Fcpx project not appearing in project library

A project that is in the Final Cut Projects folder, both within its own folder and in the FCP Projects folder, is not appearing in the Project Library within FCPX and therefore cannot be opened. This happened suddenly in the middle of an edit that had begun yesterday. The files imported into the appropriate FC Event folder is there and all the other FCP projects I've done which are visible in the FCP Projects folder in Finder are visible within the FCP Project library except this one. Any ideas?
Thanks,
JT
Oregon

Here are my events within Final Cut
And here are the "contents" of my folders within the "bees1" Library
A message popped up while I was editing saying my drive was almost full so I deleted files unrelated to the project or event I was working on this ended up happening. It is not the first time this happened.
Thank you for your time.

Similar Messages

I started using icloud a few months ago- I now have music on my iphone purchased over a year ago which does not appear on my library on the computer- how can I get it off my iphone?

I started using icloud a few months ago- I now find I have music on my iphone that my daughter purchased last year- I can't get it off as it does not appear on my Library on my pc. Any ideas- other than banning daughter from my account!

Add all the songs you want to burn the playlist onto the disk.
Best Regards, Brandon.

Pictures not appearing in iphoto library

I'm using version 2.0.1 of iphoto. Some of the pictures that are in my picture folder will not appear in the photo library. I have "rebuilt" iphoto, but some of the more recent pictures do not appear in the library. Any ideas on what else I could do to get all my photos to appear in the library.
iMac Mac OS X (10.4.8)

Some of the pictures that are in my picture folder will not appear
in the photo library
That's not surprising since iPhoto 2 wouldn't have any way to know anything about photos that haven't been imported into iPhoto. Your Pictures folder isn't the same as your iPhoto Library folder.

HT201272 A lot of my songs, once put on the iCloud, will not download to my iPod. They are on my iTunes, already downloaded, but will not appear in my library on my iPod. Before I started using iCloud, all music in my iTunes library was on my iPod.

A lot of my songs, once put on the iCloud, will not download to my iPod. They are in my iTunes library, already downloaded, but will not appear in my library on my iPod. There is no common thread for the origin of the songs--many were ripped from CD's, others purchased in the iTunes store. Before I started using iCloud, all music in my iTunes library was on my iPod without any issues.

- Are you saying that they are not listed in your Purchased section?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Are they listed in your Puchases history when you log into your account on your computer?
- Are they still available now for purchase? If not then you are out of luck
If they are still available and listed in your Puchase History then contact iTunes
http://www.apple.com/support/itunes/

Why do new items not appear in my library?

I have noticed that new song, movies, etc. do not appear in my library under iTunes 10.7 I can see them in the Recently Added playlist, but not in my library. I just bought The Avengers. The digital copy downloaded and installed to my iTunes and I synced it to my iPad, but it is not in the library under Movies. Likewise the free MP3 Avengers Assemble album is not there. Apps I buy do show up in the list and do update.

This happens when you apply a motion tween to a shape that
wasn't converted to a symbol *first*. For
reasons of organizing and managing a flash doc - always
convert shapes/images to a symbol forst -
then apply motion tweens.
If you delete these "tween" symbols in the library - the
animation on stage will be lost -
animations (specifically symbols) reference the symbols in
the library.
Search help docs for "symbols" to learn how Flash works in
this regard.
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
MarkSLC wrote:
> In my Flash document library I noticed all these Tween
entries ( Tween 1, Tween
> 2, Tween 3, etc.). I didn't expressly create them or
name them, they just
> appeared. Can someone tell me what's up with this?
Should I keep them? Delete
> them? I'm pretty new at Flash. Thanks.
>

Aggregator exe project not opening another project

aggregator exe project not opening another project when published.
The same works fine in HTML.
I tried in Captivate 7 and 8 as well.

I'm having a similar issue. I've used a "home" button to return to the main menu of the course. However, all it does is return me to the last screen I was on. I've tried linking the button to a the aggregator htm and to the swf. Neither gives me the results I want. I currently have it set to open in the current window. However, I get the feeling that it's automatically invoking a bookmarking feature and I'm not getting the pop-up box asking me if I want to return to the last screen or not.

Film does not appear in Itunes Library

Itunes crashed during playback of a movie and now after a restarting both Itunes and my computer separately the film does not appear in my library. I (probably me being silly) cannot seem to find a method of re-downloading the product even though the item appears in my account history as being purchased. I would very much like to be able to find this item in my library again.

Have you searched your computer to see if the film is still on your computer, just not in iTunes - by default on Windows 7 your iTunes library is stored under :
\Users\username\My Music\iTunes
If it is then you can add it via File > Add To Library.
If not then whether you can redownload a film depends upon what country that you are in (they can't be redownloaded in all), and if the film is still in the store (rights-holders occasionally remove their items from the store) - and whether you've changed countries since buying it. If you can redownload it then it will show under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes - if other films show there but not that one (and it's still in the store) then check to see if it's hidden : iTunes Store: Hiding and unhiding purchases.
If you can't redownload it then do you have a copy of it on a backup of your library/downloads that you can copy it back onto your computer from ?

