FCPX media import import window does not match finder

So I am trying to import media from Drive:PROJECT01/COT OODOODD/CONTENTSA/ as you can see what I see in finder is not what I get in FCPX media import window... ??

it seems if I close down FCPX and restart everything is fine - mmmn not very useful.
Is this a 'known issue'?
So long as I leave the camera contents folder named as 'contents' then X will unwrap the mxf files inside - which is fine - but why does the media import window not refresh when I edit names and content in finder without having to restart FCPX?

Similar Messages

Import window does not open automatically as it did in LR3?

Import window does not open automatically as it did in LR3?

In >Preferences >General Tab make sure that the box <Show Import Dialog when a memory Card is detected> is checked.

I am not able to import a audio CD the import window does not show up

I am trying to import a music CD but the import window does not show up and the cd does not copy into itunes.

Hello Kathryn,
Thank you for the details of the issue you are experiencing when trying to import songs from a CD. I recommend following the steps in the section titled "If you have trouble importing songs from an audio CD" in the article below:
iTunes 11 for Windows: Import songs from CDs
http://support.apple.com/kb/PH12486
Thank you for using Apple Support Communities.
Best,
Sheila M.

After connecting my Sony camcorder to imac (Snow Leopard) to import a video the import window does not open. I have imported videos from the sam camcorder successfully before. What could have happened? Puzzled)

After connecting my Sony camcorder to Imac (Snow Leopard) to import a video to imovie 09 the import window does not open. In the past I have successfully imported videos from the same camcorder. What could have happened? Puzzled

Oh my! Obviously, I don't know what I'm doing. But I do know that my goal was to do both---backup AND free some space. My iMAc is old (2006) and I upgraded it a year or so ago to Snow Leopard. I didn't think I had the capability of backing up without an external drive, but maybe I do since I upgraded. Do I?
But I bought this My Book mostly for freeing space because I like to make cards in Photoshop and I'm forever running out of space when I get too many layers (don't really know what I'm doing there, either).
Is there some way that I can rectify my mistakes and start all over?
Thank you so much for beng so prompt with your reply and patient with mine. I tried for so long to see the dialog box with the library listings. When I launched iPhoto, even with holding down the Option key, it kept immediately launching into the full screen. Finally, after an hour of doing it over and over again, it worked when I held the key down for 5 minutes. Then when I was typing my reply, I kept getting a message to "Request Time Out." Didn't know how to do that, so kept hitting the OK button and kept typing for another half minute. Finally, when ready to send, Safari couldn't do it. "Try again" exasperated me until I realized I would have to begin again and use Firefox. When I got there and ready to type, I got the message that my message had been retrienved and did I want to use it?!!
So your kindness is very much appreciated.

My import window does not allow me to pick the "move" option. How do I access it?

My import window does not allow me to pick the "move" option. How do I access it?

Because Adobe has taken the stance, within Lightroom, that it will not touch files on card. Your card serves as a fail-safe backup in the event of disaster.
Ejecting a card has no effect on your images and is allowed so that you can removed the card without intervention of the OS.
After you've ensured image fidelity and backup, accepted best practice is to reformat your card in-camera. Trust me, I don't want to be on this forum answering questions about why someone lost their files because they "moved" them. This has been debated many times on the forum.

IMovie '13: Import window does not open

I can't get the Import Window to open. (Sure it worked the first time I tried)
Anyone with same problem?
Anyone with a possible solution?
No matter if I press Import in the toolbar or use the menu (cmd I) the main window will dim, but the overlaying Import Window will not open.
After that I can only quit the program. I can drag and drop movie files without problems.
The only way the Import Window will open is to attach my camera. The Import Window will open automatically when iMovie sees the drive.
I have tried to re-install iMovie and deleted preference files, but with no succes so far.

I managed to locate the problem
I have an Elgato EyeTV 610. It is an old DVB-C TV Tuner hooked up on Firewire.
When I remove the EyeTV 610 from the Firewireport it works fine.
As mentioned in my first posting I was able to have the import window pop up by attaching my camera.
The workaround also works when pluggin in my iPhone (Import window pops up automatically)

Image on monitor window does not match red playhead as it moves

While editing a movie, imported slides do not match the monitor view. As the red playhead moves along to the right, when a slide changes the image on the monitor remains on the previous slide. After about 15 secs the next slide appears, but briefly then it's on to the next slide.
This is annoying. I have tried everything I can think of to overcome this (eg rebooted, pulled the plists, varied length of slides, started new movie etc). Fortunately, it does not happen with imported movies from the video camera. I can overcome the problem by placing transitions between all the slides, eg use a one-frame cross-disolve, but I'd rather not have to trick it this way. Does anyone have any ideas on this please? Thanks,
Keith

I also had the same problem. I have discovered that it is due to the upgrade of Quicktime. To reinstall an older version of Quicktime is quite tricky but I have solved the problem. There is no need to uninstall Quicktime 7.6.6. as this will be done later during the installation of the earlier software. Try this: Download a copy of Pacifist. From www.mac.oldapps.com download a copy of Quicktime 7.6.4. Open Pacifist, drag the installer box icon of QT 7.6.4 onto the Pacifist window. Click open package. When asked click "Replace" check the "all" box. This will over-ride QT 7.6.6 replacing it with 7.6.4 and your problem should be solved. Good luck! Let me know how you get on, please.

