FCPX has no audio tracks so how to add effects on voice over?

I imported my voice over track. Then, I proceeded to chop it up and move it to the appropiate points in the time line. However, now there are no "tracks" how can I EQ the whole thing in one go? All the individual choped up clips moved up and down willy-nilly into different empty areas of the time line.
Cheers
Waddo

I do VO work all the time, daily.  Record it, make that a Connected Timeline (if it is not in the Primary Timeline already), then chop it up as you normally do, and then align it with the audio first.  Then make it all a Compound Clip.  Apply the EQ or whatever sweetening you need to the Compound Clip.
Here are articles about doing VO with FCPX:
http://fcproxuniversity.com/FCPro_X_University/Blog_Archive/Entries/2011/9/22_Vo ice_Over_Work_In_Final_Cut_Pro_X.0.1_2_%28and_some_recording_tricks%29updated_11 _11_12.html
http://www.macprovideo.com/hub/final-cut/fcp-x-voice-over-editing-short-takes
http://www.macprovideo.com/hub/final-cut/fcp-x-voice-over-editing-long-projects
http://fcproxuniversity.com/FCPro_X_University/Extra_Credit/Entries/2012/11/11_C opy_%26_Move_Events_%26_Proejts_2.html

Similar Messages

  • How can i add effects to voice over .. i can't find voice effects in the latest version 10.0.1

    how can i add effects to voice over ..
    i can't find voice effects in the latest version 10.0.1

    aysar8 wrote:
    how can i add effects to voice over ..
    http://www.bulletsandbones.com/GB/GBFAQ.html#trackeffectequivsgbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". What am I doing wrong?

    I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". Wha am I doing wrong??

    never mind.  i think it just makes you review the information -- it looks like you have to click through everything.

  • How to unlock ipad with voice over?I even entered my correct password byt the voice over kept on saying it's wrong? 0409 is my password how come its wrong.. and the voice over kept on saying zero has no value?

    how to unlock ipad with voice over and password?  i already entered my correct password the voice over kept on saying its wrong..my password is 0409.. and the voive over says"zero" has no value?

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • How do I get a voice over from garage band into Final cut x?

    How do I get a voice over from garage band into Final cut x?  Sorry if this is a newbie question.  I have been editing in final Cut express on my MacBook Pro and just jumped to a new iMac and Final Cut ProX.  Trying to record my own voice on a Yeti mic and import it as narration for a video.  Thought I could simply import media but X has it greyed out.

    Sharing with iTunes is OK, but it is likely to produce a file in MP3 or AAC, which can cause problems. You can create an AIFF version of an MP3 file in iTunes and use that.
    To create an AIFF version, go to iTunes/Preferences and click the General Tab. Click the Import Settings button. Choose Import Using: AIFF Encoder. Then choose your track, and click FILE/CREATE AIFF Version. Use this in FCPX. Be sure to go back into iTunes Preferences and set the import options back to where you had it, so the next time you rip an CD it does not make an AIFF.

  • How do i turn off voice over in iphone 4GS

    how do i turn off voice over in iphone 4gs
    thank you

    Turn Voice Over off:
    Press Home.
    Tap Settings. Then double-tap Settings.
    Tap General. Then double-tap General.
    Use three fingers on the screen to scroll to Accessibility.
    Tap Accessibility. Then double-tap Accessibility.
    Tap VoiceOver. Then double-tap VoiceOver.
    Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

  • How to add effects with snow?

    How to add effects with snow like Apple does when the introduce a new product?

    Flex Builder Help. Basically pressing F1 in Flex Builder or
    Help -> Help Contents menu option.

  • How to add effects

    Hi,
    I need to know how to add effects. I am doing this, I hav 3
    vbox and 2 hbox in run time if i need to bring the mouse over 1
    vbox it need to come in the complete screen. Can any one send me
    the code fot it.
    Regards
    Muthu

    Flex Builder Help. Basically pressing F1 in Flex Builder or
    Help -> Help Contents menu option.

  • Do I Have to Upgrade to Premier in order to burn a slide show to CD or DVD if it has an audio track?