All songs on my ipod do not appear in my library any way of doing it?

all songs on my ipod do not appear in my library any way of doing it?

Morning zapho54,
Thanks for using Apple Support Communities.
For information on this, take a look at this article:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/ht1296
and
For more information on this, take a look at this article:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Hope this helps,
Mario

HT203477 FCPX is not recognizing my project files.

When I open FCPX the raw footage is there, but none of the edited projects appear. I did an update and ever since FCPX won't locate my project files.

Hopefully zaimpaine's problem has been solved in this past month. If zampaine or anyone else could provide the solution that would be greatly appreciated. In my case, there also is no Updated Projects Event. Projects started in the last few days disappear from FCPX and the Project Library even though the project file is visible in Finder, both in the Final Cut Projects root file and within its own subfolder and all the other, older projects are still clearly visible in the Project Librarty.
Many thanks in advance,
JT
Oregon

FOC items with bill rate as "0" are not appearing in project invoice

Customer has a unique requirement of billing resources working on the project for free due to business reasons.
The issue is that the FOC items with bill rate as "0" are not appearing when the invoice is generated.
Please let me know if any one has come across this kind of a requirement and please share if you have any workaround.

Hi
You may try setting the bill rate for those cases as 0.01.
That way the items will be included in the invoice, but not affect dramatically the amount billed to customer.
Dina

Photos do not appear in projects Aperture 3.5.1

When selecting a project on the sidebar, the photos that it contains do not appear in the main viewer area.
If that particular project then appears under the automated "Recent" header, selecting it allows the photos to appear as normal.

Check the filter settings when looking at the project from the sidebar.
It's an Aperture weirdness but the filters on the Browser view of the project in Recents can be different then the filters set on the project when viewed by clicking on it in the sidebar.
The reason being that what looks like a project in Recents is actually a smart album.

PS Project not appearing in cProjects Accouting tab

I am able to create the PS Project from cProjects through status management (Flag for transfer) after the required accounting intergation and other configurations.
However, I have a concern when I am linking an existing PS project to a newly created RPM Item and cProjects Project.
I carried out the following:
1. Created a PS Project with a WB Structure
2. Created an RPM Item (with auto creation of cProjects Project)
3. Under the item, uploaded the PS Project created under step 1, to the item
4. Saved the upload
Result:
The PS Project structure is replicated in the cProjects operational project.
Concerns:
We now want to synchronize the accounting aspects in PS from cProjects Project (like we do when we mark a cProjects project to "Flag for transfer"). However, the newly linked PS project does not appear under the "Accounting" tab in cProjects.
Please advise.
Summary:
Having linked an exisiting PS project to a new created item and cProjects project, we want the operation to continue as if the PS project was created by flagging the cProjects project.
Thanks.

Thanks... this helps me get to a part of the problem.
Now that I have RPM item and a cProjects project linked to a PS project, I can manually link the cProjects tasks stc. to the PS WBS elements as relevant.
In such a case, how will "Falg for Transfer" imopact this project? I mean, whereas "Flag for transfer" in other cases create a new PS project which we can see under the accounting tab, what happens when we set this status after we have manually linked the cProjects project to a PS Project. Also, how does the accounting updates take place in this scenario (from the cProjects front end)?
Thanks...

Template does not appear in project folder

Hi
My template has disappeared from my project. Therefore, I
have tried reimporting the template to the 'Templates' folder in
the project folder. When I do this, I do not get an error message.
But the *.htt file does not appear in the 'Templates' folder and I
cannot attach it to help texts?? When I open my file manager I can,
however, see that the *.htt file is indeed placed in the current
project. Can anybody help?
Thanks
Lena

Yep! These forums are littered with problems caused by
working over a network. RH is essentially an Access DB and this has
well documented problems with networks. Work off your hard drive
and back up to your network each night. That's works for me. Try
importing your template once you've copied your project to your PC
and come back if you still have problems. You may have to recreate
your template as it is not impossible that the .HTT file has become
corrupted.

.MOV video clips do not appear in project window

I've imported .MOV clips but while they display thumbnails, they do not appear in the project window. Is there a way around this?
Thanks, David

By complete accident I discovered that I had to display advanced tools and then select the edit tool. Then when I selected a clip in the thumbnail window it appeared in the project window. However, I'm now puzzled about how to edit the start and stop points of a clip. Before I got the clips in the project window I was able to select a portion of a clip and clip the reject (X) tool and then move the rejected portion to the trash. Now that the clips are in the project window I'm trying to use the tool to trim the start and end of the clip but it isn't cooperating. What's the process?
Thanks for your help.

Process does not appear in project explorer

Hi all,
I have a little problem with NWDS: I moved a process dc from one SC to another and now the DCs does not appear anymore in the project explorer and thus I can not edit the process and it entities any further, Can anybody help me out here?
Thank you

Go to development infrastructure perspective, refresh the projects, select the DC and select "create project"

Fcpx project not appearing in project library

Similar Messages

Maybe you are looking for