Image on monitor window does not match playhead as it moves

I am resurrecting this earlier thread because, although it received a star as "solved" it was not really solved. Since upgrading to Quicktime 7.6.6 I, too, have had similar problems, as apparently have several others.
Basically, on iMovie playback the playhead will skip through a still, so that the playback on the screen lags behind, and then will suddenly catch up by displaying the skipped still in a shortened duration as the playhead moves on. Makes it difficult to edit. Video clips are not affected. With me the issue occurred after I upgraded to Quicktime 7.6.6. Oddly, when I reverted back to the previous version, 7.6.4, the problem still persisted. I did the usual deletion of the com.apple.iMovie.plist file, and a permissions repair, but that did not help.
So, I am interested in whether anyone has solved this issue. There are workarounds, like inserting a one frame cross-dissolve and converting the stills to video by using Ken Burns with the same starting and end points. I am more interested in actually resolving the issue. Comments welcome.

Hi Rich 839. I also had the same problem. I have discovered that it is due to the upgrade of Quicktime. To reinstall an older version of Quicktime is quite tricky but I have solved the problem. There is no need to uninstall Quicktime 7.6.6. as this will be done later during the installation of the earlier software. Try this: Download a copy of Pacifist. From www.mac.oldapps.com download a copy of Quicktime 7.6.4. Open Pacifist, drag the installer box icon of QT 7.6.4 onto the Pacifist window. Click open package. When asked click "Replace" check the "all" box. This will over-ride QT 7.6.6 replacing it with 7.6.4 and your problem should be solved. Good luck! Let me know how you get on, please.

Receipt Qty in AP invoice does not match with actual receipt qty.

Hello everyone,
I am facing an issue in oracle Payables module. When we match invoice with receipt while preparing invoices, Quantity received shown in the Receipt quantity block in invoice window does not match with actual receipt quantity of that item. Due to this difference user is not able to book the invoice. Please help me to resolve this issue.
Thanks,
Himanshu Gupta

Exactly. What i mean is in the invoice window, There is a block called reciept quantity shown in the lower part. The received quantity displayed in that block is more the actual quantity being recieved. (when we see the recieving transactions). is this a bug?
thanks for your reply, awaiting your response......
Himanshu Gupta

V5R4M5 does not match InfoAPAR version V5R4M0, import error

Hi All,
We found following warning when PTF check in ECC6sr3 sapinst on v5r4
WARNING: The OS/400 version V5R4M5 does not match InfoAPAR version V5R4M0.
ok Product ID: 5722SS1 - PTF ID: SI22389 - Status: NOT UP TO DATE
ok Product ID: 5722999 - PTF ID: TL07282 - Status: NOT UP TO DATE
CUMPKG
ok Product ID: 5722999 - PTF ID: MF42358 - Status: NOT UP TO DATE
ok Product ID: 5722999 - PTF ID: MF42518 - Status: NOT UP TO DATE
ok Product ID: 5722999 - PTF ID: MF42529 - Status: NOT UP TO DATE
ok Product ID: 5722999 - PTF ID: MF42394 - Status: NOT UP TO DATE
ok Product ID: 5722999 - PTF ID: MF42393 - Status: NOT UP TO DATE
ok Product ID: 5722999 - PTF ID: MF42258 - Status: NOT UP TO DATE
ok Product ID: 5722999 - PTF ID: MF42043 - Status: NOT UP TO DATE
ok Product ID: 5722999 - PTF ID: MF42042 - Status: NOT UP TO DATE
ok Product ID: 5722999 - PTF ID: MF41883 - Status: NOT UP TO DATE
   23 PTFs checked.        11 missing PTFs detected.
The microcode is M5 however OS is M0. We also got similar warning in other host with 2 missing PTFs and SAP installation can successfully completed. But with this M5 host always warns with TL07282 missing (however TL57282 existed)
we checked APAR recomendation for v5r4m5 from IBM, products, and sysval, tmksvrpatch, all are sufficient only this PTF check from SAPinst. When we continue, the import processes are failed
(DB) ERROR: DDL statement failed
(CREATE TABLE "DDNTF_CONV_UC" ( "TABNAME" GRAPHIC(30) CCSID 13488 DEFAULT ' ' NOT NULL , "BLOCKNR" SMALLINT DEFAULT 0 NOT NULL , "FIELDSLG" DECIMAL(5,0) DEFAULT 0 NOT NULL , "FIELDS" BLOB(32600) ) )
DbSlExecute: rc = 99
(SQL error -901)
error message returned by DbSl:
SQL system error. MSGID= Job=009618/SAPINST/QJVAEXEC
(IMP) ERROR: DbSlPrepare/BegModify failed
rc = 103, table "DDNTF_CONV_UC"
(SQL error 204)
error message returned by DbSl:
DDNTF_CONV_UC in R3ECDDATA type *FILE not found. MSGID= Job=009618/SAPINST/QJVAEXEC
TRACE: 2008-09-10 11:14:29 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
/usr/sap/ECD/SYS/exe/run/R3load -i SAPNTAB.cmd -dbcodepage 4102 -l SAPNTAB.log -nojournal
ERROR: 2008-09-10 11:14:32 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is interrupted with R3load error.
Process '/usr/sap/ECD/SYS/exe/run/R3load -i SAPNTAB.cmd -dbcodepage 4102 -l SAPNTAB.log -nojournal' exited with return code 2.
For mode details see 'SAPNTAB.log' file.
Standard error output:
¢u2014u2014u2122
What seems missing to check? We are on applying the mssing PTF but still stuck with PTF not fuond from media msg . Thanks for reading the details.
Regards,
-asp-