    I currently have PSE 8.  I have successfully created my first slide show that incorporates a purchased audio track downloaded from internet.  It plays just fine on my computer, but when I try to burn it to disc I only get the slide show without music.  This is for an anniversary, so I am on a deadline to fix this dilemma.  Can anyone help me?

    Do you know if it is Vista Home Premium?
    If yes or if you are not sure, look for Windows DVD Maker,
    On my Vista Home Premium laptop whe I click on "All Pprograms", within the list of programs I see "Windows DVD Maker" listed as a program.
    If you have this program then my suggestion is to use the PSE slide show editor to Output a file to your hard disk
    (use the
    -- the "Save to a File"  instead of the "Burn to a Disc"
    and
    -- the "Movie File - .wmv"
    and for slide size choose:
    DVD-NTSC if in USA
    or DVD-PAL if in Europe or other PAL TV country
    Save the wmv file in a hard drive folder where it will be convenient for you to reference for later use in the Windows DVD Maker program.
    Once this wmv file has been successfully created, you can play it back with Windows Media Player to verify that you like its contents.
    Your next step will be to use the Windows DVD Maker program to write the formats of movie files required for the TV DVD player playback to the DVD disc. I recommend closing Photoshop Elements and then open Windows DVD Maker from the Windows Start menu list.
    Windows DVD Maker is a "follow the instructions on the screen" program.
    However, one point of confusion is how to add the PSE created slide show to DVD Maker program.
    The answer is that you use that .wmv file (from the PSE slide show editor) -- it is now in a video format and is a "video". So you can follow the onscreen directions to add video to DVD Maker.
    Note 1: I recommended closing PSE before starting the Windows DVD Maker in order to conserve your PC system resources. It is probably not absolutely necessary.
    Note 2: You could also produce the DVD for TV playback by adding Adobe Premiere Elements to your computer.  However just for the purpose of making the DVD from your slideshow I anticipate that using Windows DVD Maker will be simpler and faster.
    Note 3: I recommend using a DVD-R disc. What brand of discs do you have?

  • Logic Pro X - How do I record my voice over existing tracks (via a mike and audio interface) without hearing those tracks on the speaker. I have headphones plugged into the interface but it doesn't stop in coming out of the speakers?

    I'm new to Logic Pro X and can't work out how to record my voice over existing tracks without them playing over the speaker. I'm using a Sure mike through an audio interface and have headphones plugged into the interface?

    Hi Kevin, what kind of audio interface do you have?

  • Logic X version10.0.7 won't let me record two audio tracks simultaneously how can I rectify this please?

    I've got two mics set up through my Focusrite Scarlett 2i4 on Audio tracks 1 and 2 on Logic.  Both channels seem to be reading the signal ok.  However, when I go to record anything only  track 1 or 2 record any signal and not simultaneously.
    If anyone has had similar problems or can help me it would be very much appreciated!

    Hello, yes I am using Mono tracks.
    The input select is greyed out as can be seen in the screenshot.  It won't allow me to do anything!

  • A narrow black bar with text in it telling me what I am doing, has appeared on my screen. Also, there's a voice over speaking the same thing. How can I get rid of it?

    I was checking out some keyboard shortcuts when a black bar appeared with white letters repeating letters as i type. Then telling me where i am and what I'm doing. Also a voice over started, telling me what I was doing. How can I stop this and get rid of the black text bar? It even creates text boxes and things without asking. Help!

    THANK YOU SO MUCH!!!! This is the first time I've had a question and it was answered within the first click.  Silly cat decided he wanted to play on my computer and turned on a bunch of weird stuff. Including this. 

  • How can I record a voice over and save as MP3?

    Good morning! I do voice overs. In my studio I STILL have a PC and use adobe audition. For my day to day business I know have a MAC BOOK PRO. I am going on vacation and need to record on my MacBook Pro with Garage Band.
    I have successfully set up my Mic(studio Projects C1) and my travel PreAmp (MAudioDuo) to record in Garage Band. All I need is dry voice. I have recorded a track but need to save is as an MP3. The test track I recorded is about 15 seconds long but yet plays for 30 seconds...I have deleted everything after the voice but it still seems like the track is longer. I have to put in MP3 format. How do I do this? This is a nice program but looks like it is too much for what I need it to do. So, any other recommendations on more appropriate software is appreciated if needed.
    Message was edited by: suesmac

    yet plays for 30 seconds.
    move the end of project marker to the 15 second mark:
    http://www.bulletsandbones.com/GB/GBFAQ.html#eos
    I have to put in MP3 format.
    when you "share" it, tick the Compress checkBox
    any other recommendations on more appropriate software
    any audio editor could be used as well:
    http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors

  • How do I get the voice-over in timeline to work.

