1066444 but the recommanted SP is already imported?!
Can you help me??

Regarding Event Appraisal Functionality in Training and event management

Hi TEM gurus,
Client requirement is that an employee can give feedback for faculty daily. Suppose there is an event for 30 days and there are 5 instructors for this event. Now employee has to give feedback for all the instructor and day wise.
Is it possible for an employee to give feedback daily and for different instructors in training and event management ? How we can track the feedback given by the employee for different instructors day wise ?
I have given value as "A" in switch HAPP00 REPLA in T77S0 table. We have created different templates through OOAM.
While doing appraisal also i have to select employee individually and give event name again. Is there any way by which system can select all employees an event ID ?
kindly help me as ealry as possible.
Thanks and Best Regards
Puneet

Hello Puneet,
Regarding your query on appraisal for every day of the business event, I am not sure if that's possible as it's the business event appraisal we are talking of here..and not the day. But I think individiual instructor appraisal should not be a problem.
Hope this helps.
Best Regards.
Karan.

FCPX & Event Manager problem

Similar Messages

Maybe you are looking for