Hi -asp-,
From your description it is not clear to me whether you checked against infoapar.455 or not. If you missed this, follow the descriptions of note 144149.
Regarding the SQL -901 you need to look up the joblog of the failing process and check the messages right before the SQL -901 for the real reason.
HTH,
Thomas

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

ITunes drag to import new songs in library or to create playlists from folders on windows does not work!

iTunes drag to import new songs in library or to create playlists from folders on windows does not work!
WHY? I have to solve, how can I do? Thank you

up

ORA-23327: imported deferred rpc data does not match GLOBAL NAME of ..

Hi,
We took an export of a production database in Oracle 9i (9.2.0.7) and created a new database on a test server with Oracle 10g (10.1.0.5)
The original production database was called DC20 and our new test database is called SD20.
Looking at the logs after the import we're seeing this error:
"ORA-23327: imported deferred rpc data does not match GLOBAL NAME of importing db"
We've looked into it a little and it seems to make sense because the names of the databases are different, and from what we've read, we really didn't need to do a full import including SYSTEM anyway. We also came across a solution telling us:
"If you are not using Replication on the target database, these errors can be ignored. However, you should subsequently remove all the replication objects by running:
$ORACLE_HOME/rdbms/admin/catrepr.sql, then catproc.sql"
What I was wondering was if someone could validate that running these scripts and ignoring the errors will be ok, or if they'll cause us issues further down the line.
In case its needed, heres my Export parameter file
"FULL=Y
DIRECT=Y
LOG=E:\Exports\DC20\Log\expDC20.LOG
FILE=E:\Exports\DC20\Data\DC20.DMP"
and heres my Import parameter file
"FULL=Y
COMMIT=Y
GRANTS=N
IGNORE=Y
BUFFER=500000
FILE=E:\Imports\SD20\data\SD20.dmp
LOG=E:\imports\SD20\log\impSD20.LOG"
Thanks for your help!

Thanks Neil, we did already see this note and added it to our list of possible solutions. After we found this one, we also found the one I quoted, which would seem to be the path of least resistance (it would save a good 10 hours in import time if nothing else).
However, if we can't do what I'm asking about in my original post however, the note you mentioned will be our next route..

IMPORT Target Portal does not match the Source Portal version

Hi,
Executing the import via the command line gives me the following error: Error: Target Portal does not match the Source Portal version
Cannot proceed with Import
Checking the output of the script tells me that the portal source has version 9.0.2.6 and the target 9.0.4.0.
Does this mean that there is no backwards compatibilty?
How should I continue from here?
Best Regards

Portal Export/Import utilities are designed only to work between Portals which are at the same version level.
For more information, please see this section in the Portal Export/Import FAQ for 9.0.2.6:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/9023_EXPORT_IMPORT_FAQ_0308.HTM#question_5
OracleAS Portal allows you to upgrade your existing content to the latest release of Portal.
What you need to do in your particular case is to upgrade your existing portal installation from 9.0.2.6 to 9.0.4 before using Portal Export/Import between your two portal instances.
Best Regards,
Harry

FCPX media import import window does not match finder

Similar Messages

Maybe you are looking for