    I moved the "R" and "microphone" buttons to the audio track, nothing happens when I click the buttons (the "R" is suppose to turn red). My USB microphone appears in audio hardware and is selected in System Prefs. Using Premier Pro 8.1 on new MacPro

    I don't believe there is such a thing on the Mac Pro (trash can), but I did finally get something to work with a not-very-instinctive combination of System Preferences (select USB mic), Audio MiDi Setup (select USB mic), and Premier Pro Preferences, Audio Hardware (DO NOT select the USB mic, but rather the System Default Input/Output). No other combination worked (I tried them all), and when I tried changing Audio MiDi settings while Premier Pro was running, I'd occasionally get the endless spinning wheel that required a re-start. Even with all this, one channel was peaked-out with noise (source?) which I couldn't eliminate with any settings (can do it in post, however). Overall a disappointing experience. I don't know why the Audio MiDi Setup has to be involved, or why this was so difficult with my set-up (I'm not ruling out user error).
    Any further advice is more than welcome,
    David

  • How can I add effects to voice while recording

    Hey
                  Ok logic pros and users   heres and important question ....     I have my vocalist comming over and he likes a bit of effect on his voice that gives him the sound like it would be recorded  I recorded him last time on a tascam mk-2  with effects like reverb and some guitar effects which really enhanced his voice.  He s using a compression mic  so i do have to watch passing gas while hes recording because it will pick it up lol
                  What can I do on the audo track while setting up his voice to enhance his singing to the point that it will sound extremely good and not bland ..    What I am trying to say he sounds like jeff tate  and I want a tate voice like the album while hes recording i gives him an uplift and higher range
                                                                      Thanks

    well, it should go without saying... there's no magic bullet here. Either someone can sing or they can't. The first step to them sounding good is their own ability.
    Beyond that, a good quality microphone into a decent mic pre-amp is important.
    Ok, so, after stating the obvious... (which I'm amazed at how many people STILL think software will make them a good musician....)
    For monitoring, you could start with any channel strip setting in the vocal category. Most will be over the top, in terms of what you need, but it'll get you started. You'll have to watch latency though. Depending on your audio interface, and how well the drivers were written, will determine if there's noticeable delay in the singers headphones. But a little reverb or delay inserted right on the channel strip will let him hear the FX as he sings.
    If you want to actually print these FX to tape, you will need to record through an input object.

Maybe you are looking for

  • Access @Variable('DBUSER') in a JSP Page

    Is there a way to access the @Variable('DBUSER') within a JSP page.  We are using this variable as the client ID in our WEBi reports and Analytics.  We would also like a way to tell what client is logged in when using a Web Page analytic on a dashboa

  • Comparison of two structures excluding one field

    Hi, I need to make comparisons of two complete data structures, excluding from the comparison one field that should not be compared or considered to obtain a result of equality of both structures. Somebody know a sentence or practical way to make thi

  • Error with Sql*Plus and Spatial

    When i create a new table with a column SDO_GEOMETRY (spatial), i insert a new field. When i do a simple select * from this table, i receive this error : SP2-0591: Unable to allocate dynamic space needed (37748736 bytes) I can't find any information

  • Best way to access/deal with ResultSet !! ????

    Hi Friends, My Current strucuture of coding is a Centralised Java Bean which act as Connection Object Supplier Program to all JSP which needs DB Connections. So In my Jsp i used to hook a method of Java Bean which provides Connection from WebSphere D

  • Don't stop at the first error in validateEntity

    I'm working with JDeveloper 10.1.2, ADF BC, Struts and JSP. I'm using the validateEntity method and my application stops when one validation's error is detected and only this error is showed. I'd like to show a list with all errors detected in the va